Commit 198b1113 authored by Kirill Smelkov's avatar Kirill Smelkov

software/ors-amarisoft: ue: Don't render UEsim input schemas for ORS

Those were unused because software.cfg.json.jinja2 explicitly enables UEsim only for bbu != 'ors'.
parent 753a9935
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
...@@ -97,6 +97,9 @@ for software in software_list: ...@@ -97,6 +97,9 @@ for software in software_list:
emit('software-{}.cfg'.format(software['software_name']), emit('software-{}.cfg'.format(software['software_name']),
software_template.render(**software, **global_context)) software_template.render(**software, **global_context))
for software_type in ['enb', 'gnb', 'ue-lte', 'ue-nr']: for software_type in ['enb', 'gnb', 'ue-lte', 'ue-nr']:
# no ue for ors
if software['bbu'] == 'ors' and software_type.startswith('ue-'):
continue
emit('instance-{}-{}-input-schema.json'.format( emit('instance-{}-{}-input-schema.json'.format(
software['software_name'], software['software_name'],
software_type), software_type),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment