Merge tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are three sets of patches for the soc tree:

   - Marek Behún addresses multiple build time regressions caused by
     changes to the cznic turris-omnia support

   - Dmitry Torokhov fixes a regression in the legacy "gumstix" board
     code he cleaned up earlier

   - The TI K3 maintainers found multiple bugs in the in gpio, audio and
     pcie devicetree nodes"

* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa/gumstix: fix attaching properties to vbus gpio device
  doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
  doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
  platform: cznic: turris-omnia-mcu: Make GPIO code optional
  platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
  platform: cznic: turris-omnia-mcu: Make TRNG code optional
  platform: cznic: turris-omnia-mcu: Make watchdog code optional
  arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
  arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
  arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
  arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
  arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1

Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu

@@ -32,9 +32,9 @@ Description:	(RW) The front button on the Turris Omnia router can be
 		interrupt.
 
 		This file switches between these two modes:
-		- "mcu" makes the button press event be handled by the MCU to
-		  change the LEDs panel intensity.
-		- "cpu" makes the button press event be handled by the CPU.
+		 - ``mcu`` makes the button press event be handled by the MCU to
+		   change the LEDs panel intensity.
+		 - ``cpu`` makes the button press event be handled by the CPU.
 
 		Format: %s.
 

arch/arm/mach-pxa/gumstix.c

@@ -21,6 +21,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -40,6 +41,7 @@
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
 #include "gumstix.h"
+#include "devices.h"
 
 #include "generic.h"
 
@@ -99,8 +101,8 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_PXA25X
-static const struct property_entry spitz_mci_props[] __initconst = {
+#if IS_ENABLED(CONFIG_USB_PXA25X)
+static const struct property_entry gumstix_vbus_props[] __initconst = {
 	PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node,
 			    GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH),
 	PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node,
@@ -109,8 +111,9 @@ static const struct property_entry spitz_mci_props[] __initconst = {
 };
 
 static const struct platform_device_info gumstix_gpio_vbus_info __initconst = {
-	.name	= "gpio-vbus",
-	.id	= PLATFORM_DEVID_NONE,
+	.name		= "gpio-vbus",
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= gumstix_vbus_props,
 };
 
 static void __init gumstix_udc_init(void)

arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi

@@ -43,15 +43,6 @@ simple-audio-card,cpu {
 			sound-dai = <&mcasp0>;
 		};
 	};
-
-	reg_usb_hub: regulator-usb-hub {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-		regulator-name = "HUB_PWR_EN";
-	};
 };
 
 /* Verdin ETHs */
@@ -193,11 +184,6 @@ &ospi0 {
 	status = "okay";
 };
 
-/* Do not force CTRL_SLEEP_MOCI# always enabled */
-&reg_force_sleep_moci {
-	status = "disabled";
-};
-
 /* Verdin SD_1 */
 &sdhci1 {
 	status = "okay";
@@ -218,15 +204,7 @@ &usbss1 {
 };
 
 &usb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
-
-	usb-hub@1 {
-		compatible = "usb424,2744";
-		reg = <1>;
-		vdd-supply = <&reg_usb_hub>;
-	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */

arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi

@@ -138,12 +138,6 @@ reg_1v8_eth: regulator-1v8-eth {
 		vin-supply = <&reg_1v8>;
 	};
 
-	/*
-	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
-	 * peripherals on the carrier board powered.
-	 * If more granularity or power saving is required this can be disabled
-	 * in the carrier board device tree files.
-	 */
 	reg_force_sleep_moci: regulator-force-sleep-moci {
 		compatible = "regulator-fixed";
 		enable-active-high;

arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi

@@ -146,6 +146,8 @@ mcu_gpio0: gpio@4201000 {
 		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
+			      <&mcu_pmx0 22 32 2>;
 	};
 
 	mcu_rti0: watchdog@4880000 {

arch/arm64/boot/dts/ti/k3-am62p-main.dtsi

@@ -45,7 +45,8 @@ &inta_main_dmss {
 &main_pmx0 {
 	pinctrl-single,gpio-range =
 		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 92 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 22 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;

arch/arm64/boot/dts/ti/k3-j722s-main.dtsi

@@ -193,7 +193,8 @@ &inta_main_dmss {
 &main_pmx0 {
 	pinctrl-single,gpio-range =
 		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 55 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,

arch/arm64/boot/dts/ti/k3-j784s4-evm.dts

@@ -1262,6 +1262,14 @@ &dss {
 &serdes0 {
 	status = "okay";
 
+	serdes0_pcie1_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
 	serdes0_usb_link: phy@3 {
 		reg = <3>;
 		cdns,num-lanes = <1>;
@@ -1386,23 +1394,6 @@ &main_mcan4 {
 	phys = <&transceiver3>;
 };
 
-&serdes0 {
-	status = "okay";
-
-	serdes0_pcie1_link: phy@0 {
-		reg = <0>;
-		cdns,num-lanes = <4>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>,
-			 <&serdes_wiz0 3>, <&serdes_wiz0 4>;
-	};
-};
-
-&serdes_wiz0 {
-	status = "okay";
-};
-
 &pcie1_rc {
 	status = "okay";
 	num-lanes = <2>;

arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi

@@ -2755,7 +2755,7 @@ mcasp3: mcasp@2b30000 {
 		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
 		dma-names = "tx", "rx";
 		clocks = <&k3_clks 268 0>;
 		clock-names = "fck";
@@ -2773,7 +2773,7 @@ mcasp4: mcasp@2b40000 {
 		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
 		dma-names = "tx", "rx";
 		clocks = <&k3_clks 269 0>;
 		clock-names = "fck";

drivers/platform/cznic/Kconfig

@@ -16,35 +16,65 @@ config TURRIS_OMNIA_MCU
 	tristate "Turris Omnia MCU driver"
 	depends on MACH_ARMADA_38X || COMPILE_TEST
 	depends on I2C
-	depends on OF
-	depends on WATCHDOG
-	depends on GPIOLIB
-	depends on HW_RANDOM
-	depends on RTC_CLASS
-	depends on WATCHDOG_CORE
-	select GPIOLIB_IRQCHIP
 	help
 	  Say Y here to add support for the features implemented by the
 	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
-	  The features include:
-	  - board poweroff into true low power mode (with voltage regulators
-	    disabled) and the ability to configure wake up from this mode (via
-	    rtcwake)
-	  - true random number generator (if available on the MCU)
-	  - MCU watchdog
-	  - GPIO pins
-	    - to get front button press events (the front button can be
-	      configured either to generate press events to the CPU or to change
-	      front LEDs panel brightness)
-	    - to enable / disable USB port voltage regulators and to detect
-	      USB overcurrent
-	    - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0
-	    - to configure resets of various peripherals on board revisions 32+
-	    - to enable / disable the VHV voltage regulator to the SOC in order
-	      to be able to program SOC's OTP on board revisions 32+
-	    - to get input from the LED output pins of the WAN ethernet PHY, LAN
-	      switch and MiniPCIe ports
+	  This option only enables the core part of the driver. Specific
+	  features can be enabled by subsequent config options.
 	  To compile this driver as a module, choose M here; the module will be
 	  called turris-omnia-mcu.
 
+if TURRIS_OMNIA_MCU
+
+config TURRIS_OMNIA_MCU_GPIO
+	bool "Turris Omnia MCU GPIOs"
+	default y
+	depends on GPIOLIB
+	depends on OF
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to add support for controlling MCU GPIO pins and receiving
+	  MCU interrupts on CZ.NIC's Turris Omnia.
+	  This enables you to
+	  - get front button press events (the front button can be configured
+	    either to generate press events to the CPU or to change front LEDs
+	    panel brightness),
+	  - enable / disable USB port voltage regulators and to detect USB
+	    overcurrent,
+	  - detect MiniPCIe / mSATA card presence in MiniPCIe port 0,
+	  - configure resets of various peripherals on board revisions 32+,
+	  - enable / disable the VHV voltage regulator to the SOC in order to be
+	    able to program SOC's OTP on board revisions 32+,
+	  - get input from the LED output pins of the WAN ethernet PHY, LAN
+	    switch and MiniPCIe ports.
+
+config TURRIS_OMNIA_MCU_SYSOFF_WAKEUP
+	bool "Turris Omnia MCU system off and RTC wakeup"
+	default y
+	depends on RTC_CLASS
+	help
+	  Say Y here to add support for CZ.NIC's Turris Omnia board poweroff
+	  into true low power mode (with voltage regulators disabled) and the
+	  ability to configure wake up from this mode (via rtcwake).
+
+config TURRIS_OMNIA_MCU_WATCHDOG
+	bool "Turris Omnia MCU watchdog"
+	default y
+	depends on WATCHDOG
+	select WATCHDOG_CORE
+	help
+	  Say Y here to add support for watchdog provided by CZ.NIC's Turris
+	  Omnia MCU.
+
+config TURRIS_OMNIA_MCU_TRNG
+	bool "Turris Omnia MCU true random number generator"
+	default y
+	depends on TURRIS_OMNIA_MCU_GPIO
+	depends on HW_RANDOM
+	help
+	  Say Y here to add support for the true random number generator
+	  provided by CZ.NIC's Turris Omnia MCU.
+
+endif # TURRIS_OMNIA_MCU
+
 endif # CZNIC_PLATFORMS

drivers/platform/cznic/Makefile

@@ -2,7 +2,7 @@
 
 obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
 turris-omnia-mcu-y		:= turris-omnia-mcu-base.o
-turris-omnia-mcu-y		+= turris-omnia-mcu-gpio.o
-turris-omnia-mcu-y		+= turris-omnia-mcu-sys-off-wakeup.o
-turris-omnia-mcu-y		+= turris-omnia-mcu-trng.o
-turris-omnia-mcu-y		+= turris-omnia-mcu-watchdog.o
+turris-omnia-mcu-$(CONFIG_TURRIS_OMNIA_MCU_GPIO)		+= turris-omnia-mcu-gpio.o
+turris-omnia-mcu-$(CONFIG_TURRIS_OMNIA_MCU_SYSOFF_WAKEUP)	+= turris-omnia-mcu-sys-off-wakeup.o
+turris-omnia-mcu-$(CONFIG_TURRIS_OMNIA_MCU_TRNG)		+= turris-omnia-mcu-trng.o
+turris-omnia-mcu-$(CONFIG_TURRIS_OMNIA_MCU_WATCHDOG)		+= turris-omnia-mcu-watchdog.o

drivers/platform/cznic/turris-omnia-mcu-base.c

@@ -197,8 +197,12 @@ static const struct attribute_group omnia_mcu_base_group = {
 
 static const struct attribute_group *omnia_mcu_groups[] = {
 	&omnia_mcu_base_group,
+#ifdef CONFIG_TURRIS_OMNIA_MCU_GPIO
 	&omnia_mcu_gpio_group,
+#endif
+#ifdef CONFIG_TURRIS_OMNIA_MCU_SYSOFF_WAKEUP
 	&omnia_mcu_poweroff_group,
+#endif
 	NULL
 };
 

drivers/platform/cznic/turris-omnia-mcu.h

@@ -33,6 +33,7 @@ struct omnia_mcu {
 	u8 board_first_mac[ETH_ALEN];
 	u8 board_revision;
 
+#ifdef CONFIG_TURRIS_OMNIA_MCU_GPIO
 	/* GPIO chip */
 	struct gpio_chip gc;
 	struct mutex lock;
@@ -41,18 +42,25 @@ struct omnia_mcu {
 	struct delayed_work button_release_emul_work;
 	unsigned long last_status;
 	bool button_pressed_emul;
+#endif
 
+#ifdef CONFIG_TURRIS_OMNIA_MCU_SYSOFF_WAKEUP
 	/* RTC device for configuring wake-up */
 	struct rtc_device *rtcdev;
 	u32 rtc_alarm;
 	bool front_button_poweron;
+#endif
 
+#ifdef CONFIG_TURRIS_OMNIA_MCU_WATCHDOG
 	/* MCU watchdog */
 	struct watchdog_device wdt;
+#endif
 
+#ifdef CONFIG_TURRIS_OMNIA_MCU_TRNG
 	/* true random number generator */
 	struct hwrng trng;
 	struct completion trng_entropy_ready;
+#endif
 };
 
 int omnia_cmd_write_read(const struct i2c_client *client,
@@ -182,13 +190,43 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd,
 	return omnia_cmd_read(client, cmd, reply, sizeof(*reply));
 }
 
+#ifdef CONFIG_TURRIS_OMNIA_MCU_GPIO
 extern const u8 omnia_int_to_gpio_idx[32];
 extern const struct attribute_group omnia_mcu_gpio_group;
-extern const struct attribute_group omnia_mcu_poweroff_group;
-
 int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+#else
+static inline int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_TURRIS_OMNIA_MCU_SYSOFF_WAKEUP
+extern const struct attribute_group omnia_mcu_poweroff_group;
 int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
+#else
+static inline int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_TURRIS_OMNIA_MCU_TRNG
 int omnia_mcu_register_trng(struct omnia_mcu *mcu);
+#else
+static inline int omnia_mcu_register_trng(struct omnia_mcu *mcu)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_TURRIS_OMNIA_MCU_WATCHDOG
 int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
+#else
+static inline int omnia_mcu_register_watchdog(struct omnia_mcu *mcu)
+{
+	return 0;
+}
+#endif
 
 #endif /* __TURRIS_OMNIA_MCU_H */