ARM: dts: qcom: replace status value "ok" by "okay"

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830191643.20717-1-freifunk@adrianschmutzler.de
[bjorn: Rebased and included fixup of sdx55-mtp]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm/boot/dts/qcom-apq8060-dragonboard.dts

@@ -461,11 +461,11 @@ led@133 {
 		};
 
 		gsbi@19800000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
 
 			i2c@19880000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
 
@@ -497,17 +497,17 @@ wm8903: wm8903@1a {
 		};
 
 		gsbi@19c00000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 
 			serial@19c40000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
 			};
 
 			i2c@19c80000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
 
@@ -571,7 +571,7 @@ kxsd9@18 {
 
 		external-bus@1a100000 {
 			/* The EBI2 will instantiate first, then populate its children */
-			status = "ok";
+			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&dragon_ebi2_pins>;
 

arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts

@@ -302,11 +302,11 @@ bq27541@55 {
 		};
 
 		gsbi@16500000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 
 			serial@16540000 {
-				status = "ok";
+				status = "okay";
 
 				pinctrl-names = "default";
 				pinctrl-0 = <&gsbi6_uart_4pins>;
@@ -314,10 +314,10 @@ serial@16540000 {
 		};
 
 		gsbi@16600000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
-				status = "ok";
+				status = "okay";
 			};
 		};
 

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

@@ -141,10 +141,10 @@ eeprom@50 {
 		};
 
 		gsbi@16600000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
@@ -152,7 +152,7 @@ serial@16640000 {
 
 		/* OTG */
 		usb@12500000 {
-			status = "ok";
+			status = "okay";
 			dr_mode = "otg";
 			ulpi {
 				phy {
@@ -209,7 +209,7 @@ pios {
 		};
 
 		pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			vdda-supply = <&pm8921_s3>;
 			vdda_phy-supply = <&pm8921_lvs6>;
 			vdda_refclk-supply = <&v3p3_fixed>;

arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

@@ -215,21 +215,21 @@ spi4: spi@1a280000 {
 		};
 
 		gsbi@16500000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_UART_W_FC>;
 
 			serial@16540000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&gsbi6_uart_4pins>;
 			};
 		};
 
 		gsbi@16600000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
-				status = "ok";
+				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
@@ -279,7 +279,7 @@ phy {
 		};
 
 		pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			vdda-supply = <&pm8921_s3>;
 			vdda_phy-supply = <&pm8921_lvs6>;
 			vdda_refclk-supply = <&ext_3p3v>;

arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts

@@ -362,11 +362,11 @@ phy {
 		};
 
 		gsbi@1a200000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 
 			serial@1a240000 {
-				status = "ok";
+				status = "okay";
 
 				pinctrl-names = "default";
 				pinctrl-0 = <&gsbi5_uart_pin_a>;

arch/arm/boot/dts/qcom-apq8074-dragonboard.dts

@@ -19,13 +19,13 @@ chosen {
 
 	soc {
 		serial@f991e000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sdhci@f9824900 {
 			bus-width = <8>;
 			non-removable;
-			status = "ok";
+			status = "okay";
 
 			vmmc-supply = <&pm8941_l20>;
 			vqmmc-supply = <&pm8941_s3>;
@@ -39,14 +39,14 @@ sdhci@f98a4900 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
 			bus-width = <4>;
-			status = "ok";
+			status = "okay";
 
 			vmmc-supply = <&pm8941_l21>;
 			vqmmc-supply = <&pm8941_l13>;
 		};
 
 		usb@f9a55000 {
-			status = "ok";
+			status = "okay";
 			phys = <&usb_hs2_phy>;
 			phy-select = <&tcsr 0xb000 1>;
 			extcon = <&smbb>, <&usb_id>;
@@ -56,7 +56,7 @@ usb@f9a55000 {
 			adp-disable;
 			ulpi {
 				phy@b {
-					status = "ok";
+					status = "okay";
 					v3p3-supply = <&pm8941_l24>;
 					v1p8-supply = <&pm8941_l6>;
 					extcon = <&smbb>;

arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi

@@ -30,7 +30,7 @@ chosen {
 
 	soc {
 		rng@22000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pinctrl@1000000 {
@@ -66,13 +66,13 @@ pinconf_cs {
 		};
 
 		blsp_dma: dma@7884000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		spi@78b5000 {
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 			cs-gpios = <&tlmm 54 0>;
 
 			mx25l25635e@0 {
@@ -87,27 +87,27 @@ mx25l25635e@0 {
 		serial@78af000 {
 			pinctrl-0 = <&serial_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		cryptobam: dma@8e04000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		crypto@8e3a000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		watchdog@b017000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		wifi@a000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		wifi@a800000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts

@@ -9,11 +9,11 @@ / {
 
 	soc {
 		dma@7984000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		qpic-nand@79b0000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

@@ -70,23 +70,23 @@ nand_pins: nand-pins {
 		serial@78af000 {
 			pinctrl-0 = <&serial_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@78b0000 {
 			pinctrl-0 = <&serial_1_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		dma@7884000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		spi@78b5000 { /* BLSP1 QUP1 */
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 			cs-gpios = <&tlmm 12 0>;
 
 			m25p80@0 {
@@ -99,7 +99,7 @@ m25p80@0 {
 		};
 
 		pci@40000000 {
-			status = "ok";
+			status = "okay";
 			perst-gpio = <&tlmm 38 0x1>;
 		};
 

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

@@ -9,12 +9,12 @@ / {
 
 	soc {
 		pci@40000000 {
-			status = "ok";
+			status = "okay";
 			perst-gpio = <&tlmm 38 0x1>;
 		};
 
 		spi@78b6000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pinctrl@1000000 {
@@ -43,13 +43,13 @@ pinmux_cs {
 		serial@78b0000 {
 			pinctrl-0 = <&serial_1_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		spi@78b5000 {
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 			cs-gpios = <&tlmm 12 0>;
 
 			m25p80@0 {

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts

@@ -19,7 +19,7 @@ serial_1_pins: serial1-pinmux {
 		serial@78b0000 {
 			pinctrl-0 = <&serial_1_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 	};
 };

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

@@ -49,27 +49,27 @@ nand_pins: nand-pins {
 		serial@78af000 {
 			pinctrl-0 = <&serial_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		dma@7884000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		i2c@78b7000 { /* BLSP1 QUP2 */
 			pinctrl-0 = <&i2c_0_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 
 		dma@7984000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		qpic-nand@79b0000 {
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
-			status = "ok";
+			status = "okay";
 		};
 	};
 };

arch/arm/boot/dts/qcom-ipq8064-ap148.dts

@@ -24,7 +24,7 @@ mux {
 
 		gsbi@16300000 {
 			i2c@16380000 {
-				status = "ok";
+				status = "okay";
 				clock-frequency = <200000>;
 				pinctrl-0 = <&i2c4_pins>;
 				pinctrl-names = "default";

arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi

@@ -16,19 +16,19 @@ chosen {
 	soc {
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 		};
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 				spi-max-frequency = <50000000>;
 
 				pinctrl-0 = <&spi_pins>;
@@ -57,12 +57,12 @@ partition@1 {
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
 			ports-implemented = <0x1>;
-			status = "ok";
+			status = "okay";
 		};
 
 		gpio_keys {

arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi

@@ -125,12 +125,12 @@ usb_vbus_5v_pins: usb_vbus_5v_pins {
 };
 
 &gsbi3 {
-	status = "ok";
+	status = "okay";
 	qcom,mode = <GSBI_PROT_SPI>;
 };
 
 &gsbi3_spi {
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&gsbi3_pins>;
 	pinctrl-names = "default";
 	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
@@ -138,34 +138,34 @@ &gsbi3_spi {
 };
 
 &gsbi4 {
-	status = "ok";
+	status = "okay";
 	qcom,mode = <GSBI_PROT_UART_W_FC>;
 };
 
 &gsbi4_serial {
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&gsbi4_pins>;
 	pinctrl-names = "default";
 };
 
 &gsbi5 {
-	status = "ok";
+	status = "okay";
 	qcom,mode = <GSBI_PROT_I2C_UART>;
 };
 
 &gsbi5_i2c {
-	status = "ok";
+	status = "okay";
 	clock-frequency = <200000>;
 	pinctrl-0 = <&gsbi5_i2c_pins>;
 	pinctrl-names = "default";
 };
 
 &gsbi5_serial {
-	status = "ok";
+	status = "okay";
 	pinctrl-0 = <&gsbi5_uart_pins>;
 	pinctrl-names = "default";
 };
 
 &sdcc1 {
-	status = "ok";
+	status = "okay";
 };

arch/arm/boot/dts/qcom-msm8660-surf.dts

@@ -17,10 +17,10 @@ chosen {
 
 	soc {
 		gsbi@19c00000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@19c40000 {
-				status = "ok";
+				status = "okay";
 			};
 		};
 

arch/arm/boot/dts/qcom-msm8960-cdp.dts

@@ -17,10 +17,10 @@ chosen {
 
 	soc {
 		gsbi@16400000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16440000 {
-				status = "ok";
+				status = "okay";
 			};
 		};
 
@@ -273,12 +273,12 @@ pm8921_ncp: ncp {
 		};
 
 		gsbi@16000000 {
-			status = "ok";
+			status = "okay";
 			qcom,mode = <GSBI_PROT_SPI>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_default>;
 			spi@16080000 {
-				status = "ok";
+				status = "okay";
 				eth@0 {
 					compatible = "micrel,ks8851";
 					reg = <0>;

arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts

@@ -256,11 +256,11 @@ l24 {
 
 &soc {
 	serial@f991e000 {
-		status = "ok";
+		status = "okay";
 	};
 
 	remoteproc@fb21b000 {
-		status = "ok";
+		status = "okay";
 
 		vddmx-supply = <&pm8841_s1>;
 		vddcx-supply = <&pm8841_s2>;
@@ -273,7 +273,7 @@ smd-edge {
 			label = "pronto";
 
 			wcnss {
-				status = "ok";
+				status = "okay";
 			};
 		};
 	};
@@ -335,7 +335,7 @@ fm {
 	};
 
 	sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
@@ -348,7 +348,7 @@ sdhci@f9824900 {
 	};
 
 	sdhci@f98a4900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l21>;
 		vqmmc-supply = <&pm8941_l13>;
@@ -360,7 +360,7 @@ sdhci@f98a4900 {
 	};
 
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -373,7 +373,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pm8941_l6>;
 				v3p3-supply = <&pm8941_l24>;

arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

@@ -239,7 +239,7 @@ vreg_wlan: wlan-regulator {
 
 &soc {
 	serial@f991d000 {
-		status = "ok";
+		status = "okay";
 	};
 
 	pinctrl@fd510000 {
@@ -410,7 +410,7 @@ rts {
 	};
 
 	sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
@@ -423,7 +423,7 @@ sdhci@f9824900 {
 	};
 
 	sdhci@f98a4900 {
-		status = "ok";
+		status = "okay";
 
 		max-frequency = <100000000>;
 		bus-width = <4>;
@@ -471,7 +471,7 @@ volume-down {
 	};
 
 	serial@f9960000 {
-		status = "ok";
+		status = "okay";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&blsp2_uart10_pin_a>;
@@ -490,7 +490,7 @@ bluetooth {
 	};
 
 	i2c@f9967000 {
-		status = "ok";
+		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_pins>;
 		clock-frequency = <355000>;
@@ -498,7 +498,7 @@ i2c@f9967000 {
 
 		led-controller@38 {
 			compatible = "ti,lm3630a";
-			status = "ok";
+			status = "okay";
 			reg = <0x38>;
 
 			#address-cells = <1>;
@@ -514,7 +514,7 @@ led@0 {
 	};
 
 	i2c@f9968000 {
-		status = "ok";
+		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c12_pins>;
 		clock-frequency = <100000>;
@@ -551,7 +551,7 @@ bmp280@76 {
 	};
 
 	i2c@f9923000 {
-		status = "ok";
+		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_pins>;
 		clock-frequency = <100000>;
@@ -585,7 +585,7 @@ fuelgauge: max17048@36 {
 	};
 
 	i2c@f9924000 {
-		status = "ok";
+		status = "okay";
 
 		clock-frequency = <355000>;
 		qcom,src-freq = <50000000>;
@@ -620,7 +620,7 @@ rmi4-f12@12 {
 	};
 
 	i2c@f9925000 {
-		status = "ok";
+		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_pins>;
 		clock-frequency = <100000>;
@@ -638,7 +638,7 @@ avago_apds993@39 {
 	};
 
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -652,7 +652,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pm8941_l6>;
 				v3p3-supply = <&pm8941_l24>;
@@ -663,14 +663,14 @@ phy@a {
 	};
 
 	mdss@fd900000 {
-		status = "ok";
+		status = "okay";
 
 		mdp@fd900000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		dsi@fd922800 {
-			status = "ok";
+			status = "okay";
 
 			vdda-supply = <&pm8941_l2>;
 			vdd-supply = <&pm8941_lvs3>;
@@ -704,7 +704,7 @@ panel_in: endpoint {
 		};
 
 		dsi-phy@fd922a00 {
-			status = "ok";
+			status = "okay";
 
 			vddio-supply = <&pm8941_l12>;
 		};

arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts

@@ -303,7 +303,7 @@ vreg_wlan: wlan-regulator {
 
 &soc {
 	serial@f991e000 {
-		status = "ok";
+		status = "okay";
 	};
 
 	gpio-keys {
@@ -456,7 +456,7 @@ int {
 	};
 
 	sdhc_1: sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pma8084_l20>;
 		vqmmc-supply = <&pma8084_s4>;
@@ -469,7 +469,7 @@ sdhc_1: sdhci@f9824900 {
 	};
 
 	sdhc_2: sdhci@f9864900 {
-		status = "ok";
+		status = "okay";
 
 		max-frequency = <100000000>;
 
@@ -518,7 +518,7 @@ wifi@1 {
 	};
 
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -531,7 +531,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pma8084_l6>;
 				v3p3-supply = <&pma8084_l24>;

arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts

@@ -261,7 +261,7 @@ l24 {
 
 &soc {
 	sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
@@ -274,7 +274,7 @@ sdhci@f9824900 {
 	};
 
 	sdhci@f98a4900 {
-		status = "ok";
+		status = "okay";
 
 		bus-width = <4>;
 
@@ -288,7 +288,7 @@ sdhci@f98a4900 {
 	};
 
 	serial@f991e000 {
-		status = "ok";
+		status = "okay";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
@@ -366,7 +366,7 @@ dma-controller@f9944000 {
 	};
 
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -379,7 +379,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pm8941_l6>;
 				v3p3-supply = <&pm8941_l24>;
@@ -415,7 +415,7 @@ gpio_keys_pin_a: gpio-keys-active {
 		};
 
 		coincell@2800 {
-			status = "ok";
+			status = "okay";
 			qcom,rset-ohms = <2100>;
 			qcom,vset-millivolts = <3000>;
 		};
@@ -423,7 +423,7 @@ coincell@2800 {
 
 	pm8941@1 {
 		wled@d800 {
-			status = "ok";
+			status = "okay";
 
 			qcom,cs-out;
 			qcom,current-limit = <20>;

arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts

@@ -279,7 +279,7 @@ vreg_wlan: wlan-regulator {
 
 &soc {
 	sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
@@ -292,7 +292,7 @@ sdhci@f9824900 {
 	};
 
 	sdhci@f9864900 {
-		status = "ok";
+		status = "okay";
 
 		max-frequency = <100000000>;
 		non-removable;
@@ -316,7 +316,7 @@ bcrmf@1 {
 	};
 
 	sdhci@f98a4900 {
-		status = "ok";
+		status = "okay";
 
 		bus-width = <4>;
 
@@ -330,14 +330,14 @@ sdhci@f98a4900 {
 	};
 
 	serial@f991e000 {
-		status = "ok";
+		status = "okay";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -350,7 +350,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pm8941_l6>;
 				v3p3-supply = <&pm8941_l24>;
@@ -482,7 +482,7 @@ pin {
 	};
 
 	i2c@f9964000 {
-		status = "ok";
+		status = "okay";
 
 		clock-frequency = <355000>;
 		qcom,src-freq = <50000000>;
@@ -522,7 +522,7 @@ rmi-f11@11 {
 	};
 
 	i2c@f9967000 {
-		status = "ok";
+		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_pins>;
 		clock-frequency = <355000>;
@@ -635,7 +635,7 @@ lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
 		};
 
 		coincell@2800 {
-			status = "ok";
+			status = "okay";
 			qcom,rset-ohms = <2100>;
 			qcom,vset-millivolts = <3000>;
 		};

arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts

@@ -261,7 +261,7 @@ l24 {
 
 &soc {
 	usb@f9a55000 {
-		status = "ok";
+		status = "okay";
 
 		phys = <&usb_hs1_phy>;
 		phy-select = <&tcsr 0xb000 0>;
@@ -274,7 +274,7 @@ usb@f9a55000 {
 
 		ulpi {
 			phy@a {
-				status = "ok";
+				status = "okay";
 
 				v1p8-supply = <&pm8941_l6>;
 				v3p3-supply = <&pm8941_l24>;
@@ -286,7 +286,7 @@ phy@a {
 	};
 
 	sdhci@f9824900 {
-		status = "ok";
+		status = "okay";
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
@@ -299,7 +299,7 @@ sdhci@f9824900 {
 	};
 
 	sdhci@f98a4900 {
-		status = "ok";
+		status = "okay";
 
 		bus-width = <4>;
 
@@ -313,14 +313,14 @@ sdhci@f98a4900 {
 	};
 
 	serial@f991e000 {
-		status = "ok";
+		status = "okay";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
 	i2c@f9924000 {
-		status = "ok";
+		status = "okay";
 
 		clock-frequency = <355000>;
 		qcom,src-freq = <50000000>;
@@ -464,7 +464,7 @@ gpio_keys_pin_a: gpio-keys-active {
 		};
 
 		coincell@2800 {
-			status = "ok";
+			status = "okay";
 			qcom,rset-ohms = <2100>;
 			qcom,vset-millivolts = <3000>;
 		};
@@ -472,7 +472,7 @@ coincell@2800 {
 
 	pm8941@1 {
 		wled@d800 {
-			status = "ok";
+			status = "okay";
 
 			qcom,cs-out;
 			qcom,current-limit = <20>;

arch/arm/boot/dts/qcom-sdx55-mtp.dts

@@ -210,15 +210,15 @@ ldo16 {
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;