Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x',...

Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', 'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next

Documentation/devicetree/bindings/sound/adi,axi-i2s.txt

+ADI AXI-I2S controller
+
+Required properties:
+ - compatible : Must be "adi,axi-i2s-1.00.a"
+ - reg : Must contain I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects two dma channels, one for transmit and one for
+   receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	i2s: i2s@0x77600000 {
+		compatible = "adi,axi-i2s-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>, <&ps7_dma 1>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

+ADI AXI-SPDIF controller
+
+Required properties:
+ - compatible : Must be "adi,axi-spdif-1.00.a"
+ - reg : Must contain SPDIF core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channel that is used by
+   the core. The core expects one dma channel for transmit.
+ - dma-names : Must be "tx"
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	spdif: spdif@0x77400000 {
+		compatible = "adi,axi-spdif-tx-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>;
+		dma-names = "tx";
+	};

Documentation/devicetree/bindings/sound/bcm2835-i2s.txt

+* Broadcom BCM2835 SoC I2S/PCM module
+
+Required properties:
+- compatible: "brcm,bcm2835-i2s"
+- reg: A list of base address and size entries:
+	* The first entry should cover the PCM registers
+	* The second entry should cover the PCM clock registers
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+	compatible = "brcm,bcm2835-i2s";
+	reg = <0x7e203000 0x20>,
+	      <0x7e101098 0x02>;
+
+	dmas = <&dma 2>,
+	       <&dma 3>;
+	dma-names = "tx", "rx";
+};

Documentation/devicetree/bindings/sound/cs42l52.txt

+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l52"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - cirrus,reset-gpio : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = (64xFs)/(N+2)
+  N = chgfreq_val
+  Fs = Sample Rate (variable)
+
+  - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+  as a differential input. If not present then the MICA input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+  as a differential input. If not present then the MICB input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+	compatible = "cirrus,cs42l52";
+	reg = <0x4a>;
+	reset-gpio = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.mica-differential-cfg;
+	cirrus,micbias-lvl = <5>;
+};

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -4,7 +4,8 @@ Required properties:
 - compatible :
 	"ti,dm646x-mcasp-audio"	: for DM646x platforms
 	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
-	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, TI81xx)
+	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
+	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
 
 - reg : Should contain reg specifiers for the entries in the reg-names property.
 - reg-names : Should contain:
@@ -36,7 +37,8 @@ Optional properties:
 - pinctrl-0: Should specify pin control group used for this controller.
 - pinctrl-names: Should contain only one value - "default", for more details
   		 please refer to pinctrl-bindings.txt
-  
+- fck_parent : Should contain a valid clock name which will be used as parent
+	       for the McASP fck
 
 Example:
 

Documentation/devicetree/bindings/sound/fsl-sai.txt

+Freescale Synchronous Audio Interface (SAI).
+
+The SAI is based on I2S module that used communicating with audio codecs,
+which provides a synchronous audio interface that supports fullduplex
+serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+codec/DSP interfaces.
+
+
+Required properties:
+- compatible: Compatible list, contains "fsl,vf610-sai".
+- reg: Offset and length of the register set for the device.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names : Must include the "sai" entry.
+- dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names : Two dmas have to be defined, "tx" and "rx".
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+  See ../pinctrl/pinctrl-bindings.txt for details of the property values.
+- big-endian-regs: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  device registers.
+- big-endian-data: If this property is absent, the little endian mode will
+  be in use as default, or the big endian mode will be in use for all the
+  fifo data.
+
+Example:
+sai2: sai@40031000 {
+	      compatible = "fsl,vf610-sai";
+	      reg = <0x40031000 0x1000>;
+	      pinctrl-names = "default";
+	      pinctrl-0 = <&pinctrl_sai2_1>;
+	      clocks = <&clks VF610_CLK_SAI2>;
+	      clock-names = "sai";
+	      dma-names = "tx", "rx";
+	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
+		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
+	      big-endian-regs;
+	      big-endian-data;
+};

Documentation/devicetree/bindings/sound/hdmi.txt

+Device-Tree bindings for dummy HDMI codec
+
+Required properties:
+	- compatible: should be "linux,hdmi-audio".
+
+CODEC output pins:
+  * TX
+
+CODEC input pins:
+  * RX
+
+Example node:
+
+	hdmi_audio: hdmi_audio@0 {
+		compatible = "linux,hdmi-audio";
+		status = "okay";
+	};

Documentation/devicetree/bindings/sound/max98090.txt

+MAX98090 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98090".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Pins on the device (for linking into audio routes):
+
+  * MIC1
+  * MIC2
+  * DMICL
+  * DMICR
+  * IN1
+  * IN2
+  * IN3
+  * IN4
+  * IN5
+  * IN6
+  * IN12
+  * IN34
+  * IN56
+  * HPL
+  * HPR
+  * SPKL
+  * SPKR
+  * RCVL
+  * RCVR
+  * MICBIAS
+
+Example:
+
+audio-codec@10 {
+	compatible = "maxim,max98090";
+	reg = <0x10>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt

+NVIDIA Tegra audio complex, with MAX98090 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-max98090"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the MAX98090's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphones
+  * Speakers
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-max98090-venice2",
+		     "nvidia,tegra-audio-max98090";
+	nvidia,model = "NVIDIA Tegra Venice2";
+
+	nvidia,audio-routing =
+		"Headphones", "HPR",
+		"Headphones", "HPL",
+		"Speakers", "SPKR",
+		"Speakers", "SPKL",
+		"Mic Jack", "MICBIAS",
+		"IN34", "Mic Jack";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&acodec>;
+
+	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+		 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};

Documentation/devicetree/bindings/sound/simple-card.txt

@@ -9,8 +9,13 @@ Required properties:
 Optional properties:
 
 - simple-audio-card,format		: CPU/CODEC common audio format.
-					"i2s", "right_j", "left_j" , "dsp_a"
-					"dsp_b", "ac97", "pdm", "msb", "lsb"
+					  "i2s", "right_j", "left_j" , "dsp_a"
+					  "dsp_b", "ac97", "pdm", "msb", "lsb"
+- simple-audio-routing			: A list of the connections between audio components.
+					  Each entry is a pair of strings, the first being the
+					  connection's sink, the second being the connection's
+					  source.
+
 Required subnodes:
 
 - simple-audio-card,cpu			: CPU   sub-node
@@ -38,6 +43,10 @@ Example:
 sound {
 	compatible = "simple-audio-card";
 	simple-audio-card,format = "left_j";
+	simple-audio-routing =
+		"MIC_IN", "Mic Jack",
+		"Headphone Jack", "HP_OUT",
+		"Ext Spk", "LINE_OUT";
 
 	simple-audio-card,cpu {
 		sound-dai = <&sh_fsi2 0>;

arch/arm/Kconfig

@@ -723,6 +723,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM

arch/arm/mach-s3c64xx/Kconfig

@@ -17,9 +17,10 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
+config S3C64XX_PL080
+	bool "S3C64XX DMA using generic PL08x driver"
+	select AMBA_PL08X
+	select SAMSUNG_DMADEV
 
 config S3C64XX_SETUP_SDHCI
 	bool

arch/arm/mach-s3c64xx/Makefile

@@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
 
 # Device support
 

arch/arm/mach-s3c64xx/common.h

@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
 static inline int s3c64xx_pm_late_initcall(void) { return 0; }
 #endif
 
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */

arch/arm/mach-s3c64xx/include/mach/dma.h

@@ -11,51 +11,48 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#define S3C_DMA_CHANNELS	(16)
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
 
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
 enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
+	DMACH_MAX = 32
+};
 
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
+struct s3c2410_dma_client {
+	char	*name;
 };
 
 static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void)
 
 static inline bool samsung_dma_is_dmadev(void)
 {
-	return false;
+	return true;
 }
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
 
-#include <plat/dma-core.h>
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
 
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c64xx/pl080.c

+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);

arch/arm/plat-samsung/devs.c

@@ -1468,6 +1468,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #elif defined(CONFIG_S3C24XX_DMAC)
 	pd.filter = s3c24xx_dma_filter;
 #endif
@@ -1509,8 +1511,10 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
@@ -1550,8 +1554,10 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+	pd.filter = pl08x_filter_id;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);

arch/arm/plat-samsung/dma-ops.c

@@ -18,6 +18,12 @@
 
 #include <mach/dma.h>
 
+#if defined(CONFIG_PL330_DMA)
+#define dma_filter pl330_filter
+#elif defined(CONFIG_S3C64XX_PL080)
+#define dma_filter pl08x_filter_id
+#endif
+
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				struct samsung_dma_req *param,
 				struct device *dev, char *ch_name)
@@ -30,7 +36,7 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 	if (dev->of_node)
 		return (unsigned)dma_request_slave_channel(dev, ch_name);
 	else
-		return (unsigned)dma_request_channel(mask, pl330_filter,
+		return (unsigned)dma_request_channel(mask, dma_filter,
 							(void *)dma_ch);
 }
 

drivers/clk/samsung/clk-s3c64xx.c

@@ -331,8 +331,8 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = {
 	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
 	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
-	ALIAS(HCLK_DMA1, NULL, "dma1"),
-	ALIAS(HCLK_DMA0, NULL, "dma0"),
+	ALIAS(HCLK_DMA1, "dma-pl080s.1", "apb_pclk"),
+	ALIAS(HCLK_DMA0, "dma-pl080s.0", "apb_pclk"),
 	ALIAS(HCLK_CAMIF, "s3c-camif", "camif"),
 	ALIAS(HCLK_LCD, "s3c-fb", "lcd"),
 	ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi"),

drivers/mfd/twl6040.c

@@ -44,6 +44,54 @@
 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 #define TWL6040_NUM_SUPPLIES	(2)
 
+static struct reg_default twl6040_defaults[] = {
+	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
+	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
+	{ 0x03, 0x00 }, /* REG_INTID	*/
+	{ 0x04, 0x00 }, /* REG_INTMR	*/
+	{ 0x05, 0x00 }, /* REG_NCPCTRL	*/
+	{ 0x06, 0x00 }, /* REG_LDOCTL	*/
+	{ 0x07, 0x60 }, /* REG_HPPLLCTL	*/
+	{ 0x08, 0x00 }, /* REG_LPPLLCTL	*/
+	{ 0x09, 0x4A }, /* REG_LPPLLDIV	*/
+	{ 0x0A, 0x00 }, /* REG_AMICBCTL	*/
+	{ 0x0B, 0x00 }, /* REG_DMICBCTL	*/
+	{ 0x0C, 0x00 }, /* REG_MICLCTL	*/
+	{ 0x0D, 0x00 }, /* REG_MICRCTL	*/
+	{ 0x0E, 0x00 }, /* REG_MICGAIN	*/
+	{ 0x0F, 0x1B }, /* REG_LINEGAIN	*/
+	{ 0x10, 0x00 }, /* REG_HSLCTL	*/
+	{ 0x11, 0x00 }, /* REG_HSRCTL	*/
+	{ 0x12, 0x00 }, /* REG_HSGAIN	*/
+	{ 0x13, 0x00 }, /* REG_EARCTL	*/
+	{ 0x14, 0x00 }, /* REG_HFLCTL	*/
+	{ 0x15, 0x00 }, /* REG_HFLGAIN	*/
+	{ 0x16, 0x00 }, /* REG_HFRCTL	*/
+	{ 0x17, 0x00 }, /* REG_HFRGAIN	*/
+	{ 0x18, 0x00 }, /* REG_VIBCTLL	*/
+	{ 0x19, 0x00 }, /* REG_VIBDATL	*/
+	{ 0x1A, 0x00 }, /* REG_VIBCTLR	*/
+	{ 0x1B, 0x00 }, /* REG_VIBDATR	*/
+	{ 0x1C, 0x00 }, /* REG_HKCTL1	*/
+	{ 0x1D, 0x00 }, /* REG_HKCTL2	*/
+	{ 0x1E, 0x00 }, /* REG_GPOCTL	*/
+	{ 0x1F, 0x00 }, /* REG_ALB	*/
+	{ 0x20, 0x00 }, /* REG_DLB	*/
+	/* 0x28, REG_TRIM1 */
+	/* 0x29, REG_TRIM2 */
+	/* 0x2A, REG_TRIM3 */
+	/* 0x2B, REG_HSOTRIM */
+	/* 0x2C, REG_HFOTRIM */
+	{ 0x2D, 0x08 }, /* REG_ACCCTL	*/
+	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
+};
+
+struct reg_default twl6040_patch[] = {
+	/* Select I2C bus access to dual access registers */
+	{ TWL6040_REG_ACCCTL, 0x09 },
+};
+
+
 static bool twl6040_has_vibra(struct device_node *node)
 {
 #ifdef CONFIG_OF
@@ -238,6 +286,9 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 		if (twl6040->power_count++)
 			goto out;
 
+		/* Allow writes to the chip */
+		regcache_cache_only(twl6040->regmap, false);
+
 		if (gpio_is_valid(twl6040->audpwron)) {
 			/* use automatic power-up sequence */
 			ret = twl6040_power_up_automatic(twl6040);
@@ -253,6 +304,10 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 				goto out;
 			}
 		}
+
+		/* Sync with the HW */
+		regcache_sync(twl6040->regmap);
+
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 		twl6040->sysclk = 19200000;
@@ -279,6 +334,11 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			/* use manual power-down sequence */
 			twl6040_power_down_manual(twl6040);
 		}
+
+		/* Set regmap to cache only and mark it as dirty */
+		regcache_cache_only(twl6040->regmap, true);
+		regcache_mark_dirty(twl6040->regmap);
+
 		twl6040->sysclk = 0;
 		twl6040->mclk = 0;
 	}
@@ -490,9 +550,24 @@ static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
 static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case TWL6040_REG_VIBCTLL:
-	case TWL6040_REG_VIBCTLR:
-	case TWL6040_REG_INTMR:
+	case TWL6040_REG_ASICID:
+	case TWL6040_REG_ASICREV:
+	case TWL6040_REG_INTID:
+	case TWL6040_REG_LPPLLCTL:
+	case TWL6040_REG_HPPLLCTL:
+	case TWL6040_REG_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TWL6040_REG_ASICID:
+	case TWL6040_REG_ASICREV:
+	case TWL6040_REG_STATUS:
 		return false;
 	default:
 		return true;
@@ -502,10 +577,15 @@ static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 static struct regmap_config twl6040_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+
+	.reg_defaults = twl6040_defaults,
+	.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
+
 	.max_register = TWL6040_REG_STATUS, /* 0x2e */
 
 	.readable_reg = twl6040_readable_reg,
 	.volatile_reg = twl6040_volatile_reg,
+	.writeable_reg = twl6040_writeable_reg,
 
 	.cache_type = REGCACHE_RBTREE,
 };
@@ -624,6 +704,8 @@ static int twl6040_probe(struct i2c_client *client,
 
 	/* dual-access registers controlled by I2C only */
 	twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
+	regmap_register_patch(twl6040->regmap, twl6040_patch,
+			      ARRAY_SIZE(twl6040_patch));
 
 	/*
 	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
@@ -656,6 +738,10 @@ static int twl6040_probe(struct i2c_client *client,
 	cell->name = "twl6040-gpo";
 	children++;
 
+	/* The chip is powered down so mark regmap to cache only and dirty */
+	regcache_cache_only(twl6040->regmap, true);
+	regcache_mark_dirty(twl6040->regmap);
+
 	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
 			      NULL, 0, NULL);
 	if (ret)

drivers/spi/Kconfig

@@ -395,7 +395,7 @@ config SPI_S3C24XX_FIQ
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
 	depends on PLAT_SAMSUNG
-	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C64XX_PL080 if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
 

include/linux/platform_data/asoc-ti-mcbsp.h

 /*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
  * Defines for Multi-Channel Buffered Serial Port
  *
  * Copyright (C) 2002 RidgeRun, Inc.
@@ -21,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
+#ifndef __ASOC_TI_MCBSP_H
+#define __ASOC_TI_MCBSP_H
 
 #include <linux/spinlock.h>
 #include <linux/clk.h>

include/linux/platform_data/davinci_asp.h

@@ -92,6 +92,7 @@ enum {
 	MCASP_VERSION_1 = 0,	/* DM646x */
 	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 	MCASP_VERSION_3,        /* TI81xx/AM33xx */
+	MCASP_VERSION_4,	/* DRA7xxx */
 };
 
 enum mcbsp_clk_input_pin {

include/sound/cs42l52.h

@@ -16,17 +16,11 @@ struct cs42l52_platform_data {
 	/* MICBIAS Level. Check datasheet Pg48 */
 	unsigned int micbias_lvl;
 
-	/* MICA mode selection 0=Single 1=Differential */
-	unsigned int mica_cfg;
+	/* MICA mode selection Differential or Single-ended */
+	bool mica_diff_cfg;
 
-	/* MICB mode selection 0=Single 1=Differential */
-	unsigned int micb_cfg;
-
-	/* MICA Select 0=MIC1A 1=MIC2A */
-	unsigned int mica_sel;
-
-	/* MICB Select 0=MIC2A 1=MIC2B */
-	unsigned int micb_sel;
+	/* MICB mode selection Differential or Single-ended */
+	bool micb_diff_cfg;
 
 	/* Charge Pump Freq. Check datasheet Pg73 */
 	unsigned int chgfreq;

include/sound/pcm_params.h

@@ -354,4 +354,16 @@ params_period_bytes(const struct snd_pcm_hw_params *p)
 		params_channels(p)) / 8;
 }
 
+static inline int
+params_width(const struct snd_pcm_hw_params *p)
+{
+	return snd_pcm_format_width(params_format(p));
+}
+
+static inline int
+params_physical_width(const struct snd_pcm_hw_params *p)
+{
+	return snd_pcm_format_physical_width(params_format(p));
+}
+
 #endif /* __SOUND_PCM_PARAMS_H */

include/sound/rcar_snd.h

@@ -18,7 +18,7 @@
 #define RSND_GEN1_ADG	1
 #define RSND_GEN1_SSI	2
 
-#define RSND_GEN2_SRU	0
+#define RSND_GEN2_SCU	0
 #define RSND_GEN2_ADG	1
 #define RSND_GEN2_SSIU	2
 #define RSND_GEN2_SSI	3
@@ -58,6 +58,7 @@ struct rsnd_ssi_platform_info {
 
 struct rsnd_scu_platform_info {
 	u32 flags;
+	u32 convert_rate; /* sampling rate convert */
 };
 
 /*

include/sound/soc.h

@@ -334,9 +334,7 @@ struct snd_soc_jack_pin;
 #include <sound/soc-dapm.h>
 #include <sound/soc-dpcm.h>
 
-#ifdef CONFIG_GPIOLIB
 struct snd_soc_jack_gpio;
-#endif
 
 typedef int (*hw_write_t)(void *,const char* ,int);
 
@@ -446,6 +444,17 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
 void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
+#else
+static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
+					 struct snd_soc_jack_gpio *gpios)
+{
+	return 0;
+}
+
+static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
+					   struct snd_soc_jack_gpio *gpios)
+{
+}
 #endif
 
 /* codec register bit access */
@@ -580,7 +589,6 @@ struct snd_soc_jack_zone {
  *		       to provide more complex checks (eg, reading an
  *		       ADC).
  */
-#ifdef CONFIG_GPIOLIB
 struct snd_soc_jack_gpio {
 	unsigned int gpio;
 	const char *name;
@@ -594,7 +602,6 @@ struct snd_soc_jack_gpio {
 
 	int (*jack_status_check)(void);
 };
-#endif
 
 struct snd_soc_jack {
 	struct mutex mutex;

include/sound/spear_dma.h

@@ -29,7 +29,6 @@ struct spear_dma_data {
 	dma_addr_t addr;
 	u32 max_burst;
 	enum dma_slave_buswidth addr_width;
-	bool (*filter)(struct dma_chan *chan, void *slave);
 };
 
 #endif /* SPEAR_DMA_H */

sound/soc/Kconfig

@@ -31,8 +31,10 @@ config SND_SOC_GENERIC_DMAENGINE_PCM
 	select SND_DMAENGINE_PCM
 
 # All the supported SoCs
+source "sound/soc/adi/Kconfig"
 source "sound/soc/atmel/Kconfig"
 source "sound/soc/au1x/Kconfig"
+source "sound/soc/bcm/Kconfig"
 source "sound/soc/blackfin/Kconfig"
 source "sound/soc/cirrus/Kconfig"
 source "sound/soc/davinci/Kconfig"
@@ -42,7 +44,7 @@ source "sound/soc/jz4740/Kconfig"
 source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/kirkwood/Kconfig"
-source "sound/soc/mid-x86/Kconfig"
+source "sound/soc/intel/Kconfig"
 source "sound/soc/mxs/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/samsung/Kconfig"

sound/soc/Makefile

@@ -8,15 +8,17 @@ endif
 obj-$(CONFIG_SND_SOC)	+= snd-soc-core.o
 obj-$(CONFIG_SND_SOC)	+= codecs/
 obj-$(CONFIG_SND_SOC)	+= generic/
+obj-$(CONFIG_SND_SOC)	+= adi/
 obj-$(CONFIG_SND_SOC)	+= atmel/
 obj-$(CONFIG_SND_SOC)	+= au1x/
+obj-$(CONFIG_SND_SOC)	+= bcm/
 obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= cirrus/
 obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= dwc/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= jz4740/
-obj-$(CONFIG_SND_SOC)	+= mid-x86/
+obj-$(CONFIG_SND_SOC)	+= intel/
 obj-$(CONFIG_SND_SOC)	+= mxs/
 obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/

sound/soc/adi/Kconfig

+config SND_SOC_ADI
+	tristate "Audio support for Analog Devices reference designs"
+	depends on MICROBLAZE || ARCH_ZYNQ || COMPILE_TEST
+	help
+	  Audio support for various reference designs by Analog Devices.
+
+config SND_SOC_ADI_AXI_I2S
+	tristate "AXI-I2S support"
+	depends on SND_SOC_ADI
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  ASoC driver for the Analog Devices AXI-I2S softcore peripheral.
+
+config SND_SOC_ADI_AXI_SPDIF
+	tristate "AXI-SPDIF support"
+	depends on SND_SOC_ADI
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  ASoC driver for the Analog Devices AXI-SPDIF softcore peripheral.

sound/soc/adi/Makefile

+snd-soc-adi-axi-i2s-objs := axi-i2s.o
+snd-soc-adi-axi-spdif-objs := axi-spdif.o
+
+obj-$(CONFIG_SND_SOC_ADI_AXI_I2S) += snd-soc-adi-axi-i2s.o
+obj-$(CONFIG_SND_SOC_ADI_AXI_SPDIF) += snd-soc-adi-axi-spdif.o

sound/soc/adi/axi-i2s.c

+/*
+ * Copyright (C) 2012-2013, Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#define AXI_I2S_REG_RESET	0x00
+#define AXI_I2S_REG_CTRL	0x04
+#define AXI_I2S_REG_CLK_CTRL	0x08
+#define AXI_I2S_REG_STATUS	0x10
+
+#define AXI_I2S_REG_RX_FIFO	0x28
+#define AXI_I2S_REG_TX_FIFO	0x2C
+
+#define AXI_I2S_RESET_GLOBAL	BIT(0)
+#define AXI_I2S_RESET_TX_FIFO	BIT(1)
+#define AXI_I2S_RESET_RX_FIFO	BIT(2)
+
+#define AXI_I2S_CTRL_TX_EN	BIT(0)
+#define AXI_I2S_CTRL_RX_EN	BIT(1)
+
+/* The frame size is configurable, but for now we always set it 64 bit */
+#define AXI_I2S_BITS_PER_FRAME 64
+
+struct axi_i2s {
+	struct regmap *regmap;
+	struct clk *clk;
+	struct clk *clk_ref;
+
+	struct snd_soc_dai_driver dai_driver;
+
+	struct snd_dmaengine_dai_dma_data capture_dma_data;
+	struct snd_dmaengine_dai_dma_data playback_dma_data;
+
+	struct snd_ratnum ratnum;
+	struct snd_pcm_hw_constraint_ratnums rate_constraints;
+};
+
+static int axi_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+	struct snd_soc_dai *dai)
+{
+	struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+	unsigned int mask, val;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		mask = AXI_I2S_CTRL_RX_EN;
+	else
+		mask = AXI_I2S_CTRL_TX_EN;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		val = mask;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(i2s->regmap, AXI_I2S_REG_CTRL, mask, val);
+
+	return 0;
+}
+
+static int axi_i2s_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+	unsigned int bclk_div, word_size;
+	unsigned int bclk_rate;
+
+	bclk_rate = params_rate(params) * AXI_I2S_BITS_PER_FRAME;
+
+	word_size = AXI_I2S_BITS_PER_FRAME / 2 - 1;
+	bclk_div = DIV_ROUND_UP(clk_get_rate(i2s->clk_ref), bclk_rate) / 2 - 1;
+
+	regmap_write(i2s->regmap, AXI_I2S_REG_CLK_CTRL, (word_size << 16) |
+		bclk_div);
+
+	return 0;
+}
+
+static int axi_i2s_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+	uint32_t mask;
+	int ret;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		mask = AXI_I2S_RESET_RX_FIFO;
+	else
+		mask = AXI_I2S_RESET_TX_FIFO;
+
+	regmap_write(i2s->regmap, AXI_I2S_REG_RESET, mask);
+
+	ret = snd_pcm_hw_constraint_ratnums(substream->runtime, 0,
+			   SNDRV_PCM_HW_PARAM_RATE,
+			   &i2s->rate_constraints);
+	if (ret)
+		return ret;
+
+	return clk_prepare_enable(i2s->clk_ref);
+}
+
+static void axi_i2s_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+	clk_disable_unprepare(i2s->clk_ref);
+}
+
+static int axi_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+	struct axi_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
+		&i2s->capture_dma_data);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops axi_i2s_dai_ops = {
+	.startup = axi_i2s_startup,
+	.shutdown = axi_i2s_shutdown,
+	.trigger = axi_i2s_trigger,
+	.hw_params = axi_i2s_hw_params,
+};
+
+static struct snd_soc_dai_driver axi_i2s_dai = {
+	.probe = axi_i2s_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE,
+	},
+	.ops = &axi_i2s_dai_ops,
+	.symmetric_rates = 1,
+};
+
+static const struct snd_soc_component_driver axi_i2s_component = {
+	.name = "axi-i2s",
+};
+
+static const struct regmap_config axi_i2s_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = AXI_I2S_REG_STATUS,
+};
+
+static int axi_i2s_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct axi_i2s *i2s;
+	void __iomem *base;
+	int ret;
+
+	i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
+	if (!i2s)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, i2s);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	i2s->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+		&axi_i2s_regmap_config);
+	if (IS_ERR(i2s->regmap))
+		return PTR_ERR(i2s->regmap);
+
+	i2s->clk = devm_clk_get(&pdev->dev, "axi");
+	if (IS_ERR(i2s->clk))
+		return PTR_ERR(i2s->clk);
+
+	i2s->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(i2s->clk_ref))
+		return PTR_ERR(i2s->clk_ref);
+
+	ret = clk_prepare_enable(i2s->clk);
+	if (ret)
+		return ret;
+
+	i2s->playback_dma_data.addr = res->start + AXI_I2S_REG_TX_FIFO;
+	i2s->playback_dma_data.addr_width = 4;
+	i2s->playback_dma_data.maxburst = 1;
+
+	i2s->capture_dma_data.addr = res->start + AXI_I2S_REG_RX_FIFO;
+	i2s->capture_dma_data.addr_width = 4;
+	i2s->capture_dma_data.maxburst = 1;
+
+	i2s->ratnum.num = clk_get_rate(i2s->clk_ref) / 2 / AXI_I2S_BITS_PER_FRAME;
+	i2s->ratnum.den_step = 1;
+	i2s->ratnum.den_min = 1;
+	i2s->ratnum.den_max = 64;
+
+	i2s->rate_constraints.rats = &i2s->ratnum;
+	i2s->rate_constraints.nrats = 1;
+
+	regmap_write(i2s->regmap, AXI_I2S_REG_RESET, AXI_I2S_RESET_GLOBAL);
+
+	ret = devm_snd_soc_register_component(&pdev->dev, &axi_i2s_component,
+					 &axi_i2s_dai, 1);
+	if (ret)
+		goto err_clk_disable;
+
+	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
+			SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
+	if (ret)
+		goto err_clk_disable;
+
+err_clk_disable:
+	clk_disable_unprepare(i2s->clk);
+	return ret;
+}
+
+static int axi_i2s_dev_remove(struct platform_device *pdev)
+{
+	struct axi_i2s *i2s = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2s->clk);
+
+	return 0;
+}
+
+static const struct of_device_id axi_i2s_of_match[] = {
+	{ .compatible = "adi,axi-i2s-1.00.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, axi_i2s_of_match);
+
+static struct platform_driver axi_i2s_driver = {
+	.driver = {
+		.name = "axi-i2s",
+		.owner = THIS_MODULE,
+		.of_match_table = axi_i2s_of_match,
+	},
+	.probe = axi_i2s_probe,
+	.remove = axi_i2s_dev_remove,
+};
+module_platform_driver(axi_i2s_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("AXI I2S driver");
+MODULE_LICENSE("GPL");

sound/soc/adi/axi-spdif.c

+/*
+ * Copyright (C) 2012-2013, Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/dmaengine_pcm.h>
+
+#define AXI_SPDIF_REG_CTRL	0x0
+#define AXI_SPDIF_REG_STAT	0x4
+#define AXI_SPDIF_REG_TX_FIFO	0xc
+
+#define AXI_SPDIF_CTRL_TXDATA BIT(1)
+#define AXI_SPDIF_CTRL_TXEN BIT(0)
+#define AXI_SPDIF_CTRL_CLKDIV_OFFSET 8
+#define AXI_SPDIF_CTRL_CLKDIV_MASK (0xff << 8)
+
+#define AXI_SPDIF_FREQ_44100	(0x0 << 6)
+#define AXI_SPDIF_FREQ_48000	(0x1 << 6)
+#define AXI_SPDIF_FREQ_32000	(0x2 << 6)
+#define AXI_SPDIF_FREQ_NA	(0x3 << 6)
+
+struct axi_spdif {
+	struct regmap *regmap;
+	struct clk *clk;
+	struct clk *clk_ref;
+
+	struct snd_dmaengine_dai_dma_data dma_data;
+
+	struct snd_ratnum ratnum;
+	struct snd_pcm_hw_constraint_ratnums rate_constraints;
+};
+
+static int axi_spdif_trigger(struct snd_pcm_substream *substream, int cmd,
+	struct snd_soc_dai *dai)
+{
+	struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
+	unsigned int val;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		val = AXI_SPDIF_CTRL_TXDATA;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
+		AXI_SPDIF_CTRL_TXDATA, val);
+
+	return 0;
+}
+
+static int axi_spdif_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
+	unsigned int rate = params_rate(params);
+	unsigned int clkdiv, stat;
+
+	switch (params_rate(params)) {
+	case 32000:
+		stat = AXI_SPDIF_FREQ_32000;
+		break;
+	case 44100:
+		stat = AXI_SPDIF_FREQ_44100;
+		break;
+	case 48000:
+		stat = AXI_SPDIF_FREQ_48000;
+		break;
+	default:
+		stat = AXI_SPDIF_FREQ_NA;
+		break;
+	}
+
+	clkdiv = DIV_ROUND_CLOSEST(clk_get_rate(spdif->clk_ref),
+			rate * 64 * 2) - 1;
+	clkdiv <<= AXI_SPDIF_CTRL_CLKDIV_OFFSET;
+
+	regmap_write(spdif->regmap, AXI_SPDIF_REG_STAT, stat);
+	regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
+		AXI_SPDIF_CTRL_CLKDIV_MASK, clkdiv);
+
+	return 0;
+}
+
+static int axi_spdif_dai_probe(struct snd_soc_dai *dai)
+{
+	struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_init_dma_data(dai, &spdif->dma_data, NULL);
+
+	return 0;
+}
+
+static int axi_spdif_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
+	int ret;
+
+	ret = snd_pcm_hw_constraint_ratnums(substream->runtime, 0,
+			   SNDRV_PCM_HW_PARAM_RATE,
+			   &spdif->rate_constraints);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(spdif->clk_ref);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
+		AXI_SPDIF_CTRL_TXEN, AXI_SPDIF_CTRL_TXEN);
+
+	return 0;
+}
+
+static void axi_spdif_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct axi_spdif *spdif = snd_soc_dai_get_drvdata(dai);
+
+	regmap_update_bits(spdif->regmap, AXI_SPDIF_REG_CTRL,
+		AXI_SPDIF_CTRL_TXEN, 0);
+
+	clk_disable_unprepare(spdif->clk_ref);
+}
+
+static const struct snd_soc_dai_ops axi_spdif_dai_ops = {
+	.startup = axi_spdif_startup,
+	.shutdown = axi_spdif_shutdown,
+	.trigger = axi_spdif_trigger,
+	.hw_params = axi_spdif_hw_params,
+};
+
+static struct snd_soc_dai_driver axi_spdif_dai = {
+	.probe = axi_spdif_dai_probe,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_KNOT,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops = &axi_spdif_dai_ops,
+};
+
+static const struct snd_soc_component_driver axi_spdif_component = {
+	.name = "axi-spdif",
+};
+
+static const struct regmap_config axi_spdif_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = AXI_SPDIF_REG_STAT,
+};
+
+static int axi_spdif_probe(struct platform_device *pdev)
+{
+	struct axi_spdif *spdif;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	spdif = devm_kzalloc(&pdev->dev, sizeof(*spdif), GFP_KERNEL);
+	if (!spdif)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, spdif);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	spdif->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					    &axi_spdif_regmap_config);
+	if (IS_ERR(spdif->regmap))
+		return PTR_ERR(spdif->regmap);
+
+	spdif->clk = devm_clk_get(&pdev->dev, "axi");
+	if (IS_ERR(spdif->clk))
+		return PTR_ERR(spdif->clk);
+
+	spdif->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(spdif->clk_ref))
+		return PTR_ERR(spdif->clk_ref);
+
+	ret = clk_prepare_enable(spdif->clk);
+	if (ret)
+		return ret;
+
+	spdif->dma_data.addr = res->start + AXI_SPDIF_REG_TX_FIFO;
+	spdif->dma_data.addr_width = 4;
+	spdif->dma_data.maxburst = 1;
+
+	spdif->ratnum.num = clk_get_rate(spdif->clk_ref) / 128;
+	spdif->ratnum.den_step = 1;
+	spdif->ratnum.den_min = 1;
+	spdif->ratnum.den_max = 64;
+
+	spdif->rate_constraints.rats = &spdif->ratnum;
+	spdif->rate_constraints.nrats = 1;
+
+	ret = devm_snd_soc_register_component(&pdev->dev, &axi_spdif_component,
+					 &axi_spdif_dai, 1);
+	if (ret)
+		goto err_clk_disable;
+
+	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL,
+			SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
+	if (ret)
+		goto err_clk_disable;
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(spdif->clk);
+	return ret;
+}
+
+static int axi_spdif_dev_remove(struct platform_device *pdev)
+{
+	struct axi_spdif *spdif = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(spdif->clk);
+
+	return 0;
+}
+
+static const struct of_device_id axi_spdif_of_match[] = {
+	{ .compatible = "adi,axi-spdif-tx-1.00.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, axi_spdif_of_match);
+
+static struct platform_driver axi_spdif_driver = {
+	.driver = {
+		.name = "axi-spdif",
+		.owner = THIS_MODULE,
+		.of_match_table = axi_spdif_of_match,
+	},
+	.probe = axi_spdif_probe,
+	.remove = axi_spdif_dev_remove,
+};
+module_platform_driver(axi_spdif_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("AXI SPDIF driver");
+MODULE_LICENSE("GPL");

sound/soc/atmel/sam9x5_wm8731.c

@@ -155,8 +155,6 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
 	of_node_put(codec_np);
 	of_node_put(cpu_np);
 
-	platform_set_drvdata(pdev, card);
-
 	ret = snd_soc_register_card(card);
 	if (ret) {
 		dev_err(&pdev->dev,

sound/soc/au1x/dbdma2.c

@@ -65,19 +65,10 @@ struct au1xpsc_audio_dmadata {
 #define AU1XPSC_PERIOD_MIN_BYTES	1024
 #define AU1XPSC_BUFFER_MIN_BYTES	65536
 
-#define AU1XPSC_PCM_FMTS					\
-	(SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_U8 |	\
-	 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |	\
-	 SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |	\
-	 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |	\
-	 SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE |	\
-	 0)
-
 /* PCM hardware DMA capabilities - platform specific */
 static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
 	.info		  = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
 			    SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
-	.formats	  = AU1XPSC_PCM_FMTS,
 	.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
 	.period_bytes_max = 4096 * 1024 - 1,
 	.periods_min	  = 2,

sound/soc/au1x/dma.c

@@ -21,14 +21,6 @@
 
 #include "psc.h"
 
-#define ALCHEMY_PCM_FMTS					\
-	(SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_U8 |	\
-	 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |	\
-	 SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |	\
-	 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |	\
-	 SNDRV_PCM_FMTBIT_U32_LE | SNDRV_PCM_FMTBIT_U32_BE |	\
-	 0)
-
 struct pcm_period {
 	u32 start;
 	u32 relative_end;	/* relative to start of buffer */
@@ -171,12 +163,6 @@ static irqreturn_t au1000_dma_interrupt(int irq, void *ptr)
 static const struct snd_pcm_hardware alchemy_pcm_hardware = {
 	.info		  = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
 			    SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
-	.formats	  = ALCHEMY_PCM_FMTS,
-	.rates		  = SNDRV_PCM_RATE_8000_192000,
-	.rate_min	  = SNDRV_PCM_RATE_8000,
-	.rate_max	  = SNDRV_PCM_RATE_192000,
-	.channels_min	  = 2,
-	.channels_max	  = 2,
 	.period_bytes_min = 1024,
 	.period_bytes_max = 16 * 1024 - 1,
 	.periods_min	  = 4,

sound/soc/bcm/Kconfig

+config SND_BCM2835_SOC_I2S
+	tristate "SoC Audio support for the Broadcom BCM2835 I2S module"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	select SND_SOC_DMAENGINE_PCM
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the BCM2835 I2S interface. You will also need
+	  to select the audio interfaces to support below.

sound/soc/bcm/Makefile

+# BCM2835 Platform Support
+snd-soc-bcm2835-i2s-objs := bcm2835-i2s.o
+
+obj-$(CONFIG_SND_BCM2835_SOC_I2S) += snd-soc-bcm2835-i2s.o
+

sound/soc/blackfin/bf5xx-ac97-pcm.c

@@ -107,7 +107,6 @@ static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
 #endif
 				   SNDRV_PCM_INFO_BLOCK_TRANSFER,
 
-	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
 	.period_bytes_min	= 32,
 	.period_bytes_max	= 0x10000,
 	.periods_min		= 1,

sound/soc/blackfin/bf5xx-i2s-pcm.c

@@ -52,9 +52,6 @@ static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
 	.info			= SNDRV_PCM_INFO_INTERLEAVED |
 				   SNDRV_PCM_INFO_MMAP_VALID |
 				   SNDRV_PCM_INFO_BLOCK_TRANSFER,
-	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
-				   SNDRV_PCM_FMTBIT_S24_LE |
-				   SNDRV_PCM_FMTBIT_S32_LE,
 	.period_bytes_min	= 32,
 	.period_bytes_max	= 0x10000,
 	.periods_min		= 1,

sound/soc/cirrus/edb93xx.c

@@ -63,7 +63,7 @@ static struct snd_soc_ops edb93xx_ops = {
 static struct snd_soc_dai_link edb93xx_dai = {
 	.name		= "CS4271",
 	.stream_name	= "CS4271 HiFi",
-	.platform_name	= "ep93xx-pcm-audio",
+	.platform_name	= "ep93xx-i2s",
 	.cpu_dai_name	= "ep93xx-i2s",
 	.codec_name	= "spi0.0",
 	.codec_dai_name	= "cs4271-hifi",

sound/soc/cirrus/ep93xx-ac97.c

@@ -19,11 +19,14 @@
 #include <linux/slab.h>
 
 #include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
 #include <sound/ac97_codec.h>
 #include <sound/soc.h>
 
 #include <linux/platform_data/dma-ep93xx.h>
 
+#include "ep93xx-pcm.h"
+
 /*
  * Per channel (1-4) registers.
  */
@@ -95,6 +98,8 @@ struct ep93xx_ac97_info {
 	struct device		*dev;
 	void __iomem		*regs;
 	struct completion	done;
+	struct snd_dmaengine_dai_dma_data dma_params_rx;
+	struct snd_dmaengine_dai_dma_data dma_params_tx;
 };
 
 /* currently ALSA only supports a single AC97 device */
@@ -315,8 +320,13 @@ static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
 
 static int ep93xx_ac97_dai_probe(struct snd_soc_dai *dai)
 {
-	dai->playback_dma_data = &ep93xx_ac97_pcm_out;
-	dai->capture_dma_data = &ep93xx_ac97_pcm_in;
+	struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
+
+	info->dma_params_tx.filter_data = &ep93xx_ac97_pcm_out;
+	info->dma_params_rx.filter_data = &ep93xx_ac97_pcm_in;
+
+	dai->playback_dma_data = &info->dma_params_tx;
+	dai->capture_dma_data = &info->dma_params_rx;
 
 	return 0;
 }
@@ -394,8 +404,14 @@ static int ep93xx_ac97_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
+	ret = devm_ep93xx_pcm_platform_register(&pdev->dev);
+	if (ret)
+		goto fail_unregister;
+
 	return 0;
 
+fail_unregister:
+	snd_soc_unregister_component(&pdev->dev);
 fail:
 	ep93xx_ac97_info = NULL;
 	snd_soc_set_ac97_ops(NULL);

sound/soc/cirrus/ep93xx-i2s.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 
 #include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/initval.h>
@@ -30,6 +31,8 @@
 #include <mach/ep93xx-regs.h>
 #include <linux/platform_data/dma-ep93xx.h>
 
+#include "ep93xx-pcm.h"
+
 #define EP93XX_I2S_TXCLKCFG		0x00
 #define EP93XX_I2S_RXCLKCFG		0x04
 #define EP93XX_I2S_GLCTRL		0x0C
@@ -61,6 +64,8 @@ struct ep93xx_i2s_info {
 	struct clk			*sclk;
 	struct clk			*lrclk;
 	void __iomem			*regs;
+	struct snd_dmaengine_dai_dma_data dma_params_rx;
+	struct snd_dmaengine_dai_dma_data dma_params_tx;
 };
 
 static struct ep93xx_dma_data ep93xx_i2s_dma_data[] = {
@@ -140,8 +145,15 @@ static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
 
 static int ep93xx_i2s_dai_probe(struct snd_soc_dai *dai)
 {
-	dai->playback_dma_data = &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_PLAYBACK];
-	dai->capture_dma_data = &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_CAPTURE];
+	struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
+
+	info->dma_params_tx.filter_data =
+		&ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_PLAYBACK];
+	info->dma_params_rx.filter_data =
+		&ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_CAPTURE];
+
+	dai->playback_dma_data = &info->dma_params_tx;
+	dai->capture_dma_data = &info->dma_params_rx;
 
 	return 0;
 }
@@ -405,8 +417,14 @@ static int ep93xx_i2s_probe(struct platform_device *pdev)
 	if (err)
 		goto fail_put_lrclk;
 
+	err = devm_ep93xx_pcm_platform_register(&pdev->dev);
+	if (err)
+		goto fail_unregister;
+
 	return 0;
 
+fail_unregister:
+	snd_soc_unregister_component(&pdev->dev);
 fail_put_lrclk:
 	clk_put(info->lrclk);
 fail_put_sclk:

sound/soc/cirrus/ep93xx-pcm.c

@@ -23,20 +23,13 @@
 
 #include <linux/platform_data/dma-ep93xx.h>
 
+#include "ep93xx-pcm.h"
+
 static const struct snd_pcm_hardware ep93xx_pcm_hardware = {
 	.info			= (SNDRV_PCM_INFO_MMAP		|
 				   SNDRV_PCM_INFO_MMAP_VALID	|
 				   SNDRV_PCM_INFO_INTERLEAVED	|
 				   SNDRV_PCM_INFO_BLOCK_TRANSFER),
-				   
-	.rates			= SNDRV_PCM_RATE_8000_192000,
-	.rate_min		= SNDRV_PCM_RATE_8000,
-	.rate_max		= SNDRV_PCM_RATE_192000,
-	
-	.formats		= (SNDRV_PCM_FMTBIT_S16_LE |
-				   SNDRV_PCM_FMTBIT_S24_LE |
-				   SNDRV_PCM_FMTBIT_S32_LE),
-	
 	.buffer_bytes_max	= 131072,
 	.period_bytes_min	= 32,
 	.period_bytes_max	= 32768,
@@ -57,53 +50,22 @@ static bool ep93xx_pcm_dma_filter(struct dma_chan *chan, void *filter_param)
 	return false;
 }
 
-static struct dma_chan *ep93xx_compat_request_channel(
-	struct snd_soc_pcm_runtime *rtd,
-	struct snd_pcm_substream *substream)
-{
-	struct snd_dmaengine_dai_dma_data *dma_data;
-
-	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	return snd_dmaengine_pcm_request_channel(ep93xx_pcm_dma_filter,
-						 dma_data);
-}
-
 static const struct snd_dmaengine_pcm_config ep93xx_dmaengine_pcm_config = {
 	.pcm_hardware = &ep93xx_pcm_hardware,
 	.compat_filter_fn = ep93xx_pcm_dma_filter,
-	.compat_request_channel = ep93xx_compat_request_channel,
 	.prealloc_buffer_size = 131072,
 };
 
-static int ep93xx_soc_platform_probe(struct platform_device *pdev)
+int devm_ep93xx_pcm_platform_register(struct device *dev)
 {
-	return snd_dmaengine_pcm_register(&pdev->dev,
+	return devm_snd_dmaengine_pcm_register(dev,
 		&ep93xx_dmaengine_pcm_config,
 		SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
 		SND_DMAENGINE_PCM_FLAG_NO_DT |
 		SND_DMAENGINE_PCM_FLAG_COMPAT);
 }
-
-static int ep93xx_soc_platform_remove(struct platform_device *pdev)
-{
-	snd_dmaengine_pcm_unregister(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver ep93xx_pcm_driver = {
-	.driver = {
-			.name = "ep93xx-pcm-audio",
-			.owner = THIS_MODULE,
-	},
-
-	.probe = ep93xx_soc_platform_probe,
-	.remove = ep93xx_soc_platform_remove,
-};
-
-module_platform_driver(ep93xx_pcm_driver);
+EXPORT_SYMBOL_GPL(devm_ep93xx_pcm_platform_register);
 
 MODULE_AUTHOR("Ryan Mallon");
 MODULE_DESCRIPTION("EP93xx ALSA PCM interface");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ep93xx-pcm-audio");

sound/soc/cirrus/ep93xx-pcm.h

+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __EP93XX_PCM_H__
+#define __EP93XX_PCM_H__
+
+int devm_ep93xx_pcm_platform_register(struct device *dev);
+
+#endif

sound/soc/cirrus/simone.c

@@ -27,7 +27,7 @@ static struct snd_soc_dai_link simone_dai = {
 	.cpu_dai_name	= "ep93xx-ac97",
 	.codec_dai_name	= "ac97-hifi",
 	.codec_name	= "ac97-codec",
-	.platform_name	= "ep93xx-pcm-audio",
+	.platform_name	= "ep93xx-ac97",
 };
 
 static struct snd_soc_card snd_soc_simone = {

sound/soc/cirrus/snappercl15.c

@@ -83,7 +83,7 @@ static struct snd_soc_dai_link snappercl15_dai = {
 	.cpu_dai_name	= "ep93xx-i2s",
 	.codec_dai_name	= "tlv320aic23-hifi",
 	.codec_name	= "tlv320aic23-codec.0-001a",
-	.platform_name	=  "ep93xx-pcm-audio",
+	.platform_name	= "ep93xx-i2s",
 	.init		= snappercl15_tlv320aic23_init,
 	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
 			  SND_SOC_DAIFMT_CBS_CFS,

sound/soc/codecs/Kconfig

@@ -163,8 +163,10 @@ config SND_SOC_WM_HUBS
 config SND_SOC_WM_ADSP
 	tristate
 	default y if SND_SOC_WM5102=y
+	default y if SND_SOC_WM5110=y
 	default y if SND_SOC_WM2200=y
 	default m if SND_SOC_WM5102=m
+	default m if SND_SOC_WM5110=m
 	default m if SND_SOC_WM2200=m
 
 config SND_SOC_AB8500_CODEC

sound/soc/codecs/ad1836.c

@@ -179,6 +179,8 @@ static int ad1836_hw_params(struct snd_pcm_substream *substream,
 	case SNDRV_PCM_FORMAT_S32_LE:
 		word_len = AD1836_WORD_LEN_24;
 		break;
+	default:
+		return -EINVAL;
 	}
 
 	regmap_update_bits(ad1836->regmap, AD1836_DAC_CTRL1,

sound/soc/codecs/ad193x.c

@@ -413,7 +413,7 @@ static struct spi_driver ad193x_spi_driver = {
 };
 #endif
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 
 static const struct regmap_config ad193x_i2c_regmap_config = {
 	.val_bits = 8,
@@ -470,7 +470,7 @@ static int __init ad193x_modinit(void)
 {
 	int ret;
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	ret =  i2c_add_driver(&ad193x_i2c_driver);
 	if (ret != 0) {
 		printk(KERN_ERR "Failed to register AD193X I2C driver: %d\n",
@@ -495,7 +495,7 @@ static void __exit ad193x_modexit(void)
 	spi_unregister_driver(&ad193x_spi_driver);
 #endif
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	i2c_del_driver(&ad193x_i2c_driver);
 #endif
 }

sound/soc/codecs/adav80x.c

@@ -939,7 +939,7 @@ static struct spi_driver adav80x_spi_driver = {
 };
 #endif
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 static const struct regmap_config adav80x_i2c_regmap_config = {
 	.val_bits = 8,
 	.pad_bits = 1,
@@ -985,7 +985,7 @@ static int __init adav80x_init(void)
 {
 	int ret = 0;
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	ret = i2c_add_driver(&adav80x_i2c_driver);
 	if (ret)
 		return ret;
@@ -1001,7 +1001,7 @@ module_init(adav80x_init);
 
 static void __exit adav80x_exit(void)
 {
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	i2c_del_driver(&adav80x_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)

sound/soc/codecs/ak4641.c

@@ -17,6 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -30,6 +31,7 @@
 
 /* codec private data */
 struct ak4641_priv {
+	struct regmap *regmap;
 	unsigned int sysclk;
 	int deemph;
 	int playback_fs;
@@ -38,12 +40,12 @@ struct ak4641_priv {
 /*
  * ak4641 register cache
  */
-static const u8 ak4641_reg[AK4641_CACHEREGNUM] = {
-	0x00, 0x80, 0x00, 0x80,
-	0x02, 0x00, 0x11, 0x05,
-	0x00, 0x00, 0x36, 0x10,
-	0x00, 0x00, 0x57, 0x00,
-	0x88, 0x88, 0x08, 0x08
+static const struct reg_default ak4641_reg_defaults[] = {
+	{  0, 0x00 }, {  1, 0x80 }, {  2, 0x00 }, {  3, 0x80 },
+	{  4, 0x02 }, {  5, 0x00 }, {  6, 0x11 }, {  7, 0x05 },
+	{  8, 0x00 }, {  9, 0x00 }, { 10, 0x36 }, { 11, 0x10 },
+	{ 12, 0x00 }, { 13, 0x00 }, { 14, 0x57 }, { 15, 0x00 },
+	{ 16, 0x88 }, { 17, 0x88 }, { 18, 0x08 }, { 19, 0x08 }
 };
 
 static const int deemph_settings[] = {44100, 0, 48000, 32000};
@@ -396,6 +398,7 @@ static int ak4641_mute(struct snd_soc_dai *dai, int mute)
 static int ak4641_set_bias_level(struct snd_soc_codec *codec,
 	enum snd_soc_bias_level level)
 {
+	struct ak4641_priv *ak4641 = snd_soc_codec_get_drvdata(codec);
 	struct ak4641_platform_data *pdata = codec->dev->platform_data;
 	int ret;
 
@@ -417,7 +420,7 @@ static int ak4641_set_bias_level(struct snd_soc_codec *codec,
 				gpio_set_value(pdata->gpio_npdn, 1);
 			mdelay(1);
 
-			ret = snd_soc_cache_sync(codec);
+			ret = regcache_sync(ak4641->regmap);
 			if (ret) {
 				dev_err(codec->dev,
 					"Failed to sync cache: %d\n", ret);
@@ -433,7 +436,7 @@ static int ak4641_set_bias_level(struct snd_soc_codec *codec,
 			gpio_set_value(pdata->gpio_npdn, 0);
 		if (pdata && gpio_is_valid(pdata->gpio_power))
 			gpio_set_value(pdata->gpio_power, 0);
-		codec->cache_sync = 1;
+		regcache_mark_dirty(ak4641->regmap);
 		break;
 	}
 	codec->dapm.bias_level = level;
@@ -518,7 +521,7 @@ static int ak4641_probe(struct snd_soc_codec *codec)
 {
 	int ret;
 
-	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 		return ret;
@@ -550,12 +553,17 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4641 = {
 	.dapm_routes		= ak4641_audio_map,
 	.num_dapm_routes	= ARRAY_SIZE(ak4641_audio_map),
 	.set_bias_level		= ak4641_set_bias_level,
-	.reg_cache_size		= ARRAY_SIZE(ak4641_reg),
-	.reg_word_size		= sizeof(u8),
-	.reg_cache_default	= ak4641_reg,
-	.reg_cache_step		= 1,
 };
 
+static const struct regmap_config ak4641_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = AK4641_BTIF,
+	.reg_defaults = ak4641_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(ak4641_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+};
 
 static int ak4641_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
@@ -569,6 +577,10 @@ static int ak4641_i2c_probe(struct i2c_client *i2c,
 	if (!ak4641)
 		return -ENOMEM;
 
+	ak4641->regmap = devm_regmap_init_i2c(i2c, &ak4641_regmap);
+	if (IS_ERR(ak4641->regmap))
+		return PTR_ERR(ak4641->regmap);
+
 	if (pdata) {
 		if (gpio_is_valid(pdata->gpio_power)) {
 			ret = gpio_request_one(pdata->gpio_power,

sound/soc/codecs/ak4642.c

@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/of_device.h>
 #include <linux/module.h>
+#include <linux/regmap.h>
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
@@ -198,30 +199,30 @@ static const struct snd_soc_dapm_route ak4642_intercon[] = {
 /*
  * ak4642 register cache
  */
-static const u8 ak4642_reg[] = {
-	0x00, 0x00, 0x01, 0x00,
-	0x02, 0x00, 0x00, 0x00,
-	0xe1, 0xe1, 0x18, 0x00,
-	0xe1, 0x18, 0x11, 0x08,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00,
+static const struct reg_default ak4642_reg[] = {
+	{  0, 0x00 }, {  1, 0x00 }, {  2, 0x01 }, {  3, 0x00 },
+	{  4, 0x02 }, {  5, 0x00 }, {  6, 0x00 }, {  7, 0x00 },
+	{  8, 0xe1 }, {  9, 0xe1 }, { 10, 0x18 }, { 11, 0x00 },
+	{ 12, 0xe1 }, { 13, 0x18 }, { 14, 0x11 }, { 15, 0x08 },
+	{ 16, 0x00 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x00 },
+	{ 20, 0x00 }, { 21, 0x00 }, { 22, 0x00 }, { 23, 0x00 },
+	{ 24, 0x00 }, { 25, 0x00 }, { 26, 0x00 }, { 27, 0x00 },
+	{ 28, 0x00 }, { 29, 0x00 }, { 30, 0x00 }, { 31, 0x00 },
+	{ 32, 0x00 }, { 33, 0x00 }, { 34, 0x00 }, { 35, 0x00 },
+	{ 36, 0x00 },
 };
 
-static const u8 ak4648_reg[] = {
-	0x00, 0x00, 0x01, 0x00,
-	0x02, 0x00, 0x00, 0x00,
-	0xe1, 0xe1, 0x18, 0x00,
-	0xe1, 0x18, 0x11, 0xb8,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	0x00, 0x88, 0x88, 0x08,
+static const struct reg_default ak4648_reg[] = {
+	{  0, 0x00 }, {  1, 0x00 }, {  2, 0x01 }, {  3, 0x00 },
+	{  4, 0x02 }, {  5, 0x00 }, {  6, 0x00 }, {  7, 0x00 },
+	{  8, 0xe1 }, {  9, 0xe1 }, { 10, 0x18 }, { 11, 0x00 },
+	{ 12, 0xe1 }, { 13, 0x18 }, { 14, 0x11 }, { 15, 0xb8 },
+	{ 16, 0x00 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x00 },
+	{ 20, 0x00 }, { 21, 0x00 }, { 22, 0x00 }, { 23, 0x00 },
+	{ 24, 0x00 }, { 25, 0x00 }, { 26, 0x00 }, { 27, 0x00 },
+	{ 28, 0x00 }, { 29, 0x00 }, { 30, 0x00 }, { 31, 0x00 },
+	{ 32, 0x00 }, { 33, 0x00 }, { 34, 0x00 }, { 35, 0x00 },
+	{ 36, 0x00 }, { 37, 0x88 }, { 38, 0x88 }, { 39, 0x08 },
 };
 
 static int ak4642_dai_startup(struct snd_pcm_substream *substream,
@@ -454,7 +455,10 @@ static struct snd_soc_dai_driver ak4642_dai = {
 
 static int ak4642_resume(struct snd_soc_codec *codec)
 {
-	snd_soc_cache_sync(codec);
+	struct regmap *regmap = dev_get_regmap(codec->dev, NULL);
+
+	regcache_mark_dirty(regmap);
+	regcache_sync(regmap);
 	return 0;
 }
 
@@ -463,15 +467,12 @@ static int ak4642_probe(struct snd_soc_codec *codec)
 {
 	int ret;
 
-	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP);
 	if (ret < 0) {
 		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 		return ret;
 	}
 
-	snd_soc_add_codec_controls(codec, ak4642_snd_controls,
-			     ARRAY_SIZE(ak4642_snd_controls));
-
 	ak4642_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	return 0;
@@ -488,55 +489,59 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4642 = {
 	.remove			= ak4642_remove,
 	.resume			= ak4642_resume,
 	.set_bias_level		= ak4642_set_bias_level,
-	.reg_cache_default	= ak4642_reg,			/* ak4642 reg */
-	.reg_cache_size		= ARRAY_SIZE(ak4642_reg),	/* ak4642 reg */
-	.reg_word_size		= sizeof(u8),
+	.controls		= ak4642_snd_controls,
+	.num_controls		= ARRAY_SIZE(ak4642_snd_controls),
 	.dapm_widgets		= ak4642_dapm_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(ak4642_dapm_widgets),
 	.dapm_routes		= ak4642_intercon,
 	.num_dapm_routes	= ARRAY_SIZE(ak4642_intercon),
 };
 
-static struct snd_soc_codec_driver soc_codec_dev_ak4648 = {
-	.probe			= ak4642_probe,
-	.remove			= ak4642_remove,
-	.resume			= ak4642_resume,
-	.set_bias_level		= ak4642_set_bias_level,
-	.reg_cache_default	= ak4648_reg,			/* ak4648 reg */
-	.reg_cache_size		= ARRAY_SIZE(ak4648_reg),	/* ak4648 reg */
-	.reg_word_size		= sizeof(u8),
-	.dapm_widgets		= ak4642_dapm_widgets,
-	.num_dapm_widgets	= ARRAY_SIZE(ak4642_dapm_widgets),
-	.dapm_routes		= ak4642_intercon,
-	.num_dapm_routes	= ARRAY_SIZE(ak4642_intercon),
+static const struct regmap_config ak4642_regmap = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= ARRAY_SIZE(ak4642_reg) + 1,
+	.reg_defaults		= ak4642_reg,
+	.num_reg_defaults	= ARRAY_SIZE(ak4642_reg),
+};
+
+static const struct regmap_config ak4648_regmap = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= ARRAY_SIZE(ak4648_reg) + 1,
+	.reg_defaults		= ak4648_reg,
+	.num_reg_defaults	= ARRAY_SIZE(ak4648_reg),
 };
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 static struct of_device_id ak4642_of_match[];
 static int ak4642_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct device_node *np = i2c->dev.of_node;
-	const struct snd_soc_codec_driver *driver;
+	const struct regmap_config *regmap_config = NULL;
+	struct regmap *regmap;
 
-	driver = NULL;
 	if (np) {
 		const struct of_device_id *of_id;
 
 		of_id = of_match_device(ak4642_of_match, &i2c->dev);
 		if (of_id)
-			driver = of_id->data;
+			regmap_config = of_id->data;
 	} else {
-		driver = (struct snd_soc_codec_driver *)id->driver_data;
+		regmap_config = (const struct regmap_config *)id->driver_data;
 	}
 
-	if (!driver) {
-		dev_err(&i2c->dev, "no driver\n");
+	if (!regmap_config) {
+		dev_err(&i2c->dev, "Unknown device type\n");
 		return -EINVAL;
 	}
 
+	regmap = devm_regmap_init_i2c(i2c, regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
 	return snd_soc_register_codec(&i2c->dev,
-				      driver, &ak4642_dai, 1);
+				      &soc_codec_dev_ak4642, &ak4642_dai, 1);
 }
 
 static int ak4642_i2c_remove(struct i2c_client *client)
@@ -546,17 +551,17 @@ static int ak4642_i2c_remove(struct i2c_client *client)
 }
 
 static struct of_device_id ak4642_of_match[] = {
-	{ .compatible = "asahi-kasei,ak4642",	.data = &soc_codec_dev_ak4642},
-	{ .compatible = "asahi-kasei,ak4643",	.data = &soc_codec_dev_ak4642},
-	{ .compatible = "asahi-kasei,ak4648",	.data = &soc_codec_dev_ak4648},
+	{ .compatible = "asahi-kasei,ak4642",	.data = &ak4642_regmap},
+	{ .compatible = "asahi-kasei,ak4643",	.data = &ak4642_regmap},
+	{ .compatible = "asahi-kasei,ak4648",	.data = &ak4648_regmap},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ak4642_of_match);
 
 static const struct i2c_device_id ak4642_i2c_id[] = {
-	{ "ak4642", (kernel_ulong_t)&soc_codec_dev_ak4642 },
-	{ "ak4643", (kernel_ulong_t)&soc_codec_dev_ak4642 },
-	{ "ak4648", (kernel_ulong_t)&soc_codec_dev_ak4648 },
+	{ "ak4642", (kernel_ulong_t)&ak4642_regmap },
+	{ "ak4643", (kernel_ulong_t)&ak4642_regmap },
+	{ "ak4648", (kernel_ulong_t)&ak4648_regmap },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ak4642_i2c_id);
@@ -571,27 +576,8 @@ static struct i2c_driver ak4642_i2c_driver = {
 	.remove		= ak4642_i2c_remove,
 	.id_table	= ak4642_i2c_id,
 };
-#endif
-
-static int __init ak4642_modinit(void)
-{
-	int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	ret = i2c_add_driver(&ak4642_i2c_driver);
-#endif
-	return ret;
 
-}
-module_init(ak4642_modinit);
-
-static void __exit ak4642_exit(void)
-{
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_del_driver(&ak4642_i2c_driver);
-#endif
-
-}
-module_exit(ak4642_exit);
+module_i2c_driver(ak4642_i2c_driver);
 
 MODULE_DESCRIPTION("Soc AK4642 driver");
 MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");

sound/soc/codecs/arizona.h

@@ -81,7 +81,7 @@ struct arizona_priv {
 	unsigned int spk_ena_pending:1;
 };
 
-#define ARIZONA_NUM_MIXER_INPUTS 99
+#define ARIZONA_NUM_MIXER_INPUTS 103
 
 extern const unsigned int arizona_mixer_tlv[];
 extern const char *arizona_mixer_texts[ARIZONA_NUM_MIXER_INPUTS];
@@ -186,6 +186,8 @@ extern const char *arizona_rate_text[ARIZONA_RATE_ENUM_SIZE];
 extern const int arizona_rate_val[ARIZONA_RATE_ENUM_SIZE];
 
 extern const struct soc_enum arizona_isrc_fsl[];
+extern const struct soc_enum arizona_isrc_fsh[];
+extern const struct soc_enum arizona_asrc_rate1;
 
 extern const struct soc_enum arizona_in_vi_ramp;
 extern const struct soc_enum arizona_in_vd_ramp;
@@ -199,6 +201,7 @@ extern const struct soc_enum arizona_lhpf3_mode;
 extern const struct soc_enum arizona_lhpf4_mode;
 
 extern const struct soc_enum arizona_ng_hold;
+extern const struct soc_enum arizona_in_hpf_cut_enum;
 extern const struct soc_enum arizona_in_dmic_osr[];
 
 extern int arizona_in_ev(struct snd_soc_dapm_widget *w,

sound/soc/codecs/cs4271.c

@@ -675,7 +675,7 @@ static struct spi_driver cs4271_spi_driver = {
 };
 #endif /* defined(CONFIG_SPI_MASTER) */
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 static const struct i2c_device_id cs4271_i2c_id[] = {
 	{"cs4271", 0},
 	{}
@@ -728,7 +728,7 @@ static struct i2c_driver cs4271_i2c_driver = {
 	.probe		= cs4271_i2c_probe,
 	.remove		= cs4271_i2c_remove,
 };
-#endif /* defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) */
+#endif /* IS_ENABLED(CONFIG_I2C) */
 
 /*
  * We only register our serial bus driver here without
@@ -741,7 +741,7 @@ static int __init cs4271_modinit(void)
 {
 	int ret;
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	ret = i2c_add_driver(&cs4271_i2c_driver);
 	if (ret) {
 		pr_err("Failed to register CS4271 I2C driver: %d\n", ret);
@@ -767,7 +767,7 @@ static void __exit cs4271_modexit(void)
 	spi_unregister_driver(&cs4271_spi_driver);
 #endif
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	i2c_del_driver(&cs4271_i2c_driver);
 #endif
 }

sound/soc/codecs/da7210.c

@@ -1188,7 +1188,7 @@ static struct snd_soc_codec_driver soc_codec_dev_da7210 = {
 	.num_dapm_routes	= ARRAY_SIZE(da7210_audio_map),
 };
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 
 static struct reg_default da7210_regmap_i2c_patch[] = {
 
@@ -1362,7 +1362,7 @@ static struct spi_driver da7210_spi_driver = {
 static int __init da7210_modinit(void)
 {
 	int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	ret = i2c_add_driver(&da7210_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)
@@ -1378,7 +1378,7 @@ module_init(da7210_modinit);
 
 static void __exit da7210_exit(void)
 {
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+#if IS_ENABLED(CONFIG_I2C)
 	i2c_del_driver(&da7210_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)

sound/soc/codecs/hdmi.c

@@ -20,6 +20,7 @@
  */
 #include <linux/module.h>
 #include <sound/soc.h>
+#include <linux/of_device.h>
 
 #define DRV_NAME "hdmi-audio-codec"
 
@@ -44,7 +45,7 @@ static struct snd_soc_dai_driver hdmi_codec_dai = {
 			SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
 			SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE |
-			SNDRV_PCM_FMTBIT_S24_LE,
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE,
 	},
 	.capture = {
 		.stream_name = "Capture",
@@ -60,6 +61,14 @@ static struct snd_soc_dai_driver hdmi_codec_dai = {
 
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id hdmi_audio_codec_ids[] = {
+	{ .compatible = "linux,hdmi-audio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hdmi_audio_codec_ids);
+#endif
+
 static struct snd_soc_codec_driver hdmi_codec = {
 	.dapm_widgets = hdmi_widgets,
 	.num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
@@ -83,6 +92,7 @@ static struct platform_driver hdmi_codec_driver = {
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(hdmi_audio_codec_ids),
 	},
 
 	.probe		= hdmi_codec_probe,

sound/soc/codecs/ssm2518.c

@@ -549,13 +549,13 @@ static int ssm2518_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
 		right_slot = 0;
 	} else {
 		/* We assume the left channel < right channel */
-		left_slot = ffs(tx_mask);
-		tx_mask &= ~(1 << tx_mask);
+		left_slot = __ffs(tx_mask);
+		tx_mask &= ~(1 << left_slot);
 		if (tx_mask == 0) {
 			right_slot = left_slot;
 		} else {
-			right_slot = ffs(tx_mask);
-			tx_mask &= ~(1 << tx_mask);
+			right_slot = __ffs(tx_mask);
+			tx_mask &= ~(1 << right_slot);
 		}
 	}