Commit 2053bc57 authored by Kirill A. Shutemov's avatar Kirill A. Shutemov Committed by Borislav Petkov (AMD)

efi: Add unaccepted memory support

efi_config_parse_tables() reserves memory that holds unaccepted memory
configuration table so it won't be reused by page allocator.

Core-mm requires few helpers to support unaccepted memory:

 - accept_memory() checks the range of addresses against the bitmap and
   accept memory if needed.

 - range_contains_unaccepted_memory() checks if anything within the
   range requires acceptance.

Architectural code has to provide efi_get_unaccepted_table() that
returns pointer to the unaccepted memory configuration table.

arch_accept_memory() handles arch-specific part of memory acceptance.
Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: default avatarBorislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: default avatarArd Biesheuvel <ardb@kernel.org>
Reviewed-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230606142637.5171-6-kirill.shutemov@linux.intel.com
parent 3fd1239a
......@@ -96,6 +96,9 @@ static const unsigned long * const efi_tables[] = {
#ifdef CONFIG_EFI_COCO_SECRET
&efi.coco_secret,
#endif
#ifdef CONFIG_UNACCEPTED_MEMORY
&efi.unaccepted,
#endif
};
u64 efi_setup; /* efi setup_data physical address */
......
......@@ -41,3 +41,4 @@ obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
obj-$(CONFIG_EFI_EARLYCON) += earlycon.o
obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
obj-$(CONFIG_UNACCEPTED_MEMORY) += unaccepted_memory.o
......@@ -50,6 +50,9 @@ struct efi __read_mostly efi = {
#ifdef CONFIG_EFI_COCO_SECRET
.coco_secret = EFI_INVALID_TABLE_ADDR,
#endif
#ifdef CONFIG_UNACCEPTED_MEMORY
.unaccepted = EFI_INVALID_TABLE_ADDR,
#endif
};
EXPORT_SYMBOL(efi);
......@@ -605,6 +608,9 @@ static const efi_config_table_type_t common_tables[] __initconst = {
#ifdef CONFIG_EFI_COCO_SECRET
{LINUX_EFI_COCO_SECRET_AREA_GUID, &efi.coco_secret, "CocoSecret" },
#endif
#ifdef CONFIG_UNACCEPTED_MEMORY
{LINUX_EFI_UNACCEPTED_MEM_TABLE_GUID, &efi.unaccepted, "Unaccepted" },
#endif
#ifdef CONFIG_EFI_GENERIC_STUB
{LINUX_EFI_SCREEN_INFO_TABLE_GUID, &screen_info_table },
#endif
......@@ -759,6 +765,25 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables,
}
}
if (IS_ENABLED(CONFIG_UNACCEPTED_MEMORY) &&
efi.unaccepted != EFI_INVALID_TABLE_ADDR) {
struct efi_unaccepted_memory *unaccepted;
unaccepted = early_memremap(efi.unaccepted, sizeof(*unaccepted));
if (unaccepted) {
unsigned long size;
if (unaccepted->version == 1) {
size = sizeof(*unaccepted) + unaccepted->size;
memblock_reserve(efi.unaccepted, size);
} else {
efi.unaccepted = EFI_INVALID_TABLE_ADDR;
}
early_memunmap(unaccepted, sizeof(*unaccepted));
}
}
return 0;
}
......
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/efi.h>
#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <asm/unaccepted_memory.h>
/* Protects unaccepted memory bitmap */
static DEFINE_SPINLOCK(unaccepted_memory_lock);
/*
* accept_memory() -- Consult bitmap and accept the memory if needed.
*
* Only memory that is explicitly marked as unaccepted in the bitmap requires
* an action. All the remaining memory is implicitly accepted and doesn't need
* acceptance.
*
* No need to accept:
* - anything if the system has no unaccepted table;
* - memory that is below phys_base;
* - memory that is above the memory that addressable by the bitmap;
*/
void accept_memory(phys_addr_t start, phys_addr_t end)
{
struct efi_unaccepted_memory *unaccepted;
unsigned long range_start, range_end;
unsigned long flags;
u64 unit_size;
unaccepted = efi_get_unaccepted_table();
if (!unaccepted)
return;
unit_size = unaccepted->unit_size;
/*
* Only care for the part of the range that is represented
* in the bitmap.
*/
if (start < unaccepted->phys_base)
start = unaccepted->phys_base;
if (end < unaccepted->phys_base)
return;
/* Translate to offsets from the beginning of the bitmap */
start -= unaccepted->phys_base;
end -= unaccepted->phys_base;
/* Make sure not to overrun the bitmap */
if (end > unaccepted->size * unit_size * BITS_PER_BYTE)
end = unaccepted->size * unit_size * BITS_PER_BYTE;
range_start = start / unit_size;
spin_lock_irqsave(&unaccepted_memory_lock, flags);
for_each_set_bitrange_from(range_start, range_end, unaccepted->bitmap,
DIV_ROUND_UP(end, unit_size)) {
unsigned long phys_start, phys_end;
unsigned long len = range_end - range_start;
phys_start = range_start * unit_size + unaccepted->phys_base;
phys_end = range_end * unit_size + unaccepted->phys_base;
arch_accept_memory(phys_start, phys_end);
bitmap_clear(unaccepted->bitmap, range_start, len);
}
spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
}
bool range_contains_unaccepted_memory(phys_addr_t start, phys_addr_t end)
{
struct efi_unaccepted_memory *unaccepted;
unsigned long flags;
bool ret = false;
u64 unit_size;
unaccepted = efi_get_unaccepted_table();
if (!unaccepted)
return false;
unit_size = unaccepted->unit_size;
/*
* Only care for the part of the range that is represented
* in the bitmap.
*/
if (start < unaccepted->phys_base)
start = unaccepted->phys_base;
if (end < unaccepted->phys_base)
return false;
/* Translate to offsets from the beginning of the bitmap */
start -= unaccepted->phys_base;
end -= unaccepted->phys_base;
/* Make sure not to overrun the bitmap */
if (end > unaccepted->size * unit_size * BITS_PER_BYTE)
end = unaccepted->size * unit_size * BITS_PER_BYTE;
spin_lock_irqsave(&unaccepted_memory_lock, flags);
while (start < end) {
if (test_bit(start / unit_size, unaccepted->bitmap)) {
ret = true;
break;
}
start += unit_size;
}
spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
return ret;
}
......@@ -646,6 +646,7 @@ extern struct efi {
unsigned long tpm_final_log; /* TPM2 Final Events Log table */
unsigned long mokvar_table; /* MOK variable config table */
unsigned long coco_secret; /* Confidential computing secret table */
unsigned long unaccepted; /* Unaccepted memory table */
efi_get_time_t *get_time;
efi_set_time_t *set_time;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment