Commit c817cfd6 authored by yonghong-song's avatar yonghong-song Committed by GitHub

Merge pull request #1793 from qmonnet/kernelfeatures

sync BPF compat headers with latest bpf-next, update BPF features list
parents 0ec552a2 8ce57acc
...@@ -23,7 +23,7 @@ Constant blinding - PowerPC64 | 4.9 | [`b7b7013cac55`](https://git.kernel.org/cg ...@@ -23,7 +23,7 @@ Constant blinding - PowerPC64 | 4.9 | [`b7b7013cac55`](https://git.kernel.org/cg
Sparc64 | 4.12 | [`7a12b5031c6b`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7a12b5031c6b947cc13918237ae652b536243b76) Sparc64 | 4.12 | [`7a12b5031c6b`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7a12b5031c6b947cc13918237ae652b536243b76)
MIPS | 4.13 | [`f381bf6d82f0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=f381bf6d82f032b7410185b35d000ea370ac706b) MIPS | 4.13 | [`f381bf6d82f0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=f381bf6d82f032b7410185b35d000ea370ac706b)
ARM32 | 4.14 | [`39c13c204bb1`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=39c13c204bb1150d401e27d41a9d8b332be47c49) ARM32 | 4.14 | [`39c13c204bb1`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=39c13c204bb1150d401e27d41a9d8b332be47c49)
x86\_32 | ? | [Not upstream yet](https://lwn.net/Articles/752957/) x86\_32 | 4.18 | [`03f5781be2c7`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=03f5781be2c7b7e728d724ac70ba10799cc710d7)
## Main features ## Main features
...@@ -68,8 +68,10 @@ BPF used for monitoring socket RX/TX data | 4.17 | [`4f738adba30a`](https://git. ...@@ -68,8 +68,10 @@ BPF used for monitoring socket RX/TX data | 4.17 | [`4f738adba30a`](https://git.
BPF attached to raw tracepoints | 4.17 | [`c4f6699dfcb8`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4f6699dfcb8558d138fe838f741b2c10f416cf9) BPF attached to raw tracepoints | 4.17 | [`c4f6699dfcb8`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4f6699dfcb8558d138fe838f741b2c10f416cf9)
BPF attached to `bind()` system call | 4.17 | [`4fbac77d2d09`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4fbac77d2d092b475dda9eea66da674369665427) BPF attached to `bind()` system call | 4.17 | [`4fbac77d2d09`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4fbac77d2d092b475dda9eea66da674369665427)
BPF Type Format (BTF) | 4.18 | [`69b693f0aefa`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=69b693f0aefa0ed521e8bd02260523b5ae446ad7) BPF Type Format (BTF) | 4.18 | [`69b693f0aefa`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=69b693f0aefa0ed521e8bd02260523b5ae446ad7)
AF_XDP | ? | [Not upstream yet](https://lwn.net/Articles/752959/) AF_XDP | 4.18 | [`fbfc504a24f5`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fbfc504a24f53f7ebe128ab55cb5dba634f4ece8)
bpfilter | ? | [Not upstream yet](https://lwn.net/Articles/747504/) bpfilter | 4.18 | [`d2ba09c17a06`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=d2ba09c17a0647f899d6c20a11bab9e6d3382f07)
End.BPF action for seg6local LWT | 4.18 | [`004d4b274e2a`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=004d4b274e2a1a895a0e5dc66158b90a7d463d44)
BPF attached to LIRC devices | 4.18 | [`f4364dcfc86d`](https://git.kernel.org/cgit/linux/kernel/git/bpf/bpf-next.git/commit/?id=f4364dcfc86df7c1ca47b256eaf6b6d0cdd0d936)
## Tables (_a.k.a._ Maps) ## Tables (_a.k.a._ Maps)
...@@ -95,8 +97,10 @@ LPM trie (longest-prefix match) | 4.11 | [`b95a5c4db09b`](https://git.kernel.org ...@@ -95,8 +97,10 @@ LPM trie (longest-prefix match) | 4.11 | [`b95a5c4db09b`](https://git.kernel.org
Array of maps | 4.12 | [`56f668dfe00d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=56f668dfe00dcf086734f1c42ea999398fad6572) Array of maps | 4.12 | [`56f668dfe00d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=56f668dfe00dcf086734f1c42ea999398fad6572)
Hash of maps | 4.12 | [`bcc6b1b7ebf8`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bcc6b1b7ebf857a9fe56202e2be3361131588c15) Hash of maps | 4.12 | [`bcc6b1b7ebf8`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bcc6b1b7ebf857a9fe56202e2be3361131588c15)
Netdevice references | 4.14 | [`546ac1ffb70d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=546ac1ffb70d25b56c1126940e5ec639c4dd7413) Netdevice references | 4.14 | [`546ac1ffb70d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=546ac1ffb70d25b56c1126940e5ec639c4dd7413)
Socket references | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6) Socket references (array) | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6)
CPU references | 4.15 | [`6710e1126934`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6710e1126934d8b4372b4d2f9ae1646cd3f151bf) CPU references | 4.15 | [`6710e1126934`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6710e1126934d8b4372b4d2f9ae1646cd3f151bf)
AF_XDP socket (XSK) references | 4.18 | [`fbfc504a24f5`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fbfc504a24f53f7ebe128ab55cb5dba634f4ece8)
Socket references (hashmap) | 4.18 | [`81110384441a`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=81110384441a59cff47430f20f049e69b98c17f4)
## XDP ## XDP
...@@ -144,6 +148,7 @@ Helper | Kernel version | Commit ...@@ -144,6 +148,7 @@ Helper | Kernel version | Commit
`BPF_FUNC_csum_diff()` | 4.6 | [`7d672345ed29`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7d672345ed295b1356a5d9f7111da1d1d7d65867) `BPF_FUNC_csum_diff()` | 4.6 | [`7d672345ed29`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7d672345ed295b1356a5d9f7111da1d1d7d65867)
`BPF_FUNC_csum_update()` | 4.9 | [`36bbef52c7eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=36bbef52c7eb646ed6247055a2acd3851e317857) `BPF_FUNC_csum_update()` | 4.9 | [`36bbef52c7eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=36bbef52c7eb646ed6247055a2acd3851e317857)
`BPF_FUNC_current_task_under_cgroup()` | 4.9 | [`60d20f9195b2`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=60d20f9195b260bdf0ac10c275ae9f6016f9c069) `BPF_FUNC_current_task_under_cgroup()` | 4.9 | [`60d20f9195b2`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=60d20f9195b260bdf0ac10c275ae9f6016f9c069)
`BPF_FUNC_fib_lookup()` | 4.18 | [`87f5fc7e48dd`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=87f5fc7e48dd3175b30dd03b41564e1a8e136323)
`BPF_FUNC_get_cgroup_classid()` | 4.3 | [`8d20aabe1c76`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8d20aabe1c76cccac544d9fcc3ad7823d9e98a2d) `BPF_FUNC_get_cgroup_classid()` | 4.3 | [`8d20aabe1c76`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8d20aabe1c76cccac544d9fcc3ad7823d9e98a2d)
`BPF_FUNC_get_current_comm()` | 4.2 | [`ffeedafbf023`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ffeedafbf0236f03aeb2e8db273b3e5ae5f5bc89) `BPF_FUNC_get_current_comm()` | 4.2 | [`ffeedafbf023`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ffeedafbf0236f03aeb2e8db273b3e5ae5f5bc89)
`BPF_FUNC_get_current_pid_tgid()` | 4.2 | [`ffeedafbf023`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ffeedafbf0236f03aeb2e8db273b3e5ae5f5bc89) `BPF_FUNC_get_current_pid_tgid()` | 4.2 | [`ffeedafbf023`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ffeedafbf0236f03aeb2e8db273b3e5ae5f5bc89)
...@@ -156,17 +161,23 @@ Helper | Kernel version | Commit ...@@ -156,17 +161,23 @@ Helper | Kernel version | Commit
`BPF_FUNC_get_smp_processor_id()` | 4.1 | [`c04167ce2ca0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c04167ce2ca0ecaeaafef006cb0d65cf01b68e42) `BPF_FUNC_get_smp_processor_id()` | 4.1 | [`c04167ce2ca0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c04167ce2ca0ecaeaafef006cb0d65cf01b68e42)
`BPF_FUNC_get_socket_cookie()` | 4.12 | [`91b8270f2a4d`](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=91b8270f2a4d1d9b268de90451cdca63a70052d6) `BPF_FUNC_get_socket_cookie()` | 4.12 | [`91b8270f2a4d`](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=91b8270f2a4d1d9b268de90451cdca63a70052d6)
`BPF_FUNC_get_socket_uid()` | 4.12 | [`6acc5c291068`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6acc5c2910689fc6ee181bf63085c5efff6a42bd) `BPF_FUNC_get_socket_uid()` | 4.12 | [`6acc5c291068`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6acc5c2910689fc6ee181bf63085c5efff6a42bd)
`BPF_FUNC_get_stack()` | 4.18 | [`de2ff05f48af`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=de2ff05f48afcde816ff4edb217417f62f624ab5)
`BPF_FUNC_get_stackid()` | 4.6 | [`d5a3b1f69186`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d5a3b1f691865be576c2bffa708549b8cdccda19) `BPF_FUNC_get_stackid()` | 4.6 | [`d5a3b1f69186`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d5a3b1f691865be576c2bffa708549b8cdccda19)
`BPF_FUNC_getsockopt()` | 4.15 | [`cd86d1fd2102`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=cd86d1fd21025fdd6daf23d1288da405e7ad0ec6) `BPF_FUNC_getsockopt()` | 4.15 | [`cd86d1fd2102`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=cd86d1fd21025fdd6daf23d1288da405e7ad0ec6)
`BPF_FUNC_ktime_get_ns()` | 4.1 | [`d9847d310ab4`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d9847d310ab4003725e6ed1822682e24bd406908) `BPF_FUNC_ktime_get_ns()` | 4.1 | [`d9847d310ab4`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d9847d310ab4003725e6ed1822682e24bd406908)
`BPF_FUNC_l3_csum_replace()` | 4.1 | [`91bc4822c3d6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91bc4822c3d61b9bb7ef66d3b77948a4f9177954) `BPF_FUNC_l3_csum_replace()` | 4.1 | [`91bc4822c3d6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91bc4822c3d61b9bb7ef66d3b77948a4f9177954)
`BPF_FUNC_l4_csum_replace()` | 4.1 | [`91bc4822c3d6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91bc4822c3d61b9bb7ef66d3b77948a4f9177954) `BPF_FUNC_l4_csum_replace()` | 4.1 | [`91bc4822c3d6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91bc4822c3d61b9bb7ef66d3b77948a4f9177954)
`BPF_FUNC_lwt_push_encap()` | 4.18 | [`fe94cc290f53`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fe94cc290f535709d3c5ebd1e472dfd0aec7ee79)
`BPF_FUNC_lwt_seg6_action()` | 4.18 | [`fe94cc290f53`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fe94cc290f535709d3c5ebd1e472dfd0aec7ee79)
`BPF_FUNC_lwt_seg6_adjust_srh()` | 4.18 | [`fe94cc290f53`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fe94cc290f535709d3c5ebd1e472dfd0aec7ee79)
`BPF_FUNC_lwt_seg6_store_bytes()` | 4.18 | [`fe94cc290f53`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=fe94cc290f535709d3c5ebd1e472dfd0aec7ee79)
`BPF_FUNC_map_delete_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5) `BPF_FUNC_map_delete_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5)
`BPF_FUNC_map_lookup_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5) `BPF_FUNC_map_lookup_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5)
`BPF_FUNC_map_update_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5) `BPF_FUNC_map_update_elem()` | 3.19 | [`d0003ec01c66`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d0003ec01c667b731c139e23de3306a8b328ccf5)
`BPF_FUNC_msg_apply_bytes()` | 4.17 | [`2a100317c9eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2a100317c9ebc204a166f16294884fbf9da074ce) `BPF_FUNC_msg_apply_bytes()` | 4.17 | [`2a100317c9eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2a100317c9ebc204a166f16294884fbf9da074ce)
`BPF_FUNC_msg_cork_bytes()` | 4.17 | [`91843d540a13`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91843d540a139eb8070bcff8aa10089164436deb) `BPF_FUNC_msg_cork_bytes()` | 4.17 | [`91843d540a13`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91843d540a139eb8070bcff8aa10089164436deb)
`BPF_FUNC_msg_pull_data()` | 4.17 | [`015632bb30da`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=015632bb30daaaee64e1bcac07570860e0bf3092) `BPF_FUNC_msg_pull_data()` | 4.17 | [`015632bb30da`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=015632bb30daaaee64e1bcac07570860e0bf3092)
`BPF_FUNC_msg_redirect_hash()` | 4.18 | [`81110384441a`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=81110384441a59cff47430f20f049e69b98c17f4)
`BPF_FUNC_msg_redirect_map()` | 4.17 | [`4f738adba30a`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4f738adba30a7cfc006f605707e7aee847ffefa0) `BPF_FUNC_msg_redirect_map()` | 4.17 | [`4f738adba30a`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4f738adba30a7cfc006f605707e7aee847ffefa0)
`BPF_FUNC_perf_event_output()` | 4.4 | [`a43eec304259`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a43eec304259a6c637f4014a6d4767159b6a3aa3) `BPF_FUNC_perf_event_output()` | 4.4 | [`a43eec304259`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a43eec304259a6c637f4014a6d4767159b6a3aa3)
`BPF_FUNC_perf_event_read()` | 4.3 | [`35578d798400`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=35578d7984003097af2b1e34502bc943d40c1804) `BPF_FUNC_perf_event_read()` | 4.3 | [`35578d798400`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=35578d7984003097af2b1e34502bc943d40c1804)
...@@ -175,11 +186,14 @@ Helper | Kernel version | Commit ...@@ -175,11 +186,14 @@ Helper | Kernel version | Commit
`BPF_FUNC_probe_read()` | 4.1 | [`2541517c32be`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2541517c32be2531e0da59dfd7efc1ce844644f5) `BPF_FUNC_probe_read()` | 4.1 | [`2541517c32be`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2541517c32be2531e0da59dfd7efc1ce844644f5)
`BPF_FUNC_probe_read_str()` | 4.11 | [`a5e8c07059d0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a5e8c07059d0f0b31737408711d44794928ac218) `BPF_FUNC_probe_read_str()` | 4.11 | [`a5e8c07059d0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a5e8c07059d0f0b31737408711d44794928ac218)
`BPF_FUNC_probe_write_user()` | 4.8 | [`96ae52279594`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=96ae52279594470622ff0585621a13e96b700600) `BPF_FUNC_probe_write_user()` | 4.8 | [`96ae52279594`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=96ae52279594470622ff0585621a13e96b700600)
`BPF_FUNC_rc_keydown()` | 4.18 | [`f4364dcfc86d`](https://git.kernel.org/cgit/linux/kernel/git/bpf/bpf-next.git/commit/?id=f4364dcfc86df7c1ca47b256eaf6b6d0cdd0d936)
`BPF_FUNC_rc_repeat()` | 4.18 | [`f4364dcfc86d`](https://git.kernel.org/cgit/linux/kernel/git/bpf/bpf-next.git/commit/?id=f4364dcfc86df7c1ca47b256eaf6b6d0cdd0d936)
`BPF_FUNC_redirect()` | 4.4 | [`27b29f63058d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=27b29f63058d26c6c1742f1993338280d5a41dc6) `BPF_FUNC_redirect()` | 4.4 | [`27b29f63058d`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=27b29f63058d26c6c1742f1993338280d5a41dc6)
`BPF_FUNC_redirect_map()` | 4.14 | [`97f91a7cf04f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=97f91a7cf04ff605845c20948b8a80e54cbd3376) `BPF_FUNC_redirect_map()` | 4.14 | [`97f91a7cf04f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=97f91a7cf04ff605845c20948b8a80e54cbd3376)
`BPF_FUNC_set_hash()` | 4.13 | [`ded092cd73c2`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ded092cd73c2c56a394b936f86897f29b2e131c0) `BPF_FUNC_set_hash()` | 4.13 | [`ded092cd73c2`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ded092cd73c2c56a394b936f86897f29b2e131c0)
`BPF_FUNC_set_hash_invalid()` | 4.9 | [`7a4b28c6cc9f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7a4b28c6cc9ffac50f791b99cc7e46106436e5d8) `BPF_FUNC_set_hash_invalid()` | 4.9 | [`7a4b28c6cc9f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7a4b28c6cc9ffac50f791b99cc7e46106436e5d8)
`BPF_FUNC_setsockopt()` | 4.13 | [`8c4b4c7e9ff0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8c4b4c7e9ff0447995750d9329949fa082520269) `BPF_FUNC_setsockopt()` | 4.13 | [`8c4b4c7e9ff0`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8c4b4c7e9ff0447995750d9329949fa082520269)
`BPF_FUNC_sk_redirect_hash()` | 4.18 | [`81110384441a`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=81110384441a59cff47430f20f049e69b98c17f4)
`BPF_FUNC_sk_redirect_map()` | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6) `BPF_FUNC_sk_redirect_map()` | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6)
`BPF_FUNC_skb_adjust_room()` | 4.13 | [`2be7e212d541`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2be7e212d5419a400d051c84ca9fdd083e5aacac) `BPF_FUNC_skb_adjust_room()` | 4.13 | [`2be7e212d541`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2be7e212d5419a400d051c84ca9fdd083e5aacac)
`BPF_FUNC_skb_change_head()` | 4.10 | [`3a0af8fd61f9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3a0af8fd61f90920f6fa04e4f1e9a6a73c1b4fd2) `BPF_FUNC_skb_change_head()` | 4.10 | [`3a0af8fd61f9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3a0af8fd61f90920f6fa04e4f1e9a6a73c1b4fd2)
...@@ -190,6 +204,7 @@ Helper | Kernel version | Commit ...@@ -190,6 +204,7 @@ Helper | Kernel version | Commit
`BPF_FUNC_skb_get_tunnel_opt()` | 4.6 | [`14ca0751c96f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=14ca0751c96f8d3d0f52e8ed3b3236f8b34d3460) `BPF_FUNC_skb_get_tunnel_opt()` | 4.6 | [`14ca0751c96f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=14ca0751c96f8d3d0f52e8ed3b3236f8b34d3460)
`BPF_FUNC_skb_get_xfrm_state()` | 4.18 | [`12bed760a78d`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=12bed760a78da6e12ac8252fec64d019a9eac523) `BPF_FUNC_skb_get_xfrm_state()` | 4.18 | [`12bed760a78d`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=12bed760a78da6e12ac8252fec64d019a9eac523)
`BPF_FUNC_skb_load_bytes()` | 4.5 | [`05c74e5e53f6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=05c74e5e53f6cb07502c3e6a820f33e2777b6605) `BPF_FUNC_skb_load_bytes()` | 4.5 | [`05c74e5e53f6`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=05c74e5e53f6cb07502c3e6a820f33e2777b6605)
`BPF_FUNC_skb_load_bytes_relative()` | 4.18 | [`4e1ec56cdc59`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=4e1ec56cdc59746943b2acfab3c171b930187bbe)
`BPF_FUNC_skb_pull_data()` | 4.9 | [`36bbef52c7eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=36bbef52c7eb646ed6247055a2acd3851e317857) `BPF_FUNC_skb_pull_data()` | 4.9 | [`36bbef52c7eb`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=36bbef52c7eb646ed6247055a2acd3851e317857)
`BPF_FUNC_skb_set_tunnel_key()` | 4.3 | [`d3aa45ce6b94`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d3aa45ce6b94c65b83971257317867db13e5f492) `BPF_FUNC_skb_set_tunnel_key()` | 4.3 | [`d3aa45ce6b94`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d3aa45ce6b94c65b83971257317867db13e5f492)
`BPF_FUNC_skb_set_tunnel_opt()` | 4.6 | [`14ca0751c96f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=14ca0751c96f8d3d0f52e8ed3b3236f8b34d3460) `BPF_FUNC_skb_set_tunnel_opt()` | 4.6 | [`14ca0751c96f`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=14ca0751c96f8d3d0f52e8ed3b3236f8b34d3460)
...@@ -197,6 +212,7 @@ Helper | Kernel version | Commit ...@@ -197,6 +212,7 @@ Helper | Kernel version | Commit
`BPF_FUNC_skb_under_cgroup()` | 4.8 | [`4a482f34afcc`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4a482f34afcc162d8456f449b137ec2a95be60d8) `BPF_FUNC_skb_under_cgroup()` | 4.8 | [`4a482f34afcc`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4a482f34afcc162d8456f449b137ec2a95be60d8)
`BPF_FUNC_skb_vlan_pop()` | 4.3 | [`4e10df9a60d9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4e10df9a60d96ced321dd2af71da558c6b750078) `BPF_FUNC_skb_vlan_pop()` | 4.3 | [`4e10df9a60d9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4e10df9a60d96ced321dd2af71da558c6b750078)
`BPF_FUNC_skb_vlan_push()` | 4.3 | [`4e10df9a60d9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4e10df9a60d96ced321dd2af71da558c6b750078) `BPF_FUNC_skb_vlan_push()` | 4.3 | [`4e10df9a60d9`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4e10df9a60d96ced321dd2af71da558c6b750078)
`BPF_FUNC_sock_hash_update()` | 4.18 | [`81110384441a`](https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=81110384441a59cff47430f20f049e69b98c17f4)
`BPF_FUNC_sock_map_update()` | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6) `BPF_FUNC_sock_map_update()` | 4.14 | [`174a79ff9515`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=174a79ff9515f400b9a6115643dafd62a635b7e6)
`BPF_FUNC_tail_call()` | 4.2 | [`04fd61ab36ec`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=04fd61ab36ec065e194ab5e74ae34a5240d992bb) `BPF_FUNC_tail_call()` | 4.2 | [`04fd61ab36ec`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=04fd61ab36ec065e194ab5e74ae34a5240d992bb)
`BPF_FUNC_trace_printk()` | 4.1 | [`9c959c863f82`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=9c959c863f8217a2ff3d7c296e8223654d240569) `BPF_FUNC_trace_printk()` | 4.1 | [`9c959c863f82`](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=9c959c863f8217a2ff3d7c296e8223654d240569)
......
...@@ -96,6 +96,8 @@ enum bpf_cmd { ...@@ -96,6 +96,8 @@ enum bpf_cmd {
BPF_PROG_QUERY, BPF_PROG_QUERY,
BPF_RAW_TRACEPOINT_OPEN, BPF_RAW_TRACEPOINT_OPEN,
BPF_BTF_LOAD, BPF_BTF_LOAD,
BPF_BTF_GET_FD_BY_ID,
BPF_TASK_FD_QUERY,
}; };
enum bpf_map_type { enum bpf_map_type {
...@@ -116,6 +118,8 @@ enum bpf_map_type { ...@@ -116,6 +118,8 @@ enum bpf_map_type {
BPF_MAP_TYPE_DEVMAP, BPF_MAP_TYPE_DEVMAP,
BPF_MAP_TYPE_SOCKMAP, BPF_MAP_TYPE_SOCKMAP,
BPF_MAP_TYPE_CPUMAP, BPF_MAP_TYPE_CPUMAP,
BPF_MAP_TYPE_XSKMAP,
BPF_MAP_TYPE_SOCKHASH,
}; };
enum bpf_prog_type { enum bpf_prog_type {
...@@ -138,6 +142,8 @@ enum bpf_prog_type { ...@@ -138,6 +142,8 @@ enum bpf_prog_type {
BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_SK_MSG,
BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_RAW_TRACEPOINT,
BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
BPF_PROG_TYPE_LWT_SEG6LOCAL,
BPF_PROG_TYPE_LIRC_MODE2,
}; };
enum bpf_attach_type { enum bpf_attach_type {
...@@ -155,6 +161,9 @@ enum bpf_attach_type { ...@@ -155,6 +161,9 @@ enum bpf_attach_type {
BPF_CGROUP_INET6_CONNECT, BPF_CGROUP_INET6_CONNECT,
BPF_CGROUP_INET4_POST_BIND, BPF_CGROUP_INET4_POST_BIND,
BPF_CGROUP_INET6_POST_BIND, BPF_CGROUP_INET6_POST_BIND,
BPF_CGROUP_UDP4_SENDMSG,
BPF_CGROUP_UDP6_SENDMSG,
BPF_LIRC_MODE2,
__MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
}; };
...@@ -281,8 +290,8 @@ union bpf_attr { ...@@ -281,8 +290,8 @@ union bpf_attr {
char map_name[BPF_OBJ_NAME_LEN]; char map_name[BPF_OBJ_NAME_LEN];
__u32 map_ifindex; /* ifindex of netdev to create on */ __u32 map_ifindex; /* ifindex of netdev to create on */
__u32 btf_fd; /* fd pointing to a BTF type data */ __u32 btf_fd; /* fd pointing to a BTF type data */
__u32 btf_key_id; /* BTF type_id of the key */ __u32 btf_key_type_id; /* BTF type_id of the key */
__u32 btf_value_id; /* BTF type_id of the value */ __u32 btf_value_type_id; /* BTF type_id of the value */
}; };
struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
...@@ -343,6 +352,7 @@ union bpf_attr { ...@@ -343,6 +352,7 @@ union bpf_attr {
__u32 start_id; __u32 start_id;
__u32 prog_id; __u32 prog_id;
__u32 map_id; __u32 map_id;
__u32 btf_id;
}; };
__u32 next_id; __u32 next_id;
__u32 open_flags; __u32 open_flags;
...@@ -375,6 +385,22 @@ union bpf_attr { ...@@ -375,6 +385,22 @@ union bpf_attr {
__u32 btf_log_size; __u32 btf_log_size;
__u32 btf_log_level; __u32 btf_log_level;
}; };
struct {
__u32 pid; /* input: pid */
__u32 fd; /* input: fd */
__u32 flags; /* input: flags */
__u32 buf_len; /* input/output: buf len */
__aligned_u64 buf; /* input/output:
* tp_name for tracepoint
* symbol for kprobe
* filename for uprobe
*/
__u32 prog_id; /* output: prod_id */
__u32 fd_type; /* output: BPF_FD_TYPE_* */
__u64 probe_offset; /* output: probe_offset */
__u64 probe_addr; /* output: probe_addr */
} task_fd_query;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
/* The description below is an attempt at providing documentation to eBPF /* The description below is an attempt at providing documentation to eBPF
...@@ -828,12 +854,12 @@ union bpf_attr { ...@@ -828,12 +854,12 @@ union bpf_attr {
* *
* Also, be aware that the newer helper * Also, be aware that the newer helper
* **bpf_perf_event_read_value**\ () is recommended over * **bpf_perf_event_read_value**\ () is recommended over
* **bpf_perf_event_read*\ () in general. The latter has some ABI * **bpf_perf_event_read**\ () in general. The latter has some ABI
* quirks where error and counter value are used as a return code * quirks where error and counter value are used as a return code
* (which is wrong to do since ranges may overlap). This issue is * (which is wrong to do since ranges may overlap). This issue is
* fixed with bpf_perf_event_read_value(), which at the same time * fixed with **bpf_perf_event_read_value**\ (), which at the same
* provides more features over the **bpf_perf_event_read**\ () * time provides more features over the **bpf_perf_event_read**\
* interface. Please refer to the description of * () interface. Please refer to the description of
* **bpf_perf_event_read_value**\ () for details. * **bpf_perf_event_read_value**\ () for details.
* Return * Return
* The value of the perf event counter read from the map, or a * The value of the perf event counter read from the map, or a
...@@ -986,7 +1012,6 @@ union bpf_attr { ...@@ -986,7 +1012,6 @@ union bpf_attr {
* :: * ::
* *
* # sysctl kernel.perf_event_max_stack=<new value> * # sysctl kernel.perf_event_max_stack=<new value>
*
* Return * Return
* The positive or null stack id on success, or a negative error * The positive or null stack id on success, or a negative error
* in case of failure. * in case of failure.
...@@ -1361,7 +1386,7 @@ union bpf_attr { ...@@ -1361,7 +1386,7 @@ union bpf_attr {
* Return * Return
* 0 * 0
* *
* int bpf_setsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen) * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
* Description * Description
* Emulate a call to **setsockopt()** on the socket associated to * Emulate a call to **setsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at * *bpf_socket*, which must be a full socket. The *level* at
...@@ -1435,7 +1460,7 @@ union bpf_attr { ...@@ -1435,7 +1460,7 @@ union bpf_attr {
* Return * Return
* **SK_PASS** on success, or **SK_DROP** on error. * **SK_PASS** on success, or **SK_DROP** on error.
* *
* int bpf_sock_map_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * int bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
* Description * Description
* Add an entry to, or update a *map* referencing sockets. The * Add an entry to, or update a *map* referencing sockets. The
* *skops* is used as a new value for the entry associated to * *skops* is used as a new value for the entry associated to
...@@ -1533,7 +1558,7 @@ union bpf_attr { ...@@ -1533,7 +1558,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_perf_prog_read_value(struct bpf_perf_event_data_kern *ctx, struct bpf_perf_event_value *buf, u32 buf_size) * int bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
* Description * Description
* For en eBPF program attached to a perf event, retrieve the * For en eBPF program attached to a perf event, retrieve the
* value of the event counter associated to *ctx* and store it in * value of the event counter associated to *ctx* and store it in
...@@ -1544,7 +1569,7 @@ union bpf_attr { ...@@ -1544,7 +1569,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_getsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen) * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
* Description * Description
* Emulate a call to **getsockopt()** on the socket associated to * Emulate a call to **getsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at * *bpf_socket*, which must be a full socket. The *level* at
...@@ -1588,7 +1613,7 @@ union bpf_attr { ...@@ -1588,7 +1613,7 @@ union bpf_attr {
* Return * Return
* 0 * 0
* *
* int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops_kern *bpf_sock, int argval) * int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval)
* Description * Description
* Attempt to set the value of the **bpf_sock_ops_cb_flags** field * Attempt to set the value of the **bpf_sock_ops_cb_flags** field
* for the full TCP socket associated to *bpf_sock_ops* to * for the full TCP socket associated to *bpf_sock_ops* to
...@@ -1721,7 +1746,7 @@ union bpf_attr { ...@@ -1721,7 +1746,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_bind(struct bpf_sock_addr_kern *ctx, struct sockaddr *addr, int addr_len) * int bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len)
* Description * Description
* Bind the socket associated to *ctx* to the address pointed by * Bind the socket associated to *ctx* to the address pointed by
* *addr*, of length *addr_len*. This allows for making outgoing * *addr*, of length *addr_len*. This allows for making outgoing
...@@ -1767,6 +1792,268 @@ union bpf_attr { ...@@ -1767,6 +1792,268 @@ union bpf_attr {
* **CONFIG_XFRM** configuration option. * **CONFIG_XFRM** configuration option.
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
*
* int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags)
* Description
* Return a user or a kernel stack in bpf program provided buffer.
* To achieve this, the helper needs *ctx*, which is a pointer
* to the context on which the tracing program is executed.
* To store the stacktrace, the bpf program provides *buf* with
* a nonnegative *size*.
*
* The last argument, *flags*, holds the number of stack frames to
* skip (from 0 to 255), masked with
* **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
* the following flags:
*
* **BPF_F_USER_STACK**
* Collect a user space stack instead of a kernel stack.
* **BPF_F_USER_BUILD_ID**
* Collect buildid+offset instead of ips for user stack,
* only valid if **BPF_F_USER_STACK** is also specified.
*
* **bpf_get_stack**\ () can collect up to
* **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
* to sufficient large buffer size. Note that
* this limit can be controlled with the **sysctl** program, and
* that it should be manually increased in order to profile long
* user stacks (such as stacks for Java programs). To do so, use:
*
* ::
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
* A non-negative value equal to or less than *size* on success,
* or a negative error in case of failure.
*
* int skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
* This helper is similar to **bpf_skb_load_bytes**\ () in that
* it provides an easy way to load *len* bytes from *offset*
* from the packet associated to *skb*, into the buffer pointed
* by *to*. The difference to **bpf_skb_load_bytes**\ () is that
* a fifth argument *start_header* exists in order to select a
* base offset to start from. *start_header* can be one of:
*
* **BPF_HDR_START_MAC**
* Base offset to load data from is *skb*'s mac header.
* **BPF_HDR_START_NET**
* Base offset to load data from is *skb*'s network header.
*
* In general, "direct packet access" is the preferred method to
* access packet data, however, this helper is in particular useful
* in socket filters where *skb*\ **->data** does not always point
* to the start of the mac header and where "direct packet access"
* is not available.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
* Description
* Do FIB lookup in kernel tables using parameters in *params*.
* If lookup is successful and result shows packet is to be
* forwarded, the neighbor tables are searched for the nexthop.
* If successful (ie., FIB lookup shows forwarding and nexthop
* is resolved), the nexthop address is returned in ipv4_dst
* or ipv6_dst based on family, smac is set to mac address of
* egress device, dmac is set to nexthop mac address, rt_metric
* is set to metric from route (IPv4/IPv6 only).
*
* *plen* argument is the size of the passed in struct.
* *flags* argument can be a combination of one or more of the
* following values:
*
* **BPF_FIB_LOOKUP_DIRECT**
* Do a direct table lookup vs full lookup using FIB
* rules.
* **BPF_FIB_LOOKUP_OUTPUT**
* Perform lookup from an egress perspective (default is
* ingress).
*
* *ctx* is either **struct xdp_md** for XDP programs or
* **struct sk_buff** tc cls_act programs.
* Return
* Egress device index on success, 0 if packet needs to continue
* up the stack for further processing or a negative error in case
* of failure.
*
* int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
* Description
* Add an entry to, or update a sockhash *map* referencing sockets.
* The *skops* is used as a new value for the entry associated to
* *key*. *flags* is one of:
*
* **BPF_NOEXIST**
* The entry for *key* must not exist in the map.
* **BPF_EXIST**
* The entry for *key* must already exist in the map.
* **BPF_ANY**
* No condition on the existence of the entry for *key*.
*
* If the *map* has eBPF programs (parser and verdict), those will
* be inherited by the socket being added. If the socket is
* already attached to eBPF programs, this results in an error.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
* Description
* This helper is used in programs implementing policies at the
* socket level. If the message *msg* is allowed to pass (i.e. if
* the verdict eBPF program returns **SK_PASS**), redirect it to
* the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
* egress interfaces can be used for redirection. The
* **BPF_F_INGRESS** value in *flags* is used to make the
* distinction (ingress path is selected if the flag is present,
* egress path otherwise). This is the only flag supported for now.
* Return
* **SK_PASS** on success, or **SK_DROP** on error.
*
* int bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
* Description
* This helper is used in programs implementing policies at the
* skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
* if the verdeict eBPF program returns **SK_PASS**), redirect it
* to the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
* egress interfaces can be used for redirection. The
* **BPF_F_INGRESS** value in *flags* is used to make the
* distinction (ingress path is selected if the flag is present,
* egress otherwise). This is the only flag supported for now.
* Return
* **SK_PASS** on success, or **SK_DROP** on error.
*
* int bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
* Description
* Encapsulate the packet associated to *skb* within a Layer 3
* protocol header. This header is provided in the buffer at
* address *hdr*, with *len* its size in bytes. *type* indicates
* the protocol of the header and can be one of:
*
* **BPF_LWT_ENCAP_SEG6**
* IPv6 encapsulation with Segment Routing Header
* (**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
* the IPv6 header is computed by the kernel.
* **BPF_LWT_ENCAP_SEG6_INLINE**
* Only works if *skb* contains an IPv6 packet. Insert a
* Segment Routing Header (**struct ipv6_sr_hdr**) inside
* the IPv6 header.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len)
* Description
* Store *len* bytes from address *from* into the packet
* associated to *skb*, at *offset*. Only the flags, tag and TLVs
* inside the outermost IPv6 Segment Routing Header can be
* modified through this helper.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta)
* Description
* Adjust the size allocated to TLVs in the outermost IPv6
* Segment Routing Header contained in the packet associated to
* *skb*, at position *offset* by *delta* bytes. Only offsets
* after the segments are accepted. *delta* can be as well
* positive (growing) as negative (shrinking).
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len)
* Description
* Apply an IPv6 Segment Routing action of type *action* to the
* packet associated to *skb*. Each action takes a parameter
* contained at address *param*, and of length *param_len* bytes.
* *action* can be one of:
*
* **SEG6_LOCAL_ACTION_END_X**
* End.X action: Endpoint with Layer-3 cross-connect.
* Type of *param*: **struct in6_addr**.
* **SEG6_LOCAL_ACTION_END_T**
* End.T action: Endpoint with specific IPv6 table lookup.
* Type of *param*: **int**.
* **SEG6_LOCAL_ACTION_END_B6**
* End.B6 action: Endpoint bound to an SRv6 policy.
* Type of param: **struct ipv6_sr_hdr**.
* **SEG6_LOCAL_ACTION_END_B6_ENCAP**
* End.B6.Encap action: Endpoint bound to an SRv6
* encapsulation policy.
* Type of param: **struct ipv6_sr_hdr**.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
* Description
* This helper is used in programs implementing IR decoding, to
* report a successfully decoded key press with *scancode*,
* *toggle* value in the given *protocol*. The scancode will be
* translated to a keycode using the rc keymap, and reported as
* an input key down event. After a period a key up event is
* generated. This period can be extended by calling either
* **bpf_rc_keydown** () again with the same values, or calling
* **bpf_rc_repeat** ().
*
* Some protocols include a toggle bit, in case the button was
* released and pressed again between consecutive scancodes.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
* The *protocol* is the decoded protocol number (see
* **enum rc_proto** for some predefined values).
*
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
*
* Return
* 0
*
* int bpf_rc_repeat(void *ctx)
* Description
* This helper is used in programs implementing IR decoding, to
* report a successfully decoded repeat key message. This delays
* the generation of a key up event for previously generated
* key down event.
*
* Some IR protocols like NEC have a special IR message for
* repeating last button, for when a button is held down.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
*
* Return
* 0
*/ */
#define __BPF_FUNC_MAPPER(FN) \ #define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \ FN(unspec), \
...@@ -1835,7 +2122,19 @@ union bpf_attr { ...@@ -1835,7 +2122,19 @@ union bpf_attr {
FN(msg_pull_data), \ FN(msg_pull_data), \
FN(bind), \ FN(bind), \
FN(xdp_adjust_tail), \ FN(xdp_adjust_tail), \
FN(skb_get_xfrm_state), FN(skb_get_xfrm_state), \
FN(get_stack), \
FN(skb_load_bytes_relative), \
FN(fib_lookup), \
FN(sock_hash_update), \
FN(msg_redirect_hash), \
FN(sk_redirect_hash), \
FN(lwt_push_encap), \
FN(lwt_seg6_store_bytes), \
FN(lwt_seg6_adjust_srh), \
FN(lwt_seg6_action), \
FN(rc_repeat), \
FN(rc_keydown),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper /* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call * function eBPF program intends to call
...@@ -1869,11 +2168,14 @@ enum bpf_func_id { ...@@ -1869,11 +2168,14 @@ enum bpf_func_id {
/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
#define BPF_F_TUNINFO_IPV6 (1ULL << 0) #define BPF_F_TUNINFO_IPV6 (1ULL << 0)
/* BPF_FUNC_get_stackid flags. */ /* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */
#define BPF_F_SKIP_FIELD_MASK 0xffULL #define BPF_F_SKIP_FIELD_MASK 0xffULL
#define BPF_F_USER_STACK (1ULL << 8) #define BPF_F_USER_STACK (1ULL << 8)
/* flags used by BPF_FUNC_get_stackid only. */
#define BPF_F_FAST_STACK_CMP (1ULL << 9) #define BPF_F_FAST_STACK_CMP (1ULL << 9)
#define BPF_F_REUSE_STACKID (1ULL << 10) #define BPF_F_REUSE_STACKID (1ULL << 10)
/* flags used by BPF_FUNC_get_stack only. */
#define BPF_F_USER_BUILD_ID (1ULL << 11)
/* BPF_FUNC_skb_set_tunnel_key flags. */ /* BPF_FUNC_skb_set_tunnel_key flags. */
#define BPF_F_ZERO_CSUM_TX (1ULL << 1) #define BPF_F_ZERO_CSUM_TX (1ULL << 1)
...@@ -1893,6 +2195,18 @@ enum bpf_adj_room_mode { ...@@ -1893,6 +2195,18 @@ enum bpf_adj_room_mode {
BPF_ADJ_ROOM_NET, BPF_ADJ_ROOM_NET,
}; };
/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
enum bpf_hdr_start_off {
BPF_HDR_START_MAC,
BPF_HDR_START_NET,
};
/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
enum bpf_lwt_encap_mode {
BPF_LWT_ENCAP_SEG6,
BPF_LWT_ENCAP_SEG6_INLINE
};
/* user accessible mirror of in-kernel sk_buff. /* user accessible mirror of in-kernel sk_buff.
* new fields can only be added to the end of this structure * new fields can only be added to the end of this structure
*/ */
...@@ -2026,6 +2340,14 @@ enum sk_action { ...@@ -2026,6 +2340,14 @@ enum sk_action {
struct sk_msg_md { struct sk_msg_md {
void *data; void *data;
void *data_end; void *data_end;
__u32 family;
__u32 remote_ip4; /* Stored in network byte order */
__u32 local_ip4; /* Stored in network byte order */
__u32 remote_ip6[4]; /* Stored in network byte order */
__u32 local_ip6[4]; /* Stored in network byte order */
__u32 remote_port; /* Stored in network byte order */
__u32 local_port; /* stored in host byte order */
}; };
#define BPF_TAG_SIZE 8 #define BPF_TAG_SIZE 8
...@@ -2047,6 +2369,10 @@ struct bpf_prog_info { ...@@ -2047,6 +2369,10 @@ struct bpf_prog_info {
__u32 gpl_compatible:1; __u32 gpl_compatible:1;
__u64 netns_dev; __u64 netns_dev;
__u64 netns_ino; __u64 netns_ino;
__u32 nr_jited_ksyms;
__u32 nr_jited_func_lens;
__aligned_u64 jited_ksyms;
__aligned_u64 jited_func_lens;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
struct bpf_map_info { struct bpf_map_info {
...@@ -2060,6 +2386,15 @@ struct bpf_map_info { ...@@ -2060,6 +2386,15 @@ struct bpf_map_info {
__u32 ifindex; __u32 ifindex;
__u64 netns_dev; __u64 netns_dev;
__u64 netns_ino; __u64 netns_ino;
__u32 btf_id;
__u32 btf_key_type_id;
__u32 btf_value_type_id;
} __attribute__((aligned(8)));
struct bpf_btf_info {
__aligned_u64 btf;
__u32 btf_size;
__u32 id;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
...@@ -2080,6 +2415,12 @@ struct bpf_sock_addr { ...@@ -2080,6 +2415,12 @@ struct bpf_sock_addr {
__u32 family; /* Allows 4-byte read, but no write */ __u32 family; /* Allows 4-byte read, but no write */
__u32 type; /* Allows 4-byte read, but no write */ __u32 type; /* Allows 4-byte read, but no write */
__u32 protocol; /* Allows 4-byte read, but no write */ __u32 protocol; /* Allows 4-byte read, but no write */
__u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write.
* Stored in network byte order.
*/
__u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write.
* Stored in network byte order.
*/
}; };
/* User bpf_sock_ops struct to access socket values and specify request ops /* User bpf_sock_ops struct to access socket values and specify request ops
...@@ -2240,4 +2581,64 @@ struct bpf_raw_tracepoint_args { ...@@ -2240,4 +2581,64 @@ struct bpf_raw_tracepoint_args {
__u64 args[0]; __u64 args[0];
}; };
/* DIRECT: Skip the FIB rules and go to FIB table associated with device
* OUTPUT: Do lookup from egress perspective; default is ingress
*/
#define BPF_FIB_LOOKUP_DIRECT BIT(0)
#define BPF_FIB_LOOKUP_OUTPUT BIT(1)
struct bpf_fib_lookup {
/* input: network family for lookup (AF_INET, AF_INET6)
* output: network family of egress nexthop
*/
__u8 family;
/* set if lookup is to consider L4 data - e.g., FIB rules */
__u8 l4_protocol;
__be16 sport;
__be16 dport;
/* total length of packet from network header - used for MTU check */
__u16 tot_len;
__u32 ifindex; /* L3 device index for lookup */
union {
/* inputs to lookup */
__u8 tos; /* AF_INET */
__be32 flowlabel; /* AF_INET6 */
/* output: metric of fib result (IPv4/IPv6 only) */
__u32 rt_metric;
};
union {
__be32 ipv4_src;
__u32 ipv6_src[4]; /* in6_addr; network order */
};
/* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
* network header. output: bpf_fib_lookup sets to gateway address
* if FIB lookup returns gateway route
*/
union {
__be32 ipv4_dst;
__u32 ipv6_dst[4]; /* in6_addr; network order */
};
/* output */
__be16 h_vlan_proto;
__be16 h_vlan_TCI;
__u8 smac[6]; /* ETH_ALEN */
__u8 dmac[6]; /* ETH_ALEN */
};
enum bpf_task_fd_type {
BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
BPF_FD_TYPE_TRACEPOINT, /* tp name */
BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */
BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */
BPF_FD_TYPE_UPROBE, /* filename + offset */
BPF_FD_TYPE_URETPROBE, /* filename + offset */
};
#endif /* _UAPI__LINUX_BPF_H__ */ #endif /* _UAPI__LINUX_BPF_H__ */
...@@ -97,6 +97,8 @@ enum bpf_cmd { ...@@ -97,6 +97,8 @@ enum bpf_cmd {
BPF_PROG_QUERY, BPF_PROG_QUERY,
BPF_RAW_TRACEPOINT_OPEN, BPF_RAW_TRACEPOINT_OPEN,
BPF_BTF_LOAD, BPF_BTF_LOAD,
BPF_BTF_GET_FD_BY_ID,
BPF_TASK_FD_QUERY,
}; };
enum bpf_map_type { enum bpf_map_type {
...@@ -117,6 +119,8 @@ enum bpf_map_type { ...@@ -117,6 +119,8 @@ enum bpf_map_type {
BPF_MAP_TYPE_DEVMAP, BPF_MAP_TYPE_DEVMAP,
BPF_MAP_TYPE_SOCKMAP, BPF_MAP_TYPE_SOCKMAP,
BPF_MAP_TYPE_CPUMAP, BPF_MAP_TYPE_CPUMAP,
BPF_MAP_TYPE_XSKMAP,
BPF_MAP_TYPE_SOCKHASH,
}; };
enum bpf_prog_type { enum bpf_prog_type {
...@@ -139,6 +143,8 @@ enum bpf_prog_type { ...@@ -139,6 +143,8 @@ enum bpf_prog_type {
BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_SK_MSG,
BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_RAW_TRACEPOINT,
BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
BPF_PROG_TYPE_LWT_SEG6LOCAL,
BPF_PROG_TYPE_LIRC_MODE2,
}; };
enum bpf_attach_type { enum bpf_attach_type {
...@@ -156,6 +162,9 @@ enum bpf_attach_type { ...@@ -156,6 +162,9 @@ enum bpf_attach_type {
BPF_CGROUP_INET6_CONNECT, BPF_CGROUP_INET6_CONNECT,
BPF_CGROUP_INET4_POST_BIND, BPF_CGROUP_INET4_POST_BIND,
BPF_CGROUP_INET6_POST_BIND, BPF_CGROUP_INET6_POST_BIND,
BPF_CGROUP_UDP4_SENDMSG,
BPF_CGROUP_UDP6_SENDMSG,
BPF_LIRC_MODE2,
__MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
}; };
...@@ -282,8 +291,8 @@ union bpf_attr { ...@@ -282,8 +291,8 @@ union bpf_attr {
char map_name[BPF_OBJ_NAME_LEN]; char map_name[BPF_OBJ_NAME_LEN];
__u32 map_ifindex; /* ifindex of netdev to create on */ __u32 map_ifindex; /* ifindex of netdev to create on */
__u32 btf_fd; /* fd pointing to a BTF type data */ __u32 btf_fd; /* fd pointing to a BTF type data */
__u32 btf_key_id; /* BTF type_id of the key */ __u32 btf_key_type_id; /* BTF type_id of the key */
__u32 btf_value_id; /* BTF type_id of the value */ __u32 btf_value_type_id; /* BTF type_id of the value */
}; };
struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
...@@ -344,6 +353,7 @@ union bpf_attr { ...@@ -344,6 +353,7 @@ union bpf_attr {
__u32 start_id; __u32 start_id;
__u32 prog_id; __u32 prog_id;
__u32 map_id; __u32 map_id;
__u32 btf_id;
}; };
__u32 next_id; __u32 next_id;
__u32 open_flags; __u32 open_flags;
...@@ -376,6 +386,22 @@ union bpf_attr { ...@@ -376,6 +386,22 @@ union bpf_attr {
__u32 btf_log_size; __u32 btf_log_size;
__u32 btf_log_level; __u32 btf_log_level;
}; };
struct {
__u32 pid; /* input: pid */
__u32 fd; /* input: fd */
__u32 flags; /* input: flags */
__u32 buf_len; /* input/output: buf len */
__aligned_u64 buf; /* input/output:
* tp_name for tracepoint
* symbol for kprobe
* filename for uprobe
*/
__u32 prog_id; /* output: prod_id */
__u32 fd_type; /* output: BPF_FD_TYPE_* */
__u64 probe_offset; /* output: probe_offset */
__u64 probe_addr; /* output: probe_addr */
} task_fd_query;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
/* The description below is an attempt at providing documentation to eBPF /* The description below is an attempt at providing documentation to eBPF
...@@ -829,12 +855,12 @@ union bpf_attr { ...@@ -829,12 +855,12 @@ union bpf_attr {
* *
* Also, be aware that the newer helper * Also, be aware that the newer helper
* **bpf_perf_event_read_value**\ () is recommended over * **bpf_perf_event_read_value**\ () is recommended over
* **bpf_perf_event_read*\ () in general. The latter has some ABI * **bpf_perf_event_read**\ () in general. The latter has some ABI
* quirks where error and counter value are used as a return code * quirks where error and counter value are used as a return code
* (which is wrong to do since ranges may overlap). This issue is * (which is wrong to do since ranges may overlap). This issue is
* fixed with bpf_perf_event_read_value(), which at the same time * fixed with **bpf_perf_event_read_value**\ (), which at the same
* provides more features over the **bpf_perf_event_read**\ () * time provides more features over the **bpf_perf_event_read**\
* interface. Please refer to the description of * () interface. Please refer to the description of
* **bpf_perf_event_read_value**\ () for details. * **bpf_perf_event_read_value**\ () for details.
* Return * Return
* The value of the perf event counter read from the map, or a * The value of the perf event counter read from the map, or a
...@@ -987,7 +1013,6 @@ union bpf_attr { ...@@ -987,7 +1013,6 @@ union bpf_attr {
* :: * ::
* *
* # sysctl kernel.perf_event_max_stack=<new value> * # sysctl kernel.perf_event_max_stack=<new value>
*
* Return * Return
* The positive or null stack id on success, or a negative error * The positive or null stack id on success, or a negative error
* in case of failure. * in case of failure.
...@@ -1362,7 +1387,7 @@ union bpf_attr { ...@@ -1362,7 +1387,7 @@ union bpf_attr {
* Return * Return
* 0 * 0
* *
* int bpf_setsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen) * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
* Description * Description
* Emulate a call to **setsockopt()** on the socket associated to * Emulate a call to **setsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at * *bpf_socket*, which must be a full socket. The *level* at
...@@ -1436,7 +1461,7 @@ union bpf_attr { ...@@ -1436,7 +1461,7 @@ union bpf_attr {
* Return * Return
* **SK_PASS** on success, or **SK_DROP** on error. * **SK_PASS** on success, or **SK_DROP** on error.
* *
* int bpf_sock_map_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * int bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
* Description * Description
* Add an entry to, or update a *map* referencing sockets. The * Add an entry to, or update a *map* referencing sockets. The
* *skops* is used as a new value for the entry associated to * *skops* is used as a new value for the entry associated to
...@@ -1534,7 +1559,7 @@ union bpf_attr { ...@@ -1534,7 +1559,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_perf_prog_read_value(struct bpf_perf_event_data_kern *ctx, struct bpf_perf_event_value *buf, u32 buf_size) * int bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
* Description * Description
* For en eBPF program attached to a perf event, retrieve the * For en eBPF program attached to a perf event, retrieve the
* value of the event counter associated to *ctx* and store it in * value of the event counter associated to *ctx* and store it in
...@@ -1545,7 +1570,7 @@ union bpf_attr { ...@@ -1545,7 +1570,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_getsockopt(struct bpf_sock_ops_kern *bpf_socket, int level, int optname, char *optval, int optlen) * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
* Description * Description
* Emulate a call to **getsockopt()** on the socket associated to * Emulate a call to **getsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at * *bpf_socket*, which must be a full socket. The *level* at
...@@ -1589,7 +1614,7 @@ union bpf_attr { ...@@ -1589,7 +1614,7 @@ union bpf_attr {
* Return * Return
* 0 * 0
* *
* int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops_kern *bpf_sock, int argval) * int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval)
* Description * Description
* Attempt to set the value of the **bpf_sock_ops_cb_flags** field * Attempt to set the value of the **bpf_sock_ops_cb_flags** field
* for the full TCP socket associated to *bpf_sock_ops* to * for the full TCP socket associated to *bpf_sock_ops* to
...@@ -1722,7 +1747,7 @@ union bpf_attr { ...@@ -1722,7 +1747,7 @@ union bpf_attr {
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
* *
* int bpf_bind(struct bpf_sock_addr_kern *ctx, struct sockaddr *addr, int addr_len) * int bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len)
* Description * Description
* Bind the socket associated to *ctx* to the address pointed by * Bind the socket associated to *ctx* to the address pointed by
* *addr*, of length *addr_len*. This allows for making outgoing * *addr*, of length *addr_len*. This allows for making outgoing
...@@ -1768,6 +1793,268 @@ union bpf_attr { ...@@ -1768,6 +1793,268 @@ union bpf_attr {
* **CONFIG_XFRM** configuration option. * **CONFIG_XFRM** configuration option.
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
*
* int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags)
* Description
* Return a user or a kernel stack in bpf program provided buffer.
* To achieve this, the helper needs *ctx*, which is a pointer
* to the context on which the tracing program is executed.
* To store the stacktrace, the bpf program provides *buf* with
* a nonnegative *size*.
*
* The last argument, *flags*, holds the number of stack frames to
* skip (from 0 to 255), masked with
* **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
* the following flags:
*
* **BPF_F_USER_STACK**
* Collect a user space stack instead of a kernel stack.
* **BPF_F_USER_BUILD_ID**
* Collect buildid+offset instead of ips for user stack,
* only valid if **BPF_F_USER_STACK** is also specified.
*
* **bpf_get_stack**\ () can collect up to
* **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
* to sufficient large buffer size. Note that
* this limit can be controlled with the **sysctl** program, and
* that it should be manually increased in order to profile long
* user stacks (such as stacks for Java programs). To do so, use:
*
* ::
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
* A non-negative value equal to or less than *size* on success,
* or a negative error in case of failure.
*
* int skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
* This helper is similar to **bpf_skb_load_bytes**\ () in that
* it provides an easy way to load *len* bytes from *offset*
* from the packet associated to *skb*, into the buffer pointed
* by *to*. The difference to **bpf_skb_load_bytes**\ () is that
* a fifth argument *start_header* exists in order to select a
* base offset to start from. *start_header* can be one of:
*
* **BPF_HDR_START_MAC**
* Base offset to load data from is *skb*'s mac header.
* **BPF_HDR_START_NET**
* Base offset to load data from is *skb*'s network header.
*
* In general, "direct packet access" is the preferred method to
* access packet data, however, this helper is in particular useful
* in socket filters where *skb*\ **->data** does not always point
* to the start of the mac header and where "direct packet access"
* is not available.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
* Description
* Do FIB lookup in kernel tables using parameters in *params*.
* If lookup is successful and result shows packet is to be
* forwarded, the neighbor tables are searched for the nexthop.
* If successful (ie., FIB lookup shows forwarding and nexthop
* is resolved), the nexthop address is returned in ipv4_dst
* or ipv6_dst based on family, smac is set to mac address of
* egress device, dmac is set to nexthop mac address, rt_metric
* is set to metric from route (IPv4/IPv6 only).
*
* *plen* argument is the size of the passed in struct.
* *flags* argument can be a combination of one or more of the
* following values:
*
* **BPF_FIB_LOOKUP_DIRECT**
* Do a direct table lookup vs full lookup using FIB
* rules.
* **BPF_FIB_LOOKUP_OUTPUT**
* Perform lookup from an egress perspective (default is
* ingress).
*
* *ctx* is either **struct xdp_md** for XDP programs or
* **struct sk_buff** tc cls_act programs.
* Return
* Egress device index on success, 0 if packet needs to continue
* up the stack for further processing or a negative error in case
* of failure.
*
* int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
* Description
* Add an entry to, or update a sockhash *map* referencing sockets.
* The *skops* is used as a new value for the entry associated to
* *key*. *flags* is one of:
*
* **BPF_NOEXIST**
* The entry for *key* must not exist in the map.
* **BPF_EXIST**
* The entry for *key* must already exist in the map.
* **BPF_ANY**
* No condition on the existence of the entry for *key*.
*
* If the *map* has eBPF programs (parser and verdict), those will
* be inherited by the socket being added. If the socket is
* already attached to eBPF programs, this results in an error.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
* Description
* This helper is used in programs implementing policies at the
* socket level. If the message *msg* is allowed to pass (i.e. if
* the verdict eBPF program returns **SK_PASS**), redirect it to
* the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
* egress interfaces can be used for redirection. The
* **BPF_F_INGRESS** value in *flags* is used to make the
* distinction (ingress path is selected if the flag is present,
* egress path otherwise). This is the only flag supported for now.
* Return
* **SK_PASS** on success, or **SK_DROP** on error.
*
* int bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
* Description
* This helper is used in programs implementing policies at the
* skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
* if the verdeict eBPF program returns **SK_PASS**), redirect it
* to the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
* egress interfaces can be used for redirection. The
* **BPF_F_INGRESS** value in *flags* is used to make the
* distinction (ingress path is selected if the flag is present,
* egress otherwise). This is the only flag supported for now.
* Return
* **SK_PASS** on success, or **SK_DROP** on error.
*
* int bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
* Description
* Encapsulate the packet associated to *skb* within a Layer 3
* protocol header. This header is provided in the buffer at
* address *hdr*, with *len* its size in bytes. *type* indicates
* the protocol of the header and can be one of:
*
* **BPF_LWT_ENCAP_SEG6**
* IPv6 encapsulation with Segment Routing Header
* (**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
* the IPv6 header is computed by the kernel.
* **BPF_LWT_ENCAP_SEG6_INLINE**
* Only works if *skb* contains an IPv6 packet. Insert a
* Segment Routing Header (**struct ipv6_sr_hdr**) inside
* the IPv6 header.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len)
* Description
* Store *len* bytes from address *from* into the packet
* associated to *skb*, at *offset*. Only the flags, tag and TLVs
* inside the outermost IPv6 Segment Routing Header can be
* modified through this helper.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta)
* Description
* Adjust the size allocated to TLVs in the outermost IPv6
* Segment Routing Header contained in the packet associated to
* *skb*, at position *offset* by *delta* bytes. Only offsets
* after the segments are accepted. *delta* can be as well
* positive (growing) as negative (shrinking).
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len)
* Description
* Apply an IPv6 Segment Routing action of type *action* to the
* packet associated to *skb*. Each action takes a parameter
* contained at address *param*, and of length *param_len* bytes.
* *action* can be one of:
*
* **SEG6_LOCAL_ACTION_END_X**
* End.X action: Endpoint with Layer-3 cross-connect.
* Type of *param*: **struct in6_addr**.
* **SEG6_LOCAL_ACTION_END_T**
* End.T action: Endpoint with specific IPv6 table lookup.
* Type of *param*: **int**.
* **SEG6_LOCAL_ACTION_END_B6**
* End.B6 action: Endpoint bound to an SRv6 policy.
* Type of param: **struct ipv6_sr_hdr**.
* **SEG6_LOCAL_ACTION_END_B6_ENCAP**
* End.B6.Encap action: Endpoint bound to an SRv6
* encapsulation policy.
* Type of param: **struct ipv6_sr_hdr**.
*
* A call to this helper is susceptible to change the underlaying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
* performed again, if the helper is used in combination with
* direct packet access.
* Return
* 0 on success, or a negative error in case of failure.
*
* int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
* Description
* This helper is used in programs implementing IR decoding, to
* report a successfully decoded key press with *scancode*,
* *toggle* value in the given *protocol*. The scancode will be
* translated to a keycode using the rc keymap, and reported as
* an input key down event. After a period a key up event is
* generated. This period can be extended by calling either
* **bpf_rc_keydown** () again with the same values, or calling
* **bpf_rc_repeat** ().
*
* Some protocols include a toggle bit, in case the button was
* released and pressed again between consecutive scancodes.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
* The *protocol* is the decoded protocol number (see
* **enum rc_proto** for some predefined values).
*
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
*
* Return
* 0
*
* int bpf_rc_repeat(void *ctx)
* Description
* This helper is used in programs implementing IR decoding, to
* report a successfully decoded repeat key message. This delays
* the generation of a key up event for previously generated
* key down event.
*
* Some IR protocols like NEC have a special IR message for
* repeating last button, for when a button is held down.
*
* The *ctx* should point to the lirc sample as passed into
* the program.
*
* This helper is only available is the kernel was compiled with
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to
* "**y**".
*
* Return
* 0
*/ */
#define __BPF_FUNC_MAPPER(FN) \ #define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \ FN(unspec), \
...@@ -1836,7 +2123,19 @@ union bpf_attr { ...@@ -1836,7 +2123,19 @@ union bpf_attr {
FN(msg_pull_data), \ FN(msg_pull_data), \
FN(bind), \ FN(bind), \
FN(xdp_adjust_tail), \ FN(xdp_adjust_tail), \
FN(skb_get_xfrm_state), FN(skb_get_xfrm_state), \
FN(get_stack), \
FN(skb_load_bytes_relative), \
FN(fib_lookup), \
FN(sock_hash_update), \
FN(msg_redirect_hash), \
FN(sk_redirect_hash), \
FN(lwt_push_encap), \
FN(lwt_seg6_store_bytes), \
FN(lwt_seg6_adjust_srh), \
FN(lwt_seg6_action), \
FN(rc_repeat), \
FN(rc_keydown),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper /* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call * function eBPF program intends to call
...@@ -1870,11 +2169,14 @@ enum bpf_func_id { ...@@ -1870,11 +2169,14 @@ enum bpf_func_id {
/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
#define BPF_F_TUNINFO_IPV6 (1ULL << 0) #define BPF_F_TUNINFO_IPV6 (1ULL << 0)
/* BPF_FUNC_get_stackid flags. */ /* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */
#define BPF_F_SKIP_FIELD_MASK 0xffULL #define BPF_F_SKIP_FIELD_MASK 0xffULL
#define BPF_F_USER_STACK (1ULL << 8) #define BPF_F_USER_STACK (1ULL << 8)
/* flags used by BPF_FUNC_get_stackid only. */
#define BPF_F_FAST_STACK_CMP (1ULL << 9) #define BPF_F_FAST_STACK_CMP (1ULL << 9)
#define BPF_F_REUSE_STACKID (1ULL << 10) #define BPF_F_REUSE_STACKID (1ULL << 10)
/* flags used by BPF_FUNC_get_stack only. */
#define BPF_F_USER_BUILD_ID (1ULL << 11)
/* BPF_FUNC_skb_set_tunnel_key flags. */ /* BPF_FUNC_skb_set_tunnel_key flags. */
#define BPF_F_ZERO_CSUM_TX (1ULL << 1) #define BPF_F_ZERO_CSUM_TX (1ULL << 1)
...@@ -1894,6 +2196,18 @@ enum bpf_adj_room_mode { ...@@ -1894,6 +2196,18 @@ enum bpf_adj_room_mode {
BPF_ADJ_ROOM_NET, BPF_ADJ_ROOM_NET,
}; };
/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
enum bpf_hdr_start_off {
BPF_HDR_START_MAC,
BPF_HDR_START_NET,
};
/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
enum bpf_lwt_encap_mode {
BPF_LWT_ENCAP_SEG6,
BPF_LWT_ENCAP_SEG6_INLINE
};
/* user accessible mirror of in-kernel sk_buff. /* user accessible mirror of in-kernel sk_buff.
* new fields can only be added to the end of this structure * new fields can only be added to the end of this structure
*/ */
...@@ -2027,6 +2341,14 @@ enum sk_action { ...@@ -2027,6 +2341,14 @@ enum sk_action {
struct sk_msg_md { struct sk_msg_md {
void *data; void *data;
void *data_end; void *data_end;
__u32 family;
__u32 remote_ip4; /* Stored in network byte order */
__u32 local_ip4; /* Stored in network byte order */
__u32 remote_ip6[4]; /* Stored in network byte order */
__u32 local_ip6[4]; /* Stored in network byte order */
__u32 remote_port; /* Stored in network byte order */
__u32 local_port; /* stored in host byte order */
}; };
#define BPF_TAG_SIZE 8 #define BPF_TAG_SIZE 8
...@@ -2048,6 +2370,10 @@ struct bpf_prog_info { ...@@ -2048,6 +2370,10 @@ struct bpf_prog_info {
__u32 gpl_compatible:1; __u32 gpl_compatible:1;
__u64 netns_dev; __u64 netns_dev;
__u64 netns_ino; __u64 netns_ino;
__u32 nr_jited_ksyms;
__u32 nr_jited_func_lens;
__aligned_u64 jited_ksyms;
__aligned_u64 jited_func_lens;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
struct bpf_map_info { struct bpf_map_info {
...@@ -2061,6 +2387,15 @@ struct bpf_map_info { ...@@ -2061,6 +2387,15 @@ struct bpf_map_info {
__u32 ifindex; __u32 ifindex;
__u64 netns_dev; __u64 netns_dev;
__u64 netns_ino; __u64 netns_ino;
__u32 btf_id;
__u32 btf_key_type_id;
__u32 btf_value_type_id;
} __attribute__((aligned(8)));
struct bpf_btf_info {
__aligned_u64 btf;
__u32 btf_size;
__u32 id;
} __attribute__((aligned(8))); } __attribute__((aligned(8)));
/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
...@@ -2081,6 +2416,12 @@ struct bpf_sock_addr { ...@@ -2081,6 +2416,12 @@ struct bpf_sock_addr {
__u32 family; /* Allows 4-byte read, but no write */ __u32 family; /* Allows 4-byte read, but no write */
__u32 type; /* Allows 4-byte read, but no write */ __u32 type; /* Allows 4-byte read, but no write */
__u32 protocol; /* Allows 4-byte read, but no write */ __u32 protocol; /* Allows 4-byte read, but no write */
__u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write.
* Stored in network byte order.
*/
__u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write.
* Stored in network byte order.
*/
}; };
/* User bpf_sock_ops struct to access socket values and specify request ops /* User bpf_sock_ops struct to access socket values and specify request ops
...@@ -2241,5 +2582,65 @@ struct bpf_raw_tracepoint_args { ...@@ -2241,5 +2582,65 @@ struct bpf_raw_tracepoint_args {
__u64 args[0]; __u64 args[0];
}; };
/* DIRECT: Skip the FIB rules and go to FIB table associated with device
* OUTPUT: Do lookup from egress perspective; default is ingress
*/
#define BPF_FIB_LOOKUP_DIRECT BIT(0)
#define BPF_FIB_LOOKUP_OUTPUT BIT(1)
struct bpf_fib_lookup {
/* input: network family for lookup (AF_INET, AF_INET6)
* output: network family of egress nexthop
*/
__u8 family;
/* set if lookup is to consider L4 data - e.g., FIB rules */
__u8 l4_protocol;
__be16 sport;
__be16 dport;
/* total length of packet from network header - used for MTU check */
__u16 tot_len;
__u32 ifindex; /* L3 device index for lookup */
union {
/* inputs to lookup */
__u8 tos; /* AF_INET */
__be32 flowlabel; /* AF_INET6 */
/* output: metric of fib result (IPv4/IPv6 only) */
__u32 rt_metric;
};
union {
__be32 ipv4_src;
__u32 ipv6_src[4]; /* in6_addr; network order */
};
/* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
* network header. output: bpf_fib_lookup sets to gateway address
* if FIB lookup returns gateway route
*/
union {
__be32 ipv4_dst;
__u32 ipv6_dst[4]; /* in6_addr; network order */
};
/* output */
__be16 h_vlan_proto;
__be16 h_vlan_TCI;
__u8 smac[6]; /* ETH_ALEN */
__u8 dmac[6]; /* ETH_ALEN */
};
enum bpf_task_fd_type {
BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
BPF_FD_TYPE_TRACEPOINT, /* tp name */
BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */
BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */
BPF_FD_TYPE_UPROBE, /* filename + offset */
BPF_FD_TYPE_URETPROBE, /* filename + offset */
};
#endif /* _UAPI__LINUX_BPF_H__ */ #endif /* _UAPI__LINUX_BPF_H__ */
)********" )********"
...@@ -356,6 +356,30 @@ static int (*bpf_xdp_adjust_tail)(void *ctx, int offset) = ...@@ -356,6 +356,30 @@ static int (*bpf_xdp_adjust_tail)(void *ctx, int offset) =
(void *) BPF_FUNC_xdp_adjust_tail; (void *) BPF_FUNC_xdp_adjust_tail;
static int (*bpf_skb_get_xfrm_state)(void *ctx, u32 index, void *xfrm_state, u32 size, u64 flags) = static int (*bpf_skb_get_xfrm_state)(void *ctx, u32 index, void *xfrm_state, u32 size, u64 flags) =
(void *) BPF_FUNC_skb_get_xfrm_state; (void *) BPF_FUNC_skb_get_xfrm_state;
static int (*bpf_get_stack)(void *ctx, void *buf, u32 size, u64 flags) =
(void *) BPF_FUNC_get_stack;
static int (*bpf_skb_load_bytes_relative)(void *ctx, u32 offset, void *to, u32 len, u32 start_header) =
(void *) BPF_FUNC_skb_load_bytes_relative;
static int (*bpf_fib_lookup)(void *ctx, void *params, int plen, u32 flags) =
(void *) BPF_FUNC_fib_lookup;
static int (*bpf_sock_hash_update)(void *ctx, void *map, void *key, u64 flags) =
(void *) BPF_FUNC_sock_hash_update;
static int (*bpf_msg_redirect_hash)(void *ctx, void *map, void *key, u64 flags) =
(void *) BPF_FUNC_msg_redirect_hash;
static int (*bpf_sk_redirect_hash)(void *ctx, void *map, void *key, u64 flags) =
(void *) BPF_FUNC_sk_redirect_hash;
static int (*bpf_lwt_push_encap)(void *skb, u32 type, void *hdr, u32 len) =
(void *) BPF_FUNC_lwt_push_encap;
static int (*bpf_lwt_seg6_store_bytes)(void *ctx, u32 offset, const void *from, u32 len) =
(void *) BPF_FUNC_lwt_seg6_store_bytes;
static int (*bpf_lwt_seg6_adjust_srh)(void *ctx, u32 offset, s32 delta) =
(void *) BPF_FUNC_lwt_seg6_adjust_srh;
static int (*bpf_lwt_seg6_action)(void *ctx, u32 action, void *param, u32 param_len) =
(void *) BPF_FUNC_lwt_seg6_action;
static int (*bpf_rc_keydown)(void *ctx, u32 protocol, u64 scancode, u32 toggle) =
(void *) BPF_FUNC_rc_keydown;
static int (*bpf_rc_repeat)(void *ctx) =
(void *) BPF_FUNC_rc_repeat;
/* llvm builtin functions that eBPF C program may use to /* llvm builtin functions that eBPF C program may use to
* emit BPF_LD_ABS and BPF_LD_IND instructions * emit BPF_LD_ABS and BPF_LD_IND instructions
......
...@@ -156,6 +156,18 @@ static struct bpf_helper helpers[] = { ...@@ -156,6 +156,18 @@ static struct bpf_helper helpers[] = {
{"bind", "4.17"}, {"bind", "4.17"},
{"xdp_adjust_tail", "4.18"}, {"xdp_adjust_tail", "4.18"},
{"skb_get_xfrm_state", "4.18"}, {"skb_get_xfrm_state", "4.18"},
{"get_stack", "4.18"},
{"skb_load_bytes_relative", "4.18"},
{"fib_lookup", "4.18"},
{"sock_hash_update", "4.18"},
{"msg_redirect_hash", "4.18"},
{"sk_redirect_hash", "4.18"},
{"lwt_push_encap", "4.18"},
{"lwt_seg6_store_bytes", "4.18"},
{"lwt_seg6_adjust_srh", "4.18"},
{"lwt_seg6_action", "4.18"},
{"rc_repeat", "4.18"},
{"rc_keydown", "4.18"},
}; };
static uint64_t ptr_to_u64(void *ptr) static uint64_t ptr_to_u64(void *ptr)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment