• Kirill Smelkov's avatar
    software/ors-amarisoft: Merge gnb.jinja2.cfg into enb.jinja2.cfg · f365a440
    Kirill Smelkov authored
    In MultiRU there will be only one ENB which supports all TDD, FDD, LTE and NR
    cells and different types of radio units - all at the same time. This patch is
    preparatory step for that: it merges gnb configuration template into enb
    configuration template, so that enb.jinja2.cfg now serves both enb and gnb
    instances.
    
    In this patch for now we only move code from gnb.jinja2.cfg without changing
    it(*) and wrap parts with `if do_lte` and `if do_nr` correspondingly.
    
    The end result of rendered enb.cfg and gnb.cfg stays the same modulo space
    changes and added innoccent `#define TDD` as Appendix shows.
    
    (*) the only exception is set up of gtp_addr which has practically the same
    code, was wrapped with `if mme_list` in enb and `if amf_list` in gnb, and is now
    wrapped with `if mme_list or amf_list`.
    
    /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
    /reviewed-by @jhuge
    /reviewed-on !1512
    
    --------
    
    Appendix. Diff for rendered enb.cfg and gnb.cfg before and after this patch.
    
    ```
    $ ./pythonwitheggs slapos-render-config.py && (git diff -w --no-index config/enb.cfg.old config/enb.cfg ; git diff -w --no-index config/gnb.cfg.old config/gnb.cfg)
    ```
    
    ```diff
    diff --git a/config/enb.cfg.old b/config/enb.cfg
    index fdf3ab24d..cb46697ea 100644
    --- a/config/enb.cfg.old
    +++ b/config/enb.cfg
    @@ -1,11 +1,15 @@
    
    +
     #define TDD                 1
    
     #define N_RB_DL             50
    +
     #define N_ANTENNA_DL        2
    +
     #define N_ANTENNA_UL        2
    
    +
     {
    
       log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rota>
    @@ -24,7 +28,6 @@
       rx_gain: 43,
    
       com_addr: "127.0.1.2:9001",
    -
       mme_list: [
    
         {
    @@ -33,9 +36,9 @@
    
       ],
    
    +
       gtp_addr: "127.0.1.1",
    
    -
       enb_id: 0x1A2D0,
    
       cell_list: [{
    @@ -49,7 +52,6 @@
           ],
         }
       ],
    -
       cell_default: {
         plmn_list: [
           "00101",
    @@ -226,4 +228,6 @@
       meas_gap_config: "gp0",
       ho_from_meas: true,
       },
    +
    +
     }
    \ No newline at end of file
    diff --git a/config/gnb.cfg.old b/config/gnb.cfg
    index e3d671e09..4e47a2094 100644
    --- a/config/gnb.cfg.old
    +++ b/config/gnb.cfg
    @@ -1,15 +1,21 @@
    
    +
    +#define TDD                 1
    +
    +
     #define N_ANTENNA_DL        2
    
     #define N_ANTENNA_UL        2
    
    +
     {
    
       log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rota>
    
       log_filename: "log/gnb.log",
    
    +
       rf_driver: {
           name: "sdr",
           args: "dev0=/dev/sdr0",
    @@ -30,15 +36,17 @@
       ],
    
    -
    -
       gtp_addr: "127.0.1.1",
    
       gnb_id_bits: 28,
       gnb_id: 0x12345,
       en_dc_support: true,
    -  cell_list: [],
    +
    +  cell_list: [
    +  ],
    +
    +
       nr_cell_list: [
       {
         rf_port: 0,
    ```
    f365a440
instance-gnb.jinja2.cfg 10.8 KB