Merge tag 'soc-fsl-for-4.19' of...

Merge tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

Various updates to soc/fsl for 4.19

Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver

* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt → Documentation/networking/dpaa2/dpio-driver.rst

-Copyright 2016 NXP
+.. include:: <isonum.txt>
+
+DPAA2 DPIO (Data Path I/O) Overview
+===================================
+
+:Copyright: |copy| 2016-2018 NXP
+
+This document provides an overview of the Freescale DPAA2 DPIO
+drivers
 
 Introduction
-------------
+============
 
 A DPAA2 DPIO (Data Path I/O) is a hardware object that provides
 interfaces to enqueue and dequeue frames to/from network interfaces
@@ -27,8 +35,11 @@ provides services that:
 
 The Linux DPIO driver consists of 3 primary components--
    DPIO object driver-- fsl-mc driver that manages the DPIO object
+
    DPIO service-- provides APIs to other Linux drivers for services
+
    QBman portal interface-- sends portal commands, gets responses
+::
 
           fsl-mc          other
            bus           drivers
@@ -45,8 +56,9 @@ The Linux DPIO driver consists of 3 primary components--
                             |
                          hardware
 
+
 The diagram below shows how the DPIO driver components fit with the other
-DPAA2 Linux driver components:
+DPAA2 Linux driver components::
                                                    +------------+
                                                    | OS Network |
                                                    |   Stack    |
@@ -98,20 +110,29 @@ DPIO service  (dpio-service.c, dpaa2-io.h)
 
    Notification handling
       dpaa2_io_service_register()
+
       dpaa2_io_service_deregister()
+
       dpaa2_io_service_rearm()
 
    Queuing
       dpaa2_io_service_pull_fq()
+
       dpaa2_io_service_pull_channel()
+
       dpaa2_io_service_enqueue_fq()
+
       dpaa2_io_service_enqueue_qd()
+
       dpaa2_io_store_create()
+
       dpaa2_io_store_destroy()
+
       dpaa2_io_store_next()
 
    Buffer pool management
       dpaa2_io_service_release()
+
       dpaa2_io_service_acquire()
 
 QBman portal interface (qbman-portal.c)
@@ -120,7 +141,9 @@ QBman portal interface (qbman-portal.c)
    The qbman-portal component provides APIs to do the low level hardware
    bit twiddling for operations such as:
       -initializing Qman software portals
+
       -building and sending portal commands
+
       -portal interrupt configuration and processing
 
    The qbman-portal APIs are not public to other drivers, and are

Documentation/networking/dpaa2/index.rst

@@ -6,3 +6,4 @@ DPAA2 Documentation
    :maxdepth: 1
 
    overview
+   dpio-driver

MAINTAINERS

@@ -4418,7 +4418,7 @@ DPAA2 DATAPATH I/O (DPIO) DRIVER
 M:	Roy Pledge <Roy.Pledge@nxp.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	drivers/staging/fsl-mc/bus/dpio
+F:	drivers/soc/fsl/dpio
 
 DPAA2 ETHERNET DRIVER
 M:	Ioana Radulescu <ruxandra.radulescu@nxp.com>

drivers/crypto/caam/sg_sw_qm2.h

@@ -35,7 +35,7 @@
 #ifndef _SG_SW_QM2_H_
 #define _SG_SW_QM2_H_
 
-#include "../../../drivers/staging/fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
 
 static inline void dma_to_qm_sg_one(struct dpaa2_sg_entry *qm_sg_ptr,
 				    dma_addr_t dma, u32 len, u16 offset)

drivers/crypto/caam/sg_sw_sec4.h

@@ -12,7 +12,7 @@
 #include "ctrl.h"
 #include "regs.h"
 #include "sg_sw_qm2.h"
-#include "../../../drivers/staging/fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
 
 struct sec4_sg_entry {
 	u64 ptr;

drivers/soc/fsl/Kconfig

 #
-# Freescale SOC drivers
+# NXP/Freescale QorIQ series SOC drivers
 #
 
+menu "NXP/Freescale QorIQ SoC drivers"
+
 source "drivers/soc/fsl/qbman/Kconfig"
 source "drivers/soc/fsl/qe/Kconfig"
 
@@ -16,3 +18,14 @@ config FSL_GUTS
 	  Initially only reading SVR and registering soc device are supported.
 	  Other guts accesses, such as reading RCW, should eventually be moved
 	  into this driver as well.
+
+config FSL_MC_DPIO
+        tristate "QorIQ DPAA2 DPIO driver"
+        depends on FSL_MC_BUS
+        help
+	  Driver for the DPAA2 DPIO object.  A DPIO provides queue and
+	  buffer management facilities for software to interact with
+	  other DPAA2 objects. This driver does not expose the DPIO
+	  objects individually, but groups them under a service layer
+	  API.
+endmenu

drivers/soc/fsl/Makefile

@@ -6,3 +6,4 @@ obj-$(CONFIG_FSL_DPAA)                 += qbman/
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
+obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/

drivers/staging/fsl-mc/bus/dpio/dpio-driver.c → drivers/soc/fsl/dpio/dpio-driver.c

@@ -16,7 +16,7 @@
 #include <linux/io.h>
 
 #include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
+#include <soc/fsl/dpaa2-io.h>
 
 #include "qbman-portal.h"
 #include "dpio.h"

drivers/staging/fsl-mc/bus/dpio/dpio-service.c → drivers/soc/fsl/dpio/dpio-service.c

@@ -6,7 +6,7 @@
  */
 #include <linux/types.h>
 #include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
+#include <soc/fsl/dpaa2-io.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>

drivers/staging/fsl-mc/bus/dpio/qbman-portal.c → drivers/soc/fsl/dpio/qbman-portal.c

@@ -8,7 +8,7 @@
 #include <asm/cacheflush.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include "../../include/dpaa2-global.h"
+#include <soc/fsl/dpaa2-global.h>
 
 #include "qbman-portal.h"
 

drivers/staging/fsl-mc/bus/dpio/qbman-portal.h → drivers/soc/fsl/dpio/qbman-portal.h

@@ -7,7 +7,7 @@
 #ifndef __FSL_QBMAN_PORTAL_H
 #define __FSL_QBMAN_PORTAL_H
 
-#include "../../include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-fd.h>
 
 struct dpaa2_dq;
 struct qbman_swp;

drivers/soc/fsl/qbman/Kconfig

 menuconfig FSL_DPAA
-	bool "Freescale DPAA 1.x support"
+	bool "QorIQ DPAA1 framework support"
 	depends on (FSL_SOC_BOOKE || ARCH_LAYERSCAPE)
 	select GENERIC_ALLOCATOR
 	help

drivers/soc/fsl/qe/Kconfig

@@ -3,7 +3,7 @@
 #
 
 config QUICC_ENGINE
-	bool "Freescale QUICC Engine (QE) Support"
+	bool "QUICC Engine (QE) framework support"
 	depends on FSL_SOC && PPC32
 	select GENERIC_ALLOCATOR
 	select CRC32

drivers/soc/fsl/qe/gpio.c

@@ -83,6 +83,33 @@ static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 	spin_unlock_irqrestore(&qe_gc->lock, flags);
 }
 
+static void qe_gpio_set_multiple(struct gpio_chip *gc,
+				 unsigned long *mask, unsigned long *bits)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = gpiochip_get_data(gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	for (i = 0; i < gc->ngpio; i++) {
+		if (*mask == 0)
+			break;
+		if (__test_and_clear_bit(i, mask)) {
+			if (test_bit(i, bits))
+				qe_gc->cpdata |= (1U << (QE_PIO_PINS - 1 - i));
+			else
+				qe_gc->cpdata &= ~(1U << (QE_PIO_PINS - 1 - i));
+		}
+	}
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
 static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
@@ -298,6 +325,7 @@ static int __init qe_add_gpiochips(void)
 		gc->direction_output = qe_gpio_dir_out;
 		gc->get = qe_gpio_get;
 		gc->set = qe_gpio_set;
+		gc->set_multiple = qe_gpio_set_multiple;
 
 		ret = of_mm_gpiochip_add_data(np, mm_gc, qe_gc);
 		if (ret)

drivers/staging/Kconfig

@@ -92,8 +92,6 @@ source "drivers/staging/clocking-wizard/Kconfig"
 
 source "drivers/staging/fbtft/Kconfig"
 
-source "drivers/staging/fsl-mc/Kconfig"
-
 source "drivers/staging/fsl-dpaa2/Kconfig"
 
 source "drivers/staging/wilc1000/Kconfig"

drivers/staging/Makefile

@@ -37,7 +37,6 @@ obj-$(CONFIG_CRYPTO_SKEIN)	+= skein/
 obj-$(CONFIG_UNISYSSPAR)	+= unisys/
 obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/
 obj-$(CONFIG_FB_TFT)		+= fbtft/
-obj-$(CONFIG_FSL_MC_BUS)	+= fsl-mc/
 obj-$(CONFIG_FSL_DPAA2)		+= fsl-dpaa2/
 obj-$(CONFIG_WILC1000)		+= wilc1000/
 obj-$(CONFIG_MOST)		+= most/

drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c

@@ -455,7 +455,7 @@ static int build_sg_fd(struct dpaa2_eth_priv *priv,
 	dpaa2_fd_set_format(fd, dpaa2_fd_sg);
 	dpaa2_fd_set_addr(fd, addr);
 	dpaa2_fd_set_len(fd, skb->len);
-	dpaa2_fd_set_ctrl(fd, DPAA2_FD_CTRL_PTA | DPAA2_FD_CTRL_PTV1);
+	dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA | FD_CTRL_PTV1);
 
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
 		enable_tx_tstamp(fd, sgt_buf);
@@ -508,7 +508,7 @@ static int build_single_fd(struct dpaa2_eth_priv *priv,
 	dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start));
 	dpaa2_fd_set_len(fd, skb->len);
 	dpaa2_fd_set_format(fd, dpaa2_fd_single);
-	dpaa2_fd_set_ctrl(fd, DPAA2_FD_CTRL_PTA | DPAA2_FD_CTRL_PTV1);
+	dpaa2_fd_set_ctrl(fd, FD_CTRL_PTA | FD_CTRL_PTV1);
 
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
 		enable_tx_tstamp(fd, buffer_start);

drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h

@@ -37,8 +37,8 @@
 #include <linux/if_vlan.h>
 #include <linux/fsl/mc.h>
 
-#include "../../fsl-mc/include/dpaa2-io.h"
-#include "../../fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-io.h>
+#include <soc/fsl/dpaa2-fd.h>
 #include "dpni.h"
 #include "dpni-cmd.h"
 
@@ -124,21 +124,13 @@ struct dpaa2_eth_swa {
 #define DPAA2_FD_FRC_FAICFDV		0x0400
 
 /* Error bits in FD CTRL */
-#define DPAA2_FD_CTRL_UFD		0x00000004
-#define DPAA2_FD_CTRL_SBE		0x00000008
-#define DPAA2_FD_CTRL_FSE		0x00000020
-#define DPAA2_FD_CTRL_FAERR		0x00000040
-
-#define DPAA2_FD_RX_ERR_MASK		(DPAA2_FD_CTRL_SBE	| \
-					 DPAA2_FD_CTRL_FAERR)
-#define DPAA2_FD_TX_ERR_MASK		(DPAA2_FD_CTRL_UFD	| \
-					 DPAA2_FD_CTRL_SBE	| \
-					 DPAA2_FD_CTRL_FSE	| \
-					 DPAA2_FD_CTRL_FAERR)
+#define DPAA2_FD_RX_ERR_MASK		(FD_CTRL_SBE | FD_CTRL_FAERR)
+#define DPAA2_FD_TX_ERR_MASK		(FD_CTRL_UFD	| \
+					 FD_CTRL_SBE	| \
+					 FD_CTRL_FSE	| \
+					 FD_CTRL_FAERR)
 
 /* Annotation bits in FD CTRL */
-#define DPAA2_FD_CTRL_PTA		0x00800000
-#define DPAA2_FD_CTRL_PTV1		0x00400000
 #define DPAA2_FD_CTRL_ASAL		0x00020000	/* ASAL = 128B */
 
 /* Frame annotation status */

drivers/staging/fsl-mc/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-source "drivers/staging/fsl-mc/bus/Kconfig"

drivers/staging/fsl-mc/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# Freescale Management Complex (MC) bus drivers
-obj-$(CONFIG_FSL_MC_BUS)	+= bus/

drivers/staging/fsl-mc/bus/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-#
-# DPAA2 fsl-mc bus
-#
-# Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
-#
-
-config FSL_MC_DPIO
-        tristate "QorIQ DPAA2 DPIO driver"
-        depends on FSL_MC_BUS
-        help
-	  Driver for the DPAA2 DPIO object.  A DPIO provides queue and
-	  buffer management facilities for software to interact with
-	  other DPAA2 objects. This driver does not expose the DPIO
-	  objects individually, but groups them under a service layer
-	  API.

drivers/staging/fsl-mc/bus/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# Freescale Management Complex (MC) bus drivers
-#
-# Copyright (C) 2014 Freescale Semiconductor, Inc.
-#
-
-# MC DPIO driver
-obj-$(CONFIG_FSL_MC_DPIO) += dpio/

drivers/staging/fsl-mc/include/dpaa2-fd.h → include/soc/fsl/dpaa2-fd.h

@@ -67,6 +67,18 @@ struct dpaa2_fd {
 #define SG_FINAL_FLAG_MASK	0x1
 #define SG_FINAL_FLAG_SHIFT	15
 
+/* Error bits in FD CTRL */
+#define FD_CTRL_ERR_MASK	0x000000FF
+#define FD_CTRL_UFD		0x00000004
+#define FD_CTRL_SBE		0x00000008
+#define FD_CTRL_FLC		0x00000010
+#define FD_CTRL_FSE		0x00000020
+#define FD_CTRL_FAERR		0x00000040
+
+/* Annotation bits in FD CTRL */
+#define FD_CTRL_PTA		0x00800000
+#define FD_CTRL_PTV1		0x00400000
+
 enum dpaa2_fd_format {
 	dpaa2_fd_single = 0,
 	dpaa2_fd_list,