- 17 Oct, 2023 2 commits
-
-
Joanne Hugé authored
- 16 Oct, 2023 16 commits
-
-
Lu Xu authored
-
Lu Xu authored
-
Lu Xu authored
-
Jérome Perrin authored
This is required because it depends on an older version of Jinja and updating in 565f4986 (stack/slapos: version up Flask and friends (itsdangerous, Jinja2, MarkupSafe, Werkzeug), 2023-10-12) broke jupyter software At the same time, move some pins from stack/erp5 to stack/slapos as they become used by more softwares
-
Jérome Perrin authored
previous patch - 24f5a96c (software/slapos-sr-testing: disallow usage of system python3, 2023-10-02) - was incorrect, an `entry-point` is required for a script to be generated.
-
Jérome Perrin authored
-
Jérome Perrin authored
We can not rely on system python here, it's a bit better to rely on buildout's python ( the main reason is that it complies with slapos-sr-testing not having system python ). The implementation is a bit complicated, we can not just reference ${buildout:executable} in the profile, because doing so will cause an infinite loop with rebootstrap and software installation never finish because options of ca-certificates change at every run if they include the python path. Instead, we use a pre-make-hook to rewrite the Makefile without saving the interpreter in option. This python is only used during the build process (to generate the certificate files) and not used at run time, so it does not really depend on python strictly speaking. Anyway, because it's a component used very early in the bootstrap, we can not reference python here.
-
Jérome Perrin authored
This software autodetects python2 and python3, so provide both
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Jérome Perrin authored
this component needs both python2 and python3
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Jérome Perrin authored
After updating curl, php 7 fail to build. This updates to php 8 and as a consequence updates lamp softwares to their latest versions See merge request nexedi/slapos!1449
-
Julien Muchembled authored
See merge request nexedi/slapos!1122
-
- 13 Oct, 2023 11 commits
-
-
Lu Xu authored
-
Jérome Perrin authored
replace deprecated rainloop by the recommended replacement snappymail fix promise race with check-nc-install, CAN_INSTALL is removed before slapos specific configuration is finished. Create a file at the end and check its presence as well.
-
Jérome Perrin authored
-
Jérome Perrin authored
now that slapos uses php 8
-
Jérome Perrin authored
-
Jérome Perrin authored
not used and seems not working (using php5)
-
Jérome Perrin authored
stdout/stderr is sent to supervisor and we don't want buffering the output in that case, because it introduces a delay in the output and break the usage of `slapos node supervisorctl fg` to re-attach the process and use pdb
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Jérome Perrin authored
-
Jérome Perrin authored
This test fail since 450a6999 (slapos-master: Add missing RevocationCheck on apache, 2023-06-01) and we are reimplementing all this differently. Mark the test as expected failure for now, so that it does not impact the general state of test suite.
-
- 12 Oct, 2023 9 commits
-
-
Thomas Gambier authored
-
Yusei Tahara authored
-
Kirill Smelkov authored
ORS software-release emits many *.json.log files with information about current state of eNB and radio units. Those files are used by code in slapos.toolbox to implement corresponding promises. The files, it seems, try to match JSON Lines format(*) with every line containing a JSON object describing timestamp, log level and log payload of corresponding log entry. So far all is good. One peculiarity, however, is that, contrary to everything else, the content of the `data` field in the logs is not emitted via JSON-encoding. Initially, starting from 4968d55c (ors-amarisoft: get eNB stats and add promises), that `data` payload was being emitted via %s py formatting, which is similar to what JSON-encoding would produce, but is not it exactly. For example if log payload is {'abc': 123} then %s and JSON would quote `abc` differently: {'abc': 123} # %s {"abc": 123} # JSON That would not be a big deal if what %s produces would be still valid JSON accepted by JSON-decoder, but unfortunately it is not so: JSONDecodeError is raised when {'abc': 123} is tried to be decoded. The code in slapos.toolbox, so far, is handling this situation by feeding to JSON-decoder original input with ' characters replaced by " json.loads(line.decode().replace("'", '"')) (+) which more or less works in basic cases, but breaks when log payload contains ' character itself. For example for {"a'bc": 123} replacing gives {"a"bc": 123}, which, being invalid JSON, raises JSONDecodeError: Expecting ':' delimiter: line 1 column 5 (char 4) when fed to json.loads() . I've actually hit this problem for real with amarisoft-rf-info.json.log where the data part contains output of `rf_info` looking e.g. as TX underflows=0 RX overflows=0 TRX SDR driver 2023-09-07, API v15/18 PCIe CPRI /dev/sdr0@0: Hardware ID: 0x4b12 DNA: [0x0048248a334a7054] Serial: '' FPGA revision: 2023-06-23 10:05:24 FPGA vccint: 0.98 V FPGA vccaux: 1.76 V FPGA vccbram: 0.98 V FPGA temperature: 71.9 °C Clock tune: 0.0 ppm NUMA: 0 CPRI_option: '5' (x8) lock=no DMA0: TX fifo: 66.67us Usage=16/32768 (0%) DMA0: RX fifo: 66.67us Usage=16/32768 (0%) DMA0 Underflows: 0 DMA0 Overflows: 0 PCIe CPRI /dev/sdr0@1: Hardware ID: 0x4b12 DNA: [0x0048248a334a7054] Serial: '' FPGA revision: 2023-06-23 10:05:24 FPGA vccint: 0.98 V FPGA vccaux: 1.77 V FPGA vccbram: 0.98 V FPGA temperature: 71.7 °C Clock tune: 0.0 ppm NUMA: 0 CPRI_option: '5' (x8) lock=HW+SW rx/tx=46.606us Port #0: T14=46.606us DMA0: TX fifo: 66.67us Usage=16/32768 (0%) DMA0: RX fifo: 66.67us Usage=16/32768 (0%) DMA0 Underflows: 0 DMA0 Overflows: 0 which lead to breakage when trying to load that log due to ' symbols. The fix is simple: change the code, that emits *.json.log to emit data payload via json.dumps instead of %s. We can do that without breaking anything because, contrary to enb.xlog, those *.json.log are not uploaded to any separate system and currently are only used to implement promises without preserving log files in any storage for any non-small amount of time. In other words, currently those *.json.log are temporary files whose format can be adjusted without strongly caring about backward compatibility. b32b4a8e (software/ors-amarisoft: general improvement for RU (logs/promises/input parameters)) already changed %s to json.dumps for amarisoft-stats.json.log , but left all other logs at %s. -> Fix this for everything by replacing %s to json.dumps in all generated logs. -> Corresponding slapos.toolbox adjustments are in slapos.toolbox!120. /reviewed-on !1447 /reviewed-by @jhuge, @jerome, @tomo /cc @lu.xu, @xavier_thompson, @Daetalus (*) https://jsonlines.org/ (+) see e.g. https://lab.nexedi.com/nexedi/slapos.toolbox/blob/453dce5f/slapos/promise/plugin/util.py#L50
-
Titouan Soulard authored
-
Titouan Soulard authored
-
Titouan Soulard authored
-
Jérome Perrin authored
-
Jérome Perrin authored
after 6e8b97ee (Publish IPv6 URL to SlapOs master., 2023-10-02) the parameters are different
-
Jérome Perrin authored
after recent updates, probably 3c514224 (component/freetype: version up 2.13.2, including security fixes., 2023-10-10), the rendering is different.
-
- 11 Oct, 2023 2 commits
-
-
Kazuhiko Shiozaki authored
-
Kazuhiko Shiozaki authored
-