drm: xlnx: zynqmp_dpsub: Set input live format

Program live video input format according to selected media bus format.

In the bridge mode of operation, DPSUB is connected to FPGA CRTC which
almost certainly supports a single media bus format as its output. Expect
this to be delivered via the new bridge atomic state. Program DPSUB
registers accordingly.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-6-c7f379b7168e@amd.com

drivers/gpu/drm/xlnx/zynqmp_disp.c

@@ -436,19 +436,29 @@ static void zynqmp_disp_avbuf_set_format(struct zynqmp_disp *disp,
 					 const struct zynqmp_disp_format *fmt)
 {
 	unsigned int i;
-	u32 val;
+	u32 val, reg;
 
-	val = zynqmp_disp_avbuf_read(disp, ZYNQMP_DISP_AV_BUF_FMT);
-	val &= zynqmp_disp_layer_is_video(layer)
-	    ? ~ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MASK
-	    : ~ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_MASK;
-	val |= fmt->buf_fmt;
-	zynqmp_disp_avbuf_write(disp, ZYNQMP_DISP_AV_BUF_FMT, val);
+	layer->disp_fmt = fmt;
+	if (layer->mode == ZYNQMP_DPSUB_LAYER_NONLIVE) {
+		reg = ZYNQMP_DISP_AV_BUF_FMT;
+		val = zynqmp_disp_avbuf_read(disp, ZYNQMP_DISP_AV_BUF_FMT);
+		val &= zynqmp_disp_layer_is_video(layer)
+		    ? ~ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MASK
+		    : ~ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_MASK;
+		val |= fmt->buf_fmt;
+		zynqmp_disp_avbuf_write(disp, reg, val);
+	} else {
+		reg = zynqmp_disp_layer_is_video(layer)
+		    ? ZYNQMP_DISP_AV_BUF_LIVE_VID_CONFIG
+		    : ZYNQMP_DISP_AV_BUF_LIVE_GFX_CONFIG;
+		val = fmt->buf_fmt;
+		zynqmp_disp_avbuf_write(disp, reg, val);
+	}
 
 	for (i = 0; i < ZYNQMP_DISP_AV_BUF_NUM_SF; i++) {
-		unsigned int reg = zynqmp_disp_layer_is_video(layer)
-				 ? ZYNQMP_DISP_AV_BUF_VID_COMP_SF(i)
-				 : ZYNQMP_DISP_AV_BUF_GFX_COMP_SF(i);
+		reg = zynqmp_disp_layer_is_video(layer)
+		    ? ZYNQMP_DISP_AV_BUF_VID_COMP_SF(i)
+		    : ZYNQMP_DISP_AV_BUF_GFX_COMP_SF(i);
 
 		zynqmp_disp_avbuf_write(disp, reg, fmt->sf[i]);
 	}
@@ -926,6 +936,31 @@ zynqmp_disp_layer_find_format(struct zynqmp_disp_layer *layer,
 	return NULL;
 }
 
+/**
+ * zynqmp_disp_layer_find_live_format - Find format information for given
+ * media bus format
+ * @layer: The layer
+ * @drm_fmt: Media bus format to search
+ *
+ * Search display subsystem format information corresponding to the given media
+ * bus format @media_bus_format for the @layer, and return a pointer to the
+ * format descriptor.
+ *
+ * Return: A pointer to the format descriptor if found, NULL otherwise
+ */
+static const struct zynqmp_disp_format *
+zynqmp_disp_layer_find_live_format(struct zynqmp_disp_layer *layer,
+				   u32 media_bus_format)
+{
+	unsigned int i;
+
+	for (i = 0; i < layer->info->num_formats; i++)
+		if (layer->info->formats[i].bus_fmt == media_bus_format)
+			return &layer->info->formats[i];
+
+	return NULL;
+}
+
 /**
  * zynqmp_disp_layer_drm_formats - Return the DRM formats supported by the layer
  * @layer: The layer
@@ -1040,6 +1075,9 @@ void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer)
  * @layer: The layer
  * @info: The format info
  *
+ * NOTE: Use zynqmp_disp_layer_set_live_format() to set media bus format for
+ * live video layers.
+ *
  * Set the format for @layer to @info. The layer must be disabled.
  */
 void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
@@ -1047,14 +1085,16 @@ void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
 {
 	unsigned int i;
 
+	if (WARN_ON(layer->mode != ZYNQMP_DPSUB_LAYER_NONLIVE))
+		return;
+
 	layer->disp_fmt = zynqmp_disp_layer_find_format(layer, info->format);
+	if (WARN_ON(!layer->disp_fmt))
+		return;
 	layer->drm_fmt = info;
 
 	zynqmp_disp_avbuf_set_format(layer->disp, layer, layer->disp_fmt);
 
-	if (layer->mode == ZYNQMP_DPSUB_LAYER_LIVE)
-		return;
-
 	/*
 	 * Set pconfig for each DMA channel to indicate they're part of a
 	 * video group.
@@ -1074,6 +1114,32 @@ void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
 	}
 }
 
+/**
+ * zynqmp_disp_layer_set_live_format - Set the live video layer format
+ * @layer: The layer
+ * @info: The format info
+ *
+ * NOTE: This function should not be used to set format for non-live video
+ * layer. Use zynqmp_disp_layer_set_format() instead.
+ *
+ * Set the display format for the live @layer. The layer must be disabled.
+ */
+void zynqmp_disp_layer_set_live_format(struct zynqmp_disp_layer *layer,
+				       u32 media_bus_format)
+{
+	if (WARN_ON(layer->mode != ZYNQMP_DPSUB_LAYER_LIVE))
+		return;
+
+	layer->disp_fmt = zynqmp_disp_layer_find_live_format(layer,
+							     media_bus_format);
+	if (WARN_ON(!layer->disp_fmt))
+		return;
+
+	zynqmp_disp_avbuf_set_format(layer->disp, layer, layer->disp_fmt);
+
+	layer->drm_fmt = drm_format_info(layer->disp_fmt->drm_fmt);
+}
+
 /**
  * zynqmp_disp_layer_update - Update the layer framebuffer
  * @layer: The layer

drivers/gpu/drm/xlnx/zynqmp_disp.h

@@ -58,6 +58,8 @@ void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
 void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
 void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
 				  const struct drm_format_info *info);
+void zynqmp_disp_layer_set_live_format(struct zynqmp_disp_layer *layer,
+				       u32 media_bus_format);
 int zynqmp_disp_layer_update(struct zynqmp_disp_layer *layer,
 			     struct drm_plane_state *state);
 

drivers/gpu/drm/xlnx/zynqmp_dp.c

@@ -1299,15 +1299,20 @@ static void zynqmp_dp_disp_enable(struct zynqmp_dp *dp,
 				  struct drm_bridge_state *old_bridge_state)
 {
 	struct zynqmp_disp_layer *layer;
-	const struct drm_format_info *info;
+	struct drm_bridge_state *bridge_state;
+	u32 bus_fmt;
 
 	layer = zynqmp_dp_disp_connected_live_layer(dp);
 	if (!layer)
 		return;
 
-	/* TODO: Make the format configurable. */
-	info = drm_format_info(DRM_FORMAT_YUV422);
-	zynqmp_disp_layer_set_format(layer, info);
+	bridge_state = drm_atomic_get_new_bridge_state(old_bridge_state->base.state,
+						       old_bridge_state->bridge);
+	if (WARN_ON(!bridge_state))
+		return;
+
+	bus_fmt = bridge_state->input_bus_cfg.format;
+	zynqmp_disp_layer_set_live_format(layer, bus_fmt);
 	zynqmp_disp_layer_enable(layer);
 
 	if (layer == dp->dpsub->layers[ZYNQMP_DPSUB_LAYER_GFX])