Skip to content

O
ORS Hardware
Commit 9f0ef2dc authored by Jean-Marc Ouvrard's avatar Jean-Marc Ouvrard Committed by Thomas Gambier
Browse files
Options

hardOrsTypeC: small changes on Signal Track

parent 941ce1e0
Expand all Show whitespace changes
Inline Side-by-side
Showing with 27338 additions and 26725 deletions
hardOrsTypeC/Design Rule Check - OrsTypeC.drc 0 → 100644
View file @ 9f0ef2dc
Protel Design System Design Rule Check
PCB File : V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
Date : 04/05/2023
Time : 11:33:00
Processing Rule : Clearance Constraint (Gap=0.35mm) (InNetClass('HighIsolation')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
Rule Violations :0
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0
Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0
Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0
Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
Rule Violations :0
Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0
Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
Rule Violations :0
Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
Rule Violations :0
Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
Rule Violations :0
Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
Rule Violations :0
Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.6mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
Rule Violations :0
Violations Detected : 0
Time Elapsed : 00:02:18
\ No newline at end of file
hardOrsTypeC/Design Rule Check - OrsTypeC.html 0 → 100644
View file @ 9f0ef2dc
This diff is collapsed.
hardOrsTypeC/ORS_TypeC_8Layers.OutJob
View file @ 9f0ef2dc
......@@ -17,11 +17,11 @@ RevisionNamingSchemeGUID=
[OutputGroup1]
Name=ORS_TypeC_8Layers.OutJob
Description=
TargetOutputMedium=Gerbers
TargetOutputMedium=Pick And Place
VariantName=[No Variations]
VariantScope=0
CurrentConfigurationName=
TargetPrinter=Microsoft Print to PDF
TargetPrinter=PDFCreator
PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintWhat=0
OutputMedium1=Print Job
OutputMedium1_Type=Printer
......@@ -50,7 +50,7 @@ OutputName1=NC Drill Files
OutputCategory1=Fabrication
OutputDocumentPath1=
OutputVariantName1=
OutputEnabled1=1
OutputEnabled1=0
OutputEnabled1_OutputMedium1=0
OutputEnabled1_OutputMedium2=0
OutputEnabled1_OutputMedium3=0
......@@ -68,7 +68,7 @@ OutputName2=Gerber Files
OutputCategory2=Fabrication
OutputDocumentPath2=
OutputVariantName2=
OutputEnabled2=1
OutputEnabled2=0
OutputEnabled2_OutputMedium1=0
OutputEnabled2_OutputMedium2=0
OutputEnabled2_OutputMedium3=0
......@@ -185,7 +185,7 @@ OutputName7=PickPlace-ORSTDDB39
OutputCategory7=Assembly
OutputDocumentPath7=
OutputVariantName7=TDDB39
OutputEnabled7=0
OutputEnabled7=1
OutputEnabled7_OutputMedium1=0
OutputEnabled7_OutputMedium2=0
OutputEnabled7_OutputMedium3=0
......@@ -365,7 +365,7 @@ OutputName14=PickPlace-ORSTDDB40
OutputCategory14=Assembly
OutputDocumentPath14=
OutputVariantName14=TDDB40
OutputEnabled14=0
OutputEnabled14=1
OutputEnabled14_OutputMedium1=0
OutputEnabled14_OutputMedium2=0
OutputEnabled14_OutputMedium3=0
......@@ -383,7 +383,7 @@ OutputName15=PickPlace-ORSTDDB41
OutputCategory15=Assembly
OutputDocumentPath15=
OutputVariantName15=TDDB41
OutputEnabled15=0
OutputEnabled15=1
OutputEnabled15_OutputMedium1=0
OutputEnabled15_OutputMedium2=0
OutputEnabled15_OutputMedium3=0
......@@ -534,7 +534,7 @@ FFmpegPixelFormat3=0
FFmpegQuality3=80
WmvVideoCodecName3=Windows Media Video V7
WmvQuality3=60
OutputFilePath4=Z:\ors-hardware\hardOrsTypeC\Project Outputs for OrsTypeC\
OutputFilePath4=V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\Project Outputs for OrsTypeC\
ReleaseManaged4=1
OutputBasePath4=Project Outputs for OrsTypeC
OutputPathMedia4=
......@@ -547,7 +547,7 @@ OutputFileNameMulti4=
UseOutputNameForMulti4=1
OutputFileNameSpecial4=
OpenOutput4=0
OutputFilePath5=Z:\ors-hardware\hardOrs\Project Outputs for Ors\
OutputFilePath5=V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\Project Outputs for OrsTypeC\
ReleaseManaged5=1
OutputBasePath5=Project Outputs for OrsTypeC
OutputPathMedia5=
......@@ -636,7 +636,7 @@ OpenIPCOutput2=0
EnableReload2=0
RelativeOutputPath3=C:\NewProj\UmTRX\UmSEL\UmSELv2\Project Outputs\UmTRXv2_RxSel.wmv
OpenOutputs3=1
RelativeOutputPath4=Z:\ors-hardware\hardOrsTypeC\Project Outputs for OrsTypeC\
RelativeOutputPath4=V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\Project Outputs for OrsTypeC\
OpenOutputs4=0
AddToProject4=0
TimestampFolder4=0
......@@ -646,7 +646,7 @@ OpenGerberOutput4=1
OpenNCDrillOutput4=0
OpenIPCOutput4=0
EnableReload4=1
RelativeOutputPath5=Z:\ors-hardware\hardOrs\Project Outputs for Ors\
RelativeOutputPath5=V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\Project Outputs for OrsTypeC\
OpenOutputs5=1
AddToProject5=1
TimestampFolder5=0
......
hardOrsTypeC/OrsTypeC.PrjPcb
View file @ 9f0ef2dc
This diff is collapsed.
hardOrsTypeC/Project Outputs for OrsTypeC/Design Rule Check - OrsTypeC.drc 0 → 100644
View file @ 9f0ef2dc
Protel Design System Design Rule Check
PCB File : V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
Date : 04/05/2023
Time : 11:40:04
Processing Rule : Clearance Constraint (Gap=0.35mm) (InNetClass('HighIsolation')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
Rule Violations :0
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0
Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0
Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0
Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
Rule Violations :0
Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0
Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
Rule Violations :0
Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
Rule Violations :0
Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
Rule Violations :0
Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
Rule Violations :0
Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.6mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
Rule Violations :0
Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.21mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.12mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
Rule Violations :0
Violations Detected : 0
Time Elapsed : 00:02:18
\ No newline at end of file
hardOrsTypeC/Project Outputs for OrsTypeC/Gerber/Gerber Files-macro.APR_LIB
View file @ 9f0ef2dc
This source diff could not be displayed because it is too large. You can view the blob instead.
hardOrsTypeC/Project Outputs for OrsTypeC/Gerber/Gerber Files.EXTREP
View file @ 9f0ef2dc
------------------------------------------------------------------------------------------
Gerber File Extension Report For: Gerber Files.GBR 5/3/2023 5:23:37 PM
Gerber File Extension Report For: Gerber Files.GBR 04/05/2023 11:59:09
------------------------------------------------------------------------------------------
......
hardOrsTypeC/Project Outputs for OrsTypeC/Gerber/Gerber Files.RUL
View file @ 9f0ef2dc
DRC Rules Export File for PCB: Z:\ors-hardware\hardOrsTypeC\OrsTypeC.PcbDoc
DRC Rules Export File for PCB: V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
RuleKind=Clearance|RuleName=HighIsolation|Scope=Board|Minimum=13.78
RuleKind=Clearance|RuleName=PolyGon Clearance_ALL|Scope=Board|Minimum=8.27
RuleKind=Clearance|RuleName=PolyGon Clearance_GND|Scope=Board|Minimum=7.87
......
hardOrsTypeC/Project Outputs for OrsTypeC/NC Drill/NC Drill Files.DRR
View file @ 9f0ef2dc
---------------------------------------------------------------------------
NCDrill File Report For: OrsTypeC.PcbDoc 5/3/2023 5:23:47 PM
NCDrill File Report For: OrsTypeC.PcbDoc 04/05/2023 11:59:23
---------------------------------------------------------------------------
Layer Pair : TOP to BOTTOM
......@@ -8,7 +8,7 @@ ASCII Non-Plated RoundHoles File : NC Drill Files-NonPlated.TXT
Tool Hole Size Hole Type Hole Count Plated Tool Travel
---------------------------------------------------------------------------
T1 0.2mm (7.874mil) Round 2465 4593.09 mm (180.83 Inch)
T1 0.2mm (7.874mil) Round 2464 4600.70 mm (181.13 Inch)
T2 0.25mm (9.842mil) Round 1798 4540.06 mm (178.74 Inch)
T3 0.3mm (11.811mil) Round 224 929.30 mm (36.59 Inch)
T4 0.5mm (19.685mil) Round 34 313.99 mm (12.36 Inch)
......@@ -16,6 +16,6 @@ T5 2.6mm (102.362mil) Round 17 650.39 mm (25
T6 3.25mm (127.953mil) Round 4 35.10 mm (1.38 Inch)
T7 1mm (39.37mil) Round 8 NPTH 301.02 mm (11.85 Inch)
---------------------------------------------------------------------------
Totals 4550 11362.96 mm (447.36 Inch)
Totals 4549 11370.57 mm (447.66 Inch)
Total Processing Time (hh:mm:ss) : 00:00:01
Total Processing Time (hh:mm:ss) : 00:00:02
hardOrsTypeC/Project Outputs for OrsTypeC/NC Drill/NC Drill Files.LDP
View file @ 9f0ef2dc
Layer Pairs Export File for PCB: Z:\ors-hardware\hardOrsTypeC\OrsTypeC.PcbDoc
Layer Pairs Export File for PCB: V:\Work\Projets\RapidSpaceLocal\orsPanHardware\hardOrsTypeC\OrsTypeC.PcbDoc
LayersSetName=Top_Bot_Plated_Thru_Holes|DrillFile=nc drill files-plated.txt|LayerPairs=gtl,gbl
LayersSetName=Top_Bot_NonPlated_Thru_Holes|DrillFile=nc drill files-nonplated.txt|LayerPairs=gtl,gbl
hardOrsTypeC/Project Outputs for OrsTypeC/Pick Place/Pick Place for OrsTypeC(TDDB39).txt
View file @ 9f0ef2dc
......@@ -516,7 +516,7 @@ C37xb C0402 -83.9669mm 39.9892mm -83.9669mm 39.9892
C39xb C0402 -84.6669mm 39.9892mm -84.6669mm 39.9892mm -84.6669mm 39.4892mm T 90.00 CAP_SM100pF
C41xb C0402-Phillips -84.2743mm 41.7329mm -84.2743mm 41.7329mm -84.2743mm 42.2329mm T 270.00 1uF
C42xb C0402-Phillips -80.8743mm 37.4329mm -80.8743mm 37.4329mm -80.8743mm 36.9329mm T 90.00 1uF
C44xb C0402 -86.8398mm 36.119mm -86.8398mm 36.119mm -86.8398mm 35.619mm T 90.00 CAP_SM100pF
C44xb C0402 -86.9373mm 36.2663mm -86.9373mm 36.2663mm -87.2909mm 35.9128mm T 45.00 CAP_SM100pF
C45xb C0402 -86.8169mm 42.8132mm -86.8169mm 42.8132mm -86.8169mm 42.3132mm T 90.00 CAP_SM100pF
L5xb NFM21PC -82.1243mm 40.6329mm -82.1243mm 40.6329mm -83.1243mm 40.6329mm T 360.00 EMIFIL_CAP
L6xb L0603CS(1608) -86.1243mm 40.8829mm -86.1243mm 40.8829mm -85.4743mm 40.8829mm T 360.00 IND_SM-18nH 170m Ohms
......@@ -781,7 +781,7 @@ CU8b C0603 -109.596mm 24.6975mm -109.596mm 24.6975
CU6b C0402 -95.5301mm 21.8028mm -95.5301mm 21.8028mm -95.5301mm 21.3028mm B 90.00 CAP_SM100nF
CU5b C0402 -94.4301mm 20.3028mm -94.4301mm 20.3028mm -94.9301mm 20.3028mm B 360.00 CAP_SM100nF
CU4b C0603 -94.1301mm 22.5028mm -94.1301mm 22.5028mm -94.1301mm 23.2528mm B 270.00 CAP_SM4.7uF
CU2b C0402 -90.3754mm 32.9635mm -90.3754mm 32.9635mm -89.9424mm 33.2135mm T 210.00 CAP_SM100pF
CU2b C0402 -90.1625mm 32.6855mm -90.1625mm 32.6855mm -89.8089mm 33.0391mm T 225.00 CAP_SM100pF
CU1b C0402 -105.321mm 21.9975mm -105.321mm 21.9975mm -105.321mm 22.4975mm B 270.00 CAP_SM100pF
CA22 C0402 -73.6576mm 36.98mm -73.6576mm 36.98mm -74.0112mm 36.6265mm B 45.00 CAP_SM100nF
CA28 C0402 -66.3273mm 37.143mm -66.3273mm 37.143mm -65.9737mm 36.7894mm B 135.00 CAP_SM100nF
......@@ -790,7 +790,7 @@ CA22b2 C0402 -119.1mm 41.3mm -119.1mm 41.3
LC2xb2 NFM21PC -117.8mm 43.2mm -117.8mm 43.2mm -118.8mm 43.2mm B 360.00 EMIFIL_CAP
LC1x NFM21PC -73.3624mm 39.1392mm -73.3624mm 39.1392mm -72.6552mm 38.4321mm B 135.00 EMIFIL_CAP
LC2x NFM21PC -68.5514mm 37.5378mm -68.5514mm 37.5378mm -69.2585mm 36.8306mm B 45.00 EMIFIL_CAP
F3B38b TAXXXX -88.2926mm 34.2126mm -88.7015mm 33.9126mm -87.8836mm 34.0961mm T 210.00 TA1968A
F3B38b TAXXXX -88.4158mm 34.5287mm -88.787mm 34.1575mm -88.0446mm 34.5464mm T 225.00 TA1968A
F1B38 TAXXXX -78.9273mm 73.3367mm -79.0825mm 73.7554mm -78.7375mm 73.4338mm T 105.00 TA1968A
CU4 C0603 -36.9261mm 40.011mm -36.9261mm 40.011mm -37.4564mm 40.5413mm B 315.00 CAP_SM4.7uF
CU5 C0402 -35.5826mm 38.2432mm -35.5826mm 38.2432mm -35.9361mm 37.8896mm B 45.00 CAP_SM100nF
......
hardOrsTypeC/Project Outputs for OrsTypeC/Pick Place/Pick Place for OrsTypeC(TDDB40).txt
View file @ 9f0ef2dc
......@@ -516,7 +516,7 @@ C37xb C0402 -83.9669mm 39.9892mm -83.9669mm 39.9892
C39xb C0402 -84.6669mm 39.9892mm -84.6669mm 39.9892mm -84.6669mm 39.4892mm T 90.00 CAP_SM100pF
C41xb C0402-Phillips -84.2743mm 41.7329mm -84.2743mm 41.7329mm -84.2743mm 42.2329mm T 270.00 1uF
C42xb C0402-Phillips -80.8743mm 37.4329mm -80.8743mm 37.4329mm -80.8743mm 36.9329mm T 90.00 1uF
C44xb C0402 -86.8398mm 36.119mm -86.8398mm 36.119mm -86.8398mm 35.619mm T 90.00 CAP_SM100pF
C44xb C0402 -86.9373mm 36.2663mm -86.9373mm 36.2663mm -87.2909mm 35.9128mm T 45.00 CAP_SM100pF
C45xb C0402 -86.8169mm 42.8132mm -86.8169mm 42.8132mm -86.8169mm 42.3132mm T 90.00 CAP_SM100pF
L5xb NFM21PC -82.1243mm 40.6329mm -82.1243mm 40.6329mm -83.1243mm 40.6329mm T 360.00 EMIFIL_CAP
L6xb L0603CS(1608) -86.1243mm 40.8829mm -86.1243mm 40.8829mm -85.4743mm 40.8829mm T 360.00 IND_SM-18nH 170m Ohms
......@@ -781,7 +781,7 @@ CU8b C0603 -109.596mm 24.6975mm -109.596mm 24.6975
CU6b C0402 -95.5301mm 21.8028mm -95.5301mm 21.8028mm -95.5301mm 21.3028mm B 90.00 CAP_SM100nF
CU5b C0402 -94.4301mm 20.3028mm -94.4301mm 20.3028mm -94.9301mm 20.3028mm B 360.00 CAP_SM100nF
CU4b C0603 -94.1301mm 22.5028mm -94.1301mm 22.5028mm -94.1301mm 23.2528mm B 270.00 CAP_SM4.7uF
CU2b C0402 -90.3754mm 32.9635mm -90.3754mm 32.9635mm -89.9424mm 33.2135mm T 210.00 CAP_SM100pF
CU2b C0402 -90.1625mm 32.6855mm -90.1625mm 32.6855mm -89.8089mm 33.0391mm T 225.00 CAP_SM100pF
CU1b C0402 -105.321mm 21.9975mm -105.321mm 21.9975mm -105.321mm 22.4975mm B 270.00 CAP_SM100pF
CA22 C0402 -73.6576mm 36.98mm -73.6576mm 36.98mm -74.0112mm 36.6265mm B 45.00 CAP_SM100nF
CA28 C0402 -66.3273mm 37.143mm -66.3273mm 37.143mm -65.9737mm 36.7894mm B 135.00 CAP_SM100nF
......@@ -790,7 +790,7 @@ CA22b2 C0402 -119.1mm 41.3mm -119.1mm 41.3
LC2xb2 NFM21PC -117.8mm 43.2mm -117.8mm 43.2mm -118.8mm 43.2mm B 360.00 EMIFIL_CAP
LC1x NFM21PC -73.3624mm 39.1392mm -73.3624mm 39.1392mm -72.6552mm 38.4321mm B 135.00 EMIFIL_CAP
LC2x NFM21PC -68.5514mm 37.5378mm -68.5514mm 37.5378mm -69.2585mm 36.8306mm B 45.00 EMIFIL_CAP
F3B38b TAXXXX -88.2926mm 34.2126mm -88.7015mm 33.9126mm -87.8836mm 34.0961mm T 210.00 TA1968A
F3B38b TAXXXX -88.4158mm 34.5287mm -88.787mm 34.1575mm -88.0446mm 34.5464mm T 225.00 TA1968A
F1B38 TAXXXX -78.9273mm 73.3367mm -79.0825mm 73.7554mm -78.7375mm 73.4338mm T 105.00 TA1968A
CU4 C0603 -36.9261mm 40.011mm -36.9261mm 40.011mm -37.4564mm 40.5413mm B 315.00 CAP_SM4.7uF
CU5 C0402 -35.5826mm 38.2432mm -35.5826mm 38.2432mm -35.9361mm 37.8896mm B 45.00 CAP_SM100nF
......@@ -814,8 +814,8 @@ LF1b2 L_TDK_0402 -101.7041mm 73.6657mm -101.7041mm 73.6657
LF1 L_TDK_0402 -79.321mm 74.742mm -79.321mm 74.742mm -79.0028mm 75.0602mm T 225.00 IND_SM-
LF2b2 L_TDK_0402 -99.9527mm 71.5361mm -99.9527mm 71.5361mm -100.2708mm 71.2178mm T 45.00 IND_SM-
LF2 L_TDK_0402 -77.6711mm 72.744mm -77.6711mm 72.744mm -77.353mm 73.0622mm T 225.00 IND_SM-
LF3b L_TDK_0402 -89.6211mm 33.9086mm -89.6211mm 33.9086mm -89.8461mm 34.2983mm T 300.00 IND_SM-
LF3b L_TDK_0402 -89.6476mm 33.845mm -89.6476mm 33.845mm -89.9658mm 34.1632mm T 315.00 IND_SM-
LF3 L_TDK_0402 -41.7927mm 51.3214mm -41.7927mm 51.3214mm -42.2273mm 51.4379mm T 345.00 IND_SM-
LF4b L_TDK_0402 -87.6847mm 35.4085mm -87.6847mm 35.4085mm -87.9097mm 35.7983mm T 300.00 IND_SM-
LF4b L_TDK_0402 -87.4685mm 35.145mm -87.4685mm 35.145mm -87.1503mm 34.8268mm T 135.00 IND_SM-
LF4 L_TDK_0402 -41.4898mm 53.7268mm -41.4898mm 53.7268mm -41.9245mm 53.8433mm T 345.00 IND_SM-
hardOrsTypeC/Project Outputs for OrsTypeC/Pick Place/Pick Place for OrsTypeC(TDDB41).txt
View file @ 9f0ef2dc
......@@ -514,7 +514,7 @@ C37xb C0402 -83.9669mm 39.9892mm -83.9669mm 39.9892
C39xb C0402 -84.6669mm 39.9892mm -84.6669mm 39.9892mm -84.6669mm 39.4892mm T 90.00 CAP_SM100pF
C41xb C0402-Phillips -84.2743mm 41.7329mm -84.2743mm 41.7329mm -84.2743mm 42.2329mm T 270.00 1uF
C42xb C0402-Phillips -80.8743mm 37.4329mm -80.8743mm 37.4329mm -80.8743mm 36.9329mm T 90.00 1uF
C44xb C0402 -86.8398mm 36.119mm -86.8398mm 36.119mm -86.8398mm 35.619mm T 90.00 CAP_SM100pF
C44xb C0402 -86.9373mm 36.2663mm -86.9373mm 36.2663mm -87.2909mm 35.9128mm T 45.00 CAP_SM100pF
C45xb C0402 -86.8169mm 42.8132mm -86.8169mm 42.8132mm -86.8169mm 42.3132mm T 90.00 CAP_SM100pF
L5xb NFM21PC -82.1243mm 40.6329mm -82.1243mm 40.6329mm -83.1243mm 40.6329mm T 360.00 EMIFIL_CAP
L6xb L0603CS(1608) -86.1243mm 40.8829mm -86.1243mm 40.8829mm -85.4743mm 40.8829mm T 360.00 IND_SM-18nH 170m Ohms
......@@ -779,7 +779,7 @@ CU8b C0603 -109.596mm 24.6975mm -109.596mm 24.6975
CU6b C0402 -95.5301mm 21.8028mm -95.5301mm 21.8028mm -95.5301mm 21.3028mm B 90.00 CAP_SM100nF
CU5b C0402 -94.4301mm 20.3028mm -94.4301mm 20.3028mm -94.9301mm 20.3028mm B 360.00 CAP_SM100nF
CU4b C0603 -94.1301mm 22.5028mm -94.1301mm 22.5028mm -94.1301mm 23.2528mm B 270.00 CAP_SM4.7uF
CU2b C0402 -90.3754mm 32.9635mm -90.3754mm 32.9635mm -89.9424mm 33.2135mm T 210.00 CAP_SM100pF
CU2b C0402 -90.1625mm 32.6855mm -90.1625mm 32.6855mm -89.8089mm 33.0391mm T 225.00 CAP_SM100pF
CU1b C0402 -105.321mm 21.9975mm -105.321mm 21.9975mm -105.321mm 22.4975mm B 270.00 CAP_SM100pF
CA22 C0402 -73.6576mm 36.98mm -73.6576mm 36.98mm -74.0112mm 36.6265mm B 45.00 CAP_SM100nF
CA28 C0402 -66.3273mm 37.143mm -66.3273mm 37.143mm -65.9737mm 36.7894mm B 135.00 CAP_SM100nF
......@@ -806,7 +806,7 @@ R140 R0402-Phillips -60.7mm 137.95mm -60.7mm 137.95
Q3 SC70-3LD -12.5mm 53.7mm -12.5mm 53.7mm -13.45mm 53.05mm B 360.00 VDS= 20V ID= 100mA RDSON= 4 Ohm@VGS=4V
R4 R0402 -54.4mm 109.4mm -54.4mm 109.4mm -54.9mm 109.4mm B 360.00 RES_SM-1k
R6 R0402 -14.2mm 51.7mm -14.2mm 51.7mm -13.7mm 51.7mm B 180.00 RES_SM-100k
F5B41b TA2326C -88.2846mm 34.2174mm -88.3571mm 34.1131mm -87.7033mm 34.1568mm T 30.00 Filter Band 41
F5B41b TA2326C -88.4039mm 34.5426mm -88.5063mm 34.4402mm -87.8861mm 34.6517mm T 45.00 Filter Band 41
F5B41 TA2326C -41.0149mm 52.3937mm -41.0434mm 52.3561mm -40.612mm 52.8492mm T 75.00 Filter Band 41
F7B41b2 TA2326C -100.5938mm 72.7811mm -100.6223mm 72.8188mm -100.7493mm 72.176mm T 285.00 Filter Band 41
F7B41 TA2326C -78.9502mm 73.3303mm -78.9787mm 73.3679mm -79.1057mm 72.7252mm T 285.00 Filter Band 41
......@@ -814,8 +814,8 @@ LF1b2 L_TDK_0402 -101.7041mm 73.6657mm -101.7041mm 73.6657
LF1 L_TDK_0402 -79.321mm 74.742mm -79.321mm 74.742mm -79.0028mm 75.0602mm T 225.00 IND_SM-
LF2b2 L_TDK_0402 -99.9527mm 71.5361mm -99.9527mm 71.5361mm -100.2708mm 71.2178mm T 45.00 IND_SM-
LF2 L_TDK_0402 -77.6711mm 72.744mm -77.6711mm 72.744mm -77.353mm 73.0622mm T 225.00 IND_SM-
LF3b L_TDK_0402 -89.6211mm 33.9086mm -89.6211mm 33.9086mm -89.8461mm 34.2983mm T 300.00 IND_SM-
LF3b L_TDK_0402 -89.6476mm 33.845mm -89.6476mm 33.845mm -89.9658mm 34.1632mm T 315.00 IND_SM-
LF3 L_TDK_0402 -41.7927mm 51.3214mm -41.7927mm 51.3214mm -42.2273mm 51.4379mm T 345.00 IND_SM-
LF4b L_TDK_0402 -87.6847mm 35.4085mm -87.6847mm 35.4085mm -87.9097mm 35.7983mm T 300.00 IND_SM-
LF4b L_TDK_0402 -87.4685mm 35.145mm -87.4685mm 35.145mm -87.1503mm 34.8268mm T 135.00 IND_SM-
LF4 L_TDK_0402 -41.4898mm 53.7268mm -41.4898mm 53.7268mm -41.9245mm 53.8433mm T 345.00 IND_SM-
hardOrsTypeC/Project Outputs for OrsTypeC/Status Report.Txt 0 → 100644
View file @ 9f0ef2dc
Output: NC Drill Files
Type : NC Drill
From : PCB Document [OrsTypeC.PcbDoc]
Generated File[NC Drill Files-Plated.TXT]
Generated File[NC Drill Files-NonPlated.TXT]
Generated File[NC Drill Files.LDP]
Generated File[NC Drill Files.DRR]
Files Generated : 4
Documents Printed : 0
Finished Output Generation At 11:59:25 On 04/05/2023
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7