Merge tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...

Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt

+* Alphascale asm9260 SoC Real Time Clock
+
+Required properties:
+- compatible: Should be "alphascale,asm9260-rtc"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- interrupts: IRQ line for the RTC.
+- clocks: Reference to the clock entry.
+- clock-names: should contain:
+  * "ahb" for the SoC RTC clock
+
+Example:
+rtc0: rtc@800a0000 {
+	compatible = "alphascale,asm9260-rtc";
+	reg = <0x800a0000 0x100>;
+	clocks = <&acc CLKID_AHB_RTC>;
+	clock-names = "ahb";
+	interrupts = <2>;
+};

Documentation/devicetree/bindings/rtc/epson,rx6110.txt

+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+I2C mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg : the I2C address of the device for I2C
+
+Example:
+
+	rtc: rtc@32 {
+		compatible = "epson,rx6110"
+		reg = <0x32>;
+	};
+
+SPI mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg: chip select number
+  - spi-cs-high: RX6110 needs chipselect high
+  - spi-cpha: RX6110 works with SPI shifted clock phase
+  - spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+	rtc: rtc@3 {
+		compatible = "epson,rx6110"
+		reg = <3>
+		spi-cs-high;
+		spi-cpha;
+		spi-cpol;
+	};

Documentation/devicetree/bindings/rtc/maxim,ds3231.txt

+* Maxim DS3231 Real Time Clock
+
+Required properties:
+see: Documentation/devicetree/bindings/i2c/trivial-devices.txt
+
+Optional property:
+- #clock-cells: Should be 1.
+- clock-output-names:
+  overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz".
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+    - 0: square-wave output on the SQW pin
+    - 1: square-wave output on the 32kHz pin
+
+- interrupts: rtc alarm/event interrupt. When this property is selected,
+  clock on the SQW pin cannot be used.
+
+Example:
+
+ds3231: ds3231@51 {
+	compatible = "maxim,ds3231";
+	reg = <0x68>;
+	#clock-cells = <1>;
+};
+
+device1 {
+...
+	clocks = <&ds3231 0>;
+...
+};
+
+device2 {
+...
+	clocks = <&ds3231 1>;
+...
+};

Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt

+* Microchip PIC32 Real Time Clock and Calendar
+
+The RTCC keeps time in hours, minutes, and seconds, and one half second. It
+provides a calendar in weekday, date, month, and year. It also provides a
+configurable alarm.
+
+Required properties:
+- compatible: should be: "microchip,pic32mzda-rtc"
+- reg: physical base address of the controller and length of memory mapped
+    region.
+- interrupts: RTC alarm/event interrupt
+- clocks: clock phandle
+
+Example:
+
+	rtc: rtc@1f8c0000 {
+		compatible = "microchip,pic32mzda-rtc";
+		reg = <0x1f8c0000 0x60>;
+		interrupts = <166 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&PBCLK6>;
+	};

Documentation/rtc.txt

@@ -157,6 +157,12 @@ wakealarm:	 The time at which the clock will generate a system wakeup
 		 the epoch by default, or if there's a leading +, seconds in the
 		 future, or if there is a leading +=, seconds ahead of the current
 		 alarm.
+offset:		 The amount which the rtc clock has been adjusted in firmware.
+		 Visible only if the driver supports clock offset adjustment.
+		 The unit is parts per billion, i.e. The number of clock ticks
+		 which are added to or removed from the rtc's base clock per
+		 billion ticks. A positive value makes a day pass more slowly,
+		 longer, and a negative value makes a day pass more quickly.
 
 IOCTL INTERFACE
 ---------------

drivers/mfd/max77686.c

@@ -35,8 +35,6 @@
 #include <linux/err.h>
 #include <linux/of.h>
 
-#define I2C_ADDR_RTC	(0x0C >> 1)
-
 static const struct mfd_cell max77686_devs[] = {
 	{ .name = "max77686-pmic", },
 	{ .name = "max77686-rtc", },
@@ -116,11 +114,6 @@ static const struct regmap_config max77686_regmap_config = {
 	.val_bits = 8,
 };
 
-static const struct regmap_config max77686_rtc_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-};
-
 static const struct regmap_config max77802_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -156,25 +149,6 @@ static const struct regmap_irq_chip max77686_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(max77686_irqs),
 };
 
-static const struct regmap_irq max77686_rtc_irqs[] = {
-	/* RTC interrupts */
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTC60S_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA1_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA2_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_SMPL_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTC1S_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_WTSR_MSK, },
-};
-
-static const struct regmap_irq_chip max77686_rtc_irq_chip = {
-	.name			= "max77686-rtc",
-	.status_base		= MAX77686_RTC_INT,
-	.mask_base		= MAX77686_RTC_INTM,
-	.num_regs		= 1,
-	.irqs			= max77686_rtc_irqs,
-	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
-};
-
 static const struct regmap_irq_chip max77802_irq_chip = {
 	.name			= "max77802-pmic",
 	.status_base		= MAX77802_REG_INT1,
@@ -184,15 +158,6 @@ static const struct regmap_irq_chip max77802_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(max77686_irqs),
 };
 
-static const struct regmap_irq_chip max77802_rtc_irq_chip = {
-	.name			= "max77802-rtc",
-	.status_base		= MAX77802_RTC_INT,
-	.mask_base		= MAX77802_RTC_INTM,
-	.num_regs		= 1,
-	.irqs			= max77686_rtc_irqs, /* same masks as 77686 */
-	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
-};
-
 static const struct of_device_id max77686_pmic_dt_match[] = {
 	{
 		.compatible = "maxim,max77686",
@@ -214,8 +179,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	int ret = 0;
 	const struct regmap_config *config;
 	const struct regmap_irq_chip *irq_chip;
-	const struct regmap_irq_chip *rtc_irq_chip;
-	struct regmap **rtc_regmap;
 	const struct mfd_cell *cells;
 	int n_devs;
 
@@ -242,15 +205,11 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	if (max77686->type == TYPE_MAX77686) {
 		config = &max77686_regmap_config;
 		irq_chip = &max77686_irq_chip;
-		rtc_irq_chip = &max77686_rtc_irq_chip;
-		rtc_regmap = &max77686->rtc_regmap;
 		cells =  max77686_devs;
 		n_devs = ARRAY_SIZE(max77686_devs);
 	} else {
 		config = &max77802_regmap_config;
 		irq_chip = &max77802_irq_chip;
-		rtc_irq_chip = &max77802_rtc_irq_chip;
-		rtc_regmap = &max77686->regmap;
 		cells =  max77802_devs;
 		n_devs = ARRAY_SIZE(max77802_devs);
 	}
@@ -270,60 +229,25 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 		return -ENODEV;
 	}
 
-	if (max77686->type == TYPE_MAX77686) {
-		max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
-		if (!max77686->rtc) {
-			dev_err(max77686->dev,
-				"Failed to allocate I2C device for RTC\n");
-			return -ENODEV;
-		}
-		i2c_set_clientdata(max77686->rtc, max77686);
-
-		max77686->rtc_regmap =
-			devm_regmap_init_i2c(max77686->rtc,
-					     &max77686_rtc_regmap_config);
-		if (IS_ERR(max77686->rtc_regmap)) {
-			ret = PTR_ERR(max77686->rtc_regmap);
-			dev_err(max77686->dev,
-				"failed to allocate RTC regmap: %d\n",
-				ret);
-			goto err_unregister_i2c;
-		}
-	}
-
 	ret = regmap_add_irq_chip(max77686->regmap, max77686->irq,
 				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
 				  IRQF_SHARED, 0, irq_chip,
 				  &max77686->irq_data);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
-		goto err_unregister_i2c;
-	}
-
-	ret = regmap_add_irq_chip(*rtc_regmap, max77686->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, rtc_irq_chip,
-				  &max77686->rtc_irq_data);
-	if (ret) {
-		dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
-		goto err_del_irqc;
+		return ret;
 	}
 
 	ret = mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL, 0, NULL);
 	if (ret < 0) {
 		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
-		goto err_del_rtc_irqc;
+		goto err_del_irqc;
 	}
 
 	return 0;
 
-err_del_rtc_irqc:
-	regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
 err_del_irqc:
 	regmap_del_irq_chip(max77686->irq, max77686->irq_data);
-err_unregister_i2c:
-	if (max77686->type == TYPE_MAX77686)
-		i2c_unregister_device(max77686->rtc);
 
 	return ret;
 }
@@ -334,12 +258,8 @@ static int max77686_i2c_remove(struct i2c_client *i2c)
 
 	mfd_remove_devices(max77686->dev);
 
-	regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
 	regmap_del_irq_chip(max77686->irq, max77686->irq_data);
 
-	if (max77686->type == TYPE_MAX77686)
-		i2c_unregister_device(max77686->rtc);
-
 	return 0;
 }
 

drivers/rtc/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
 obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
 obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
 obj-$(CONFIG_RTC_DRV_AS3722)	+= rtc-as3722.o
+obj-$(CONFIG_RTC_DRV_ASM9260)	+= rtc-asm9260.o
 obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
 obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
 obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
@@ -59,7 +60,6 @@ obj-$(CONFIG_RTC_DRV_DS1685_FAMILY)	+= rtc-ds1685.o
 obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
 obj-$(CONFIG_RTC_DRV_DS2404)	+= rtc-ds2404.o
 obj-$(CONFIG_RTC_DRV_DS3232)	+= rtc-ds3232.o
-obj-$(CONFIG_RTC_DRV_DS3234)	+= rtc-ds3234.o
 obj-$(CONFIG_RTC_DRV_EFI)	+= rtc-efi.o
 obj-$(CONFIG_RTC_DRV_EM3027)	+= rtc-em3027.o
 obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
@@ -86,7 +86,6 @@ obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MAX77686)	+= rtc-max77686.o
-obj-$(CONFIG_RTC_DRV_MAX77802)	+= rtc-max77802.o
 obj-$(CONFIG_RTC_DRV_MAX8907)	+= rtc-max8907.o
 obj-$(CONFIG_RTC_DRV_MAX8925)	+= rtc-max8925.o
 obj-$(CONFIG_RTC_DRV_MAX8997)	+= rtc-max8997.o
@@ -112,6 +111,7 @@ obj-$(CONFIG_RTC_DRV_PCF85063)	+= rtc-pcf85063.o
 obj-$(CONFIG_RTC_DRV_PCF8523)	+= rtc-pcf8523.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_PCF8583)	+= rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PIC32)	+= rtc-pic32.o
 obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
@@ -128,6 +128,7 @@ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
 obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
 obj-$(CONFIG_RTC_DRV_RV8803)	+= rtc-rv8803.o
 obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
+obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o
 obj-$(CONFIG_RTC_DRV_RX8010)	+= rtc-rx8010.o
 obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o

drivers/rtc/class.c

@@ -361,17 +361,4 @@ static int __init rtc_init(void)
 	rtc_dev_init();
 	return 0;
 }
-
-static void __exit rtc_exit(void)
-{
-	rtc_dev_exit();
-	class_destroy(rtc_class);
-	ida_destroy(&rtc_ida);
-}
-
 subsys_initcall(rtc_init);
-module_exit(rtc_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("RTC class support");
-MODULE_LICENSE("GPL");

drivers/rtc/interface.c

@@ -939,4 +939,58 @@ void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer *timer)
 	mutex_unlock(&rtc->ops_lock);
 }
 
+/**
+ * rtc_read_offset - Read the amount of rtc offset in parts per billion
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * see below for details.
+ *
+ * Kernel interface to read rtc clock offset
+ * Returns 0 on success, or a negative number on error.
+ * If read_offset() is not implemented for the rtc, return -EINVAL
+ */
+int rtc_read_offset(struct rtc_device *rtc, long *offset)
+{
+	int ret;
+
+	if (!rtc->ops)
+		return -ENODEV;
+
+	if (!rtc->ops->read_offset)
+		return -EINVAL;
+
+	mutex_lock(&rtc->ops_lock);
+	ret = rtc->ops->read_offset(rtc->dev.parent, offset);
+	mutex_unlock(&rtc->ops_lock);
+	return ret;
+}
 
+/**
+ * rtc_set_offset - Adjusts the duration of the average second
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * Some rtc's allow an adjustment to the average duration of a second
+ * to compensate for differences in the actual clock rate due to temperature,
+ * the crystal, capacitor, etc.
+ *
+ * Kernel interface to adjust an rtc clock offset.
+ * Return 0 on success, or a negative number on error.
+ * If the rtc offset is not setable (or not implemented), return -EINVAL
+ */
+int rtc_set_offset(struct rtc_device *rtc, long offset)
+{
+	int ret;
+
+	if (!rtc->ops)
+		return -ENODEV;
+
+	if (!rtc->ops->set_offset)
+		return -EINVAL;
+
+	mutex_lock(&rtc->ops_lock);
+	ret = rtc->ops->set_offset(rtc->dev.parent, offset);
+	mutex_unlock(&rtc->ops_lock);
+	return ret;
+}

drivers/rtc/rtc-as3722.c

@@ -210,7 +210,7 @@ static int as3722_rtc_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "RTC interrupt %d\n", as3722_rtc->alarm_irq);
 
 	ret = devm_request_threaded_irq(&pdev->dev, as3722_rtc->alarm_irq, NULL,
-			as3722_alarm_irq, IRQF_ONESHOT | IRQF_EARLY_RESUME,
+			as3722_alarm_irq, IRQF_ONESHOT,
 			"rtc-alarm", as3722_rtc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",

drivers/rtc/rtc-asm9260.c

+/*
+ * Copyright (C) 2016 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* Miscellaneous registers */
+/* Interrupt Location Register */
+#define HW_ILR			0x00
+#define BM_RTCALF		BIT(1)
+#define BM_RTCCIF		BIT(0)
+
+/* Clock Control Register */
+#define HW_CCR			0x08
+/* Calibration counter disable */
+#define BM_CCALOFF		BIT(4)
+/* Reset internal oscillator divider */
+#define BM_CTCRST		BIT(1)
+/* Clock Enable */
+#define BM_CLKEN		BIT(0)
+
+/* Counter Increment Interrupt Register */
+#define HW_CIIR			0x0C
+#define BM_CIIR_IMYEAR		BIT(7)
+#define BM_CIIR_IMMON		BIT(6)
+#define BM_CIIR_IMDOY		BIT(5)
+#define BM_CIIR_IMDOW		BIT(4)
+#define BM_CIIR_IMDOM		BIT(3)
+#define BM_CIIR_IMHOUR		BIT(2)
+#define BM_CIIR_IMMIN		BIT(1)
+#define BM_CIIR_IMSEC		BIT(0)
+
+/* Alarm Mask Register */
+#define HW_AMR			0x10
+#define BM_AMR_IMYEAR		BIT(7)
+#define BM_AMR_IMMON		BIT(6)
+#define BM_AMR_IMDOY		BIT(5)
+#define BM_AMR_IMDOW		BIT(4)
+#define BM_AMR_IMDOM		BIT(3)
+#define BM_AMR_IMHOUR		BIT(2)
+#define BM_AMR_IMMIN		BIT(1)
+#define BM_AMR_IMSEC		BIT(0)
+#define BM_AMR_OFF		0xff
+
+/* Consolidated time registers */
+#define HW_CTIME0		0x14
+#define BM_CTIME0_DOW_S		24
+#define BM_CTIME0_DOW_M		0x7
+#define BM_CTIME0_HOUR_S	16
+#define BM_CTIME0_HOUR_M	0x1f
+#define BM_CTIME0_MIN_S		8
+#define BM_CTIME0_MIN_M		0x3f
+#define BM_CTIME0_SEC_S		0
+#define BM_CTIME0_SEC_M		0x3f
+
+#define HW_CTIME1		0x18
+#define BM_CTIME1_YEAR_S	16
+#define BM_CTIME1_YEAR_M	0xfff
+#define BM_CTIME1_MON_S		8
+#define BM_CTIME1_MON_M		0xf
+#define BM_CTIME1_DOM_S		0
+#define BM_CTIME1_DOM_M		0x1f
+
+#define HW_CTIME2		0x1C
+#define BM_CTIME2_DOY_S		0
+#define BM_CTIME2_DOY_M		0xfff
+
+/* Time counter registers */
+#define HW_SEC			0x20
+#define HW_MIN			0x24
+#define HW_HOUR			0x28
+#define HW_DOM			0x2C
+#define HW_DOW			0x30
+#define HW_DOY			0x34
+#define HW_MONTH		0x38
+#define HW_YEAR			0x3C
+
+#define HW_CALIBRATION		0x40
+#define BM_CALDIR_BACK		BIT(17)
+#define BM_CALVAL_M		0x1ffff
+
+/* General purpose registers */
+#define HW_GPREG0		0x44
+#define HW_GPREG1		0x48
+#define HW_GPREG2		0x4C
+#define HW_GPREG3		0x50
+#define HW_GPREG4		0x54
+
+/* Alarm register group */
+#define HW_ALSEC		0x60
+#define HW_ALMIN		0x64
+#define HW_ALHOUR		0x68
+#define HW_ALDOM		0x6C
+#define HW_ALDOW		0x70
+#define HW_ALDOY		0x74
+#define HW_ALMON		0x78
+#define HW_ALYEAR		0x7C
+
+struct asm9260_rtc_priv {
+	struct device		*dev;
+	void __iomem		*iobase;
+	struct rtc_device	*rtc;
+	struct clk		*clk;
+	/* io lock */
+	spinlock_t		lock;
+};
+
+static irqreturn_t asm9260_rtc_irq(int irq, void *dev_id)
+{
+	struct asm9260_rtc_priv *priv = dev_id;
+	u32 isr;
+	unsigned long events = 0;
+
+	isr = ioread32(priv->iobase + HW_CIIR);
+	if (!isr)
+		return IRQ_NONE;
+
+	iowrite32(0, priv->iobase + HW_CIIR);
+
+	events |= RTC_AF | RTC_IRQF;
+
+	rtc_update_irq(priv->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+	u32 ctime0, ctime1, ctime2;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&priv->lock, irq_flags);
+	ctime0 = ioread32(priv->iobase + HW_CTIME0);
+	ctime1 = ioread32(priv->iobase + HW_CTIME1);
+	ctime2 = ioread32(priv->iobase + HW_CTIME2);
+
+	if (ctime1 != ioread32(priv->iobase + HW_CTIME1)) {
+		/*
+		 * woops, counter flipped right now. Now we are safe
+		 * to reread.
+		 */
+		ctime0 = ioread32(priv->iobase + HW_CTIME0);
+		ctime1 = ioread32(priv->iobase + HW_CTIME1);
+		ctime2 = ioread32(priv->iobase + HW_CTIME2);
+	}
+	spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+	tm->tm_sec  = (ctime0 >> BM_CTIME0_SEC_S)  & BM_CTIME0_SEC_M;
+	tm->tm_min  = (ctime0 >> BM_CTIME0_MIN_S)  & BM_CTIME0_MIN_M;
+	tm->tm_hour = (ctime0 >> BM_CTIME0_HOUR_S) & BM_CTIME0_HOUR_M;
+	tm->tm_wday = (ctime0 >> BM_CTIME0_DOW_S)  & BM_CTIME0_DOW_M;
+
+	tm->tm_mday = (ctime1 >> BM_CTIME1_DOM_S)  & BM_CTIME1_DOM_M;
+	tm->tm_mon  = (ctime1 >> BM_CTIME1_MON_S)  & BM_CTIME1_MON_M;
+	tm->tm_year = (ctime1 >> BM_CTIME1_YEAR_S) & BM_CTIME1_YEAR_M;
+
+	tm->tm_yday = (ctime2 >> BM_CTIME2_DOY_S)  & BM_CTIME2_DOY_M;
+
+	return 0;
+}
+
+static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&priv->lock, irq_flags);
+	/*
+	 * make sure SEC counter will not flip other counter on write time,
+	 * real value will be written at the enf of sequence.
+	 */
+	iowrite32(0, priv->iobase + HW_SEC);
+
+	iowrite32(tm->tm_year, priv->iobase + HW_YEAR);
+	iowrite32(tm->tm_mon,  priv->iobase + HW_MONTH);
+	iowrite32(tm->tm_mday, priv->iobase + HW_DOM);
+	iowrite32(tm->tm_wday, priv->iobase + HW_DOW);
+	iowrite32(tm->tm_yday, priv->iobase + HW_DOY);
+	iowrite32(tm->tm_hour, priv->iobase + HW_HOUR);
+	iowrite32(tm->tm_min,  priv->iobase + HW_MIN);
+	iowrite32(tm->tm_sec,  priv->iobase + HW_SEC);
+	spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+	return 0;
+}
+
+static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&priv->lock, irq_flags);
+	alrm->time.tm_year = ioread32(priv->iobase + HW_ALYEAR);
+	alrm->time.tm_mon  = ioread32(priv->iobase + HW_ALMON);
+	alrm->time.tm_mday = ioread32(priv->iobase + HW_ALDOM);
+	alrm->time.tm_wday = ioread32(priv->iobase + HW_ALDOW);
+	alrm->time.tm_yday = ioread32(priv->iobase + HW_ALDOY);
+	alrm->time.tm_hour = ioread32(priv->iobase + HW_ALHOUR);
+	alrm->time.tm_min  = ioread32(priv->iobase + HW_ALMIN);
+	alrm->time.tm_sec  = ioread32(priv->iobase + HW_ALSEC);
+
+	alrm->enabled = ioread32(priv->iobase + HW_AMR) ? 1 : 0;
+	alrm->pending = ioread32(priv->iobase + HW_CIIR) ? 1 : 0;
+	spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int asm9260_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&priv->lock, irq_flags);
+	iowrite32(alrm->time.tm_year, priv->iobase + HW_ALYEAR);
+	iowrite32(alrm->time.tm_mon,  priv->iobase + HW_ALMON);
+	iowrite32(alrm->time.tm_mday, priv->iobase + HW_ALDOM);
+	iowrite32(alrm->time.tm_wday, priv->iobase + HW_ALDOW);
+	iowrite32(alrm->time.tm_yday, priv->iobase + HW_ALDOY);
+	iowrite32(alrm->time.tm_hour, priv->iobase + HW_ALHOUR);
+	iowrite32(alrm->time.tm_min,  priv->iobase + HW_ALMIN);
+	iowrite32(alrm->time.tm_sec,  priv->iobase + HW_ALSEC);
+
+	iowrite32(alrm->enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+	spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+	return 0;
+}
+
+static int asm9260_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+	iowrite32(enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+	return 0;
+}
+
+static const struct rtc_class_ops asm9260_rtc_ops = {
+	.read_time		= asm9260_rtc_read_time,
+	.set_time		= asm9260_rtc_set_time,
+	.read_alarm		= asm9260_rtc_read_alarm,
+	.set_alarm		= asm9260_rtc_set_alarm,
+	.alarm_irq_enable	= asm9260_alarm_irq_enable,
+};
+
+static int __init asm9260_rtc_probe(struct platform_device *pdev)
+{
+	struct asm9260_rtc_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	int irq_alarm, ret;
+	u32 ccr;
+
+	priv = devm_kzalloc(dev, sizeof(struct asm9260_rtc_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	platform_set_drvdata(pdev, priv);
+
+	irq_alarm = platform_get_irq(pdev, 0);
+	if (irq_alarm < 0) {
+		dev_err(dev, "No alarm IRQ resource defined\n");
+		return irq_alarm;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->iobase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->iobase))
+		return PTR_ERR(priv->iobase);
+
+	priv->clk = devm_clk_get(dev, "ahb");
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clk!\n");
+		return ret;
+	}
+
+	ccr = ioread32(priv->iobase + HW_CCR);
+	/* if dev is not enabled, reset it */
+	if ((ccr & (BM_CLKEN | BM_CTCRST)) != BM_CLKEN) {
+		iowrite32(BM_CTCRST, priv->iobase + HW_CCR);
+		ccr = 0;
+	}
+
+	iowrite32(BM_CLKEN | ccr, priv->iobase + HW_CCR);
+	iowrite32(0, priv->iobase + HW_CIIR);
+	iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+
+	priv->rtc = devm_rtc_device_register(dev, dev_name(dev),
+					     &asm9260_rtc_ops, THIS_MODULE);
+	if (IS_ERR(priv->rtc)) {
+		ret = PTR_ERR(priv->rtc);
+		dev_err(dev, "Failed to register RTC device: %d\n", ret);
+		goto err_return;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq_alarm, NULL,
+					asm9260_rtc_irq, IRQF_ONESHOT,
+					dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "can't get irq %i, err %d\n",
+			irq_alarm, ret);
+		goto err_return;
+	}
+
+	return 0;
+
+err_return:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int __exit asm9260_rtc_remove(struct platform_device *pdev)
+{
+	struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev);
+
+	/* Disable alarm matching */
+	iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+static const struct of_device_id asm9260_dt_ids[] = {
+	{ .compatible = "alphascale,asm9260-rtc", },
+	{}
+};
+
+static struct platform_driver asm9260_rtc_driver = {
+	.probe		= asm9260_rtc_probe,
+	.remove		= asm9260_rtc_remove,
+	.driver		= {
+		.name	= "asm9260-rtc",
+		.owner	= THIS_MODULE,
+		.of_match_table = asm9260_dt_ids,
+	},
+};
+
+module_platform_driver(asm9260_rtc_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_DESCRIPTION("Alphascale asm9260 SoC Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");

drivers/rtc/rtc-ds1305.c

@@ -532,7 +532,7 @@ ds1305_nvram_read(struct file *filp, struct kobject *kobj,
 	struct spi_transfer	x[2];
 	int			status;
 
-	spi = container_of(kobj, struct spi_device, dev.kobj);
+	spi = to_spi_device(kobj_to_dev(kobj));
 
 	addr = DS1305_NVRAM + off;
 	msg_init(&m, x, &addr, count, NULL, buf);
@@ -554,7 +554,7 @@ ds1305_nvram_write(struct file *filp, struct kobject *kobj,
 	struct spi_transfer	x[2];
 	int			status;
 
-	spi = container_of(kobj, struct spi_device, dev.kobj);
+	spi = to_spi_device(kobj_to_dev(kobj));
 
 	addr = (DS1305_WRITE | DS1305_NVRAM) + off;
 	msg_init(&m, x, &addr, count, buf, NULL);

drivers/rtc/rtc-ds1685.c

@@ -187,9 +187,9 @@ ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
  * Only use this where you are certain another lock will not be held.
  */
 static inline void
-ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
+ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long *flags)
 {
-	spin_lock_irqsave(&rtc->lock, flags);
+	spin_lock_irqsave(&rtc->lock, *flags);
 	ds1685_rtc_switch_to_bank1(rtc);
 }
 
@@ -1300,7 +1300,7 @@ ds1685_rtc_sysfs_ctrl_regs_store(struct device *dev,
 {
 	struct ds1685_priv *rtc = dev_get_drvdata(dev);
 	u8 reg = 0, bit = 0, tmp;
-	unsigned long flags = 0;
+	unsigned long flags;
 	long int val = 0;
 	const struct ds1685_rtc_ctrl_regs *reg_info =
 		ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
@@ -1321,7 +1321,7 @@ ds1685_rtc_sysfs_ctrl_regs_store(struct device *dev,
 	bit = reg_info->bit;
 
 	/* Safe to spinlock during a write. */
-	ds1685_rtc_begin_ctrl_access(rtc, flags);
+	ds1685_rtc_begin_ctrl_access(rtc, &flags);
 	tmp = rtc->read(rtc, reg);
 	rtc->write(rtc, reg, (val ? (tmp | bit) : (tmp & ~(bit))));
 	ds1685_rtc_end_ctrl_access(rtc, flags);
@@ -2161,6 +2161,7 @@ ds1685_rtc_poweroff(struct platform_device *pdev)
 	/* Check for valid RTC data, else, spin forever. */
 	if (unlikely(!pdev)) {
 		pr_emerg("platform device data not available, spinning forever ...\n");
+		while(1);
 		unreachable();
 	} else {
 		/* Get the rtc data. */

drivers/rtc/rtc-ds3234.c

-/* rtc-ds3234.c
- *
- * Driver for Dallas Semiconductor (DS3234) SPI RTC with Integrated Crystal
- * and SRAM.
- *
- * Copyright (C) 2008 MIMOMax Wireless Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/spi/spi.h>
-#include <linux/bcd.h>
-
-#define DS3234_REG_SECONDS	0x00
-#define DS3234_REG_MINUTES	0x01
-#define DS3234_REG_HOURS	0x02
-#define DS3234_REG_DAY		0x03
-#define DS3234_REG_DATE		0x04
-#define DS3234_REG_MONTH	0x05
-#define DS3234_REG_YEAR		0x06
-#define DS3234_REG_CENTURY	(1 << 7) /* Bit 7 of the Month register */
-
-#define DS3234_REG_CONTROL	0x0E
-#define DS3234_REG_CONT_STAT	0x0F
-
-static int ds3234_set_reg(struct device *dev, unsigned char address,
-				unsigned char data)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	unsigned char buf[2];
-
-	/* MSB must be '1' to indicate write */
-	buf[0] = address | 0x80;
-	buf[1] = data;
-
-	return spi_write_then_read(spi, buf, 2, NULL, 0);
-}
-
-static int ds3234_get_reg(struct device *dev, unsigned char address,
-				unsigned char *data)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	*data = address & 0x7f;
-
-	return spi_write_then_read(spi, data, 1, data, 1);
-}
-
-static int ds3234_read_time(struct device *dev, struct rtc_time *dt)
-{
-	int err;
-	unsigned char buf[8];
-	struct spi_device *spi = to_spi_device(dev);
-
-	buf[0] = 0x00; /* Start address */
-
-	err = spi_write_then_read(spi, buf, 1, buf, 8);
-	if (err != 0)
-		return err;
-
-	/* Seconds, Minutes, Hours, Day, Date, Month, Year */
-	dt->tm_sec	= bcd2bin(buf[0]);
-	dt->tm_min	= bcd2bin(buf[1]);
-	dt->tm_hour	= bcd2bin(buf[2] & 0x3f);
-	dt->tm_wday	= bcd2bin(buf[3]) - 1; /* 0 = Sun */
-	dt->tm_mday	= bcd2bin(buf[4]);
-	dt->tm_mon	= bcd2bin(buf[5] & 0x1f) - 1; /* 0 = Jan */
-	dt->tm_year	= bcd2bin(buf[6] & 0xff) + 100; /* Assume 20YY */
-
-	return rtc_valid_tm(dt);
-}
-
-static int ds3234_set_time(struct device *dev, struct rtc_time *dt)
-{
-	ds3234_set_reg(dev, DS3234_REG_SECONDS, bin2bcd(dt->tm_sec));
-	ds3234_set_reg(dev, DS3234_REG_MINUTES, bin2bcd(dt->tm_min));
-	ds3234_set_reg(dev, DS3234_REG_HOURS, bin2bcd(dt->tm_hour) & 0x3f);
-
-	/* 0 = Sun */
-	ds3234_set_reg(dev, DS3234_REG_DAY, bin2bcd(dt->tm_wday + 1));
-	ds3234_set_reg(dev, DS3234_REG_DATE, bin2bcd(dt->tm_mday));
-
-	/* 0 = Jan */
-	ds3234_set_reg(dev, DS3234_REG_MONTH, bin2bcd(dt->tm_mon + 1));
-
-	/* Assume 20YY although we just want to make sure not to go negative. */
-	if (dt->tm_year > 100)
-		dt->tm_year -= 100;
-
-	ds3234_set_reg(dev, DS3234_REG_YEAR, bin2bcd(dt->tm_year));
-
-	return 0;
-}
-
-static const struct rtc_class_ops ds3234_rtc_ops = {
-	.read_time	= ds3234_read_time,
-	.set_time	= ds3234_set_time,
-};
-
-static int ds3234_probe(struct spi_device *spi)
-{
-	struct rtc_device *rtc;
-	unsigned char tmp;
-	int res;
-
-	spi->mode = SPI_MODE_3;
-	spi->bits_per_word = 8;
-	spi_setup(spi);
-
-	res = ds3234_get_reg(&spi->dev, DS3234_REG_SECONDS, &tmp);
-	if (res != 0)
-		return res;
-
-	/* Control settings
-	 *
-	 * CONTROL_REG
-	 * BIT 7	6	5	4	3	2	1	0
-	 *     EOSC	BBSQW	CONV	RS2	RS1	INTCN	A2IE	A1IE
-	 *
-	 *     0	0	0	1	1	1	0	0
-	 *
-	 * CONTROL_STAT_REG
-	 * BIT 7	6	5	4	3	2	1	0
-	 *     OSF	BB32kHz	CRATE1	CRATE0	EN32kHz	BSY	A2F	A1F
-	 *
-	 *     1	0	0	0	1	0	0	0
-	 */
-	ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp);
-	ds3234_set_reg(&spi->dev, DS3234_REG_CONTROL, tmp & 0x1c);
-
-	ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp);
-	ds3234_set_reg(&spi->dev, DS3234_REG_CONT_STAT, tmp & 0x88);
-
-	/* Print our settings */
-	ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp);
-	dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
-
-	ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp);
-	dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
-
-	rtc = devm_rtc_device_register(&spi->dev, "ds3234",
-				&ds3234_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
-
-	spi_set_drvdata(spi, rtc);
-
-	return 0;
-}
-
-static struct spi_driver ds3234_driver = {
-	.driver = {
-		.name	 = "ds3234",
-	},
-	.probe	 = ds3234_probe,
-};
-
-module_spi_driver(ds3234_driver);
-
-MODULE_DESCRIPTION("DS3234 SPI RTC driver");
-MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:ds3234");

drivers/rtc/rtc-generic.c

@@ -9,6 +9,8 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 
+#if defined(CONFIG_M68K) || defined(CONFIG_PARISC) || \
+    defined(CONFIG_PPC) || defined(CONFIG_SUPERH32)
 #include <asm/rtc.h>
 
 static int generic_get_time(struct device *dev, struct rtc_time *tm)
@@ -33,13 +35,21 @@ static const struct rtc_class_ops generic_rtc_ops = {
 	.read_time = generic_get_time,
 	.set_time = generic_set_time,
 };
+#else
+#define generic_rtc_ops *(struct rtc_class_ops*)NULL
+#endif
 
 static int __init generic_rtc_probe(struct platform_device *dev)
 {
 	struct rtc_device *rtc;
+	const struct rtc_class_ops *ops;
+
+	ops = dev_get_platdata(&dev->dev);
+	if (!ops)
+		ops = &generic_rtc_ops;
 
 	rtc = devm_rtc_device_register(&dev->dev, "rtc-generic",
-					&generic_rtc_ops, THIS_MODULE);
+					ops, THIS_MODULE);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 

drivers/rtc/rtc-hym8563.c

@@ -144,7 +144,7 @@ static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	 * it does not seem to carry it over a subsequent write/read.
 	 * So we'll limit ourself to 100 years, starting at 2000 for now.
 	 */
-	buf[6] = tm->tm_year - 100;
+	buf[6] = bin2bcd(tm->tm_year - 100);
 
 	/*
 	 * CTL1 only contains TEST-mode bits apart from stop,

drivers/rtc/rtc-mt6397.c

@@ -419,4 +419,3 @@ module_platform_driver(mtk_rtc_driver);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>");
 MODULE_DESCRIPTION("RTC Driver for MediaTek MT6397 PMIC");
-MODULE_ALIAS("platform:mt6397-rtc");

drivers/rtc/rtc-palmas.c

@@ -311,8 +311,7 @@ static int palmas_rtc_probe(struct platform_device *pdev)
 
 	ret = devm_request_threaded_irq(&pdev->dev, palmas_rtc->irq, NULL,
 			palmas_rtc_interrupt,
-			IRQF_TRIGGER_LOW | IRQF_ONESHOT |
-			IRQF_EARLY_RESUME,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 			dev_name(&pdev->dev), palmas_rtc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "IRQ request failed, err = %d\n", ret);

drivers/rtc/rtc-pcf8523.c

@@ -178,28 +178,8 @@ static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	if (err < 0)
 		return err;
 
-	if (regs[0] & REG_SECONDS_OS) {
-		/*
-		 * If the oscillator was stopped, try to clear the flag. Upon
-		 * power-up the flag is always set, but if we cannot clear it
-		 * the oscillator isn't running properly for some reason. The
-		 * sensible thing therefore is to return an error, signalling
-		 * that the clock cannot be assumed to be correct.
-		 */
-
-		regs[0] &= ~REG_SECONDS_OS;
-
-		err = pcf8523_write(client, REG_SECONDS, regs[0]);
-		if (err < 0)
-			return err;
-
-		err = pcf8523_read(client, REG_SECONDS, &regs[0]);
-		if (err < 0)
-			return err;
-
-		if (regs[0] & REG_SECONDS_OS)
-			return -EAGAIN;
-	}
+	if (regs[0] & REG_SECONDS_OS)
+		return -EINVAL;
 
 	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
 	tm->tm_min = bcd2bin(regs[1] & 0x7f);
@@ -235,6 +215,7 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		return err;
 
 	regs[0] = REG_SECONDS;
+	/* This will purposely overwrite REG_SECONDS_OS */
 	regs[1] = bin2bcd(tm->tm_sec);
 	regs[2] = bin2bcd(tm->tm_min);
 	regs[3] = bin2bcd(tm->tm_hour);

drivers/rtc/rtc-rx8025.c

@@ -65,7 +65,6 @@
 
 static const struct i2c_device_id rx8025_id[] = {
 	{ "rx8025", 0 },
-	{ "rv8803", 1 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rx8025_id);
@@ -147,8 +146,10 @@ static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
 	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+	struct mutex *lock = &rx8025->rtc->ops_lock;
 	int status;
 
+	mutex_lock(lock);
 	status = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (status < 0)
 		goto out;
@@ -173,6 +174,8 @@ static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
 	}
 
 out:
+	mutex_unlock(lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -341,7 +344,17 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	if (client->irq <= 0)
 		return -EINVAL;
 
-	/* Hardware alarm precision is 1 minute! */
+	/*
+	 * Hardware alarm precision is 1 minute!
+	 * round up to nearest minute
+	 */
+	if (t->time.tm_sec) {
+		time64_t alarm_time = rtc_tm_to_time64(&t->time);
+
+		alarm_time += 60 - t->time.tm_sec;
+		rtc_time64_to_tm(alarm_time, &t->time);
+	}
+
 	ald[0] = bin2bcd(t->time.tm_min);
 	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
 		ald[1] = bin2bcd(t->time.tm_hour);
@@ -539,8 +552,9 @@ static int rx8025_probe(struct i2c_client *client,
 	if (client->irq > 0) {
 		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
 		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-						rx8025_handle_irq, 0, "rx8025",
-						client);
+						rx8025_handle_irq,
+						IRQF_ONESHOT,
+						"rx8025", client);
 		if (err) {
 			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
 			client->irq = 0;
@@ -549,6 +563,9 @@ static int rx8025_probe(struct i2c_client *client,
 
 	rx8025->rtc->max_user_freq = 1;
 
+	/* the rx8025 alarm only supports a minute accuracy */
+	rx8025->rtc->uie_unsupported = 1;
+
 	err = rx8025_sysfs_register(&client->dev);
 	return err;
 }

drivers/rtc/rtc-tps6586x.c

@@ -286,7 +286,7 @@ static int tps6586x_rtc_probe(struct platform_device *pdev)
 
 	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
 				tps6586x_rtc_irq,
-				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				IRQF_ONESHOT,
 				dev_name(&pdev->dev), rtc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "request IRQ(%d) failed with ret %d\n",

drivers/rtc/rtc-tps65910.c

@@ -268,7 +268,7 @@ static int tps65910_rtc_probe(struct platform_device *pdev)
 	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-		tps65910_rtc_interrupt, IRQF_TRIGGER_LOW | IRQF_EARLY_RESUME,
+		tps65910_rtc_interrupt, IRQF_TRIGGER_LOW,
 		dev_name(&pdev->dev), &pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "IRQ is not free.\n");

drivers/rtc/rtc-tps80031.c

@@ -287,7 +287,7 @@ static int tps80031_rtc_probe(struct platform_device *pdev)
 
 	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
 			tps80031_rtc_irq,
-			IRQF_ONESHOT | IRQF_EARLY_RESUME,
+			IRQF_ONESHOT,
 			dev_name(&pdev->dev), rtc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "request IRQ:%d failed, err = %d\n",