- 06 Dec, 2023 4 commits
-
-
Alain Takoudjou authored
-
Alain Takoudjou authored
-
Alain Takoudjou authored
-
Alain Takoudjou authored
-
- 29 Nov, 2023 6 commits
-
-
Kirill Smelkov authored
- remove no longer used ru/lopcomm/supervision.jinja2.py - restore removed `+ keep on touching RU watchdog` comment. Now it relates to ru/lopcomm/stats which became responsible for this function. - move code of RU-netconf-connection promise to be located nearby stats service because this promise interacts with that service, and grouping code by interaction makes it easier to understand for humans. Previously RU-netconf-connection was interacting with supervision service whcsh is gone after the patch in question. - use double vertical space to delimit logical sections from each other. open questions: - before the patch in question stats code was reconnecting after each error with 10 seconds pause. Now it logs it wants to reconnect but does _not_ because top-level `while True` was removed. Was that intended? If it was not the intent then new stats code will fail after any single error and won't reconnect to RU by itself. /reviewed-by @lu.xu /reviewed-on nexedi/slapos!1483
-
Kirill Smelkov authored
Similarly to sdr-busy, if we have several radio units, we want each of them to have its own rx-saturated promise. See nexedi/slapos.toolbox!126 for corresponding part in slapos.toolbox that makes check_rx_saturated per-RU configurable. Not touching gnb.jinja2.cfg as currently gnb does not support multicell at all, and in the future it will be sole enb.cfg to handle both LTE and NR simultaneously. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1485
-
Kirill Smelkov authored
If we have several radio units, we want each of them to have its own sdr-busy promise. See nexedi/slapos.toolbox!125 for corresponding part in slapos.toolbox that makes check_sdr_busy per-RU configurable. Not touching gnb.jinja2.cfg as currently gnb does not support multicell at all, and in the future it will be sole enb.cfg to handle both LTE and NR simultaneously. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1485
-
Kirill Smelkov authored
This promise applies to any CPRI-based Radio Unit not only to Lopcomm RU. -> Move its code to generic part, so that the promise is generated for any CPRI-based RU. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1485
-
Kirill Smelkov authored
Because for-RU DHCP-server should be provided to all CPRI-based radio unit, not only to Lopcomm. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1485
-
Thomas Gambier authored
Also cleanup duplicated section
-
- 28 Nov, 2023 10 commits
-
-
Thomas Gambier authored
-
Kirill Smelkov authored
instead of requiring users to explicitly activate it via additional `dnsmasq` parameter. The reason here is simple: CPRI-based radio units, for example Lopcomm ORAN RU, need to be configured to go to radio, and for that configuration to work we need to be able to talk via TCP/IP to the RU. /cc @jhuge, @xavier_thompson, @Daetalus /reviewed-by @lu.xu /reviewed-on nexedi/slapos!1479
-
Kirill Smelkov authored
We already pushed dnsmasq part, that serves radio units into enb in 9f2b9db5. However we need to push those bits further to ru/ for the following reasons: - DHCP server is used to provide Radio Units with IP address only. - without IP address assigned those RUs cannot be initialized and do not go to radio at all. - in general we will need to initialize and setup radio units not only in eNB - for example UEsim will use the same code library to initialize radio units. Thus the proper place to keep everything required for RU to be operational have to be located inside ru/ and activated by that radio-units library. /cc @jhuge, @xavier_thompson, @Daetalus /reviewed-by @lu.xu /reviewed-on nexedi/slapos!1479
-
Kirill Smelkov authored
The code had check-rx-saturated under `if not ru == "lopcomm"`, but checking RX signal for saturation is implemented on eNB side, not by RU itself, and is RU-independent because eNB only receives raw samples from RU and decides on its own whether those samples are higher than saturation margin or not. As an extra proof that checking for RX saturation is meaningful for Lopcomm too here is how samples.rx data can look like in the case of 2 Lopcomm Radio Units: root@callbox-005:/srv/slapgrid/slappart16/var/log# cat amarisoft-stats.json.log |jq .data.samples.rx [ { "rms": -382.3080749511719, "max": -382.3080749511719, "sat": 0, "count": 1221181440, "rms_dbm": -382.3080749511719 }, { "rms": -382.3080749511719, "max": -382.3080749511719, "sat": 0, "count": 1221179392, "rms_dbm": -382.3080749511719 } ] ... i.e. all the data, that check-rx-saturated promise works on, is there. /cc @jhuge, @xavier_thompson, @Daetalus /reviewed-by @lu.xu /reviewed-on !1478
-
Thomas Gambier authored
-
Thomas Gambier authored
-
Thomas Gambier authored
-
Thomas Gambier authored
-
Thomas Gambier authored
On Fedora, the flag -lm is not correctly added so add it manually.
-
Thomas Gambier authored
Those warnings are breaking compilation on Fedora: [ 1280s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I. -I.. -I.. -Iglib -DIN_LIBTEXTSTYLE -DLIBXML_STATIC -I./libcroco -DDEPENDS_ON_LIBICONV=1 -I/home/abuild/rpmbuild/BUILD/sn_1.10.5+1.0.346+1/slapos/build/opt/slapos/parts/libxml2/include -I/home/abuild/rpmbuild/BUILD/sn_1.10.5+1.0.346+1/slapos/build/opt/slapos/parts/zlib/include -I/home/abuild/rpmbuild/BUILD/sn_1.10.5+1.0.346+1/slapos/build/opt/slapos/parts/ncurses/include -fanalyzer -Wall -Warith-conversion -Wcast-align=strict -Wdate-time -Wdisabled-optimization -Wdouble-promotion -Wduplicated-branches -Wduplicated-cond -Wextra -Wformat-signedness -Winit-self -Winvalid-pch -Wlogical-op -Wmissing-include-dirs -Wnested-externs -Wnull-dereference -Wopenmp-simd -Woverlength-strings -Wpacked -Wpointer-arith -Wstack-protector -Wstrict-overflow -Wsuggest-attribute=format -Wsuggest-final-methods -Wsuggest-final-types -Wsync-nand -Wsystem-headers -Wtrampolines -Wuninitialized -Wunknown-pragmas -Wunsafe-loop-optimizations -Wvariadic-macros -Wvector-operation-performance -Wwrite-strings -Warray-bounds=2 -Wattribute-alias=2 -Wbidi-chars=any,ucn -Wformat-overflow=2 -Wformat=2 -Wformat-truncation=2 -Wimplicit-fallthrough=5 -Wshift-overflow=2 -Wuse-after-free=3 -Wunused-const-variable=2 -Wvla-larger-than=4031 -Wno-analyzer-malloc-leak -Wno-empty-body -Wno-analyzer-double-fclose -Wno-analyzer-double-free -Wno-analyzer-null-argument -Wno-analyzer-null-dereference -Wno-analyzer-use-of-uninitialized-value -Wno-cast-align -Wno-format-nonliteral -Wno-sign-compare -Wno-type-limits -Wno-unused-parameter -Wno-clobbered -Wshadow=local -Wno-cast-function-type -Wno-duplicated-cond -Wno-format -Wno-implicit-fallthrough -Wno-null-dereference -Wno-suggest-attribute=format -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -mbranch-protection=standard -fasynchronous-unwind-tables -fstack-clash-protection -c libcroco/cr-additional-sel.c -fPIC -DPIC -o libcroco/.libs/rpl_la-cr-additional-sel.o [ 1280s] cc1: error: '-Wformat-security' ignored without '-Wformat' [-Werror=format-security] [ 1280s] cc1: some warnings being treated as errors
-
- 27 Nov, 2023 1 commit
-
-
Jérome Perrin authored
Some fixes for gcc12 and for ldd problems when some dev packages are installed See merge request nexedi/slapos!1482
-
- 25 Nov, 2023 6 commits
-
-
Jérome Perrin authored
to prevent using system package when ncurses-dev is installed
-
Jérome Perrin authored
to prevent from using system packages when libcurses-dev is installed
-
Jérome Perrin authored
This uses rbnacl-sodium which bundle an old version of libsodium that can not be compiled with gcc 12. This is an optional dependency to support ed25519 ssh keys, but we the slapos version of gitlab does not use ssh, only https, so we don't actually need to install this.
-
Jérome Perrin authored
-
Jérome Perrin authored
To prevent linking with system libtirpc if the corresponding system -dev package is installed
-
Jérome Perrin authored
We were using --without-ncurses but this does not prevent the build from using system package when ncurses-dev system package is installed.
-
- 24 Nov, 2023 6 commits
-
-
Kazuhiko Shiozaki authored
-
Kazuhiko Shiozaki authored
if only bison exists in PATH, we will get an error: /path/to/bison: m4 subprocess failed: No such file or directory
-
Kazuhiko Shiozaki authored
also copy libperfschema.a in lib directory to build mroonga with MariaDB >= 10.5.
-
Jérome Perrin authored
This was building against system library when ncurses-dev system package is installed
-
Thomas Gambier authored
-
Xavier Thompson authored
This concerns a case of resiliency in Theia: when a resilient Theia requests multiple import clones (by default only one is requested), e.g. when theia0 (export) has two import clones theia1 and theia2. Each clone requests a frontend for their theia service, which allows the Theia editor of the clone to be accessed without doing a takeover. Before this, all the import clones would request a frontend with the same name. This meant that only one frontend was allocated and might randomly redirect to one of the backup clones. See merge request nexedi/slapos!1481
-
- 23 Nov, 2023 4 commits
-
-
Lu Xu authored
accidentally removed [slaplte.jinja2] _update_hash_filename_ = slaplte.jinja2 md5sum = from buildout.hash.cfg
-
Lu Xu authored
The Netconf subscriptions were added twice, causing the RU to reboot because there was no supervision check on the redundant subscription.
-
Lu Xu authored
The Ncclient does not have a timeout for taking notifications, causing it to wait indefinitely. This can result in the connection being lost while the waiting process is still ongoing.
-
Kirill Smelkov authored
software/ors-amarisoft: Start of slaplte package by way of fixing standalone build of enb.cfg and gnb.cfg Please see individual patches for details. /cc @lu.xu, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1480
-
- 21 Nov, 2023 3 commits
-
-
Kirill Smelkov authored
After cell_list problem was fixed in the previous patch, now building enb.cfg in standalone mode fails on mme_addr: slapuser35@vifibcloud-rapidspace-hosting-018:~/srv/project/slapos/software/ors-amarisoft$ ./pythonwitheggs slapos-render-config.py Traceback (most recent call last): File "/srv/slapgrid/slappart35/srv/project/slapos/software/ors-amarisoft/./pythonwitheggs", line 47, in <module> exec(compile(__file__f.read(), __file__, "exec")) File "slapos-render-config.py", line 92, in <module> do('enb', {"tdd_ul_dl_config": "[Configuration 6] 5ms 5UL 3DL (maximum uplink)"}) File "slapos-render-config.py", line 90, in do j2render(cfg, json_params % locals()) File "slapos-render-config.py", line 38, in j2render f.write(r._render().decode()) File "/srv/slapgrid/slappart35/srv/runner/software/0b402c7d1e7c38a4324c836766690bb6/eggs/slapos.recipe.template-5.1-py3.9.egg/slapos/recipe/template/jinja2_template.py", line 215, in _render return template_object.render(**self.context).encode(self.encoding) File "/srv/slapgrid/slappart35/srv/runner/software/0b402c7d1e7c38a4324c836766690bb6/eggs/Jinja2-2.11.3-py3.9.egg/jinja2/environment.py", line 1090, in render self.environment.handle_exception() File "/srv/slapgrid/slappart35/srv/runner/software/0b402c7d1e7c38a4324c836766690bb6/eggs/Jinja2-2.11.3-py3.9.egg/jinja2/environment.py", line 832, in handle_exception reraise(*rewrite_traceback_stack(source=source)) File "/srv/slapgrid/slappart35/srv/runner/software/0b402c7d1e7c38a4324c836766690bb6/eggs/Jinja2-2.11.3-py3.9.egg/jinja2/_compat.py", line 28, in reraise raise value.with_traceback(tb) File "config/enb.jinja2.cfg", line 139, in top-level template code mme_addr: "{{ slap_configuration['configuration.mme_addr'] }}", jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'configuration.mme_addr' -> Fix it by providing both mme_addr in addition to amf_addr. Now both enb.cfg and gnb.cfg render in standalone mode well. /cc @jhuge, @lu.xu, @xavier_thompson, @Daetalus
-
Kirill Smelkov authored
In b0c37a4a (software/ors-amarisoft: Start to generalize existing lopcomm/multicell into multiRU slowly) I deduplicated cell_list initialization and moved it into single place, but overlooked that enb.cfg build became broken in standalone mode: .../software/ors-amarisoft$ ./pythonwitheggs slapos-render-config.py Traceback (most recent call last): File "/srv/slapgrid/slappart35/srv/project/slapos/software/ors-amarisoft/./pythonwitheggs", line 47, in <module> exec(compile(__file__f.read(), __file__, "exec")) File "slapos-render-config.py", line 88, in <module> do('enb', {"tdd_ul_dl_config": "[Configuration 6] 5ms 5UL 3DL (maximum uplink)"}) File "slapos-render-config.py", line 86, in do j2render(cfg, json_params % locals()) File "slapos-render-config.py", line 34, in j2render f.write(r._render().decode()) File ".../eggs/slapos.recipe.template-5.1-py3.9.egg/slapos/recipe/template/jinja2_template.py", line 215, in _render return template_object.render(**self.context).encode(self.encoding) File ".../eggs/Jinja2-2.11.3-py3.9.egg/jinja2/environment.py", line 1090, in render self.environment.handle_exception() File ".../eggs/Jinja2-2.11.3-py3.9.egg/jinja2/environment.py", line 832, in handle_exception reraise(*rewrite_traceback_stack(source=source)) File ".../eggs/Jinja2-2.11.3-py3.9.egg/jinja2/_compat.py", line 28, in reraise raise value.with_traceback(tb) File "config/enb.jinja2.cfg", line 1, in top-level template code {%- set cell_count = cell_list|length %} jinja2.exceptions.UndefinedError: 'cell_list' is undefined -> Fix it by teaching enb.jinja2.cfg to also load cell list in standalone by itself. Not touching gnb.jinja2.cfg as currently gnb does not support multicell at all, and in the future it will be sole enb.cfg to handle both LTE and NR simultaneously. /cc @jhuge, @lu.xu, @xavier_thompson, @Daetalus
-
Kirill Smelkov authored
This currently has severl problems which we'll be fixing up one by one in the followup patches. /cc @jhuge, @lu.xu, @xavier_thompson, @Daetalus
-