Commit 0f010171 authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Greg Kroah-Hartman

usb: dwc3: Don't switch OTG -> peripheral if extcon is present

If the extcon device exists, get the mode from the extcon device. If
the controller is DRD and the driver is unable to determine the mode,
only then default the dr_mode to USB_DR_MODE_PERIPHERAL.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: default avatarThinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Link: https://lore.kernel.org/r/20220403164907.662860-1-andrew.smirnov@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5c29e864
......@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
#include <linux/reset.h>
......@@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
* mode. If the controller supports DRD but the dr_mode is not
* specified or set to OTG, then set the mode to peripheral.
*/
if (mode == USB_DR_MODE_OTG &&
if (mode == USB_DR_MODE_OTG && !dwc->edev &&
(!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
!device_property_read_bool(dwc->dev, "usb-role-switch")) &&
!DWC3_VER_IS_PRIOR(DWC3, 330A))
......@@ -1631,6 +1632,51 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
}
static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *np_phy;
struct extcon_dev *edev = NULL;
const char *name;
if (device_property_read_bool(dev, "extcon"))
return extcon_get_edev_by_phandle(dev, 0);
/*
* Device tree platforms should get extcon via phandle.
* On ACPI platforms, we get the name from a device property.
* This device property is for kernel internal use only and
* is expected to be set by the glue code.
*/
if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
edev = extcon_get_extcon_dev(name);
if (!edev)
return ERR_PTR(-EPROBE_DEFER);
return edev;
}
/*
* Try to get an extcon device from the USB PHY controller's "port"
* node. Check if it has the "port" node first, to avoid printing the
* error message from underlying code, as it's a valid case: extcon
* device (and "port" node) may be missing in case of "usb-role-switch"
* or OTG mode.
*/
np_phy = of_parse_phandle(dev->of_node, "phys", 0);
if (of_graph_is_present(np_phy)) {
struct device_node *np_conn;
np_conn = of_graph_get_remote_node(np_phy, -1, -1);
if (np_conn)
edev = extcon_find_edev_by_node(np_conn);
of_node_put(np_conn);
}
of_node_put(np_phy);
return edev;
}
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
......@@ -1743,6 +1789,13 @@ static int dwc3_probe(struct platform_device *pdev)
goto err2;
}
dwc->edev = dwc3_get_extcon(dwc);
if (IS_ERR(dwc->edev)) {
ret = PTR_ERR(dwc->edev);
dev_err_probe(dwc->dev, ret, "failed to get extcon\n");
goto err3;
}
ret = dwc3_get_dr_mode(dwc);
if (ret)
goto err3;
......
......@@ -8,7 +8,6 @@
*/
#include <linux/extcon.h>
#include <linux/of_graph.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/property.h>
......@@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
}
static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *np_phy;
struct extcon_dev *edev = NULL;
const char *name;
if (device_property_read_bool(dev, "extcon"))
return extcon_get_edev_by_phandle(dev, 0);
/*
* Device tree platforms should get extcon via phandle.
* On ACPI platforms, we get the name from a device property.
* This device property is for kernel internal use only and
* is expected to be set by the glue code.
*/
if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
edev = extcon_get_extcon_dev(name);
if (!edev)
return ERR_PTR(-EPROBE_DEFER);
return edev;
}
/*
* Try to get an extcon device from the USB PHY controller's "port"
* node. Check if it has the "port" node first, to avoid printing the
* error message from underlying code, as it's a valid case: extcon
* device (and "port" node) may be missing in case of "usb-role-switch"
* or OTG mode.
*/
np_phy = of_parse_phandle(dev->of_node, "phys", 0);
if (of_graph_is_present(np_phy)) {
struct device_node *np_conn;
np_conn = of_graph_get_remote_node(np_phy, -1, -1);
if (np_conn)
edev = extcon_find_edev_by_node(np_conn);
of_node_put(np_conn);
}
of_node_put(np_phy);
return edev;
}
#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
#define ROLE_SWITCH 1
static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
......@@ -584,10 +538,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
{
int ret, irq;
dwc->edev = dwc3_get_extcon(dwc);
if (IS_ERR(dwc->edev))
return PTR_ERR(dwc->edev);
if (ROLE_SWITCH &&
device_property_read_bool(dwc->dev, "usb-role-switch")) {
ret = dwc3_setup_role_switch(dwc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment