Update Release Candidate

component/alsa/buildout.cfg

@@ -6,12 +6,12 @@ parts =
 # Contains libasound
 recipe = slapos.recipe.cmmi
 shared = true
-url = ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.1.3.tar.bz2
-md5sum = eefe5992567ba00d6110a540657aaf5c
+url = https://www.alsa-project.org/files/pub/lib/alsa-lib-1.2.10.tar.bz2
+md5sum = aced5acdb6161ed86e5ca3bb10618ca1
 configure-options =
   --disable-static
   --disable-aload
-  --disable-rawmidi
+  --enable-rawmidi
   --disable-ucm
   --disable-alisp
   --disable-old-symbols

component/ca-certificates/buildout.cfg

@@ -21,7 +21,7 @@ patches =
   ${:_profile_base_location_}/ca-certificates-no-cryptography.patch#14ad1308623b0d15420906ae3d9b4867
 patch-options = -p0
 configure-command = true
-make-targets = install DESTDIR=@@LOCATION@@ CERTSDIR=certs SBINDIR=sbin
+make-targets = install DESTDIR=@@LOCATION@@ CERTSDIR=certs SBINDIR=/sbin
 environment =
   PATH=${xz-utils:location}/bin:%(PATH)s
 pre-make-hook =

component/firefox/buildout.cfg

@@ -32,6 +32,7 @@ part = firefox
 recipe = slapos.recipe.build
 location = ${buildout:bin-directory}/${:part}
 fonts-conf = ${firefox-default-fonts-conf:output}
+gsettings-schema-dir = ${gtk-3:location}/share/glib-2.0/schemas/
 init =
   self.buildout[options['part']]
 install =
@@ -45,15 +46,21 @@ install =
   # BBB use a default fonts.conf for compatibility, but it's software instance
   # responsability to build a fonts.conf with the fonts they want.
   [ "$FONTCONFIG_FILE" ] || export FONTCONFIG_FILE=%s
+  [ "$GSETTINGS_SCHEMA_DIR" ] || export GSETTINGS_SCHEMA_DIR=%s
   exec $d/firefox "$@"
   """ % (
     part['location'],
     ':'.join(part['library'].split()),
     ':'.join(part['path'].split()),
     options['fonts-conf'],
+    options['gsettings-schema-dir'],
   ))
     os.fchmod(f.fileno(), 0o755)
 
+[firefox-wrapper-115]
+<= firefox-wrapper
+part = firefox-115
+
 [firefox-wrapper-78]
 <= firefox-wrapper
 part = firefox-78
@@ -66,10 +73,6 @@ part = firefox-68
 <= firefox-wrapper
 part = firefox-60
 
-[firefox-wrapper-52]
-<= firefox-wrapper
-part = firefox-52
-
 [firefox-default-fonts-conf]
 recipe = slapos.recipe.template:jinja2
 url = ${template-fonts-conf:output}
@@ -92,7 +95,13 @@ cache-dir =
 # installed in ${buildout:bin-directory}.
 # Installing ${firefox:} is not enough, because wrapper setting $LD_LIBRARY_PATH
 # would not be created.
-<= firefox-68
+<= firefox-115
+
+[firefox-115]
+<= firefox-download
+version = 115.3.1esr
+i686-md5sum = f0df1b5cce1edd65addc823da02f9488
+x86_64-md5sum = 910c0786459cf1e4dc214e6402d0633e
 
 [firefox-78]
 <= firefox-download
@@ -112,12 +121,6 @@ version = 60.0.2esr
 i686-md5sum = ce7c80716036dfb5c2fb1ca2538556ff
 x86_64-md5sum = 6fe25d9a3fcc82670320242c9047d1da
 
-[firefox-52]
-<= firefox-download
-version = 52.9.0esr
-i686-md5sum = 9aa18888b7812670208490609d75c9bc
-x86_64-md5sum = 9336d70f45070c743d08e5473b783a7a
-
 [firefox-download]
 recipe = slapos.recipe.build
 slapos_promise =
@@ -157,8 +160,10 @@ library =
   ${libXext:location}/lib
   ${libXi:location}/lib
   ${libxml2:location}/lib
+  ${libXrandr:location}/lib
   ${libXrender:location}/lib
   ${libXt:location}/lib
+  ${libXtst:location}/lib
   ${mesa:location}/lib
   ${pango:location}/lib
   ${pcre:location}/lib
@@ -186,7 +191,13 @@ md5sum = ${:x86_64-md5sum}
 
 [geckodriver]
 # Current geckodriver installed as ${buildout:bin-directory}/geckodriver
-<= geckodriver-0.24.0
+<= geckodriver-0.33.0
+
+[geckodriver-0.33.0]
+<= geckodriver-base
+version = 0.33.0
+i686-md5sum = c4a9e6c92dc493f25c8d390f1c6fb11c
+x86_64-md5sum = 563c82cfbb21478450e1c828e3730b10
 
 [geckodriver-0.24.0]
 <= geckodriver-base
@@ -200,12 +211,6 @@ version = 0.22.0
 i686-md5sum = 6de7544753fda56fbaa8382dcac99aaa
 x86_64-md5sum = 81746200ce5841e00cabf3b8ea7db542
 
-[geckodriver-0.16.1]
-<= geckodriver-base
-version = 0.16.1
-i686-md5sum = not not on github
-x86_64-md5sum = 57dfd55d4759d9878eb75b4c0123d00c
-
 [geckodriver-base]
 # Installs geckodriver ${version}
 recipe = slapos.recipe.build

component/libedit/buildout.cfg

+[buildout]
+extends =
+  ../ncurses/buildout.cfg
+
+parts =
+  libedit
+
+[libedit]
+recipe = slapos.recipe.cmmi
+shared = true
+url = https://thrysoee.dk/editline/libedit-20230828-3.1.tar.gz
+md5sum = 16bb2ab0d33bce3467f5cd4ec7d8f3ee
+environment =
+  CPPFLAGS=-I${ncurses:location}/include
+  LDFLAGS=-L${ncurses:location}/lib -Wl,-rpath=${ncurses:location}/lib
+

component/mariadb/buildout.cfg

@@ -9,6 +9,7 @@ extends =
   ../groonga/buildout.cfg
   ../jemalloc/buildout.cfg
   ../libaio/buildout.cfg
+  ../libedit/buildout.cfg
   ../libxml2/buildout.cfg
   ../lz4/buildout.cfg
   ../ncurses/buildout.cfg
@@ -16,7 +17,6 @@ extends =
   ../patch/buildout.cfg
   ../pcre/buildout.cfg
   ../pkgconfig/buildout.cfg
-  ../readline/buildout.cfg
   ../snappy/buildout.cfg
   ../xz-utils/buildout.cfg
   ../zlib/buildout.cfg
@@ -73,11 +73,11 @@ configure-options =
 #  https://lore.kernel.org/linux-btrfs/ed3642c2-682e-08a1-f18d-2d63409b7631@nexedi.com/T/
   -DWITH_FALLOCATE=NO
 ##
-CMAKE_CFLAGS = -I${bzip2:location}/include -I${jemalloc:location}/include -I${libaio:location}/include -I${libxml2:location}/include -I${ncurses:location}/include -I${openssl:location}/include -I${pcre:location}/include -I${readline5:location}/include -I${xz-utils:location}/include -I${zlib:location}/include -I${unixodbc:location}/include -I${lz4:location}/include -I${snappy:location}/include -I${zstd:location}/include
-CMAKE_LIBRARY_PATH = ${bzip2:location}/lib:${jemalloc:location}/lib:${libaio:location}/lib:${libxml2:location}/lib:${ncurses:location}/lib:${openssl:location}/lib:${pcre:location}/lib:${readline5:location}/lib:${xz-utils:location}/lib:${zlib:location}/lib:${unixodbc:location}/lib:${lz4:location}/lib:${snappy:location}/lib:${zstd:location}/lib
+CMAKE_CFLAGS = -I${bzip2:location}/include -I${jemalloc:location}/include -I${libaio:location}/include -I${libxml2:location}/include -I${ncurses:location}/include -I${openssl:location}/include -I${pcre:location}/include -I${libedit:location}/include -I${xz-utils:location}/include -I${zlib:location}/include -I${unixodbc:location}/include -I${lz4:location}/include -I${snappy:location}/include -I${zstd:location}/include
+CMAKE_LIBRARY_PATH = ${bzip2:location}/lib:${jemalloc:location}/lib:${libaio:location}/lib:${libxml2:location}/lib:${ncurses:location}/lib:${openssl:location}/lib:${pcre:location}/lib:${libedit:location}/lib:${xz-utils:location}/lib:${zlib:location}/lib:${unixodbc:location}/lib:${lz4:location}/lib:${snappy:location}/lib:${zstd:location}/lib
 environment =
   CMAKE_PROGRAM_PATH=${cmake:location}/bin
-  CMAKE_INCLUDE_PATH=${bzip2:location}/include:${libaio:location}/include:${libaio:location}/include:${libxml2:location}/include:${ncurses:location}/include:${openssl:location}/include:${pcre:location}/include:${readline5:location}/include:${xz-utils:location}/include:${zlib:location}/include:${unixodbc:location}/include:${lz4:location}/include:${snappy:location}/include:${zstd:location}/include
+  CMAKE_INCLUDE_PATH=${bzip2:location}/include:${libaio:location}/include:${libaio:location}/include:${libxml2:location}/include:${ncurses:location}/include:${openssl:location}/include:${pcre:location}/include:${libedit:location}/include:${xz-utils:location}/include:${zlib:location}/include:${unixodbc:location}/include:${lz4:location}/include:${snappy:location}/include:${zstd:location}/include
   CMAKE_LIBRARY_PATH=${:CMAKE_LIBRARY_PATH}
   LDFLAGS=-L${bzip2:location}/lib -L${jemalloc:location}/lib -L${libaio:location}/lib -L${pcre:location}/lib -L${xz-utils:location}/lib -L${zlib:location}/lib -L${unixodbc:location}/lib -L${lz4:location}/lib -L${snappy:location}/lib -L${zstd:location}/lib
   PATH=${patch:location}/bin:%(PATH)s

component/python-2.7/buildout.cfg

@@ -9,6 +9,7 @@ extends =
   ../openssl/buildout.cfg
   ../patch/buildout.cfg
   ../readline/buildout.cfg
+  ../sed/buildout.cfg
   ../sqlite3/buildout.cfg
   ../zlib/buildout.cfg
   ../file/buildout.cfg
@@ -49,6 +50,8 @@ patches = ${python2.7-lib-patches:patches}
   ${:_profile_base_location_}/pytracemalloc_pep445.patch#9f3145817afa2b7fad801fde8447e396
 url =
   http://www.python.org/ftp/python/${:package_version}/Python-${:package_version}${:package_version_suffix}.tar.xz
+pre-configure =
+  ${sed:location}/bin/sed -i -e "s/if 'curses' in ln:/if 'curses' in ln.split(os.sep)[-1]:/" setup.py
 configure-options =
   --enable-ipv6
   --enable-unicode=ucs4

component/python3/buildout.cfg

@@ -10,6 +10,7 @@ extends =
   ../ncurses/buildout.cfg
   ../openssl/buildout.cfg
   ../readline/buildout.cfg
+  ../sed/buildout.cfg
   ../sqlite3/buildout.cfg
   ../util-linux/buildout.cfg
   ../xz-utils/buildout.cfg
@@ -30,6 +31,8 @@ executable = @@LOCATION@@/bin/${:_buildout_section_name_}
 
 url =
   https://www.python.org/ftp/python/${:package_version}/Python-${:package_version}${:package_version_suffix}.tar.xz
+pre-configure =
+  ${sed:location}/bin/sed -i -e "s/if 'curses' in ln:/if 'curses' in ln.split(os.sep)[-1]:/" setup.py
 configure-options =
   --enable-ipv6
   --without-ensurepip

component/readline/buildout.cfg

@@ -5,36 +5,8 @@ extends =
   ../patch/buildout.cfg
 
 parts =
-  readline5
   readline
 
-# readline-5.x is still used for GPL2 only softwares.
-[readline5]
-recipe = slapos.recipe.cmmi
-shared = true
-url = http://ftp.gnu.org/gnu/readline/readline-5.2.tar.gz
-patches =
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-001#9d4d41622aa9b230c57f68548ce87d8f
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-002#f03e512d14206e37f7d6a748b56b9476
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-003#252b42d8750f1a94b6bdf086612dceb2
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-004#a32333c2e603a3ed250514e91050e552
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-005#8106796c09b789523a3a78ab69c04b6d
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-006#512188e2bf0837f7eca19dbf71f182ae
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-007#ac17aca62eb6fb398c9f2fe9de540aff
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-008#2484c392db021905f112cf97a94dfd4c
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-009#fc6eb35d07914fae5c57d49c12483ff7
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-010#7a2bf3dc7ac7680b1461a5701100e91b
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-011#ef6cef6822663470f6ac8c517c5a7ec6
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-012#e3e9f441c8111589855bc363e5640f6c
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-013#3e2e5f543ed268a68fd1fa839faade1a
-  http://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-014#a1be30e1c6f1099bb5fcef00a2631fb8
-md5sum = e39331f32ad14009b9ff49cc10c5e751
-pre-configure = cp -f ${gnu-config:location}/config.sub ${gnu-config:location}/config.guess support
-configure-options =
-  --enable-multibyte
-  --disable-static
-patch-binary = ${patch:location}/bin/patch
-
 [readline]
 recipe = slapos.recipe.cmmi
 shared = true

software/gitlab/software.cfg

@@ -135,7 +135,7 @@ git-executable = ${git:location}/bin/git
 <= git-repository
 repository = https://lab.nexedi.com/nexedi/gitlab-ce.git
 # 9.5.10 + NXD patches:
-revision = v8.16.0.pre-16286-g9d66cd7b834
+revision = v9.5.10-12-g74c9f9fe7f9
 location = ${buildout:parts-directory}/gitlab
 
 [gitlab-shell-repository]

software/neoppod/software.cfg.json

+{
+  "name": "NEO",
+  "description": "Distributed, redundant and transactional storage for ZODB",
+  "serialisation": "json-in-xml",
+  "software-type": {
+    "default": {
+      "title": "Default",
+      "software-type": "default",
+      "request": "instance-neo-input-schema.json",
+      "response": "instance-neo-output-schema.json",
+      "index": 0
+    }
+  }
+}

software/ors-amarisoft/buildout.hash.cfg

@@ -16,7 +16,7 @@
 
 [template]
 filename = instance.cfg
-md5sum = f23909a703ac9001afec38cbac19591a
+md5sum = 1e3d2626ffd677ab6d3c078a376c1c7c
 
 [amarisoft-stats.jinja2.py]
 _update_hash_filename_ = amarisoft-stats.jinja2.py
@@ -26,41 +26,57 @@ md5sum = c4d5e9fcf460d88bc2b4bcfbdfe554f7
 _update_hash_filename_ = amarisoft-rf-info.jinja2.py
 md5sum = ab666fdfadbfc7d8a16ace38d295c883
 
-[ncclient_common]
-_update_hash_filename_ = ncclient_common.py
+[ru_libinstance.jinja2.cfg]
+_update_hash_filename_ = ru/libinstance.jinja2.cfg
+md5sum = ef4b9c9ccbb4627c0d74293802e83d57
+
+[ru_sdr_libinstance.jinja2.cfg]
+_update_hash_filename_ = ru/sdr/libinstance.jinja2.cfg
+md5sum = 4be142fcd890e0f1c9573c8e724062fb
+
+[ru_lopcomm_libinstance.jinja2.cfg]
+_update_hash_filename_ = ru/lopcomm/libinstance.jinja2.cfg
+md5sum = 7b84e582f149da52013740251a2e7ce4
+
+[ru_sunwave_libinstance.jinja2.cfg]
+_update_hash_filename_ = ru/sunwave/libinstance.jinja2.cfg
+md5sum = 5c5248494bcd9d27d50636ee9fab7c87
+
+[ru_lopcomm_ncclient_common.py]
+_update_hash_filename_ = ru/lopcomm/ncclient_common.py
 md5sum = 6f8d0592cc4b0b695cea5a0c25aafc4e
 
-[lopcomm-rrh-stats.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-stats.jinja2.py
+[ru_lopcomm_stats.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/stats.jinja2.py
 md5sum = b861ef43beba4a0a2904e8c2aee04723
 
-[lopcomm-rrh-config.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-config.jinja2.py
+[ru_lopcomm_config.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/config.jinja2.py
 md5sum = f2f550b68c8ab243ce1a4bb73a9abc1c
 
-[lopcomm-rrh-software.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-software.jinja2.py
-md5sum = 2cd8515253b75e2ab13cc77399762851
-
-[lopcomm-rrh-supervision.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-supervision.jinja2.py
-md5sum = 243d9fbf640b8dc8bf63d69b07b8afed
-
-[lopcomm-rrh-reset-info.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-reset-info.jinja2.py
+[ru_lopcomm_reset-info.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/reset-info.jinja2.py
 md5sum = e03d7fea24566aa8291f0dc4aaf09c67
 
-[lopcomm-rrh-reset.jinja2.py]
-_update_hash_filename_ = lopcomm-rrh-reset.jinja2.py
+[ru_lopcomm_reset.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/reset.jinja2.py
 md5sum = 63472d5dc9bd46923d3941b5189e2ccd
 
+[ru_lopcomm_software.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/software.jinja2.py
+md5sum = 2cd8515253b75e2ab13cc77399762851
+
+[ru_lopcomm_supervision.jinja2.py]
+_update_hash_filename_ = ru/lopcomm/supervision.jinja2.py
+md5sum = 243d9fbf640b8dc8bf63d69b07b8afed
+
 [template-enb]
 _update_hash_filename_ = instance-enb.jinja2.cfg
-md5sum = 40f735514d8f4ead0d4328c58b78be93
+md5sum = 104d63450ec08d67bc6e82a9dacee6ae
 
 [template-gnb]
 _update_hash_filename_ = instance-gnb.jinja2.cfg
-md5sum = 2d7558e4799818a5546850f735fbb399
+md5sum = a64a0d06740f97cd82eeec0932f61004
 
 [template-core-network]
 _update_hash_filename_ = instance-core-network.jinja2.cfg
@@ -114,13 +130,13 @@ md5sum = c0313f9d15543361f7c8e19af96c737a
 filename = config/ue-nr.jinja2.cfg
 md5sum = 824233ab4d53ec428d358fb67bca8ba2
 
-[CreateProcessingEle.jinja2.xml]
-filename = netconf/CreateProcessingEle.jinja2.xml
+[ru_lopcomm_CreateProcessingEle.jinja2.xml]
+_update_hash_filename_ = ru/lopcomm/CreateProcessingEle.jinja2.xml
 md5sum = e435990eb0a0d4be41efa9bd16dce09b
 
-[cu_config.jinja2.xml]
-filename = netconf/cu_config.jinja2.xml
-md5sum = d10b063ad4edc760e154f7a8d63bea47
+[ru_lopcomm_cu_config.jinja2.xml]
+_update_hash_filename_ = ru/lopcomm/cu_config.jinja2.xml
+md5sum = 09123ad68c6d8e7e4e201bcc2ab331c6
 
 [software.cfg.html]
 _update_hash_filename_ = gadget/software.cfg.html

software/ors-amarisoft/instance-enb-input-schema.json.jinja2

@@ -423,17 +423,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-enb.jinja2.cfg

@@ -10,30 +10,9 @@ parts =
   amarisoft-stats-service
   amarisoft-rf-info-service
 {% if ru == "lopcomm" %}
-  lopcomm-firmware-dl
-  lopcomm-rrh-stats-service
-  lopcomm-rrh-supervision-service
-  lopcomm-rrh-reset-info-service
-{%  if slapparameter_dict.get("cron_schedule", None) %}
-  lopcomm-rrh-reset-cron
-{%  endif %}
-  lopcomm-rrh-config-template
-  lopcomm-rrh-software-template
-  netconf-connection-promise
-  firmware-update-promise
-  rrh-netconf-socket-promise
-  lopcomm-cu-config
   sshd-service
   sshd-add-authorized-key
   sshd-promise
-  check-lopcomm-vswr.py
-  check-lopcomm-pa-current.py
-  check-lopcomm-pa-output-power.py
-  check-lopcomm-lof.py
-  check-lopcomm-rssi.py
-  check-lopcomm-sync.py
-  check-lopcomm-config-log.py
-  check-lopcomm-stats-log.py
 {% endif %}
 {% if slapparameter_dict.get("dnsmasq", None) %}
   dnsmasq-service
@@ -46,7 +25,6 @@ parts =
 {% endif %}
   monitor-base
   publish-connection-information
-{% set extra_part_list = [] %}
 
 extends = {{ monitor_template }}
 
@@ -54,6 +32,10 @@ eggs-directory = {{ eggs_directory }}
 develop-eggs-directory = {{ develop_eggs_directory }}
 offline = true
 
+{%- import 'ru_libinstance.jinja2.cfg' as rulib   with context  %}
+{{ rulib.buildout() }}
+
+
 [monitor-httpd-conf-parameter]
 httpd-include-file = {{ buildout_directory }}/etc/httpd-include-file.conf
 port = ${monitor-instance-parameter:monitor-httpd-port}
@@ -107,15 +89,6 @@ version = {{ slapparameter_dict.get("enb_config_version") }}
 offline = false
 {% endif %}
 
-{% if slapparameter_dict.get("cu_config_link", None) %}
-[cu-config-dl]
-recipe = slapos.recipe.build:download
-url = {{ slapparameter_dict.get("cu_config_link") }}
-version = {{ slapparameter_dict.get("cu_config_version") }}
-offline = false
-{% endif %}
-
-
 [enb-sh-wrapper]
 recipe = slapos.recipe.template
 output = ${directory:bin}/${:_buildout_section_name_}
@@ -261,162 +234,6 @@ mode = 0775
 url = {{ amarisoft_rf_info_template }}
 output = ${directory:bin}/amarisoft-rf-info.py
 
-[lopcomm-rrh-stats-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-stats.log
-json-log-output = ${directory:var}/log/lopcomm-rrh-stats.json.log
-cfg-json-log-output = ${directory:var}/log/lopcomm-rrh-config.json.log
-supervision-json-log-output = ${directory:var}/log/lopcomm-rrh-supervision.json.log
-ncsession-json-log-output = ${directory:var}/log/lopcomm-rrh-ncsession.json.log
-software-json-log-output = ${directory:var}/log/lopcomm-rrh-software.json.log
-context =
-  section directory directory
-  section slap_configuration slap-configuration
-  key slapparameter_dict slap-configuration:configuration
-  key log_file :log-output
-  key json_log_file :json-log-output
-  key cfg_json_log_file :cfg-json-log-output
-  key supervision_json_log_file :supervision-json-log-output
-  key ncsession_json_log_file :ncsession-json-log-output
-  key software_json_log_file :software-json-log-output
-  raw testing {{ slapparameter_dict.get("testing", False) }}
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  raw buildout_directory_path {{ buildout_directory }}
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_stats_template }}
-output = ${directory:bin}/lopcomm-rrh-stats.py
-
-[lopcomm-cu-config]
-<= config-base
-{% if slapparameter_dict.get("cu_config_link", None) %}
-url = ${enb-config-dl:target}
-{% else %}
-url = {{ cu_config_template }}
-{% endif %}
-output = ${directory:etc}/cu_config.xml
-
-[lopcomm-rrh-config-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-config.log
-context =
-  section directory directory
-  section slap_configuration slap-configuration
-  key slapparameter_dict slap-configuration:configuration
-  key log_file :log-output
-  raw testing {{ slapparameter_dict.get("testing", False) }}
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  raw buildout_directory_path {{ buildout_directory }}
-  raw CreateProcessingEle_template {{ CreateProcessingEle_template }}
-  key cu_config_template lopcomm-cu-config:output
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_config_template }}
-output = ${directory:script}/lopcomm-rrh-config.py
-
-[lopcomm-rrh-software-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-software.log
-software-reply-json-log-output = ${directory:var}/log/lopcomm-rrh-software-reply.json.log
-remote-file-path = sftp://${user-info:pw-name}@[${slap-configuration:ipv6-random}]:${sshd-port:port}${lopcomm-firmware-dl:destination}
-context =
-  section directory directory
-  section slap_configuration slap-configuration
-  key slapparameter_dict slap-configuration:configuration
-  key log_file :log-output
-  key software_reply_json_log_file :software-reply-json-log-output
-  key remote_file_path :remote-file-path
-  raw testing {{ slapparameter_dict.get("testing", False) }}
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  raw buildout_directory_path {{ buildout_directory }}
-  raw etc_path ${directory:etc}
-  raw firmware_name ${lopcomm-firmware-dl:filename}
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_software_template }}
-output = ${directory:script}/lopcomm-rrh-software.py
-
-[lopcomm-rrh-supervision-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-supervision.log
-supervision-reply-json-log-output = ${directory:var}/log/lopcomm-rrh-supervision-reply.json.log
-context =
-  section directory directory
-  section slap_configuration slap-configuration
-  key slapparameter_dict slap-configuration:configuration
-  key log_file :log-output
-  key supervision_reply_json_log_file :supervision-reply-json-log-output
-  raw testing {{ slapparameter_dict.get("testing", False) }}
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  raw buildout_directory_path {{ buildout_directory }}
-  raw etc_path ${directory:etc}
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_supervision_template }}
-output = ${directory:bin}/lopcomm-rrh-supervision.py
-
-[lopcomm-rrh-reset-info-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-reset-info.log
-json-log-output = ${directory:var}/log/lopcomm-rrh-reset-info.json.log
-context =
-  section slap_configuration slap-configuration
-  key log_file :log-output
-  key json_log_file :json-log-output
-  raw stats_period {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-  raw testing {{ slapparameter_dict.get("testing", False) }}
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_reset_info_template }}
-output = ${directory:bin}/lopcomm-rrh-reset-info.py
-
-[lopcomm-rrh-reset-template]
-recipe = slapos.recipe.template:jinja2
-extensions = jinja2.ext.do
-log-output = ${directory:var}/log/lopcomm-rrh-reset.log
-json-log-output = ${directory:var}/log/lopcomm-rrh-reset.json.log
-context =
-  section slap_configuration slap-configuration
-  key log_file :log-output
-  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
-  raw buildout_directory_path {{ buildout_directory }}
-  import netaddr netaddr
-mode = 0775
-url = {{ lopcomm_rrh_reset_template }}
-output = ${directory:etc}/lopcomm-rrh-reset.py
-
-[lopcomm-rrh-reset-cron]
-recipe = slapos.cookbook:cron.d
-cron-entries = ${cron:cron-entries}
-name = rrh-resest
-frequency = {{ slapparameter_dict.get("cron_schedule", "") }}
-command = {{ buildout_directory}}/bin/pythonwitheggs ${lopcomm-rrh-reset-template:output}
-
-[netconf-connection-promise]
-<= monitor-promise-base
-promise = check_command_execute
-name = netconf-connection-promise.py
-config-command = [ -f ${directory:etc}/is_netconf_connected ]
-
-[firmware-update-promise]
-<= monitor-promise-base
-promise = check_command_execute
-name = firmware-update-promise.py
-config-command = [ -f ${directory:etc}/is_firmware_updated ]
-
-[rrh-netconf-socket-promise]
-<= monitor-promise-base
-promise = check_socket_listening
-name = rrh-netconf-socket-promise.py
-config-host = ${slap-configuration:tap-ipv6-gateway}
-config-port = 830
-
 [amarisoft-stats-service]
 recipe = slapos.cookbook:wrapper
 command-line = ${amarisoft-stats-template:output}
@@ -433,38 +250,6 @@ mode = 0775
 hash-files =
   ${amarisoft-rf-info-template:output}
 
-[lopcomm-rrh-stats-service]
-recipe = slapos.cookbook:wrapper
-command-line = ${lopcomm-rrh-stats-template:output}
-wrapper-path = ${directory:service}/lopcomm-rrh-stats
-mode = 0775
-hash-files =
-  ${lopcomm-rrh-stats-template:output}
-
-[lopcomm-rrh-supervision-service]
-recipe = slapos.cookbook:wrapper
-command-line = ${lopcomm-rrh-supervision-template:output}
-wrapper-path = ${directory:service}/lopcomm-rrh-supervision
-mode = 0775
-hash-files =
-  ${lopcomm-rrh-supervision-template:output}
-
-[lopcomm-rrh-reset-info-service]
-recipe = slapos.cookbook:wrapper
-command-line = ${lopcomm-rrh-reset-info-template:output}
-wrapper-path = ${directory:service}/lopcomm-rrh-reset-info
-mode = 0775
-hash-files =
-  ${lopcomm-rrh-reset-info-template:output}
-
-[lopcomm-firmware-dl]
-recipe = slapos.recipe.build:download
-url = https://lab.nexedi.com/nexedi/ors-utils/raw/master/lopcomm-firmware/${:filename}
-filename = PR.PRM61C70V1004.006.tar.gz
-md5sum = 5139019aae77c2f3178a99915f1c57dc
-destination = ${directory:etc}/${:filename}
-offline = false
-
 [user-info]
 recipe = slapos.cookbook:userinfo
 
@@ -584,7 +369,7 @@ monitor-gadget-url = ${:monitor-base-url}/gadget/software.cfg.html
 {% if ru == "lopcomm" %}
 ssh-command = ssh ${user-info:pw-name}@${slap-configuration:ipv6-random} -p ${sshd-port:port}
 ssh-url = ssh://${user-info:pw-name}@[${slap-configuration:ipv6-random}]:${sshd-port:port}
-ru-firmware = ${lopcomm-firmware-dl:filename}
+ru-firmware = {{ru_lopcomm_firmware_filename}}
 ru-ipv6 = ${slap-configuration:tap-ipv6-gateway}
 {% endif %}
 
@@ -614,7 +399,7 @@ promise = check_baseband_latency
 config-testing = {{ slapparameter_dict.get("testing", False) }}
 config-amarisoft-stats-log = ${amarisoft-stats-template:log-output}
 config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-config-min-txrx-delay = {{ slapparameter_dict.get("min_txrx_delay", 5) }}
+config-min-rxtx-delay = {{ slapparameter_dict.get("min_rxtx_delay", 0) }}
 
 [check-amarisoft-stats-log.py]
 <= macro.promise
@@ -623,79 +408,6 @@ output = ${directory:plugins}/check-amarisoft-stats-log.py
 config-testing = {{ slapparameter_dict.get("testing", False) }}
 config-amarisoft-stats-log = ${amarisoft-stats-template:log-output}
 config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-vswr.py]
-<= macro.promise
-promise = check_lopcomm_vswr
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-rssi.py]
-<= macro.promise
-promise = check_lopcomm_rssi
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-pa-current.py]
-<= macro.promise
-promise = check_lopcomm_pa_current
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-pa-output-power.py]
-<= macro.promise
-promise = check_lopcomm_pa_output_power
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-sync.py]
-<= macro.promise
-promise = check_lopcomm_sync
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-lof.py]
-<= macro.promise
-promise = check_lopcomm_lof
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-stats-log.py]
-<= macro.promise
-promise = check_lopcomm_stats_log
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-stats-log = ${lopcomm-rrh-stats-template:log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-[check-lopcomm-config-log.py]
-<= macro.promise
-promise = check_lopcomm_config_log
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-config-log = ${lopcomm-rrh-config-template:log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-
-{%  if ru == "lopcomm" %}
-{%-   set cell_list = slapparameter_dict.get('cell_list', {'default': {}}) %}
-{%-   for i, k in enumerate(cell_list) %}
-{%-     set sfp_port = cell_list[k].get('cpri_port_number', i) %}
-{%-     do extra_part_list.append('SFP%s-cpri-lock.py' % sfp_port) %}
-[SFP{{sfp_port}}-cpri-lock.py]
-<= macro.promise
-promise = check_cpri_lock
-config-testing = {{ slapparameter_dict.get("testing", False) }}
-config-sdr_dev  = {{ slapparameter_dict.get('sdr_number', 0) }}
-config-sfp_port = {{ sfp_port }}
-config-amarisoft-rf-info-log = ${amarisoft-rf-info-template:log-output}
-config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
-{%-  endfor %}
-{% endif %}
-
 [check-rx-saturated.py]
 <= macro.promise
 promise = check_rx_saturated
@@ -704,9 +416,3 @@ config-rf-rx-chan-list = {{ list(range(0, int(slapparameter_dict.get('n_antenna_
 config-amarisoft-stats-log = ${amarisoft-stats-template:log-output}
 config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
 config-max-rx-sample-db = {{ slapparameter_dict.get("max_rx_sample_db", 0) }}
-
-[buildout]
-parts +=
-{%- for part in extra_part_list %}
-    {{ part }}
-{%- endfor %}

software/ors-amarisoft/instance-fdd-enb-input-schema.json

@@ -256,17 +256,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-fdd-gnb-input-schema.json

@@ -299,17 +299,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-fdd-lopcomm-enb-input-schema.json

@@ -349,17 +349,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-fdd-lopcomm-gnb-input-schema.json

@@ -299,17 +299,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-fdd-ors-enb-input-schema.json

@@ -245,17 +245,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-fdd-ors-gnb-input-schema.json

@@ -299,17 +299,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-gnb-input-schema.json.jinja2

@@ -320,17 +320,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-gnb.jinja2.cfg

@@ -297,7 +297,7 @@ promise = check_baseband_latency
 config-testing = {{ slapparameter_dict.get("testing", False) }}
 config-amarisoft-stats-log = ${amarisoft-stats-template:log-output}
 config-stats-period = {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }}
-config-min-txrx-delay = {{ slapparameter_dict.get("min_txrx_delay", 5) }}
+config-min-rxtx-delay = {{ slapparameter_dict.get("min_rxtx_delay", 0) }}
 
 [check-amarisoft-stats-log.py]
 <= macro.promise

software/ors-amarisoft/instance-tdd-enb-input-schema.json

@@ -266,17 +266,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-tdd-gnb-input-schema.json

@@ -310,17 +310,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-tdd-m2ru-enb-input-schema.json

@@ -304,17 +304,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-tdd-m2ru-gnb-input-schema.json

@@ -310,17 +310,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-tdd-ors-enb-input-schema.json

@@ -255,17 +255,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance-tdd-ors-gnb-input-schema.json

@@ -310,17 +310,11 @@
       "type": "number",
       "default": 0
     },
-    "min_txrx_delay": {
+    "min_rxtx_delay": {
       "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
+      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
       "type": "number",
-      "default": 5
-    },
-    "avg_txrx_delay": {
-      "title": "Average available time for radio front end processing (ms)",
-      "description": "Average TX/RX diff threshold above which baseband latency promise will fail",
-      "type": "number",
-      "default": 7
+      "default": 0
     },
     "xlog_fluentbit_forward_host": {
       "title": "Address to Forward Xlog by Fluenbit",

software/ors-amarisoft/instance.cfg

@@ -38,6 +38,12 @@ context =
     raw bbu ${rf-mode:bbu}
     raw ru ${rf-mode:ru}
     $${:extra-context}
+import-list =
+    rawfile ru_libinstance.jinja2.cfg ${ru_libinstance.jinja2.cfg:target}
+    rawfile ru_sdr_libinstance.jinja2.cfg ${ru_sdr_libinstance.jinja2.cfg:target}
+    rawfile ru_lopcomm_libinstance.jinja2.cfg ${ru_lopcomm_libinstance.jinja2.cfg:target}
+    rawfile ru_sunwave_libinstance.jinja2.cfg ${ru_sunwave_libinstance.jinja2.cfg:target}
+
 
 [amarisoft]
 recipe = slapos.recipe.build
@@ -270,14 +276,16 @@ extra-context =
     raw sib23_template   ${sib23.jinja2.asn:target}
     raw amarisoft_stats_template   ${amarisoft-stats.jinja2.py:target}
     raw amarisoft_rf_info_template   ${amarisoft-rf-info.jinja2.py:target}
-    raw lopcomm_rrh_stats_template   ${lopcomm-rrh-stats.jinja2.py:target}
-    raw lopcomm_rrh_config_template   ${lopcomm-rrh-config.jinja2.py:target}
-    raw lopcomm_rrh_software_template   ${lopcomm-rrh-software.jinja2.py:target}
-    raw lopcomm_rrh_supervision_template   ${lopcomm-rrh-supervision.jinja2.py:target}
-    raw lopcomm_rrh_reset_info_template   ${lopcomm-rrh-reset-info.jinja2.py:target}
-    raw lopcomm_rrh_reset_template   ${lopcomm-rrh-reset.jinja2.py:target}
-    raw CreateProcessingEle_template   ${CreateProcessingEle.jinja2.xml:target}
-    raw cu_config_template   ${cu_config.jinja2.xml:target}
+    raw ru_lopcomm_stats_template   ${ru_lopcomm_stats.jinja2.py:target}
+    raw ru_lopcomm_config_template   ${ru_lopcomm_config.jinja2.py:target}
+    raw ru_lopcomm_software_template   ${ru_lopcomm_software.jinja2.py:target}
+    raw ru_lopcomm_supervision_template   ${ru_lopcomm_supervision.jinja2.py:target}
+    raw ru_lopcomm_reset_info_template   ${ru_lopcomm_reset-info.jinja2.py:target}
+    raw ru_lopcomm_reset_template   ${ru_lopcomm_reset.jinja2.py:target}
+    raw ru_lopcomm_CreateProcessingEle_template   ${ru_lopcomm_CreateProcessingEle.jinja2.xml:target}
+    raw ru_lopcomm_cu_config_template   ${ru_lopcomm_cu_config.jinja2.xml:target}
+    raw ru_lopcomm_firmware_path ${ru_lopcomm_firmware-dl:target}
+    raw ru_lopcomm_firmware_filename ${ru_lopcomm_firmware-dl:filename}
     raw openssl_location ${openssl:location}
     raw default_lte_bandwidth ${default-params:default-lte-bandwidth}
     raw default_lte_inactivity_timer ${default-params:default-lte-inactivity-timer}

software/ors-amarisoft/ru/buildout.cfg

+# ru/buildout.cfg provides common software code for handling Radio Units.
+
+[buildout]
+extends =
+  sdr/buildout.cfg
+  lopcomm/buildout.cfg
+  sunwave/buildout.cfg
+
+[ru_libinstance.jinja2.cfg]
+<= download-base

software/ors-amarisoft/ru/libinstance.jinja2.cfg

+{#- Package ru/libinstance provides common instance code for handling Radio Units and cells.
+
+    Use buildout() macro to emit instance-level code to
+    handle configured RU.
+
+    NOTE: driver-specific logic is implemented in rudrv.buildout() .
+#}
+
+{%- macro buildout()  %}
+{#-   part emits new buildout section and registers it into buildout.parts  #}
+{%-   set parts_list = [] %}
+{%-   macro part(name) %}
+{%-     do parts_list.append(name)  %}
+[{{ name }}]
+{%-   endmacro    %}
+
+{#-   promise emits new buildout section for a promise    #}
+{%-   macro promise(name)                                 %}
+{{ part('promise-'+name) }}
+<= monitor-promise-base
+name = {{ name }}.py
+config-testing = {{ slapparameter_dict.get("testing", False) }}
+config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
+{%-   endmacro %}
+
+{#-   import RU drivers                           #}
+{%-   import 'ru_sdr_libinstance.jinja2.cfg'      as rudrv_sdr      with context %}
+{%-   import 'ru_lopcomm_libinstance.jinja2.cfg'  as rudrv_lopcomm  with context %}
+{%-   import 'ru_sunwave_libinstance.jinja2.cfg'  as rudrv_sunwave  with context %}
+{%-   set rudrv_dict = namespace(sdr=rudrv_sdr,
+                                 lopcomm=rudrv_lopcomm,
+                                 sunwave=rudrv_sunwave) %}
+
+{#-   invoke RU-specific buildout handler #}
+{%-   set ru_type = {'lopcomm': 'lopcomm', 'm2ru': 'sunwave'}.get(ru, 'sdr') %}
+{%-   set rudrv = rudrv_dict[ru_type] %}
+{{    rudrv.buildout() }}
+
+
+[buildout]
+parts +=
+{%- for part in parts_list %}
+    {{ part }}
+{%- endfor %}
+{%- endmacro  %}

software/ors-amarisoft/ru/lopcomm/buildout.cfg

+# ru/lopcomm/buildout.cfg provides software code for handling Lopcomm ORAN Radio Units.
+
+[buildout]
+parts +=
+  ru_lopcomm_ncclient_common.py
+
+[ru_lopcomm_libinstance.jinja2.cfg]
+<= download-base
+
+[ru_lopcomm_config.jinja2.py]
+<= download-base
+
+[ru_lopcomm_reset-info.jinja2.py]
+<= download-base
+
+[ru_lopcomm_reset.jinja2.py]
+<= download-base
+
+[ru_lopcomm_stats.jinja2.py]
+<= download-base
+
+[ru_lopcomm_software.jinja2.py]
+<= download-base
+
+[ru_lopcomm_supervision.jinja2.py]
+<= download-base
+
+[ru_lopcomm_ncclient_common.py]
+<= download-base
+destination = ${buildout:directory}/ncclient_common.py
+
+[ru_lopcomm_CreateProcessingEle.jinja2.xml]
+<= download-base
+
+[ru_lopcomm_cu_config.jinja2.xml]
+<= download-base
+
+[ru_lopcomm_firmware-dl]
+recipe = slapos.recipe.build:download
+url = https://lab.nexedi.com/nexedi/ors-utils/raw/master/lopcomm-firmware/${:filename}
+filename = PR.PRM61C70V1004.006.tar.gz
+md5sum = 5139019aae77c2f3178a99915f1c57dc

software/ors-amarisoft/netconf/cu_config.jinja2.xml → software/ors-amarisoft/ru/lopcomm/cu_config.jinja2.xml

 <xc:config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
+{%- set n_antenna_dl = slapparameter_dict.get('n_antenna_dl', int(slap_configuration['configuration.default_n_antenna_dl'])) %}
+{%- set n_antenna_ul = slapparameter_dict.get('n_antenna_ul', int(slap_configuration['configuration.default_n_antenna_ul'])) %}
          <user-plane-configuration xc:operation="replace" xmlns="urn:o-ran:uplane-conf-option8:1.0">
-            <!-- low-level-t[r]x-links -->
-            <tx-links>
-               <name>TXA0P00C00</name>
-               <processing-element>PE0</processing-element>
-               <tx-array-carrier>TXA0CC00</tx-array-carrier>
-               <tx-endpoint>TXA0P00C00</tx-endpoint>
-            </tx-links>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <tx-links>	
-               <name>TXA0P01C00</name>	
-               <processing-element>PE0</processing-element>	
-               <tx-array-carrier>TXA0CC00</tx-array-carrier>	
-               <tx-endpoint>TXA0P01C00</tx-endpoint>	
-            </tx-links>
-{% endif %}
-            <tx-links>
-               <name>TXA0P00C01</name>
-               <processing-element>PE0</processing-element>
-               <tx-array-carrier>TXA0CC00</tx-array-carrier>
-               <tx-endpoint>TXA0P00C01</tx-endpoint>
-            </tx-links>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <tx-links>	
-               <name>TXA0P01C01</name>	
-               <processing-element>PE0</processing-element>	
-               <tx-array-carrier>TXA0CC00</tx-array-carrier>	
-               <tx-endpoint>TXA0P01C01</tx-endpoint>	
-            </tx-links>
-{% endif %}
-            <rx-links>
-               <name>RXA0P00C00</name>
-               <processing-element>PE0</processing-element>
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>
-               <rx-endpoint>RXA0P00C00</rx-endpoint>
-            </rx-links>
-            <rx-links>
-               <name>PRACH0P00C00</name>
-               <processing-element>PE0</processing-element>
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>
-               <rx-endpoint>PRACH0P00C00</rx-endpoint>
-            </rx-links>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <rx-links>	
-               <name>RXA0P01C00</name>	
-               <processing-element>PE0</processing-element>	
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>	
-               <rx-endpoint>RXA0P01C00</rx-endpoint>	
-            </rx-links>	
-            <rx-links>	
-               <name>PRACH0P01C00</name>	
-               <processing-element>PE0</processing-element>	
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>	
-               <rx-endpoint>PRACH0P01C00</rx-endpoint>	
-            </rx-links>
-{% endif %}
-            <rx-links>
-               <name>RXA0P00C01</name>
-               <processing-element>PE0</processing-element>
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>
-               <rx-endpoint>RXA0P00C01</rx-endpoint>
-            </rx-links>
-            <rx-links>
-               <name>PRACH0P00C01</name>
-               <processing-element>PE0</processing-element>
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>
-               <rx-endpoint>PRACH0P00C01</rx-endpoint>
-            </rx-links>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <rx-links>	
-               <name>RXA0P01C01</name>	
-               <processing-element>PE0</processing-element>	
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>	
-               <rx-endpoint>RXA0P01C01</rx-endpoint>	
-            </rx-links>	
-            <rx-links>	
-               <name>PRACH0P01C01</name>	
-               <processing-element>PE0</processing-element>	
-               <rx-array-carrier>RXA0CC00</rx-array-carrier>	
-               <rx-endpoint>PRACH0P01C01</rx-endpoint>	
-            </rx-links>
-{% endif %}
+            <!-- TX path: eaxcid → TxEndpoint
+                                             ↘
+                                               mod  → static TxEndpoint → TxArray
+                                             ↗
+                                   TxCarrier
+
+                 (static TxEndpoint, TxArray and their association are defined by RU itself)
+            -->
+{%- set TxCarrier = 'TXA0CC00'  %}
+{%- for ant in range(n_antenna_dl)  %}
+{%-   set port = ant // 2  %}
+{%-   set chan = ant %  2  %}
+{%-   set txep = 'TXA0P%02dC%02d' % (port, chan)  %}
+
+            <!-- TxAntenna{{ ant }} -->
             <tx-endpoints>
-               <name>TXA0P00C00</name>
+               <name>{{ txep }}</name>
                <e-axcid>
                   <o-du-port-bitmask>61440</o-du-port-bitmask>
                   <band-sector-bitmask>3968</band-sector-bitmask>
                   <ccid-bitmask>112</ccid-bitmask>
                   <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>0</eaxc-id>
+                  <eaxc-id>{{ ant }}</eaxc-id>
                </e-axcid>
             </tx-endpoints>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <tx-endpoints>	
-               <name>TXA0P01C00</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>2</eaxc-id>	
-               </e-axcid>	
-            </tx-endpoints>
-{% endif %}
-            <tx-endpoints>
-               <name>TXA0P00C01</name>
-               <e-axcid>
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>
-                  <band-sector-bitmask>3968</band-sector-bitmask>
-                  <ccid-bitmask>112</ccid-bitmask>
-                  <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>1</eaxc-id>
-               </e-axcid>
-            </tx-endpoints>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <tx-endpoints>	
-               <name>TXA0P01C01</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>3</eaxc-id>	
-               </e-axcid>	
-            </tx-endpoints>
-{% endif %}
-            <rx-endpoints>
-               <name>RXA0P00C00</name>
-               <e-axcid>
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>
-                  <band-sector-bitmask>3968</band-sector-bitmask>
-                  <ccid-bitmask>112</ccid-bitmask>
-                  <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>0</eaxc-id>
-               </e-axcid>
-            </rx-endpoints>
-            <rx-endpoints>
-               <name>PRACH0P00C00</name>
-               <e-axcid>
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>
-                  <band-sector-bitmask>3968</band-sector-bitmask>
-                  <ccid-bitmask>112</ccid-bitmask>
-                  <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>8</eaxc-id>
-               </e-axcid>
-            </rx-endpoints>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <rx-endpoints>	
-               <name>RXA0P01C00</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>2</eaxc-id>	
-               </e-axcid>	
-            </rx-endpoints>	
-            <rx-endpoints>	
-               <name>PRACH0P01C00</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>9</eaxc-id>	
-               </e-axcid>	
-            </rx-endpoints>
-{% endif %}
+            <tx-links>
+              <name>{{ txep }}</name>
+               <processing-element>PE0</processing-element>
+               <tx-array-carrier>{{ TxCarrier }}</tx-array-carrier>
+               <tx-endpoint>{{ txep }}</tx-endpoint>
+            </tx-links>
+{%- endfor %}
+
+
+            <!--
+                  RX path: eaxcid ← RxEndpoint
+                                  (data ∪ prach)
+                                             ↖
+                                               demod  ← static RxEndpoint ← RxArray
+                                             ↗
+                                   RxCarrier
+
+                 (static RxEndpoint, RxArray and their association are defined by RU itself)
+            -->
+{%- set RxCarrier = 'RXA0CC00'  %}
+{%- for ant in range(n_antenna_ul)  %}
+{%-   set port = ant // 2  %}
+{%-   set chan = ant %  2  %}
+{%-   set rxep    = 'RXA0P%02dC%02d'   % (port, chan)  %}
+{%-   set prachep = 'PRACH0P%02dC%02d' % (port, chan)  %}
+
+            <!-- RxAntenna{{ ant }} -->
             <rx-endpoints>
-               <name>RXA0P00C01</name>
+               <name>{{ rxep }}</name>
                <e-axcid>
                   <o-du-port-bitmask>61440</o-du-port-bitmask>
                   <band-sector-bitmask>3968</band-sector-bitmask>
                   <ccid-bitmask>112</ccid-bitmask>
                   <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>1</eaxc-id>
+                  <eaxc-id>{{ ant }}</eaxc-id>
                </e-axcid>
             </rx-endpoints>
             <rx-endpoints>
-               <name>PRACH0P00C01</name>
+               <name>{{ prachep }}</name>
                <e-axcid>
                   <o-du-port-bitmask>61440</o-du-port-bitmask>
                   <band-sector-bitmask>3968</band-sector-bitmask>
                   <ccid-bitmask>112</ccid-bitmask>
                   <ru-port-bitmask>15</ru-port-bitmask>
-                  <eaxc-id>24</eaxc-id>
+                  <eaxc-id>{{ 16*chan + 8 + port }}</eaxc-id>
                </e-axcid>
             </rx-endpoints>
-{% if slapparameter_dict.get('n_antenna_dl') == 4 %}
-            <rx-endpoints>	
-               <name>RXA0P01C01</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>3</eaxc-id>	
-               </e-axcid>	
-            </rx-endpoints>	
-            <rx-endpoints>	
-               <name>PRACH0P01C01</name>	
-               <e-axcid>	
-                  <o-du-port-bitmask>61440</o-du-port-bitmask>	
-                  <band-sector-bitmask>3968</band-sector-bitmask>	
-                  <ccid-bitmask>112</ccid-bitmask>	
-                  <ru-port-bitmask>15</ru-port-bitmask>	
-                  <eaxc-id>25</eaxc-id>	
-               </e-axcid>	
-            </rx-endpoints>
-{% endif %}
+            <rx-links>
+               <name>{{ rxep }}</name>
+               <processing-element>PE0</processing-element>
+               <rx-array-carrier>{{ RxCarrier }}</rx-array-carrier>
+               <rx-endpoint>{{ rxep }}</rx-endpoint>
+            </rx-links>
+            <rx-links>
+               <name>{{ prachep }}</name>
+               <processing-element>PE0</processing-element>
+               <rx-array-carrier>{{ RxCarrier }}</rx-array-carrier>
+               <rx-endpoint>{{ prachep }}</rx-endpoint>
+            </rx-links>
+{%- endfor %}
+
+
+            <!-- TX/RX carriers -->
             <tx-array-carriers>
-               <name>TXA0CC00</name>
+               <name>{{ TxCarrier }}</name>
 	           <absolute-frequency-center>{{ slapparameter_dict.get('dl_earfcn', 300) }}</absolute-frequency-center>
                <center-of-channel-bandwidth>{{ 1000000*slapparameter_dict.get('txa0cc00_center_frequency', 2140) }}</center-of-channel-bandwidth>
                <channel-bandwidth>{{ {'1.4 MHz': 1400000, '3 MHz': 3000000, '5 MHz': 5000000, '10 MHz': 10000000, '15 MHz': 15000000, '20 MHz': 20000000}.get(slapparameter_dict.get('bandwidth'), '20 MHz') }}</channel-bandwidth>	
@@ -222,7 +103,7 @@
                <downlink-sfn-offset>0</downlink-sfn-offset>
             </tx-array-carriers>
             <rx-array-carriers>
-               <name>RXA0CC00</name>
+               <name>{{ RxCarrier }}</name>
                <absolute-frequency-center>{{ slapparameter_dict.get('rxa0cc00_center_frequency_earfcn', 18300) }}</absolute-frequency-center>	
                <center-of-channel-bandwidth>{{ 1000000*slapparameter_dict.get('rxa0cc00_center_frequency', 1950) }}</center-of-channel-bandwidth>	
                <channel-bandwidth>{{ {'1.4 MHz': 1400000, '3 MHz': 3000000, '5 MHz': 5000000, '10 MHz': 10000000, '15 MHz': 15000000, '20 MHz': 20000000}.get(slapparameter_dict.get('bandwidth'), '20 MHz') }}</channel-bandwidth>	

software/ors-amarisoft/ru/lopcomm/libinstance.jinja2.cfg

+{#- Package ru/lopcomm/libinstance provides instance code for handling Lopcomm ORAN Radio Units. #}
+
+{%- macro buildout()  %}
+
+{#-  indicate whether RU is listening for netconf #}
+
+{{ promise('lopcomm-rrh-netconf-socket') }}
+promise = check_socket_listening
+config-host = ${slap-configuration:tap-ipv6-gateway}
+config-port = 830
+
+
+{#-  monitor state of netconf connection + keep on touching RU watchdog #}
+
+[lopcomm-rrh-supervision-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-supervision.log
+supervision-reply-json-log-output = ${directory:var}/log/lopcomm-rrh-supervision-reply.json.log
+context =
+  section directory directory
+  section slap_configuration slap-configuration
+  key slapparameter_dict slap-configuration:configuration
+  key log_file :log-output
+  key supervision_reply_json_log_file :supervision-reply-json-log-output
+  raw testing {{ slapparameter_dict.get("testing", False) }}
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  raw buildout_directory_path {{ buildout_directory }}
+  raw etc_path ${directory:etc}
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_supervision_template }}
+output = ${directory:bin}/lopcomm-rrh-supervision.py
+
+[lopcomm-rrh-supervision-service]
+recipe = slapos.cookbook:wrapper
+command-line = ${lopcomm-rrh-supervision-template:output}
+wrapper-path = ${directory:service}/lopcomm-rrh-supervision
+mode = 0775
+hash-files =
+  ${lopcomm-rrh-supervision-template:output}
+
+{{ promise('lopcomm-rrh-netconf-connection') }}
+promise = check_command_execute
+config-command = [ -f ${directory:etc}/is_netconf_connected ]
+
+
+{#-  push firmware to RU #}
+
+[lopcomm-rrh-software-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-software.log
+software-reply-json-log-output = ${directory:var}/log/lopcomm-rrh-software-reply.json.log
+remote-file-path = sftp://${user-info:pw-name}@[${slap-configuration:ipv6-random}]:${sshd-port:port}{{ru_lopcomm_firmware_path}}
+context =
+  section directory directory
+  section slap_configuration slap-configuration
+  key slapparameter_dict slap-configuration:configuration
+  key log_file :log-output
+  key software_reply_json_log_file :software-reply-json-log-output
+  key remote_file_path :remote-file-path
+  raw testing {{ slapparameter_dict.get("testing", False) }}
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  raw buildout_directory_path {{ buildout_directory }}
+  raw etc_path ${directory:etc}
+  raw firmware_name {{ru_lopcomm_firmware_filename}}
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_software_template }}
+output = ${directory:script}/lopcomm-rrh-software.py
+
+{{ promise('lopcomm-firmware') }}
+promise = check_command_execute
+config-command = [ -f ${directory:etc}/is_firmware_updated ]
+
+
+{#-  push config to RU #}
+
+{%   if slapparameter_dict.get("cu_config_link", None) %}
+[cu-config-dl]
+recipe = slapos.recipe.build:download
+url = {{ slapparameter_dict.get("cu_config_link") }}
+version = {{ slapparameter_dict.get("cu_config_version") }}
+offline = false
+{%   endif %}
+
+[lopcomm-cu-config]
+<= config-base
+{% if slapparameter_dict.get("cu_config_link", None) %}
+url = ${cu-config-dl:target}
+{% else %}
+url = {{ ru_lopcomm_cu_config_template }}
+{% endif %}
+output = ${directory:etc}/cu_config.xml
+
+[lopcomm-rrh-config-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-config.log
+context =
+  section directory directory
+  section slap_configuration slap-configuration
+  key slapparameter_dict slap-configuration:configuration
+  key log_file :log-output
+  raw testing {{ slapparameter_dict.get("testing", False) }}
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  raw buildout_directory_path {{ buildout_directory }}
+  raw CreateProcessingEle_template {{ ru_lopcomm_CreateProcessingEle_template }}
+  key cu_config_template lopcomm-cu-config:output
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_config_template }}
+output = ${directory:script}/lopcomm-rrh-config.py
+
+{{ promise('lopcomm-config-log') }}
+promise = check_lopcomm_config_log
+config-config-log = ${lopcomm-rrh-config-template:log-output}
+
+
+{#-  handle notifications from RU #}
+
+[lopcomm-rrh-stats-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-stats.log
+json-log-output = ${directory:var}/log/lopcomm-rrh-stats.json.log
+cfg-json-log-output = ${directory:var}/log/lopcomm-rrh-config.json.log
+supervision-json-log-output = ${directory:var}/log/lopcomm-rrh-supervision.json.log
+ncsession-json-log-output = ${directory:var}/log/lopcomm-rrh-ncsession.json.log
+software-json-log-output = ${directory:var}/log/lopcomm-rrh-software.json.log
+context =
+  section directory directory
+  section slap_configuration slap-configuration
+  key slapparameter_dict slap-configuration:configuration
+  key log_file :log-output
+  key json_log_file :json-log-output
+  key cfg_json_log_file :cfg-json-log-output
+  key supervision_json_log_file :supervision-json-log-output
+  key ncsession_json_log_file :ncsession-json-log-output
+  key software_json_log_file :software-json-log-output
+  raw testing {{ slapparameter_dict.get("testing", False) }}
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  raw buildout_directory_path {{ buildout_directory }}
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_stats_template }}
+output = ${directory:bin}/lopcomm-rrh-stats.py
+
+[lopcomm-rrh-stats-service]
+recipe = slapos.cookbook:wrapper
+command-line = ${lopcomm-rrh-stats-template:output}
+wrapper-path = ${directory:service}/lopcomm-rrh-stats
+mode = 0775
+hash-files =
+  ${lopcomm-rrh-stats-template:output}
+
+{{ promise('lopcomm-vswr') }}
+promise = check_lopcomm_vswr
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-rssi') }}
+promise = check_lopcomm_rssi
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-pa-current') }}
+promise = check_lopcomm_pa_current
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-pa-output-power') }}
+promise = check_lopcomm_pa_output_power
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-sync') }}
+promise = check_lopcomm_sync
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-lof') }}
+promise = check_lopcomm_lof
+config-netconf-log = ${lopcomm-rrh-stats-template:json-log-output}
+
+{{ promise('lopcomm-stats-log') }}
+promise = check_lopcomm_stats_log
+config-stats-log = ${lopcomm-rrh-stats-template:log-output}
+
+{%-   set cell_list = slapparameter_dict.get('cell_list', {'default': {}}) %}
+{%-   for i, k in enumerate(cell_list) %}
+{%-     set sfp_port = cell_list[k].get('cpri_port_number', i) %}
+{{ promise('SFP%d-cpri-lock' % sfp_port) }}
+promise = check_cpri_lock
+config-sdr_dev  = {{ slapparameter_dict.get('sdr_number', 0) }}
+config-sfp_port = {{ sfp_port }}
+config-amarisoft-rf-info-log = ${amarisoft-rf-info-template:log-output}
+{%-  endfor %}
+
+
+{#-  reset RU periodically #}
+
+{%- if slapparameter_dict.get("cron_schedule") %}
+
+[lopcomm-rrh-reset-info-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-reset-info.log
+json-log-output = ${directory:var}/log/lopcomm-rrh-reset-info.json.log
+context =
+  section slap_configuration slap-configuration
+  key log_file :log-output
+  key json_log_file :json-log-output
+  raw stats_period {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }}
+  raw testing {{ slapparameter_dict.get("testing", False) }}
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_reset_info_template }}
+output = ${directory:bin}/lopcomm-rrh-reset-info.py
+
+[lopcomm-rrh-reset-template]
+recipe = slapos.recipe.template:jinja2
+extensions = jinja2.ext.do
+log-output = ${directory:var}/log/lopcomm-rrh-reset.log
+json-log-output = ${directory:var}/log/lopcomm-rrh-reset.json.log
+context =
+  section slap_configuration slap-configuration
+  key log_file :log-output
+  raw python_path {{ buildout_directory}}/bin/pythonwitheggs
+  raw buildout_directory_path {{ buildout_directory }}
+  import netaddr netaddr
+mode = 0775
+url = {{ ru_lopcomm_reset_template }}
+output = ${directory:etc}/lopcomm-rrh-reset.py
+
+{{ part('lopcomm-reset-cron') }}
+recipe = slapos.cookbook:cron.d
+cron-entries = ${cron:cron-entries}
+name = rrh-resest
+frequency = {{ slapparameter_dict.get("cron_schedule", "") }}
+command = {{ buildout_directory}}/bin/pythonwitheggs ${lopcomm-rrh-reset-template:output}
+
+{{ part('lopcomm-reset-info-service') }}
+recipe = slapos.cookbook:wrapper
+command-line = ${lopcomm-rrh-reset-info-template:output}
+wrapper-path = ${directory:service}/lopcomm-rrh-reset-info
+mode = 0775
+hash-files =
+  ${lopcomm-rrh-reset-info-template:output}
+
+{%- endif %}
+
+{%- endmacro  %}

software/ors-amarisoft/ru/sdr/buildout.cfg

+# ru/sdr/buildout.cfg provides software code for handling SDR Radio Units.
+
+[ru_sdr_libinstance.jinja2.cfg]
+<= download-base

software/ors-amarisoft/ru/sdr/libinstance.jinja2.cfg

+{#- Package ru/sdr/libinstance provides instance code for handling SDR Radio Units. #}
+
+{%- macro buildout()  %}
+{#-  nothing SDR-specific #}
+{%- endmacro  %}

software/ors-amarisoft/ru/sunwave/buildout.cfg

+# ru/sunwave/buildout.cfg provides software code for handling SunWave Radio Units.
+
+[ru_sunwave_libinstance.jinja2.cfg]
+<= download-base

software/ors-amarisoft/ru/sunwave/libinstance.jinja2.cfg

+{#- Package ru/sunwave/libinstance provides instance code for handling SunWave Radio Units. #}
+
+{%- macro buildout()  %}
+{#-  nothing SunWave-specific #}
+{%- endmacro  %}

software/ors-amarisoft/software-base.cfg

@@ -15,11 +15,11 @@ extends =
   ../../component/dnsmasq/buildout.cfg
   ../../component/fluent-bit/buildout.cfg
   ../../component/openssh/buildout.cfg
+  ru/buildout.cfg
 
 parts +=
   template
   slapos-cookbook
-  ncclient_common
 # copy all configs by default
   mme.jinja2.cfg
   dnsmasq.jinja2.cfg
@@ -29,8 +29,6 @@ parts +=
   ue_db.jinja2.cfg
   ue-lte.jinja2.cfg
   ue-nr.jinja2.cfg
-  CreateProcessingEle.jinja2.xml
-  cu_config.jinja2.xml
   sib23.jinja2.asn
   monitor-httpd-extra-conf
 # copy all gadget file
@@ -57,34 +55,12 @@ output = ${buildout:directory}/template.cfg
 recipe = slapos.recipe.build:download
 url = ${:_profile_base_location_}/${:_update_hash_filename_}
 
-[ncclient_common]
-<= download-base
-destination = ${buildout:directory}/ncclient_common.py
-
 [amarisoft-stats.jinja2.py]
 <= download-base
 
 [amarisoft-rf-info.jinja2.py]
 <= download-base
 
-[lopcomm-rrh-stats.jinja2.py]
-<= download-base
-
-[lopcomm-rrh-config.jinja2.py]
-<= download-base
-
-[lopcomm-rrh-software.jinja2.py]
-<= download-base
-
-[lopcomm-rrh-supervision.jinja2.py]
-<= download-base
-
-[lopcomm-rrh-reset-info.jinja2.py]
-<= download-base
-
-[lopcomm-rrh-reset.jinja2.py]
-<= download-base
-
 [template-enb]
 <= download-base
 
@@ -111,10 +87,6 @@ url     = ${:_profile_base_location_}/${:_buildout_section_name_}
 recipe  = slapos.recipe.build:download
 url     = ${:_profile_base_location_}/config/${:_buildout_section_name_}
 
-[copy-netconf-to-instance]
-recipe  = slapos.recipe.build:download
-url     = ${:_profile_base_location_}/netconf/${:_buildout_section_name_}
-
 [gadget]
 recipe = slapos.recipe.template
 output = ${buildout:directory}/${:_buildout_section_name_}/renderjs.js
@@ -167,13 +139,6 @@ filename = ue-lte.jinja2.cfg
 <= copy-config-to-instance
 filename = ue-nr.jinja2.cfg
 
-[CreateProcessingEle.jinja2.xml]
-<= copy-netconf-to-instance
-filename = CreateProcessingEle.jinja2.xml
-[cu_config.jinja2.xml]
-<= copy-netconf-to-instance
-filename = cu_config.jinja2.xml
-
 # Download gadget files
 [software.cfg.html]
 <= copy-gadget-to-software
@@ -198,6 +163,7 @@ eggs =
   ${bcrypt:egg}
   xmltodict
   ncclient
+  ${lxml-python:egg}
 interpreter = pythonwitheggs
 
 [xlte-repository]

software/seleniumrunner/software.cfg

@@ -52,6 +52,3 @@ url = ${:_profile_base_location_}/${:filename}
 [template]
 <= macro-template
 output = ${buildout:directory}/template.cfg
-
-[versions]
-plone.recipe.command = 1.1

software/seleniumserver/buildout.hash.cfg

@@ -19,4 +19,4 @@ md5sum = 10e19df182c692b71ea552da183a0bcf
 
 [template-selenium]
 filename = instance-selenium.cfg.in
-md5sum = 2d84d5fb9306b88ef71e101acb46f684
+md5sum = 8c48c7bef34dd54ab3bd94c91f2bf041

software/seleniumserver/instance-selenium.cfg.in

@@ -97,28 +97,28 @@ environment =
 hostname = $${slap-configuration:ipv4-random}
 
 
-[selenium-server-node-instance-firefox-52]
-<= selenium-server-node-instance
-capabilities = browserName=firefox,maxInstances=3,marionette=true,platform=LINUX,version=${firefox-52:version},firefox_binary=${firefox-wrapper-52:location}
-java-args = -Dwebdriver.gecko.driver=${geckodriver-0.16.1:location}
-port = 7777
-
 [selenium-server-node-instance-firefox-60]
 <= selenium-server-node-instance
 capabilities = browserName=firefox,maxInstances=3,marionette=true,platform=LINUX,version=${firefox-60:version},firefox_binary=${firefox-wrapper-60:location}
 java-args = -Dwebdriver.gecko.driver=${geckodriver-0.22.0:location}
-port = 7778
+port = 7777
 
 [selenium-server-node-instance-firefox-68]
 <= selenium-server-node-instance
 capabilities = browserName=firefox,maxInstances=3,marionette=true,platform=LINUX,version=${firefox-68:version},firefox_binary=${firefox-wrapper-68:location}
 java-args = -Dwebdriver.gecko.driver=${geckodriver-0.24.0:location}
-port = 7779
+port = 7778
 
 [selenium-server-node-instance-firefox-78]
 <= selenium-server-node-instance
 capabilities = browserName=firefox,maxInstances=3,marionette=true,platform=LINUX,version=${firefox-78:version},firefox_binary=${firefox-wrapper-78:location}
 java-args = -Dwebdriver.gecko.driver=${geckodriver-0.24.0:location}
+port = 7779
+
+[selenium-server-node-instance-firefox-115]
+<= selenium-server-node-instance
+capabilities = browserName=firefox,maxInstances=3,marionette=true,platform=LINUX,version=${firefox-115:version},firefox_binary=${firefox-wrapper-115:location}
+java-args = -Dwebdriver.gecko.driver=${geckodriver-0.33.0:location}
 port = 7780
 
 [selenium-server-node-instance-chromium-69]
@@ -137,12 +137,10 @@ port = 7782
 [selenium-server-admin-password]
 recipe = slapos.cookbook:generate.password
 username = admin
-bytes = 12
 
 [selenium-server-selenium-password]
 recipe = slapos.cookbook:generate.password
 username = selenium
-bytes = 12
 
 
 [selenium-server-frontnend-certificate]
@@ -303,10 +301,10 @@ instance-promises =
   $${selenium-server-frontend-listen-promise:name}
   $${selenium-server-hub-listen-promise:name}
   $${selenium-server-hub-nodes-registered-promise:name}
-  $${selenium-server-node-firefox-52-listen-promise:name}
   $${selenium-server-node-firefox-60-listen-promise:name}
   $${selenium-server-node-firefox-68-listen-promise:name}
   $${selenium-server-node-firefox-78-listen-promise:name}
+  $${selenium-server-node-firefox-115-listen-promise:name}
   $${selenium-server-node-instance-chromium-69-listen-promise:name}
   $${selenium-server-node-instance-chromium-91-listen-promise:name}
 
@@ -353,11 +351,6 @@ inline =
   sys.exit(0 if expected_node_count == actual_node_count else 1)
 
 
-[selenium-server-node-firefox-52-listen-promise]
-<= check-port-listening-promise
-config-host = $${selenium-server-node-instance-firefox-52:hostname}
-config-port = $${selenium-server-node-instance-firefox-52:port}
-
 [selenium-server-node-firefox-60-listen-promise]
 <= check-port-listening-promise
 config-host = $${selenium-server-node-instance-firefox-60:hostname}
@@ -373,6 +366,11 @@ config-port = $${selenium-server-node-instance-firefox-68:port}
 config-host = $${selenium-server-node-instance-firefox-78:hostname}
 config-port = $${selenium-server-node-instance-firefox-78:port}
 
+[selenium-server-node-firefox-115-listen-promise]
+<= check-port-listening-promise
+config-host = $${selenium-server-node-instance-firefox-115:hostname}
+config-port = $${selenium-server-node-instance-firefox-115:port}
+
 [selenium-server-node-instance-chromium-69-listen-promise]
 <= check-port-listening-promise
 config-host = $${selenium-server-node-instance-chromium-69:hostname}

software/seleniumserver/software.cfg

@@ -75,3 +75,7 @@ post-install =
 [firefox-78]
 post-install =
   ${symlink-extra-fonts-to-firefox-fonts-dir:install}
+
+[firefox-115]
+post-install =
+  ${symlink-extra-fonts-to-firefox-fonts-dir:install}

software/seleniumserver/test/test.py

@@ -290,12 +290,12 @@ class TestBrowserSelection(WebServerMixin, SeleniumServerTestCase):
         'Gecko/20100101 Firefox/60.0',
         driver.execute_script('return navigator.userAgent'))
     driver.quit()
-    desired_capabilities['version'] = '52.9.0esr'
+    desired_capabilities['version'] = '115.3.1esr'
     driver = webdriver.Remote(
         command_executor=webdriver_url,
         desired_capabilities=desired_capabilities)
     self.assertIn(
-        'Gecko/20100101 Firefox/52.0',
+        'Gecko/20100101 Firefox/115.0',
         driver.execute_script('return navigator.userAgent'))
     driver.quit()
 
@@ -310,6 +310,12 @@ class TestFrontend(WebServerMixin, SeleniumServerTestCase):
     parsed = urllib.parse.urlparse(admin_url)
     self.assertEqual('admin', parsed.username)
     self.assertTrue(parsed.password)
+    self.assertEqual(
+      requests.get(
+        parsed._replace(netloc=f"[{parsed.hostname}]:{parsed.port}").geturl(),
+        verify=False).status_code,
+      requests.codes.unauthorized
+    )
 
     self.assertIn('Grid Console', requests.get(admin_url, verify=False).text)
 
@@ -319,6 +325,12 @@ class TestFrontend(WebServerMixin, SeleniumServerTestCase):
     parsed = urllib.parse.urlparse(webdriver_url)
     self.assertEqual('selenium', parsed.username)
     self.assertTrue(parsed.password)
+    self.assertEqual(
+      requests.get(
+        parsed._replace(netloc=f"[{parsed.hostname}]:{parsed.port}").geturl(),
+        verify=False).status_code,
+      requests.codes.unauthorized
+    )
 
     # XXX we are using a self signed certificate, but selenium 3.141.0 does
     # not expose API to ignore certificate verification
@@ -397,19 +409,6 @@ class TestSSHServer(SeleniumServerTestCase):
       self.assertIn(b"Welcome to SlapOS Selenium Server.", received)
 
 
-class TestFirefox52(
-    BrowserCompatibilityMixin,
-    SeleniumServerTestCase,
-    ImageComparisonTestCase,
-):
-  desired_capabilities = dict(DesiredCapabilities.FIREFOX, version='52.9.0esr')
-  user_agent = 'Gecko/20100101 Firefox/52.0'
-  # resizing window is not supported on firefox 52 geckodriver
-  @unittest.expectedFailure
-  def test_resize_window(self):
-    super().test_resize_window()
-
-
 class TestFirefox60(
     BrowserCompatibilityMixin,
     SeleniumServerTestCase,
@@ -427,6 +426,7 @@ class TestFirefox68(
   desired_capabilities = dict(DesiredCapabilities.FIREFOX, version='68.0.2esr')
   user_agent = 'Gecko/20100101 Firefox/68.0'
 
+
 class TestFirefox78(
     BrowserCompatibilityMixin,
     SeleniumServerTestCase,
@@ -436,6 +436,20 @@ class TestFirefox78(
   user_agent = 'Gecko/20100101 Firefox/78.0'
 
 
+class TestFirefox115(
+    BrowserCompatibilityMixin,
+    SeleniumServerTestCase,
+    ImageComparisonTestCase,
+):
+  desired_capabilities = dict(DesiredCapabilities.FIREFOX, version='115.3.1esr')
+  user_agent = 'Gecko/20100101 Firefox/115.0'
+
+  # resizing window does not work, but we don't really depend on it
+  @unittest.expectedFailure
+  def test_resize_window(self):
+    super().test_resize_window()
+
+
 class TestChrome69(
     BrowserCompatibilityMixin,
     SeleniumServerTestCase,