Merge tag 'pwm/for-5.12-rc1' of...

Merge tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The ZTE ZX platform is being removed, so the PWM driver is no longer
  needed and removed as well.

  Other than that this contains a small set of fixes and cleanups across
  a couple of drivers"

* tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lpc18xx-sct: remove unneeded semicolon
  pwm: iqs620a: Correct a stale state variable
  pwm: iqs620a: Fix overflow and optimize calculations
  pwm: rockchip: Enable clock before calling clk_get_rate()
  pwm: rockchip: Eliminate potential race condition when probing
  pwm: rockchip: Replace "bus clk" with "PWM clk"
  pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
  pwm: rockchip: Enable APB clock during register access while probing
  pwm: Remove ZTE ZX driver

Documentation/devicetree/bindings/pwm/pwm-zx.txt

-ZTE ZX PWM controller
-
-Required properties:
- - compatible: Should be "zte,zx296718-pwm".
- - reg: Physical base address and length of the controller's registers.
- - clocks : The phandle and specifier referencing the controller's clocks.
- - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller.  The
-   PCLK is for register access, while WCLK is the reference clock for
-   calculating period and duty cycles.
- - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-   the cells format.
-
-Example:
-
-	pwm: pwm@1439000 {
-		compatible = "zte,zx296718-pwm";
-		reg = <0x1439000 0x1000>;
-		clocks = <&lsp1crm LSP1_PWM_PCLK>,
-			 <&lsp1crm LSP1_PWM_WCLK>;
-		clock-names = "pclk", "wclk";
-		#pwm-cells = <3>;
-	};

drivers/pwm/Kconfig

@@ -611,14 +611,4 @@ config PWM_VT8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-vt8500.
 
-config PWM_ZX
-	tristate "ZTE ZX PWM support"
-	depends on ARCH_ZX || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  Generic PWM framework driver for ZTE ZX family SoCs.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called pwm-zx.
-
 endif

drivers/pwm/Makefile

@@ -57,4 +57,3 @@ obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
-obj-$(CONFIG_PWM_ZX)		+= pwm-zx.o

drivers/pwm/pwm-iqs620a.c

@@ -37,16 +37,34 @@ struct iqs620_pwm_private {
 	struct pwm_chip chip;
 	struct notifier_block notifier;
 	struct mutex lock;
-	bool out_en;
-	u8 duty_val;
+	unsigned int duty_scale;
 };
 
+static int iqs620_pwm_init(struct iqs620_pwm_private *iqs620_pwm,
+			   unsigned int duty_scale)
+{
+	struct iqs62x_core *iqs62x = iqs620_pwm->iqs62x;
+	int ret;
+
+	if (!duty_scale)
+		return regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+					  IQS620_PWR_SETTINGS_PWM_OUT, 0);
+
+	ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
+			   duty_scale - 1);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
+				  IQS620_PWR_SETTINGS_PWM_OUT, 0xff);
+}
+
 static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			    const struct pwm_state *state)
 {
 	struct iqs620_pwm_private *iqs620_pwm;
-	struct iqs62x_core *iqs62x;
-	u64 duty_scale;
+	unsigned int duty_cycle;
+	unsigned int duty_scale;
 	int ret;
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
@@ -56,7 +74,6 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		return -EINVAL;
 
 	iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
-	iqs62x = iqs620_pwm->iqs62x;
 
 	/*
 	 * The duty cycle generated by the device is calculated as follows:
@@ -70,38 +87,18 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * For lower duty cycles (e.g. 0), the PWM output is simply disabled to
 	 * allow an external pull-down resistor to hold the GPIO3/LTX pin low.
 	 */
-	duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS);
-
-	mutex_lock(&iqs620_pwm->lock);
-
-	if (!state->enabled || !duty_scale) {
-		ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
-					 IQS620_PWR_SETTINGS_PWM_OUT, 0);
-		if (ret)
-			goto err_mutex;
-	}
+	duty_cycle = min_t(u64, state->duty_cycle, IQS620_PWM_PERIOD_NS);
+	duty_scale = duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
 
-	if (duty_scale) {
-		u8 duty_val = min_t(u64, duty_scale - 1, 0xff);
+	if (!state->enabled)
+		duty_scale = 0;
 
-		ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
-				   duty_val);
-		if (ret)
-			goto err_mutex;
-
-		iqs620_pwm->duty_val = duty_val;
-	}
-
-	if (state->enabled && duty_scale) {
-		ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
-					 IQS620_PWR_SETTINGS_PWM_OUT, 0xff);
-		if (ret)
-			goto err_mutex;
-	}
+	mutex_lock(&iqs620_pwm->lock);
 
-	iqs620_pwm->out_en = state->enabled;
+	ret = iqs620_pwm_init(iqs620_pwm, duty_scale);
+	if (!ret)
+		iqs620_pwm->duty_scale = duty_scale;
 
-err_mutex:
 	mutex_unlock(&iqs620_pwm->lock);
 
 	return ret;
@@ -119,12 +116,11 @@ static void iqs620_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	/*
 	 * Since the device cannot generate a 0% duty cycle, requests to do so
 	 * cause subsequent calls to iqs620_pwm_get_state to report the output
-	 * as disabled with duty cycle equal to that which was in use prior to
-	 * the request. This is not ideal, but is the best compromise based on
+	 * as disabled. This is not ideal, but is the best compromise based on
 	 * the capabilities of the device.
 	 */
-	state->enabled = iqs620_pwm->out_en;
-	state->duty_cycle = DIV_ROUND_UP((iqs620_pwm->duty_val + 1) *
+	state->enabled = iqs620_pwm->duty_scale > 0;
+	state->duty_cycle = DIV_ROUND_UP(iqs620_pwm->duty_scale *
 					 IQS620_PWM_PERIOD_NS, 256);
 
 	mutex_unlock(&iqs620_pwm->lock);
@@ -136,7 +132,6 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier,
 			       unsigned long event_flags, void *context)
 {
 	struct iqs620_pwm_private *iqs620_pwm;
-	struct iqs62x_core *iqs62x;
 	int ret;
 
 	if (!(event_flags & BIT(IQS62X_EVENT_SYS_RESET)))
@@ -144,7 +139,6 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier,
 
 	iqs620_pwm = container_of(notifier, struct iqs620_pwm_private,
 				  notifier);
-	iqs62x = iqs620_pwm->iqs62x;
 
 	mutex_lock(&iqs620_pwm->lock);
 
@@ -153,16 +147,8 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier,
 	 * of a device reset, so nothing else is printed here unless there is
 	 * an additional failure.
 	 */
-	ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
-			   iqs620_pwm->duty_val);
-	if (ret)
-		goto err_mutex;
+	ret = iqs620_pwm_init(iqs620_pwm, iqs620_pwm->duty_scale);
 
-	ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
-				 IQS620_PWR_SETTINGS_PWM_OUT,
-				 iqs620_pwm->out_en ? 0xff : 0);
-
-err_mutex:
 	mutex_unlock(&iqs620_pwm->lock);
 
 	if (ret) {
@@ -209,12 +195,14 @@ static int iqs620_pwm_probe(struct platform_device *pdev)
 	ret = regmap_read(iqs62x->regmap, IQS620_PWR_SETTINGS, &val);
 	if (ret)
 		return ret;
-	iqs620_pwm->out_en = val & IQS620_PWR_SETTINGS_PWM_OUT;
 
-	ret = regmap_read(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, &val);
-	if (ret)
-		return ret;
-	iqs620_pwm->duty_val = val;
+	if (val & IQS620_PWR_SETTINGS_PWM_OUT) {
+		ret = regmap_read(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, &val);
+		if (ret)
+			return ret;
+
+		iqs620_pwm->duty_scale = val + 1;
+	}
 
 	iqs620_pwm->chip.dev = &pdev->dev;
 	iqs620_pwm->chip.ops = &iqs620_pwm_ops;

drivers/pwm/pwm-lpc18xx-sct.c

@@ -289,7 +289,7 @@ static int lpc18xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 		dev_err(lpc18xx_pwm->dev,
 			"maximum number of simultaneous channels reached\n");
 		return -EBUSY;
-	};
+	}
 
 	set_bit(event, &lpc18xx_pwm->event_map);
 	lpc18xx_data->duty_event = event;

drivers/pwm/pwm-rockchip.c

@@ -72,6 +72,10 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip,
 	if (ret)
 		return;
 
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return;
+
 	clk_rate = clk_get_rate(pc->clk);
 
 	tmp = readl_relaxed(pc->base + pc->data->regs.period);
@@ -90,6 +94,7 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip,
 	else
 		state->polarity = PWM_POLARITY_NORMAL;
 
+	clk_disable(pc->clk);
 	clk_disable(pc->pclk);
 }
 
@@ -189,6 +194,10 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (ret)
 		return ret;
 
+	ret = clk_enable(pc->clk);
+	if (ret)
+		return ret;
+
 	pwm_get_state(pwm, &curstate);
 	enabled = curstate.enabled;
 
@@ -208,6 +217,7 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 out:
+	clk_disable(pc->clk);
 	clk_disable(pc->pclk);
 
 	return ret;
@@ -288,6 +298,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
 	u32 enable_conf, ctrl;
+	bool enabled;
 	int ret, count;
 
 	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
@@ -307,7 +318,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 		pc->clk = devm_clk_get(&pdev->dev, NULL);
 		if (IS_ERR(pc->clk))
 			return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
-					     "Can't get bus clk\n");
+					     "Can't get PWM clk\n");
 	}
 
 	count = of_count_phandle_with_args(pdev->dev.of_node,
@@ -326,13 +337,13 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 
 	ret = clk_prepare_enable(pc->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Can't prepare enable bus clk: %d\n", ret);
+		dev_err(&pdev->dev, "Can't prepare enable PWM clk: %d\n", ret);
 		return ret;
 	}
 
-	ret = clk_prepare(pc->pclk);
+	ret = clk_prepare_enable(pc->pclk);
 	if (ret) {
-		dev_err(&pdev->dev, "Can't prepare APB clk: %d\n", ret);
+		dev_err(&pdev->dev, "Can't prepare enable APB clk: %d\n", ret);
 		goto err_clk;
 	}
 
@@ -349,23 +360,26 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 		pc->chip.of_pwm_n_cells = 3;
 	}
 
+	enable_conf = pc->data->enable_conf;
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	enabled = (ctrl & enable_conf) == enable_conf;
+
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		clk_unprepare(pc->clk);
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 		goto err_pclk;
 	}
 
 	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
-	enable_conf = pc->data->enable_conf;
-	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
-	if ((ctrl & enable_conf) != enable_conf)
+	if (!enabled)
 		clk_disable(pc->clk);
 
+	clk_disable(pc->pclk);
+
 	return 0;
 
 err_pclk:
-	clk_unprepare(pc->pclk);
+	clk_disable_unprepare(pc->pclk);
 err_clk:
 	clk_disable_unprepare(pc->clk);
 

drivers/pwm/pwm-zx.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/slab.h>
-
-#define ZX_PWM_MODE		0x0
-#define ZX_PWM_CLKDIV_SHIFT	2
-#define ZX_PWM_CLKDIV_MASK	GENMASK(11, 2)
-#define ZX_PWM_CLKDIV(x)	(((x) << ZX_PWM_CLKDIV_SHIFT) & \
-					 ZX_PWM_CLKDIV_MASK)
-#define ZX_PWM_POLAR		BIT(1)
-#define ZX_PWM_EN		BIT(0)
-#define ZX_PWM_PERIOD		0x4
-#define ZX_PWM_DUTY		0x8
-
-#define ZX_PWM_CLKDIV_MAX	1023
-#define ZX_PWM_PERIOD_MAX	65535
-
-struct zx_pwm_chip {
-	struct pwm_chip chip;
-	struct clk *pclk;
-	struct clk *wclk;
-	void __iomem *base;
-};
-
-static inline struct zx_pwm_chip *to_zx_pwm_chip(struct pwm_chip *chip)
-{
-	return container_of(chip, struct zx_pwm_chip, chip);
-}
-
-static inline u32 zx_pwm_readl(struct zx_pwm_chip *zpc, unsigned int hwpwm,
-			       unsigned int offset)
-{
-	return readl(zpc->base + (hwpwm + 1) * 0x10 + offset);
-}
-
-static inline void zx_pwm_writel(struct zx_pwm_chip *zpc, unsigned int hwpwm,
-				 unsigned int offset, u32 value)
-{
-	writel(value, zpc->base + (hwpwm + 1) * 0x10 + offset);
-}
-
-static void zx_pwm_set_mask(struct zx_pwm_chip *zpc, unsigned int hwpwm,
-			    unsigned int offset, u32 mask, u32 value)
-{
-	u32 data;
-
-	data = zx_pwm_readl(zpc, hwpwm, offset);
-	data &= ~mask;
-	data |= value & mask;
-	zx_pwm_writel(zpc, hwpwm, offset, data);
-}
-
-static void zx_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
-			     struct pwm_state *state)
-{
-	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
-	unsigned long rate;
-	unsigned int div;
-	u32 value;
-	u64 tmp;
-
-	value = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_MODE);
-
-	if (value & ZX_PWM_POLAR)
-		state->polarity = PWM_POLARITY_NORMAL;
-	else
-		state->polarity = PWM_POLARITY_INVERSED;
-
-	if (value & ZX_PWM_EN)
-		state->enabled = true;
-	else
-		state->enabled = false;
-
-	div = (value & ZX_PWM_CLKDIV_MASK) >> ZX_PWM_CLKDIV_SHIFT;
-	rate = clk_get_rate(zpc->wclk);
-
-	tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_PERIOD);
-	tmp *= div * NSEC_PER_SEC;
-	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
-
-	tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_DUTY);
-	tmp *= div * NSEC_PER_SEC;
-	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
-}
-
-static int zx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			 unsigned int duty_ns, unsigned int period_ns)
-{
-	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
-	unsigned int period_cycles, duty_cycles;
-	unsigned long long c;
-	unsigned int div = 1;
-	unsigned long rate;
-
-	/* Find out the best divider */
-	rate = clk_get_rate(zpc->wclk);
-
-	while (1) {
-		c = rate / div;
-		c = c * period_ns;
-		do_div(c, NSEC_PER_SEC);
-
-		if (c < ZX_PWM_PERIOD_MAX)
-			break;
-
-		div++;
-
-		if (div > ZX_PWM_CLKDIV_MAX)
-			return -ERANGE;
-	}
-
-	/* Calculate duty cycles */
-	period_cycles = c;
-	c *= duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-	/*
-	 * If the PWM is being enabled, we have to temporarily disable it
-	 * before configuring the registers.
-	 */
-	if (pwm_is_enabled(pwm))
-		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_EN, 0);
-
-	/* Set up registers */
-	zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_CLKDIV_MASK,
-			ZX_PWM_CLKDIV(div));
-	zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_PERIOD, period_cycles);
-	zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_DUTY, duty_cycles);
-
-	/* Re-enable the PWM if needed */
-	if (pwm_is_enabled(pwm))
-		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
-				ZX_PWM_EN, ZX_PWM_EN);
-
-	return 0;
-}
-
-static int zx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
-			const struct pwm_state *state)
-{
-	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
-	struct pwm_state cstate;
-	int ret;
-
-	pwm_get_state(pwm, &cstate);
-
-	if (state->polarity != cstate.polarity)
-		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_POLAR,
-				(state->polarity == PWM_POLARITY_INVERSED) ?
-				 0 : ZX_PWM_POLAR);
-
-	if (state->period != cstate.period ||
-	    state->duty_cycle != cstate.duty_cycle) {
-		ret = zx_pwm_config(chip, pwm, state->duty_cycle,
-				    state->period);
-		if (ret)
-			return ret;
-	}
-
-	if (state->enabled != cstate.enabled) {
-		if (state->enabled) {
-			ret = clk_prepare_enable(zpc->wclk);
-			if (ret)
-				return ret;
-
-			zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
-					ZX_PWM_EN, ZX_PWM_EN);
-		} else {
-			zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
-					ZX_PWM_EN, 0);
-			clk_disable_unprepare(zpc->wclk);
-		}
-	}
-
-	return 0;
-}
-
-static const struct pwm_ops zx_pwm_ops = {
-	.apply = zx_pwm_apply,
-	.get_state = zx_pwm_get_state,
-	.owner = THIS_MODULE,
-};
-
-static int zx_pwm_probe(struct platform_device *pdev)
-{
-	struct zx_pwm_chip *zpc;
-	unsigned int i;
-	int ret;
-
-	zpc = devm_kzalloc(&pdev->dev, sizeof(*zpc), GFP_KERNEL);
-	if (!zpc)
-		return -ENOMEM;
-
-	zpc->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(zpc->base))
-		return PTR_ERR(zpc->base);
-
-	zpc->pclk = devm_clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(zpc->pclk))
-		return PTR_ERR(zpc->pclk);
-
-	zpc->wclk = devm_clk_get(&pdev->dev, "wclk");
-	if (IS_ERR(zpc->wclk))
-		return PTR_ERR(zpc->wclk);
-
-	ret = clk_prepare_enable(zpc->pclk);
-	if (ret)
-		return ret;
-
-	zpc->chip.dev = &pdev->dev;
-	zpc->chip.ops = &zx_pwm_ops;
-	zpc->chip.base = -1;
-	zpc->chip.npwm = 4;
-	zpc->chip.of_xlate = of_pwm_xlate_with_flags;
-	zpc->chip.of_pwm_n_cells = 3;
-
-	/*
-	 * PWM devices may be enabled by firmware, and let's disable all of
-	 * them initially to save power.
-	 */
-	for (i = 0; i < zpc->chip.npwm; i++)
-		zx_pwm_set_mask(zpc, i, ZX_PWM_MODE, ZX_PWM_EN, 0);
-
-	ret = pwmchip_add(&zpc->chip);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
-		clk_disable_unprepare(zpc->pclk);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, zpc);
-
-	return 0;
-}
-
-static int zx_pwm_remove(struct platform_device *pdev)
-{
-	struct zx_pwm_chip *zpc = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = pwmchip_remove(&zpc->chip);
-	clk_disable_unprepare(zpc->pclk);
-
-	return ret;
-}
-
-static const struct of_device_id zx_pwm_dt_ids[] = {
-	{ .compatible = "zte,zx296718-pwm", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, zx_pwm_dt_ids);
-
-static struct platform_driver zx_pwm_driver = {
-	.driver = {
-		.name = "zx-pwm",
-		.of_match_table = zx_pwm_dt_ids,
-	},
-	.probe = zx_pwm_probe,
-	.remove = zx_pwm_remove,
-};
-module_platform_driver(zx_pwm_driver);
-
-MODULE_ALIAS("platform:zx-pwm");
-MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
-MODULE_DESCRIPTION("ZTE ZX PWM Driver");
-MODULE_LICENSE("GPL v2");