This way, if backup repository was freshly repacked with bitmap index
generation turned on, we can get ~ 30% - 50% speedup for a typical
erp5.git pack extraction.

"--use-bitmap-index" option was added to git in v2.0, but was only
active for to-stdout packs generation. It was enabled for to-file packs
generation in git v2.11.

Since git v2.0 was released in 2014 - 4 years ago - I'm not adding
runtime detection of "--use-bitmap-index" availability.

See https://git.kernel.org/pub/scm/git/git.git/commit/?h=645c432d61 for
details.

- remove blank line between main description and package clause, so that
  the main description is understood as such;
- move notes describing what a file does after package clause, so that
  those notes do not get mixed into program description under godoc.

add option to remove or keep pulled backup data

[ kirr: The .pulled files with gitlab backup data (SQL and the like)
  were originally not removed "just in case" in the early days of
  git/gitlab-backup. They are clearly not needed to be kept since their
  content is entered into git backup database by gitlab-backup, and
  leaving those .pulled files just wastes disk space.

  So default to not keep them around and for now add an option to
  forcibly preserve the raw gitlab backup if we'll need it just in case or
  for the debugging.

  However if it turns out we won't really need -keep in practice, it
  might go away in some time. ]

/reviewed-on kirr/git-backup!3

If a repository is removed when git-backup is running, print a warning
message and continue pulling instead of exiting with error.

/reviewed-on !2

Relicense to GPLv3+ with wide exception for all Free Software / Open Source projects + Business options.

Nexedi stack is licensed under Free Software licenses with various exceptions
that cover three business cases:

- Free Software
- Proprietary Software
- Rebranding

As long as one intends to develop Free Software based on Nexedi stack, no
license cost is involved. Developing proprietary software based on Nexedi stack
may require a proprietary exception license. Rebranding Nexedi stack is
prohibited unless rebranding license is acquired.

Through this licensing approach, Nexedi expects to encourage Free Software
development without restrictions and at the same time create a framework for
proprietary software to contribute to the long term sustainability of the
Nexedi stack.

Please see https://www.nexedi.com/licensing for details, rationale and options.

- myname moved -> my
  go123@98249b24

- Traceback now returns []runtime.Frame
  go123@7deb28a5

to

	xflag.Count

	xstrings.SplitLines
	xstrings.Split2
	xstrings.HeadTail

Other string-related routines stay in git-backup for now as I don't
feel they are general enough or interface chosen is really ok.

It is now

	mem.String(),	and
	mem.Bytes()

error.go is completely being moved to that shared place for handy Go
utilities into several subpackages:

	lab.nexedi.com/kirr/go123/exc		-- exception-style error handling for Go
	lab.nexedi.com/kirr/go123/myname	-- easy way to determine current function's name and package
	lab.nexedi.com/kirr/go123/xerr		-- addons for error-handling
	lab.nexedi.com/kirr/go123/xruntime	-- addons to standard package runtime

By definition of strings.Split(..., sep) it "slices s into all substrings
separated by sep and returns a slice of the substrings between those
separators". That means that

    string.Split("hello\nworld\n", "\n") -> ["hello", "world", ""])     # NOTE the last ""

when parsing file by lines, it is handy though to do not get last empty
"" after last "\n". #6 shows how we missed to do that filtering-out for
case of empty backup.refs file and errored-out because of that.

To fix let's introduce a helper - splitlines(), which does the job of
filtering-out last empty entry after last separator. By using this
helper everywhere we can hopefully avoid problems while pulling only
empty repositories (#6 case), and also similar ones.

Fixes #6
/reported-by @iv

Continuing 62374038 (pull: Turns unused refs are removed not 100% and a
lot of empty directories are accumulated) we just make sure to remove
them in the end of pull.

But NOTE: there could be O(n^2) behaviour still hidden, so it makes
sense to eventually revisit it and cleanup empty dirs earlier.

For now we just care not to degrade future pull performance. The
appropriate time for revisiting could be when reworking pull to do
fetches in parallel.

Updates: https://lab.nexedi.com/lab.nexedi.com/lab.nexedi.com/issues/4

This way it allows us to leverage multiple CPUs on a system for pack
extractions, which are computation-heavy operations.

The way to do is more-or-less classical:

    - main worker prepares requests for pack extraction jobs

    - there are multiple pack-extraction workers, which read requests
      from jobs queue and perform them

    - at the end we wait for everything to stop, collect errors and
      optionally signalling the whole thing to cancel if we see an error
      coming. (it is only a signal and we still have to wait for
      everything to stop)

The default number of workers is N(CPU) on the system - because we spawn
separate `git pack-objects ...` for every request.

We also now explicitly limit N(CPU) each `git pack-objects ...` can use
to 1. This way control how many resources to use is in git-backup hand
and also git packs better this way (when only using 1 thread) because
when deltifying all objects are considered to each other, not only all
objects inside 1 thread's object poll, and even when pack.threads is not
1, first "objects counting" phase of pack is serial - wasting all but 1
core.

On lab.nexedi.com we already use pack.threads=1 by default in global
gitconfig, but the above change is for code to be universal.

Time to restore nexedi/ from lab.nexedi.com backup:

2CPU laptop:

    before (pack.threads=1)     10m11s
    before (pack.threads=NCPU)   9m13s
    after  -j1                  10m11s
    after                        6m17s

8CPU system (with other load present, noisy) :

    before (pack.threads=1)     ~5m
    after                       ~1m30s

like in 302aaaea (raiseif: Fix it wrt erraddcallingcontext()) now fix
raisef, which I originally overlooked.

Because spawning separate process per 1 commit is slow.

Libgit2 does not allow to create commits only knowing tree & parentv
sha1s, but we can create commit objects by hand pretty easily - their format is

    tree <sha1>
    parent <parent1-sha1>
    parent <parent2-sha1>
    ...
    author user <email> date +offset
    committer user <email> date +offset
    LF
    message

Time for pulling-in kirr/slapos.git

before: 2.5s
after:  0.9s

NOTE AuthorInfo is changed to inherit from git.Signature (same fields
    and semantic)

NOTE Since libgit2 default ident can fail, and does not look beyond
    user.name and user.email we do backup identity detection
    (user/hostname) - in similar way Git does - ourselves.

We are going to rework this function, but before adding changes let's
move it to more appropriate place. Since xcommit_tree() creates commit
object from tree and parents and is pretty standard git function - the
appropriate place is gitobjects.

NOTE we cannot just replace xcommit_tree() with g.CreateCommit() as the
    latter works with already loaded tree and parent objects, but we
    want to be able to make commits only knowing tree and parents sha1.

In upcoming patch we are going to switch xcommit_tree() to our own
implementation, and since this can potentially change how commits are
represented, for backward compatibility reason we need to make sure
objects encoded as commits stay the same.

So for all kind of objects (they are present in testdata/ repositories)
add checks that:

    - encode/decode is idempotent
    - encoding and decoding produces exactly expected sha1

One nice side effect of this is that we can now remove runtime
consistency check from tail of decoding. That check was there from the
beginning - from 6f237f22 (git-backup: Initial draft) mainly present
because there was no testsuite at that time. That check place is however
even not completely right - in case we somehow wrongly pulled an object
it has to be detected at pull time, not restore time. So that check was
checking only 1/2 of implementation - and not the main one - that
decoding does not mess up.

Since now we have proper testsuite and add encode/decode tests in this
patch, we can remove that partial runtime check. And even if decoding
messes something up, despite having it testsuited, it will be 100%
caught by restore process, because for an extracted repository, if
there is no some object which needs to be present in it, pack generation
for that repository will fail. So we can be safe with the removal.

Time for restoring kirr/slapos.git from lab.nexedi.com backup

before: 5.5s
after:  3.5s

( so much because there are ~ 500 tags in slapos.git and currently tag
  encoding is done with spawning separate subprocess per tag )

Do not waste resources adding every file converted to blob with spawning
`git update-index ...` per file - we can queue the info and add all
entries to index in one go.

Time to pull files part for lab.nexedi.com

before: ~110s
after:    ~3s

Time for restoring kirr/slapos.git from lab.nexedi.com backup

before: 7.4s
after:  5.6s

We can reuse ReadObject() like for blob_to_file().

We cannot drop xload_tag() in favor of Repository.LookupTag() because
upon tag loading we need to have not only parsed tag, but also its raw
content for encoding in another object.

Time for restoring kirr/slapos.git from lab.nexedi.com backup

before: 8.9s
after:  7.4s

( it goes down because on restore restored tags are reencoded again to
  verify restoration was ok. Pulling time should go down appropriately
  as well )

Substituting `git cat-file` to Odb.Read() and `git hash-object -w` to
Odb.Write().

Timing for restoring only files from lab.nexedi.com backup:

before: ~95s
after:   ~8s

Timings for making backup in file part should have similar effect.

This saves us one `git cat-file` call per recreated tag.

Time for restoring kirr/slapos.git from lab.nexedi.com backup

before: 10.3s
after:   8.9s

Currently for every file -> blob, and blob -> file we invoke git
subprocess (cat-file or hash-object). We also invoke git subprocess for
every tag read/write and the same for commits and this 1-subprocess per
1 object has very high overhead.

The ways to avoid such overhead could be:

1) for every kind of operation spawn git service process, like e.g.
   `git cat-file --batch` for reading files, and only do request/reply
   per object with it.

2) use some go library to work with git repository ourselves.

"1" can work but:

    - at present there is no counterpart of `cat-file --batch` for
      e.g. `hash-object` - i.e. we cannot write objects without quirks
      or patching git.

    - even if we add support for hashing via request/reply, as all
      requests are processed sequentially on git side by e.g. `git
      cat-file --batch`, we won't be able to leverage parallelism.

    - request/reply has also latency attached.

For "2" we have roughly the following choices:

    - use cgo bindings to libgit2   (git2go)

    - use some pure-go git library

Pure-go approach has pros that it by design avoids problems related to
tricky CGo pointer C <-> Go passing rules. The fact that this was sorted
out by go team itself only during 1.6 cycle

    https://github.com/golang/go/issues/12416

tells a lot. The net is full of examples where those were hard to get,
and git2go in particular has a story of e.g. heap corruption (the bug
was on golang itself side and fixed only for 1.5)

    https://github.com/libgit2/git2go/issues/223
    https://groups.google.com/forum/#!topic/golang-nuts/Vi1HD-54BTA/discussion

However there is no good (to my knowledge) pure-go git library, and the
family of forks around github.com/speedata/gogit either:

    - works 3x slower compared to git2go

      ( or the same 3x in serial mode compared to e.g. `git cat-file --batch`
        as in serial mode git subservice and git2go has roughly similar performance )

    - or does not work at all (e.g. barfing out on REF_DELTA pack
      entries, etc)

So because of 3x slowdown, pure-go way is currently a no-runner.

Since one person from golang team cared to update git2go to properly
follow the CGo rules

    https://github.com/libgit2/git2go/pull/282

we can be relatively confident about git2go bindings quality and try to
use it.

This commit only hooks git2go into the build, subcommands and to Sha1
for to/from Oid conversion. We'll be switching places to git2go
incrementally in upcoming patches.

NOTE for now we need git2go from next branch for

    https://github.com/libgit2/git2go/commit/cf7553e7

The plan is to eventually switch to

    gopkg.in/libgit2/git2go.v25

once it is out.

We are going to use git2go (see next patch) for which canonical import
path is git (import "github.com/libgit2/git2go" results in package name
being autotruncated to just "git") so free up the "git" name for that
package.

Reason is: git() - as function - is used not often, while the package
will be used often.

Regarding naming: not sure it is good choice but ggit() is something
like xgit(), only g is for "GitError".

We can do similar to what git does for blobs - searching in a window of
repositories sorted by repo basename.

In 28986e0e (Rewrite in Go) I've added mypkgname() with comment that go
escapes all '.' in function name with %2e. That turned out to be not
true: Go escapes only dots in last component after last slash, e.g.

    lab.nexedi.com/kirr/git-backup/package%2ename.Function
    lab.nexedi.com/kirr/git-backup/pkg2.qqq/name%2ezzz.Function

Correct mypkgname() accordingly.

Noted while trying to run git-backup in a GOPATH root, not as
standalone.

erraddcallingcontext() already tries not to go beyond raise, but since
raiseif wes calling raise, it was omitting raiseif but not raise itself.
So an error could be like this

    cmd_restore: raiseif: mkdir ../R/1: file exists

while it should be

    cmd_restore: mkdir ../R/1: file exists

Fix it.

when/if we ever get to need them.

It was a default leftover to autodetect object type if obj_type=None,
from the beginning - from bbee44ce (Start of git-backup.git) - because
even there obj_represent_as_commit() is always called with obj_type
explicitly passed in.

So remove the leftover.

This is more-or-less 1-to-1 port of git-backup to Go. There are things
we handle a bit differently:

- there is a separate type for Sha1
- conversion of repo paths to git references is now more robust wrt
  avoiding not-allowed in git constructs like ".." or ".lock"

  https://git.kernel.org/cgit/git/git.git/tree/refs.c?h=v2.9.0-37-g6d523a3#n34

The rewrite happened because we need to optimize restore, and for e.g.
parallelizing part it should be convenient to use goroutines and channels.

I'm not very comfortable with how error handling is done, because
contrary to what canonical Go way seems to be, in a lot of places it still
looks to me exceptions are better idea compared to just error codes,
though in many places just error codes are better and makes more sense.
Probably there will be less exceptions over time once the code starts to
be collaborating set of goroutines with communications done via
channels.

Still a lot of python habits on my side.

And as a bonus we now have end-to-end pull/restore tests...

Bug present since the beginning: 6f237f22 (git-backup: Initial draft).

Even though we delete all temporary refs after pull, git leaves empty
directories in the place where the refs were - for example if there was
a ref

    dir/ref

and we delete ref `ref`, empty dir/ is still leaved there.

That increasingly hurts next pull performance a lot - before pulling git
wants to scan all local refs, and while doing so it descends into all
directories under refs/.

As after several pulls we can have many such empty directories under
refs/backup/, this scanning can take quite some time: e.g. for
lab.nexedi.com normal pull currently takes ~3 minutes, but after doing
pull ~60 times, it can become as bad as ~10 minutes for one pull. And
all that slowness goes away after cleaning refs/backup/ manually.

/cc https://lab.nexedi.com/lab.nexedi.com/lab.nexedi.com/issues/4

Same story as in e.g.

    kirr/wendelin.core@b0b2c52e

( in short: GitLab now prepends namespace/repo/blob/ref/ prefix by
  itself )

No need to compute that twice. My mistake from original 6f237f22
(git-backup: Initial draft).

README.txt was renamed -> README.rst in a695bdbe (readme: .txt -> .rst)

Add a short introduction which outlines what gitlab-backup program does.

Following up on 48062989 (gitlab-backup/restore: Gitlab wants uploads/
to be 0750 and dirs inside uploads/ to be 0755):

Starting from 8.5:

    https://gitlab.com/gitlab-org/gitlab-ce/commit/4f946f03

GitLab wants uploads/ to be 0700 and dirs inside uploads/ to be 0700
too.

ln has several syntaxes. man ln 1 ln:

   SYNOPSIS
          ln [OPTION]... [-T] TARGET LINK_NAME   (1st form)
          ln [OPTION]... TARGET                  (2nd form)
          ln [OPTION]... TARGET... DIRECTORY     (3rd form)
          ln [OPTION]... -t DIRECTORY TARGET...  (4th form)

so without -T or -t what is target and what is link name is ambiguous and
ln tries to guess. Now imagine:

    ln -sf /path/to/new/hook    $H

and let us consider that $H is already a symlink, pointing to some place
which _exists_, but current user do not have access to. Then ln will
complain:

    ln: accessing `$H': Permission denied

and abort.

Fix it by specifying ln form we use explicitly with -T.

On restore we were initializing refs/ and objects/ for repositories
obtained from backuped refs set, but this approach does not cover empty
repositories - e.g. repositories without any ref at all.

A frequent case for this is *.wiki.git in gitlab, and if we restore only
files for such repo, without empty refs/ and objects/ it would look like
restored ok, but any git-related operation on such repo will fail.

Fix it via making sure to create refs/ and objects/ the first time we
see a *.git while restoring files.

/cc @kazuhiko