Merge tag 'omap-for-v4.14/dt-v3-signed' of...

Merge tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Device tree changes for omaps for v4.14 merge window" from Tony Lindgren:

- A series of changes for dra7 and am572 to use generic
  MMC vqmmc regulator

- Clean-up tps65217 internal interrupts to define them
  only in tps65217.dtsi

- Add dra7 iodelay pinctrl driver configuration

- Add buzzer support for am437x-gp-evm

- Disable HDMI CEC internal pull-ups as it seems that
  all boards have an external pull for these

- Remove unnecessary interrupt-parent for omap3

- Configure droid 4 vaudio regulator initial mode and
  add vibrator

- Enable NAND dma prefetch for am335x-evm, am437x and dra7

- Add pcie1 dt node for EP mode for am57x and dra7

- Add support for new dra76x SoCs and dra76x-evm

* tag 'omap-for-v4.14/dt-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  ARM: dts: nokia n900: update dts with camera support
  ARM: dts: Add support for dra76-evm
  ARM: dts: Add support for dra76x family of devices
  ARM: dts: DRA7: Add pcie1 dt node for EP mode
  ARM: dts: am335x: add support for Moxa UC-8100-ME-T open platform
  ARM: dts: dra7xx: Enable NAND dma prefetch by default
  ARM: dts: am437xx: Enable NAND dma prefetch by default
  ARM: dts: am335x-evm: Enable NAND dma prefetch by default
  ARM: dts: omap4-droid4: Add vibrator
  ARM: dts: motorola-cpcap-mapphone: set initial mode for vaudio
  ARM: dts: omap3: Remove needless interrupt-parent property
  ARM: dts: Disable HDMI CEC internal pull-ups
  ARM: dts: am437x-gp-evm: Add support for buzzer
  ARM: dts: Add dra7 iodelay configuration
  ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file
  ARM: dts: tps65217: Add charger interrupts to the common tps65217.dtsi file
  ARM: dts: omap*: Replace deprecated "vmmc_aux" with "vqmmc"
  ARM: dts: am572x-idk: Fix GPIO polarity for MMC1 card detect
  ARM: dts: am571x-idk: Fix GPIO polarity for MMC1 card detect
  ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -154,6 +154,9 @@ Boards:
 - AM335X phyCORE-AM335x: Development kit
   compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"
 
+- AM335X UC-8100-ME-T: Communication-centric industrial computing platform
+  compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
@@ -184,6 +187,9 @@ Boards:
 - AM5718 IDK
   compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
 
+- DRA762 EVM:  Software Development Board for DRA762
+  compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 

arch/arm/boot/dts/Makefile

@@ -618,6 +618,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-evmsk.dtb \
 	am335x-icev2.dtb \
 	am335x-lxm.dtb \
+	am335x-moxa-uc-8100-me-t.dtb \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
@@ -658,7 +659,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	dra7-evm.dtb \
 	dra72-evm.dtb \
 	dra72-evm-revc.dtb \
-	dra71-evm.dtb
+	dra71-evm.dtb \
+	dra76-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-kuroboxpro.dtb \
 	orion5x-lacie-d2-network.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -319,13 +319,10 @@ &tps {
 	ti,pmic-shutdown-controller;
 
 	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
 		status = "okay";
 	};
 
 	pwrbutton {
-		interrupts = <2>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -191,13 +191,10 @@ &tps {
 	interrupts = <7>; /* NNMI */
 
 	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
 		status = "okay";
 	};
 
 	pwrbutton {
-		interrupts = <2>;
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-evm.dts

@@ -531,6 +531,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -149,6 +149,13 @@ sound0_master: simple-audio-card,codec {
 			system-clock-frequency = <12000000>;
 		};
 	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&beeper_pins>;
+		gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &am43xx_pinmux {
@@ -510,6 +517,13 @@ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
 			AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
+
+	beeper_pins: beeper_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
 };
 
 &uart0 {
@@ -842,6 +856,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -564,6 +564,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;

arch/arm/boot/dts/am571x-idk.dts

@@ -68,7 +68,7 @@ &mmc1 {
 	status = "okay";
 	vmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &omap_dwc3_2 {
@@ -96,3 +96,12 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 		status = "okay";
 	};
 };
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/am572x-idk.dts

@@ -79,16 +79,21 @@ &extcon_usb2 {
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&v3_3d>;
-	vmmc_aux-supply = <&ldo1_reg>;
+	vqmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &sn65hvs882 {
 	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1 {
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -570,7 +570,12 @@ hdmi_out: endpoint {
 	};
 };
 
-&pcie1 {
+&pcie1_rc {
+	status = "ok";
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_ep {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 

arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts

@@ -20,7 +20,7 @@ &tpd12s015 {
 
 &mmc1 {
 	vmmc-supply = <&vdd_3v3>;
-	vmmc-aux-supply = <&ldo1_reg>;
+	vqmmc-supply = <&ldo1_reg>;
 };
 
 /* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */

arch/arm/boot/dts/dra7-evm-common.dtsi

+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+};
+
+&mcspi2 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/dra7-evm.dts

@@ -8,9 +8,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
-#include <dt-bindings/input/input.h>
+#include "dra7-evm-common.dtsi"
 
 / {
 	model = "TI DRA742";
@@ -21,8 +19,12 @@ memory@0 {
 		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
 
-	chosen {
-		stdout-path = &uart1;
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	evm_3v3_sd: fixedregulator-sd {
@@ -51,11 +53,6 @@ aic_dvdd: fixedregulator-aic_dvdd {
 		regulator-max-microvolt = <1800000>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
@@ -73,85 +70,6 @@ vtt_fixed: fixedregulator-vtt {
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
 
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DRA7xx-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"Line Out",		"LLOUT",
-			"Line Out",		"RLOUT",
-			"MIC3L",		"Mic Jack",
-			"MIC3R",		"Mic Jack",
-			"Mic Jack",		"Mic Bias",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		sound0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-			system-clock-frequency = <5644800>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			clocks = <&atl_clkin2_ck>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "dra7:usr1";
-			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "dra7:usr2";
-			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "dra7:usr3";
-			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "dra7:usr4";
-			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		USER1 {
-			label = "btnUser1";
-			linux,code = <BTN_0>;
-			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
-		};
-
-		USER2 {
-			label = "btnUser2";
-			linux,code = <BTN_1>;
-			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &dra7_pmx_core {
@@ -406,39 +324,12 @@ p1 {
 	};
 };
 
-&i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-};
-
-&mcspi2 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3e0>;
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
 &mmc1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&evm_3v3_sd>;
-	vmmc_aux-supply = <&ldo1_reg>;
+	vqmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
 	/*
 	 * SDCD signal is not being used here - using the fact that GPIO mode
@@ -451,7 +342,7 @@ &mmc2 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_default>;
-	vmmc-supply = <&evm_3v3_sw>;
+	vmmc-supply = <&evm_1v8_sw>;
 	bus-width = <8>;
 };
 
@@ -459,84 +350,10 @@ &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
 
-&qspi {
-	status = "okay";
-
-	spi-max-frequency = <76800000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <76800000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
 
-&usb1 {
-	dr_mode = "otg";
-	extcon = <&extcon_usb1>;
-};
-
-&usb2 {
-	dr_mode = "host";
-};
-
 &elm {
 	status = "okay";
 };
@@ -556,6 +373,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -666,57 +484,6 @@ &dcan1 {
 	pinctrl-2 = <&dcan1_pins_default>;
 };
 
-&atl {
-	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_gfclk_mux>,
-			  <&dpll_abe_ck>,
-			  <&dpll_abe_m2x2_ck>,
-			  <&atl_clkin2_ck>;
-	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
-	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
+&pcie1_rc {
 	status = "okay";
-
-	atl2 {
-		bws = <DRA7_ATL_WS_MCASP2_FSX>;
-		aws = <DRA7_ATL_WS_MCASP3_FSX>;
-	};
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-
-	assigned-clocks = <&mcasp3_ahclkx_mux>;
-	assigned-clock-parents = <&atl_clkin2_ck>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -196,6 +196,7 @@ dra7_pmx_core: pinmux@1400 {
 				scm_conf1: scm_conf@1c04 {
 					compatible = "syscon";
 					reg = <0x1c04 0x0020>;
+					#syscon-cells = <2>;
 				};
 
 				scm_conf_pcie: scm_conf@1c24 {
@@ -287,7 +288,11 @@ axi@0 {
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
-			pcie1: pcie@51000000 {
+			/**
+			 * To enable PCI endpoint mode, disable the pcie1_rc
+			 * node and enable pcie1_ep mode.
+			 */
+			pcie1_rc: pcie@51000000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -309,12 +314,28 @@ pcie1: pcie@51000000 {
 						<0 0 0 2 &pcie1_intc 2>,
 						<0 0 0 3 &pcie1_intc 3>,
 						<0 0 0 4 &pcie1_intc 4>;
+				status = "disabled";
 				pcie1_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;
 					#interrupt-cells = <1>;
 				};
 			};
+
+			pcie1_ep: pcie_ep@51000000 {
+				compatible = "ti,dra7-pcie-ep";
+				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+				interrupts = <0 232 0x4>;
+				num-lanes = <1>;
+				num-ib-windows = <4>;
+				num-ob-windows = <16>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				status = "disabled";
+			};
 		};
 
 		axi@1 {
@@ -418,6 +439,14 @@ dsp1_system: dsp_system@40d00000 {
 			reg = <0x40d00000 0x100>;
 		};
 
+		dra7_iodelay_core: padconf@4844a000 {
+			compatible = "ti,dra7-iodelay";
+			reg = <0x4844a000 0x0d1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1037,6 +1066,7 @@ mmc1: mmc@4809c000 {
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
+			max-frequency = <192000000>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -1048,6 +1078,7 @@ mmc2: mmc@480b4000 {
 			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			max-frequency = <192000000>;
 		};
 
 		mmc3: mmc@480ad000 {
@@ -1059,6 +1090,8 @@ mmc3: mmc@480ad000 {
 			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+			max-frequency = <64000000>;
 		};
 
 		mmc4: mmc@480d1000 {
@@ -1070,6 +1103,7 @@ mmc4: mmc@480d1000 {
 			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			max-frequency = <192000000>;
 		};
 
 		mmu0_dsp1: mmu@40d01000 {

arch/arm/boot/dts/dra71-evm.dts

@@ -32,6 +32,16 @@ vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
 			  3000000 0x1>;
 	};
 
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&lp8732_buck0_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	poweroff: gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -162,7 +172,11 @@ p0 {
 };
 
 &mmc1 {
-	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+	vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
 };
 
 &mac {

arch/arm/boot/dts/dra72-evm-common.dtsi

@@ -311,6 +311,7 @@ nand@0,0 {
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -419,8 +420,6 @@ &mmc2 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 	ti,non-removable;
 	max-frequency = <192000000>;
@@ -564,3 +563,7 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 		status = "okay";
 	};
 };
+
+&pcie1_rc {
+	status = "okay";
+};

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -15,6 +15,16 @@ memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &i2c1 {
@@ -82,3 +92,11 @@ dp83867_1: ethernet-phy@3 {
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
+
+&mmc1 {
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
+};

arch/arm/boot/dts/dra72-evm-tps65917.dtsi

@@ -146,5 +146,5 @@ &dss {
 };
 
 &mmc1 {
-	vmmc_aux-supply = <&ldo1_reg>;
+	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/dra72-evm.dts

@@ -13,6 +13,16 @@ memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &i2c1 {
@@ -43,3 +53,11 @@ &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
+
+&mmc1 {
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	vmmc-supply = <&evm_1v8_sw>;
+};

arch/arm/boot/dts/dra76x.dtsi

+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};

arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi

@@ -255,5 +255,6 @@ vaudio: VAUDIO {
 		regulator-min-microvolt = <2775000>;
 		regulator-max-microvolt = <2775000>;
 		regulator-enable-ramp-delay = <1000>;
+		regulator-initial-mode = <0x00>; /* NORMAL */
 	};
 };

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -299,7 +299,7 @@ &i2c3 {
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <8>;
 };
 

arch/arm/boot/dts/omap3-beagle.dts

@@ -283,7 +283,7 @@ &i2c3 {
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <8>;
 };
 

arch/arm/boot/dts/omap3-cm-t3517.dts

@@ -129,7 +129,7 @@ &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
+	vqmmc-supply = <&wl12xx_vaux2>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;

arch/arm/boot/dts/omap3-cm-t3730.dts

@@ -69,7 +69,7 @@ &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
+	vqmmc-supply = <&wl12xx_vaux2>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;

arch/arm/boot/dts/omap3-devkit8000-common.dtsi

@@ -149,7 +149,7 @@ &i2c3 {
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <8>;
 };
 

arch/arm/boot/dts/omap3-evm-common.dtsi

@@ -115,7 +115,7 @@ tsc2046@0 {
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <8>;
 };
 

arch/arm/boot/dts/omap3-n900.dts

@@ -144,6 +144,15 @@ battery: n900-battery {
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
+	rear_camera: camera@0 {
+		compatible = "linux,camera";
+
+		module {
+			model = "TCM8341MD";
+			sensor = <&cam1>;
+		};
+	};
+
 	pwm9: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
@@ -164,6 +173,31 @@ vctcxo: vctcxo {
 	};
 };
 
+&isp {
+	vdds_csib-supply = <&vaux2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_pins>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			csi_isp: endpoint {
+				remote-endpoint = <&csi_cam1>;
+				bus-type = <3>; /* CCP2 */
+				clock-lanes = <1>;
+				data-lanes = <0>;
+				lane-polarity = <0 0>;
+				clock-inv = <0>;
+				/* Select strobe = <1> for back camera, <0> for front camera */
+				strobe = <1>;
+				crc = <0>;
+			};
+		};
+	};
+};
+
 &omap3_pmx_core {
 	pinctrl-names = "default";
 
@@ -328,6 +362,22 @@ modem_pins: pinmux_modem {
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
 		>;
 	};
+
+	camera_pins: pinmux_camera {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)       /* cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)       /* cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0)       /* cam_xclka */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7)       /* cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)        /* cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)        /* cam_d7 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0)        /* cam_d8 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0)        /* cam_d9 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7)       /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7)       /* cam_xclkb */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0)       /* cam_strobe */
+		>;
+	};
 };
 
 &i2c1 {
@@ -726,6 +776,40 @@ lis302dl: lis3lv02d@1d {
 		st,max-limit-y = <32>;
 		st,max-limit-z = <32>;
 	};
+
+	cam1: camera@3e {
+		compatible = "toshiba,et8ek8";
+		reg = <0x3e>;
+
+		vana-supply = <&vaux4>;
+
+		clocks = <&isp 0>;
+		clock-names = "extclk";
+		clock-frequency = <9600000>;
+
+		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+		port {
+			csi_cam1: endpoint {
+				bus-type = <3>; /* CCP2 */
+				strobe = <1>;
+				clock-inv = <0>;
+				crc = <1>;
+
+				remote-endpoint = <&csi_isp>;
+			};
+		};
+	};
+
+	/* D/A converter for auto-focus */
+	ad5820: dac@0c {
+		compatible = "adi,ad5820";
+		reg = <0x0c>;
+
+		VANA-supply = <&vaux4>;
+
+		#io-channel-cells = <0>;
+	};
 };
 
 &mmc1 {
@@ -733,6 +817,9 @@ &mmc1 {
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
+	/* For debugging, it is often good idea to remove this GPIO.
+	   It means you can remove back cover (to reboot by removing
+	   battery) and still use the MMC card. */
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };
 
@@ -741,7 +828,7 @@ &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&vaux3>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
 	no-sdio;

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -181,7 +181,7 @@ &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&w3cbw003c_npoweron>;
-	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+	vqmmc-supply = <&w3cbw003c_wifi_nreset>;
 	bus-width = <4>;
 	cap-sdio-irq;
 	non-removable;

arch/arm/boot/dts/omap3-tao3530.dtsi

@@ -223,7 +223,7 @@ &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 };

arch/arm/boot/dts/omap3-zoom3.dts

@@ -174,7 +174,7 @@ &twl_gpio {
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;

arch/arm/boot/dts/omap3.dtsi

@@ -713,14 +713,12 @@ usbhshost: usbhshost@48064000 {
 			usbhsohci: ohci@48064400 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
-				interrupt-parent = <&intc>;
 				interrupts = <76>;
 			};
 
 			usbhsehci: ehci@48064800 {
 				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
-				interrupt-parent = <&intc>;
 				interrupts = <77>;
 			};
 		};
@@ -831,7 +829,6 @@ ssi_port1: ssi-port@4805a000 {
 				reg-names = "tx",
 					    "rx";
 
-				interrupt-parent = <&intc>;
 				interrupts = <67>,
 					     <68>;
 			};
@@ -844,7 +841,6 @@ ssi_port2: ssi-port@4805b000 {
 				reg-names = "tx",
 					    "rx";
 
-				interrupt-parent = <&intc>;
 				interrupts = <69>,
 					     <70>;
 			};

arch/arm/boot/dts/omap3430-sdp.dts

@@ -33,7 +33,7 @@ twl: twl@48 {
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
+	vqmmc-supply = <&vsim>;
 	/*
 	 * S6-3 must be in ON position for 8 bit mode to function
 	 * Else, use 4 bit mode

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -129,6 +129,34 @@ touchscreen_reset {
 		output-high;
 		line-name = "touchscreen-reset";
 	};
+
+	pwm8: dmtimer-pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: dmtimer-pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+
 };
 
 &dsi1 {
@@ -373,7 +401,7 @@ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
 		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
 		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
 		>;
@@ -488,6 +516,18 @@ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
 		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 		>;
 	};
+
+	vibrator_direction_pin: pinmux_vibrator_direction_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: pinmux_vibrator_enable_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
 };
 
 &uart3 {

arch/arm/boot/dts/omap4-duovero-parlor.dts

@@ -100,7 +100,7 @@ OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enab
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
 			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
 		>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -267,7 +267,7 @@ OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
 			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/boot/dts/omap4-sdp-es23plus.dts

@@ -10,7 +10,7 @@
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
 		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/boot/dts/omap4-sdp.dts

@@ -290,7 +290,7 @@ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
 			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/boot/dts/omap4-var-om44customboard.dtsi

@@ -122,7 +122,7 @@ OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
 			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -290,7 +290,7 @@ OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
 			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
 			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
 		>;

arch/arm/boot/dts/omap5-cm-t54.dts

@@ -266,7 +266,7 @@ OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */
+			OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
 			OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
 			OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
 		>;

arch/arm/boot/dts/tps65217.dtsi

@@ -18,11 +18,14 @@ &tps {
 
 	charger {
 		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 		status = "disabled";
 	};
 
 	pwrbutton {
 		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
 		status = "disabled";
 	};
 

include/dt-bindings/pinctrl/dra.h

@@ -73,5 +73,8 @@
  */
 #define DRA7XX_CORE_IOPAD(pa, val)	(((pa) & 0xffff) - 0x3400) (val)
 
+/* DRA7 IODELAY configuration parameters */
+#define A_DELAY_PS(val)			((val) & 0xffff)
+#define G_DELAY_PS(val)			((val) & 0xffff)
 #endif