iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger

The main intent here is to get rid of the iio_buffer_set_attrs() helper, or
at least rework it's usage a bit.
The problem with that helper is that it needs a pointer to the buffer,
which makes supporting multiple buffers per IIO device a bit more
cumbersome.

The hid_sensor_setup_trigger() is pretty much used in the same way:
- iio_triggered_buffer_setup() gets called before
- then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets
  called which may attach some fifo attributes

This change merges the 2 together under the hid_sensor_setup_trigger()
function. Only the &iio_pollfunc_store_time is passed to all devices, so
it's not even required to pass it explicitly outside of the common
hid_sensor_setup_trigger() function.

Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common
place code can help the rework of the buffer code, since it is in one
place.

One detail of the change is that there are 2 drivers that use
devm_iio_triggered_buffer_setup(). That function gets implicitly
replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers
call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger,
the iio_triggered_buffer_cleanup() piggy backs on the
hid_sensor_remove_trigger() call, which should cover the cleanup.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/hid-sensor-accel-3d.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 enum accel_3d_channel {
@@ -391,18 +389,13 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&accel_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 					&accel_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -426,9 +419,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&accel_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &accel_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -443,8 +434,7 @@ static int hid_accel_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, hsdev->usage);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&accel_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &accel_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/common/hid-sensors/hid-sensor-trigger.c

@@ -13,6 +13,8 @@
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/sysfs.h>
 #include "hid-sensor-trigger.h"
@@ -222,7 +224,8 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 	return hid_sensor_power_state(iio_trigger_get_drvdata(trig), state);
 }
 
-void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
+			       struct hid_sensor_common *attrb)
 {
 	if (atomic_read(&attrb->runtime_pm_enable))
 		pm_runtime_disable(&attrb->pdev->dev);
@@ -233,6 +236,7 @@ void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 	cancel_work_sync(&attrb->work);
 	iio_trigger_unregister(attrb->trigger);
 	iio_trigger_free(attrb->trigger);
+	iio_triggered_buffer_cleanup(indio_dev);
 }
 EXPORT_SYMBOL(hid_sensor_remove_trigger);
 
@@ -246,11 +250,18 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 	int ret;
 	struct iio_trigger *trig;
 
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+					 NULL, NULL);
+	if (ret) {
+		dev_err(&indio_dev->dev, "Triggered Buffer Setup Failed\n");
+		return ret;
+	}
+
 	trig = iio_trigger_alloc("%s-dev%d", name, indio_dev->id);
 	if (trig == NULL) {
 		dev_err(&indio_dev->dev, "Trigger Allocate Failed\n");
 		ret = -ENOMEM;
-		goto error_ret;
+		goto error_triggered_buffer_cleanup;
 	}
 
 	trig->dev.parent = indio_dev->dev.parent;
@@ -284,7 +295,8 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 	iio_trigger_unregister(trig);
 error_free_trig:
 	iio_trigger_free(trig);
-error_ret:
+error_triggered_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
 	return ret;
 }
 EXPORT_SYMBOL(hid_sensor_setup_trigger);

drivers/iio/common/hid-sensors/hid-sensor-trigger.h

@@ -13,7 +13,8 @@ extern const struct dev_pm_ops hid_sensor_pm_ops;
 
 int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 				struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
+			       struct hid_sensor_common *attrb);
 int hid_sensor_power_state(struct hid_sensor_common *st, bool state);
 
 #endif

drivers/iio/gyro/hid-sensor-gyro-3d.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 enum gyro_3d_channel {
@@ -326,18 +324,13 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&gyro_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 					&gyro_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -361,9 +354,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&gyro_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -378,8 +369,7 @@ static int hid_gyro_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&gyro_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/humidity/hid-sensor-humidity.c

@@ -7,8 +7,6 @@
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/triggered_buffer.h>
-#include <linux/iio/trigger_consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
@@ -233,12 +231,8 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev,
-					&iio_pollfunc_store_time, NULL, NULL);
-	if (ret)
-		return ret;
-
 	atomic_set(&humid_st->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 				&humid_st->common_attributes);
 	if (ret)
@@ -261,7 +255,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 error_remove_callback:
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&humid_st->common_attributes);
+	hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
 	return ret;
 }
 
@@ -274,7 +268,7 @@ static int hid_humidity_remove(struct platform_device *pdev)
 
 	iio_device_unregister(indio_dev);
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
-	hid_sensor_remove_trigger(&humid_st->common_attributes);
+	hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
 
 	return 0;
 }

drivers/iio/light/hid-sensor-als.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 enum {
@@ -308,18 +306,13 @@ static int hid_als_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&als_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 				&als_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -343,9 +336,7 @@ static int hid_als_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&als_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -360,8 +351,7 @@ static int hid_als_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&als_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/light/hid-sensor-prox.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 #define CHANNEL_SCAN_INDEX_PRESENCE 0
@@ -286,18 +284,13 @@ static int hid_prox_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&prox_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 				&prox_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -321,9 +314,7 @@ static int hid_prox_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&prox_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -338,8 +329,7 @@ static int hid_prox_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PROX);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&prox_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/magnetometer/hid-sensor-magn-3d.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 enum magn_3d_channel {
@@ -519,18 +517,13 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		return ret;
-	}
 	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 					&magn_state->magn_flux_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		return ret;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -554,9 +547,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
 	return ret;
 }
 
@@ -569,8 +560,7 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
 
 	return 0;
 }

drivers/iio/orientation/hid-sensor-incl-3d.c

@@ -15,8 +15,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 enum incl_3d_channel {
@@ -346,18 +344,13 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&incl_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 					&incl_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -382,9 +375,7 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&incl_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -399,8 +390,7 @@ static int hid_incl_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&incl_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/orientation/hid-sensor-rotation.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 struct dev_rot_state {
@@ -288,18 +286,13 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		return ret;
-	}
 	atomic_set(&rot_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 					&rot_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		return ret;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -323,9 +316,7 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&rot_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes);
 	return ret;
 }
 
@@ -338,8 +329,7 @@ static int hid_dev_rot_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, hsdev->usage);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&rot_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes);
 
 	return 0;
 }

drivers/iio/pressure/hid-sensor-press.c

@@ -14,8 +14,6 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
 #include "../common/hid-sensors/hid-sensor-trigger.h"
 
 #define CHANNEL_SCAN_INDEX_PRESSURE 0
@@ -290,18 +288,13 @@ static int hid_press_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
-		NULL, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
-		goto error_free_dev_mem;
-	}
 	atomic_set(&press_state->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 				&press_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
-		goto error_unreg_buffer_funcs;
+		goto error_free_dev_mem;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -325,9 +318,7 @@ static int hid_press_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&press_state->common_attributes);
-error_unreg_buffer_funcs:
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &press_state->common_attributes);
 error_free_dev_mem:
 	kfree(indio_dev->channels);
 	return ret;
@@ -342,8 +333,7 @@ static int hid_press_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&press_state->common_attributes);
-	iio_triggered_buffer_cleanup(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &press_state->common_attributes);
 	kfree(indio_dev->channels);
 
 	return 0;

drivers/iio/temperature/hid-sensor-temperature.c

@@ -7,8 +7,6 @@
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/triggered_buffer.h>
-#include <linux/iio/trigger_consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
@@ -230,12 +228,8 @@ static int hid_temperature_probe(struct platform_device *pdev)
 	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev,
-					&iio_pollfunc_store_time, NULL, NULL);
-	if (ret)
-		return ret;
-
 	atomic_set(&temp_st->common_attributes.data_ready, 0);
+
 	ret = hid_sensor_setup_trigger(indio_dev, name,
 				&temp_st->common_attributes);
 	if (ret)
@@ -258,7 +252,7 @@ static int hid_temperature_probe(struct platform_device *pdev)
 error_remove_callback:
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&temp_st->common_attributes);
+	hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes);
 	return ret;
 }
 
@@ -270,7 +264,7 @@ static int hid_temperature_remove(struct platform_device *pdev)
 	struct temperature_state *temp_st = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE);
-	hid_sensor_remove_trigger(&temp_st->common_attributes);
+	hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes);
 
 	return 0;
 }