Commit 18d84e2e authored by Alexander Lobakin's avatar Alexander Lobakin Committed by Paul Burton

MIPS: make CPU_HAS_LOAD_STORE_LR opt-out

CPU_HAS_LOAD_STORE_LR was introduced in 932afdee ("MIPS: Add Kconfig
variable for CPUs with unaligned load/store instructions") to make code
in kernel/unaligned.c and lib/mem{cpy,set}.S more intuitive and give a
possibility to easily add new CPUs without these instruction sets in
future.

Hovewer, this variant is not optimal for mainly two reasons:
* For now, we have 20+ CPUs with such instructions and only two (MIPS R6)
  without. It will obviously be more effective and straightforward to
  have an option for these two rather than for the rest.
* You can easily miss the fact that you need to select this option when
  adding a new CPU, while all processors lacking these sets are
  well-known, so the probability of missing something is way much lower.

We can address both points by turning CPU_HAS_LOAD_STORE_LR into opt-out
CPU_NO_LOAD_STORE_LR. This also makes MIPS root Kconfig more clear and
understandable.
Signed-off-by: default avatarAlexander Lobakin <alobakin@dlink.ru>
Signed-off-by: default avatarPaul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Will Deacon <will@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
parent 7de86604
......@@ -1218,8 +1218,7 @@ config NO_IOPORT_MAP
def_bool n
config GENERIC_CSUM
bool
default y if !CPU_HAS_LOAD_STORE_LR
def_bool CPU_NO_LOAD_STORE_LR
config GENERIC_ISA_DMA
bool
......@@ -1441,7 +1440,6 @@ config CPU_LOONGSON64
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select CPU_SUPPORTS_MSA
select CPU_HAS_LOAD_STORE_LR
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select MIPS_ASID_BITS_VARIABLE
......@@ -1537,7 +1535,6 @@ config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
help
......@@ -1555,7 +1552,6 @@ config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
......@@ -1571,6 +1567,7 @@ config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6
select CPU_HAS_PREFETCH
select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
......@@ -1586,7 +1583,6 @@ config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SYS_HAS_CPU_MIPS64_R1
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1606,7 +1602,6 @@ config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SYS_HAS_CPU_MIPS64_R2
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1624,6 +1619,7 @@ config CPU_MIPS64_R6
bool "MIPS64 Release 6"
depends on SYS_HAS_CPU_MIPS64_R6
select CPU_HAS_PREFETCH
select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1641,7 +1637,6 @@ config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
select CPU_HAS_WB
select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1657,7 +1652,6 @@ config CPU_TX39XX
bool "R39XX"
depends on SYS_HAS_CPU_TX39XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
config CPU_VR41XX
......@@ -1665,7 +1659,6 @@ config CPU_VR41XX
depends on SYS_HAS_CPU_VR41XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_HAS_LOAD_STORE_LR
help
The options selects support for the NEC VR4100 series of processors.
Only choose this option if you have one of these processors as a
......@@ -1678,7 +1671,6 @@ config CPU_R4X00
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R4000-series processors other than 4300, including
the R4000, R4400, R4600, and 4700.
......@@ -1687,7 +1679,6 @@ config CPU_TX49XX
bool "R49XX"
depends on SYS_HAS_CPU_TX49XX
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
......@@ -1698,7 +1689,6 @@ config CPU_R5000
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R5000-series processors other than the Nevada.
......@@ -1708,7 +1698,6 @@ config CPU_R5500
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
......@@ -1719,7 +1708,6 @@ config CPU_NEVADA
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help
QED / PMC-Sierra RM52xx-series ("Nevada") processors.
......@@ -1727,7 +1715,6 @@ config CPU_R10000
bool "R10000"
depends on SYS_HAS_CPU_R10000
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1739,7 +1726,6 @@ config CPU_RM7000
bool "RM7000"
depends on SYS_HAS_CPU_RM7000
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1748,7 +1734,6 @@ config CPU_RM7000
config CPU_SB1
bool "SB1"
depends on SYS_HAS_CPU_SB1
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1759,7 +1744,6 @@ config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_64BIT_KERNEL
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
......@@ -1789,7 +1773,6 @@ config CPU_BMIPS
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_CPUFREQ
select MIPS_EXTERNAL_TIMER
help
......@@ -1798,7 +1781,6 @@ config CPU_BMIPS
config CPU_XLR
bool "Netlogic XLR SoC"
depends on SYS_HAS_CPU_XLR
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
......@@ -1817,7 +1799,6 @@ config CPU_XLP
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_MIPSR2
select CPU_SUPPORTS_HUGEPAGES
select MIPS_ASID_BITS_VARIABLE
......@@ -1923,14 +1904,12 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select ARCH_HAS_PHYS_TO_DMA
select CPU_HAS_LOAD_STORE_LR
config CPU_LOONGSON32
bool
select CPU_MIPS32
select CPU_MIPSR2
select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_CPUFREQ
......@@ -2573,12 +2552,13 @@ config XKS01
config CPU_HAS_RIXI
bool
config CPU_HAS_LOAD_STORE_LR
config CPU_NO_LOAD_STORE_LR
bool
help
CPU has support for unaligned load and store instructions:
CPU lacks support for unaligned load and store instructions:
LWL, LWR, SWL, SWR (Load/store word left/right).
LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems).
LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
systems).
#
# Vectored interrupt mode is an R2 feature
......
......@@ -131,7 +131,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -152,7 +152,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
......@@ -187,7 +187,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
do { \
......@@ -213,7 +213,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -256,7 +256,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
......@@ -340,7 +340,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
......@@ -366,7 +366,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -407,7 +407,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -483,7 +483,7 @@ do { \
: "memory"); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#else /* __BIG_ENDIAN */
......@@ -509,7 +509,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -530,7 +530,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
......@@ -565,7 +565,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
......@@ -592,7 +592,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -635,7 +635,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
......@@ -718,7 +718,7 @@ do { \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
do { \
......@@ -743,7 +743,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
......@@ -784,7 +784,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
do { \
......@@ -861,7 +861,7 @@ do { \
: "memory"); \
} while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#endif
#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
......
......@@ -301,14 +301,14 @@
and t0, src, ADDRMASK
PREFS( 0, 2*32(src) )
PREFD( 1, 2*32(dst) )
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
bnez t1, .Ldst_unaligned\@
nop
bnez t0, .Lsrc_unaligned_dst_aligned\@
#else
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
or t0, t0, t1
bnez t0, .Lcopy_unaligned_bytes\@
#endif
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
/*
* use delay slot for fall-through
* src and dst are aligned; need to compute rem
......@@ -389,7 +389,7 @@
bne rem, len, 1b
.set noreorder
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
/*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch
......@@ -491,7 +491,7 @@
bne len, rem, 1b
.set noreorder
#endif /* CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
.Lcopy_bytes_checklen\@:
beqz len, .Ldone\@
nop
......@@ -520,7 +520,7 @@
jr ra
nop
#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lcopy_unaligned_bytes\@:
1:
COPY_BYTE(0)
......@@ -534,7 +534,7 @@
ADD src, src, 8
b 1b
ADD dst, dst, 8
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.if __memcpy == 1
END(memcpy)
.set __memcpy, 0
......
......@@ -115,7 +115,7 @@
#endif
.set reorder
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
R10KCBARRIER(0(ra))
#ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
......@@ -125,7 +125,7 @@
PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define STORE_BYTE(N) \
EX(sb, a1, N(a0), .Lbyte_fixup\@); \
.set noreorder; \
......@@ -150,7 +150,7 @@
ori a0, STORMASK
xori a0, STORMASK
PTR_ADDIU a0, STORSIZE
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f
andi t0, a2, 0x40-STORSIZE
......@@ -185,7 +185,7 @@
.set noreorder
beqz a2, 1f
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
PTR_ADDU a0, a2 /* What's left */
.set reorder
R10KCBARRIER(0(ra))
......@@ -194,7 +194,7 @@
#else
EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
#endif
#else
#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
PTR_SUBU t0, $0, a2
.set reorder
move a2, zero /* No remaining longs */
......@@ -211,7 +211,7 @@
EX(sb, a1, 6(a0), .Lbyte_fixup\@)
#endif
0:
#endif
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: move a2, zero
jr ra
......@@ -234,7 +234,7 @@
.hidden __memset
.endif
#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lbyte_fixup\@:
/*
* unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
......@@ -243,7 +243,7 @@
PTR_SUBU a2, t0
PTR_ADDIU a2, 1
jr ra
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.Lfirst_fixup\@:
/* unset_bytes already in a2 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment