Commit 18d84e2e authored by Alexander Lobakin's avatar Alexander Lobakin Committed by Paul Burton

MIPS: make CPU_HAS_LOAD_STORE_LR opt-out

CPU_HAS_LOAD_STORE_LR was introduced in 932afdee ("MIPS: Add Kconfig
variable for CPUs with unaligned load/store instructions") to make code
in kernel/unaligned.c and lib/mem{cpy,set}.S more intuitive and give a
possibility to easily add new CPUs without these instruction sets in
future.

Hovewer, this variant is not optimal for mainly two reasons:
* For now, we have 20+ CPUs with such instructions and only two (MIPS R6)
  without. It will obviously be more effective and straightforward to
  have an option for these two rather than for the rest.
* You can easily miss the fact that you need to select this option when
  adding a new CPU, while all processors lacking these sets are
  well-known, so the probability of missing something is way much lower.

We can address both points by turning CPU_HAS_LOAD_STORE_LR into opt-out
CPU_NO_LOAD_STORE_LR. This also makes MIPS root Kconfig more clear and
understandable.
Signed-off-by: default avatarAlexander Lobakin <alobakin@dlink.ru>
Signed-off-by: default avatarPaul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Will Deacon <will@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
parent 7de86604
...@@ -1218,8 +1218,7 @@ config NO_IOPORT_MAP ...@@ -1218,8 +1218,7 @@ config NO_IOPORT_MAP
def_bool n def_bool n
config GENERIC_CSUM config GENERIC_CSUM
bool def_bool CPU_NO_LOAD_STORE_LR
default y if !CPU_HAS_LOAD_STORE_LR
config GENERIC_ISA_DMA config GENERIC_ISA_DMA
bool bool
...@@ -1441,7 +1440,6 @@ config CPU_LOONGSON64 ...@@ -1441,7 +1440,6 @@ config CPU_LOONGSON64
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select CPU_SUPPORTS_MSA select CPU_SUPPORTS_MSA
select CPU_HAS_LOAD_STORE_LR
select WEAK_ORDERING select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC select WEAK_REORDERING_BEYOND_LLSC
select MIPS_ASID_BITS_VARIABLE select MIPS_ASID_BITS_VARIABLE
...@@ -1537,7 +1535,6 @@ config CPU_MIPS32_R1 ...@@ -1537,7 +1535,6 @@ config CPU_MIPS32_R1
bool "MIPS32 Release 1" bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1 depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
help help
...@@ -1555,7 +1552,6 @@ config CPU_MIPS32_R2 ...@@ -1555,7 +1552,6 @@ config CPU_MIPS32_R2
bool "MIPS32 Release 2" bool "MIPS32 Release 2"
depends on SYS_HAS_CPU_MIPS32_R2 depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA select CPU_SUPPORTS_MSA
...@@ -1571,6 +1567,7 @@ config CPU_MIPS32_R6 ...@@ -1571,6 +1567,7 @@ config CPU_MIPS32_R6
bool "MIPS32 Release 6" bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6 depends on SYS_HAS_CPU_MIPS32_R6
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA select CPU_SUPPORTS_MSA
...@@ -1586,7 +1583,6 @@ config CPU_MIPS64_R1 ...@@ -1586,7 +1583,6 @@ config CPU_MIPS64_R1
bool "MIPS64 Release 1" bool "MIPS64 Release 1"
depends on SYS_HAS_CPU_MIPS64_R1 depends on SYS_HAS_CPU_MIPS64_R1
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1606,7 +1602,6 @@ config CPU_MIPS64_R2 ...@@ -1606,7 +1602,6 @@ config CPU_MIPS64_R2
bool "MIPS64 Release 2" bool "MIPS64 Release 2"
depends on SYS_HAS_CPU_MIPS64_R2 depends on SYS_HAS_CPU_MIPS64_R2
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1624,6 +1619,7 @@ config CPU_MIPS64_R6 ...@@ -1624,6 +1619,7 @@ config CPU_MIPS64_R6
bool "MIPS64 Release 6" bool "MIPS64 Release 6"
depends on SYS_HAS_CPU_MIPS64_R6 depends on SYS_HAS_CPU_MIPS64_R6
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1641,7 +1637,6 @@ config CPU_R3000 ...@@ -1641,7 +1637,6 @@ config CPU_R3000
bool "R3000" bool "R3000"
depends on SYS_HAS_CPU_R3000 depends on SYS_HAS_CPU_R3000
select CPU_HAS_WB select CPU_HAS_WB
select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB select CPU_R3K_TLB
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1657,7 +1652,6 @@ config CPU_TX39XX ...@@ -1657,7 +1652,6 @@ config CPU_TX39XX
bool "R39XX" bool "R39XX"
depends on SYS_HAS_CPU_TX39XX depends on SYS_HAS_CPU_TX39XX
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB select CPU_R3K_TLB
config CPU_VR41XX config CPU_VR41XX
...@@ -1665,7 +1659,6 @@ config CPU_VR41XX ...@@ -1665,7 +1659,6 @@ config CPU_VR41XX
depends on SYS_HAS_CPU_VR41XX depends on SYS_HAS_CPU_VR41XX
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_HAS_LOAD_STORE_LR
help help
The options selects support for the NEC VR4100 series of processors. The options selects support for the NEC VR4100 series of processors.
Only choose this option if you have one of these processors as a Only choose this option if you have one of these processors as a
...@@ -1678,7 +1671,6 @@ config CPU_R4X00 ...@@ -1678,7 +1671,6 @@ config CPU_R4X00
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help help
MIPS Technologies R4000-series processors other than 4300, including MIPS Technologies R4000-series processors other than 4300, including
the R4000, R4400, R4600, and 4700. the R4000, R4400, R4600, and 4700.
...@@ -1687,7 +1679,6 @@ config CPU_TX49XX ...@@ -1687,7 +1679,6 @@ config CPU_TX49XX
bool "R49XX" bool "R49XX"
depends on SYS_HAS_CPU_TX49XX depends on SYS_HAS_CPU_TX49XX
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
...@@ -1698,7 +1689,6 @@ config CPU_R5000 ...@@ -1698,7 +1689,6 @@ config CPU_R5000
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help help
MIPS Technologies R5000-series processors other than the Nevada. MIPS Technologies R5000-series processors other than the Nevada.
...@@ -1708,7 +1698,6 @@ config CPU_R5500 ...@@ -1708,7 +1698,6 @@ config CPU_R5500
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set. instruction set.
...@@ -1719,7 +1708,6 @@ config CPU_NEVADA ...@@ -1719,7 +1708,6 @@ config CPU_NEVADA
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select CPU_HAS_LOAD_STORE_LR
help help
QED / PMC-Sierra RM52xx-series ("Nevada") processors. QED / PMC-Sierra RM52xx-series ("Nevada") processors.
...@@ -1727,7 +1715,6 @@ config CPU_R10000 ...@@ -1727,7 +1715,6 @@ config CPU_R10000
bool "R10000" bool "R10000"
depends on SYS_HAS_CPU_R10000 depends on SYS_HAS_CPU_R10000
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1739,7 +1726,6 @@ config CPU_RM7000 ...@@ -1739,7 +1726,6 @@ config CPU_RM7000
bool "RM7000" bool "RM7000"
depends on SYS_HAS_CPU_RM7000 depends on SYS_HAS_CPU_RM7000
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1748,7 +1734,6 @@ config CPU_RM7000 ...@@ -1748,7 +1734,6 @@ config CPU_RM7000
config CPU_SB1 config CPU_SB1
bool "SB1" bool "SB1"
depends on SYS_HAS_CPU_SB1 depends on SYS_HAS_CPU_SB1
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1759,7 +1744,6 @@ config CPU_CAVIUM_OCTEON ...@@ -1759,7 +1744,6 @@ config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor" bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON depends on SYS_HAS_CPU_CAVIUM_OCTEON
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select WEAK_ORDERING select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1789,7 +1773,6 @@ config CPU_BMIPS ...@@ -1789,7 +1773,6 @@ config CPU_BMIPS
select WEAK_ORDERING select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_CPUFREQ select CPU_SUPPORTS_CPUFREQ
select MIPS_EXTERNAL_TIMER select MIPS_EXTERNAL_TIMER
help help
...@@ -1798,7 +1781,6 @@ config CPU_BMIPS ...@@ -1798,7 +1781,6 @@ config CPU_BMIPS
config CPU_XLR config CPU_XLR
bool "Netlogic XLR SoC" bool "Netlogic XLR SoC"
depends on SYS_HAS_CPU_XLR depends on SYS_HAS_CPU_XLR
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
...@@ -1817,7 +1799,6 @@ config CPU_XLP ...@@ -1817,7 +1799,6 @@ config CPU_XLP
select WEAK_ORDERING select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_MIPSR2 select CPU_MIPSR2
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select MIPS_ASID_BITS_VARIABLE select MIPS_ASID_BITS_VARIABLE
...@@ -1923,14 +1904,12 @@ config CPU_LOONGSON2EF ...@@ -1923,14 +1904,12 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_HUGEPAGES
select ARCH_HAS_PHYS_TO_DMA select ARCH_HAS_PHYS_TO_DMA
select CPU_HAS_LOAD_STORE_LR
config CPU_LOONGSON32 config CPU_LOONGSON32
bool bool
select CPU_MIPS32 select CPU_MIPS32
select CPU_MIPSR2 select CPU_MIPSR2
select CPU_HAS_PREFETCH select CPU_HAS_PREFETCH
select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_CPUFREQ select CPU_SUPPORTS_CPUFREQ
...@@ -2573,12 +2552,13 @@ config XKS01 ...@@ -2573,12 +2552,13 @@ config XKS01
config CPU_HAS_RIXI config CPU_HAS_RIXI
bool bool
config CPU_HAS_LOAD_STORE_LR config CPU_NO_LOAD_STORE_LR
bool bool
help help
CPU has support for unaligned load and store instructions: CPU lacks support for unaligned load and store instructions:
LWL, LWR, SWL, SWR (Load/store word left/right). LWL, LWR, SWL, SWR (Load/store word left/right).
LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems). LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
systems).
# #
# Vectored interrupt mode is an R2 feature # Vectored interrupt mode is an R2 feature
......
...@@ -131,7 +131,7 @@ do { \ ...@@ -131,7 +131,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \ #define _LoadW(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -152,7 +152,7 @@ do { \ ...@@ -152,7 +152,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */ /* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \ #define _LoadW(addr, value, res, type) \
do { \ do { \
...@@ -187,7 +187,7 @@ do { \ ...@@ -187,7 +187,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \ #define _LoadHWU(addr, value, res, type) \
do { \ do { \
...@@ -213,7 +213,7 @@ do { \ ...@@ -213,7 +213,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \ #define _LoadWU(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -256,7 +256,7 @@ do { \ ...@@ -256,7 +256,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */ /* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \ #define _LoadWU(addr, value, res, type) \
do { \ do { \
...@@ -340,7 +340,7 @@ do { \ ...@@ -340,7 +340,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \ #define _StoreHW(addr, value, res, type) \
...@@ -366,7 +366,7 @@ do { \ ...@@ -366,7 +366,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\ : "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \ #define _StoreW(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -407,7 +407,7 @@ do { \ ...@@ -407,7 +407,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \ : "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreW(addr, value, res, type) \ #define _StoreW(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -483,7 +483,7 @@ do { \ ...@@ -483,7 +483,7 @@ do { \
: "memory"); \ : "memory"); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#else /* __BIG_ENDIAN */ #else /* __BIG_ENDIAN */
...@@ -509,7 +509,7 @@ do { \ ...@@ -509,7 +509,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \ #define _LoadW(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -530,7 +530,7 @@ do { \ ...@@ -530,7 +530,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */ /* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \ #define _LoadW(addr, value, res, type) \
do { \ do { \
...@@ -565,7 +565,7 @@ do { \ ...@@ -565,7 +565,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \ #define _LoadHWU(addr, value, res, type) \
...@@ -592,7 +592,7 @@ do { \ ...@@ -592,7 +592,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \ #define _LoadWU(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -635,7 +635,7 @@ do { \ ...@@ -635,7 +635,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */ /* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \ #define _LoadWU(addr, value, res, type) \
do { \ do { \
...@@ -718,7 +718,7 @@ do { \ ...@@ -718,7 +718,7 @@ do { \
: "=&r" (value), "=r" (res) \ : "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \ : "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \ #define _StoreHW(addr, value, res, type) \
do { \ do { \
...@@ -743,7 +743,7 @@ do { \ ...@@ -743,7 +743,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\ : "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0) } while(0)
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \ #define _StoreW(addr, value, res, type) \
do { \ do { \
__asm__ __volatile__ ( \ __asm__ __volatile__ ( \
...@@ -784,7 +784,7 @@ do { \ ...@@ -784,7 +784,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \ : "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0) } while(0)
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without swl and sdl instructions */ /* For CPUs without swl and sdl instructions */
#define _StoreW(addr, value, res, type) \ #define _StoreW(addr, value, res, type) \
do { \ do { \
...@@ -861,7 +861,7 @@ do { \ ...@@ -861,7 +861,7 @@ do { \
: "memory"); \ : "memory"); \
} while(0) } while(0)
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#endif #endif
#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel) #define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
......
...@@ -301,14 +301,14 @@ ...@@ -301,14 +301,14 @@
and t0, src, ADDRMASK and t0, src, ADDRMASK
PREFS( 0, 2*32(src) ) PREFS( 0, 2*32(src) )
PREFD( 1, 2*32(dst) ) PREFD( 1, 2*32(dst) )
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
bnez t1, .Ldst_unaligned\@ bnez t1, .Ldst_unaligned\@
nop nop
bnez t0, .Lsrc_unaligned_dst_aligned\@ bnez t0, .Lsrc_unaligned_dst_aligned\@
#else #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
or t0, t0, t1 or t0, t0, t1
bnez t0, .Lcopy_unaligned_bytes\@ bnez t0, .Lcopy_unaligned_bytes\@
#endif #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* /*
* use delay slot for fall-through * use delay slot for fall-through
* src and dst are aligned; need to compute rem * src and dst are aligned; need to compute rem
...@@ -389,7 +389,7 @@ ...@@ -389,7 +389,7 @@
bne rem, len, 1b bne rem, len, 1b
.set noreorder .set noreorder
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
/* /*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES) * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch * A loop would do only a byte at a time with possible branch
...@@ -491,7 +491,7 @@ ...@@ -491,7 +491,7 @@
bne len, rem, 1b bne len, rem, 1b
.set noreorder .set noreorder
#endif /* CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
.Lcopy_bytes_checklen\@: .Lcopy_bytes_checklen\@:
beqz len, .Ldone\@ beqz len, .Ldone\@
nop nop
...@@ -520,7 +520,7 @@ ...@@ -520,7 +520,7 @@
jr ra jr ra
nop nop
#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR #ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lcopy_unaligned_bytes\@: .Lcopy_unaligned_bytes\@:
1: 1:
COPY_BYTE(0) COPY_BYTE(0)
...@@ -534,7 +534,7 @@ ...@@ -534,7 +534,7 @@
ADD src, src, 8 ADD src, src, 8
b 1b b 1b
ADD dst, dst, 8 ADD dst, dst, 8
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.if __memcpy == 1 .if __memcpy == 1
END(memcpy) END(memcpy)
.set __memcpy, 0 .set __memcpy, 0
......
...@@ -115,7 +115,7 @@ ...@@ -115,7 +115,7 @@
#endif #endif
.set reorder .set reorder
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
R10KCBARRIER(0(ra)) R10KCBARRIER(0(ra))
#ifdef __MIPSEB__ #ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */ EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
...@@ -125,7 +125,7 @@ ...@@ -125,7 +125,7 @@
PTR_SUBU a0, t0 /* long align ptr */ PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */ PTR_ADDU a2, t0 /* correct size */
#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define STORE_BYTE(N) \ #define STORE_BYTE(N) \
EX(sb, a1, N(a0), .Lbyte_fixup\@); \ EX(sb, a1, N(a0), .Lbyte_fixup\@); \
.set noreorder; \ .set noreorder; \
...@@ -150,7 +150,7 @@ ...@@ -150,7 +150,7 @@
ori a0, STORMASK ori a0, STORMASK
xori a0, STORMASK xori a0, STORMASK
PTR_ADDIU a0, STORSIZE PTR_ADDIU a0, STORSIZE
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: ori t1, a2, 0x3f /* # of full blocks */ 1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f xori t1, 0x3f
andi t0, a2, 0x40-STORSIZE andi t0, a2, 0x40-STORSIZE
...@@ -185,7 +185,7 @@ ...@@ -185,7 +185,7 @@
.set noreorder .set noreorder
beqz a2, 1f beqz a2, 1f
#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR #ifndef CONFIG_CPU_NO_LOAD_STORE_LR
PTR_ADDU a0, a2 /* What's left */ PTR_ADDU a0, a2 /* What's left */
.set reorder .set reorder
R10KCBARRIER(0(ra)) R10KCBARRIER(0(ra))
...@@ -194,7 +194,7 @@ ...@@ -194,7 +194,7 @@
#else #else
EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@) EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
#endif #endif
#else #else /* CONFIG_CPU_NO_LOAD_STORE_LR */
PTR_SUBU t0, $0, a2 PTR_SUBU t0, $0, a2
.set reorder .set reorder
move a2, zero /* No remaining longs */ move a2, zero /* No remaining longs */
...@@ -211,7 +211,7 @@ ...@@ -211,7 +211,7 @@
EX(sb, a1, 6(a0), .Lbyte_fixup\@) EX(sb, a1, 6(a0), .Lbyte_fixup\@)
#endif #endif
0: 0:
#endif #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: move a2, zero 1: move a2, zero
jr ra jr ra
...@@ -234,7 +234,7 @@ ...@@ -234,7 +234,7 @@
.hidden __memset .hidden __memset
.endif .endif
#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR #ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lbyte_fixup\@: .Lbyte_fixup\@:
/* /*
* unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1 * unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
...@@ -243,7 +243,7 @@ ...@@ -243,7 +243,7 @@
PTR_SUBU a2, t0 PTR_SUBU a2, t0
PTR_ADDIU a2, 1 PTR_ADDIU a2, 1
jr ra jr ra
#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ #endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.Lfirst_fixup\@: .Lfirst_fixup\@:
/* unset_bytes already in a2 */ /* unset_bytes already in a2 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment