Skip to content

GitLab

Commit 587a9e1f authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k 

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
parents 0d7614f0 9e2760d1
Hide whitespace changes
Inline Side-by-side
Showing with 49 additions and 465 deletions
arch/blackfin/kernel/setup.c
View file @ 587a9e1f
......@@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on);
#ifdef CONFIG_MTD_UCLINUX
extern struct map_info uclinux_ram_map;
unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
unsigned long _ebss;
EXPORT_SYMBOL(memory_mtd_end);
EXPORT_SYMBOL(memory_mtd_start);
EXPORT_SYMBOL(mtd_size);
......
arch/m68k/Kconfig
View file @ 587a9e1f
......@@ -54,18 +54,6 @@ config ZONE_DMA
bool
default y
config CPU_HAS_NO_BITFIELDS
bool
config CPU_HAS_NO_MULDIV64
bool
config CPU_HAS_ADDRESS_SPACES
bool
config FPU
bool
config HZ
int
default 1000 if CLEOPATRA
......
arch/m68k/Kconfig.cpu
View file @ 587a9e1f
......@@ -37,6 +37,7 @@ config M68000
bool
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64
select CPU_HAS_NO_UNALIGNED
select GENERIC_CSUM
help
The Freescale (was Motorola) 68000 CPU is the first generation of
......@@ -48,6 +49,7 @@ config M68000
config MCPU32
bool
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_UNALIGNED
help
The Freescale (was then Motorola) CPU32 is a CPU core that is
based on the 68020 processor. For the most part it is used in
......@@ -376,6 +378,18 @@ config NODES_SHIFT
default "3"
depends on !SINGLE_MEMORY_CHUNK
config CPU_HAS_NO_BITFIELDS
bool
config CPU_HAS_NO_MULDIV64
bool
config CPU_HAS_NO_UNALIGNED
bool
config CPU_HAS_ADDRESS_SPACES
bool
config FPU
bool
......
arch/m68k/apollo/config.c
View file @ 587a9e1f
......@@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
timer_handler(irq, dev_id);
x=*(volatile unsigned char *)(timer+3);
x=*(volatile unsigned char *)(timer+5);
x = *(volatile unsigned char *)(apollo_timer + 3);
x = *(volatile unsigned char *)(apollo_timer + 5);
return IRQ_HANDLED;
}
......@@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
void dn_sched_init(irq_handler_t timer_routine)
{
/* program timer 1 */
*(volatile unsigned char *)(timer+3)=0x01;
*(volatile unsigned char *)(timer+1)=0x40;
*(volatile unsigned char *)(timer+5)=0x09;
*(volatile unsigned char *)(timer+7)=0xc4;
*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
*(volatile unsigned char *)(apollo_timer + 1) = 0x40;
*(volatile unsigned char *)(apollo_timer + 5) = 0x09;
*(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
/* enable IRQ of PIC B */
*(volatile unsigned char *)(pica+1)&=(~8);
#if 0
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
#endif
if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
......
arch/m68k/include/asm/Kbuild
View file @ 587a9e1f
include include/asm-generic/Kbuild.asm
header-y += cachectl.h
generic-y += bitsperlong.h
generic-y += cputime.h
generic-y += device.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += futex.h
generic-y += ioctl.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
generic-y += kvm_para.h
generic-y += local64.h
generic-y += local.h
generic-y += mman.h
generic-y += mutex.h
generic-y += percpu.h
generic-y += resource.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += siginfo.h
generic-y += statfs.h
generic-y += topology.h
generic-y += types.h
generic-y += word-at-a-time.h
generic-y += xor.h
arch/m68k/include/asm/MC68332.h deleted 100644 → 0
View file @ 0d7614f0
/* include/asm-m68knommu/MC68332.h: '332 control registers
*
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
*
*/
#ifndef _MC68332_H_
#define _MC68332_H_
#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
#define WORD_REF(addr) (*((volatile unsigned short*)addr))
#define PORTE_ADDR 0xfffa11
#define PORTE BYTE_REF(PORTE_ADDR)
#define DDRE_ADDR 0xfffa15
#define DDRE BYTE_REF(DDRE_ADDR)
#define PEPAR_ADDR 0xfffa17
#define PEPAR BYTE_REF(PEPAR_ADDR)
#define PORTF_ADDR 0xfffa19
#define PORTF BYTE_REF(PORTF_ADDR)
#define DDRF_ADDR 0xfffa1d
#define DDRF BYTE_REF(DDRF_ADDR)
#define PFPAR_ADDR 0xfffa1f
#define PFPAR BYTE_REF(PFPAR_ADDR)
#define PORTQS_ADDR 0xfffc15
#define PORTQS BYTE_REF(PORTQS_ADDR)
#define DDRQS_ADDR 0xfffc17
#define DDRQS BYTE_REF(DDRQS_ADDR)
#define PQSPAR_ADDR 0xfffc16
#define PQSPAR BYTE_REF(PQSPAR_ADDR)
#define CSPAR0_ADDR 0xFFFA44
#define CSPAR0 WORD_REF(CSPAR0_ADDR)
#define CSPAR1_ADDR 0xFFFA46
#define CSPAR1 WORD_REF(CSPAR1_ADDR)
#define CSARBT_ADDR 0xFFFA48
#define CSARBT WORD_REF(CSARBT_ADDR)
#define CSOPBT_ADDR 0xFFFA4A
#define CSOPBT WORD_REF(CSOPBT_ADDR)
#define CSBAR0_ADDR 0xFFFA4C
#define CSBAR0 WORD_REF(CSBAR0_ADDR)
#define CSOR0_ADDR 0xFFFA4E
#define CSOR0 WORD_REF(CSOR0_ADDR)
#define CSBAR1_ADDR 0xFFFA50
#define CSBAR1 WORD_REF(CSBAR1_ADDR)
#define CSOR1_ADDR 0xFFFA52
#define CSOR1 WORD_REF(CSOR1_ADDR)
#define CSBAR2_ADDR 0xFFFA54
#define CSBAR2 WORD_REF(CSBAR2_ADDR)
#define CSOR2_ADDR 0xFFFA56
#define CSOR2 WORD_REF(CSOR2_ADDR)
#define CSBAR3_ADDR 0xFFFA58
#define CSBAR3 WORD_REF(CSBAR3_ADDR)
#define CSOR3_ADDR 0xFFFA5A
#define CSOR3 WORD_REF(CSOR3_ADDR)
#define CSBAR4_ADDR 0xFFFA5C
#define CSBAR4 WORD_REF(CSBAR4_ADDR)
#define CSOR4_ADDR 0xFFFA5E
#define CSOR4 WORD_REF(CSOR4_ADDR)
#define CSBAR5_ADDR 0xFFFA60
#define CSBAR5 WORD_REF(CSBAR5_ADDR)
#define CSOR5_ADDR 0xFFFA62
#define CSOR5 WORD_REF(CSOR5_ADDR)
#define CSBAR6_ADDR 0xFFFA64
#define CSBAR6 WORD_REF(CSBAR6_ADDR)
#define CSOR6_ADDR 0xFFFA66
#define CSOR6 WORD_REF(CSOR6_ADDR)
#define CSBAR7_ADDR 0xFFFA68
#define CSBAR7 WORD_REF(CSBAR7_ADDR)
#define CSOR7_ADDR 0xFFFA6A
#define CSOR7 WORD_REF(CSOR7_ADDR)
#define CSBAR8_ADDR 0xFFFA6C
#define CSBAR8 WORD_REF(CSBAR8_ADDR)
#define CSOR8_ADDR 0xFFFA6E
#define CSOR8 WORD_REF(CSOR8_ADDR)
#define CSBAR9_ADDR 0xFFFA70
#define CSBAR9 WORD_REF(CSBAR9_ADDR)
#define CSOR9_ADDR 0xFFFA72
#define CSOR9 WORD_REF(CSOR9_ADDR)
#define CSBAR10_ADDR 0xFFFA74
#define CSBAR10 WORD_REF(CSBAR10_ADDR)
#define CSOR10_ADDR 0xFFFA76
#define CSOR10 WORD_REF(CSOR10_ADDR)
#define CSOR_MODE_ASYNC 0x0000
#define CSOR_MODE_SYNC 0x8000
#define CSOR_MODE_MASK 0x8000
#define CSOR_BYTE_DISABLE 0x0000
#define CSOR_BYTE_UPPER 0x4000
#define CSOR_BYTE_LOWER 0x2000
#define CSOR_BYTE_BOTH 0x6000
#define CSOR_BYTE_MASK 0x6000
#define CSOR_RW_RSVD 0x0000
#define CSOR_RW_READ 0x0800
#define CSOR_RW_WRITE 0x1000
#define CSOR_RW_BOTH 0x1800
#define CSOR_RW_MASK 0x1800
#define CSOR_STROBE_DS 0x0400
#define CSOR_STROBE_AS 0x0000
#define CSOR_STROBE_MASK 0x0400
#define CSOR_DSACK_WAIT(x) (wait << 6)
#define CSOR_DSACK_FTERM (14 << 6)
#define CSOR_DSACK_EXTERNAL (15 << 6)
#define CSOR_DSACK_MASK 0x03c0
#define CSOR_SPACE_CPU 0x0000
#define CSOR_SPACE_USER 0x0010
#define CSOR_SPACE_SU 0x0020
#define CSOR_SPACE_BOTH 0x0030
#define CSOR_SPACE_MASK 0x0030
#define CSOR_IPL_ALL 0x0000
#define CSOR_IPL_PRIORITY(x) (x << 1)
#define CSOR_IPL_MASK 0x000e
#define CSOR_AVEC_ON 0x0001
#define CSOR_AVEC_OFF 0x0000
#define CSOR_AVEC_MASK 0x0001
#define CSBAR_ADDR(x) ((addr >> 11) << 3)
#define CSBAR_ADDR_MASK 0xfff8
#define CSBAR_BLKSIZE_2K 0x0000
#define CSBAR_BLKSIZE_8K 0x0001
#define CSBAR_BLKSIZE_16K 0x0002
#define CSBAR_BLKSIZE_64K 0x0003
#define CSBAR_BLKSIZE_128K 0x0004
#define CSBAR_BLKSIZE_256K 0x0005
#define CSBAR_BLKSIZE_512K 0x0006
#define CSBAR_BLKSIZE_1M 0x0007
#define CSBAR_BLKSIZE_MASK 0x0007
#define CSPAR_DISC 0
#define CSPAR_ALT 1
#define CSPAR_CS8 2
#define CSPAR_CS16 3
#define CSPAR_MASK 3
#define CSPAR0_CSBOOT(x) (x << 0)
#define CSPAR0_CS0(x) (x << 2)
#define CSPAR0_CS1(x) (x << 4)
#define CSPAR0_CS2(x) (x << 6)
#define CSPAR0_CS3(x) (x << 8)
#define CSPAR0_CS4(x) (x << 10)
#define CSPAR0_CS5(x) (x << 12)
#define CSPAR1_CS6(x) (x << 0)
#define CSPAR1_CS7(x) (x << 2)
#define CSPAR1_CS8(x) (x << 4)
#define CSPAR1_CS9(x) (x << 6)
#define CSPAR1_CS10(x) (x << 8)
#endif
arch/m68k/include/asm/apollodma.h deleted 100644 → 0
View file @ 0d7614f0
/*
* linux/include/asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
*/
#ifndef _ASM_APOLLO_DMA_H
#define _ASM_APOLLO_DMA_H
#include <asm/apollohw.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
/*
* NOTES about DMA transfers:
*
* controller 1: channels 0-3, byte operations, ports 00-1F
* controller 2: channels 4-7, word operations, ports C0-DF
*
* - ALL registers are 8 bits only, regardless of transfer size
* - channel 4 is not used - cascades 1 into 2.
* - channels 0-3 are byte - addresses/counts are for physical bytes
* - channels 5-7 are word - addresses/counts are for physical words
* - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
* - transfer count loaded to registers is 1 less than actual count
* - controller 2 offsets are all even (2x offsets for controller 1)
* - page registers for 5-7 don't use data bit 0, represent 128K pages
* - page registers for 0-3 use bit 0, represent 64K pages
*
* DMA transfers are limited to the lower 16MB of _physical_ memory.
* Note that addresses loaded into registers must be _physical_ addresses,
* not logical addresses (which may differ if paging is active).
*
* Address mapping for channels 0-3:
*
* A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* P7 ... P0 A7 ... A0 A7 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Address mapping for channels 5-7:
*
* A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
* | ... | \ \ ... \ \ \ ... \ \
* | ... | \ \ ... \ \ \ ... \ (not used)
* | ... | \ \ ... \ \ \ ... \
* P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
* and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
* the hardware level, so odd-byte transfers aren't possible).
*
* Transfer count (_not # bytes_) is limited to 64K, represented as actual
* count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
* and up to 128K bytes may be transferred on channels 5-7 in one operation.
*
*/
#define MAX_DMA_CHANNELS 8
/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
/* DMA controller registers */
#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
#define DMA_AUTOINIT 0x10
#define DMA_8BIT 0
#define DMA_16BIT 1
#define DMA_BUSMASTER 2
extern spinlock_t dma_spin_lock;
static __inline__ unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
static __inline__ void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
/* enable/disable a specific DMA channel */
static __inline__ void enable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr, DMA1_MASK_REG);
else
dma_outb(dmanr & 3, DMA2_MASK_REG);
}
static __inline__ void disable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr | 4, DMA1_MASK_REG);
else
dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
}
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
* Use this once to initialize the FF to a known state.
* After that, keep track of it. :-)
* --- In order to do that, the DMA routines below should ---
* --- only be used while holding the DMA lock ! ---
*/
static __inline__ void clear_dma_ff(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(0, DMA1_CLEAR_FF_REG);
else
dma_outb(0, DMA2_CLEAR_FF_REG);
}
/* set mode (above) for a specific DMA channel */
static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
{
if (dmanr<=3)
dma_outb(mode | dmanr, DMA1_MODE_REG);
else
dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
}
/* Set transfer address & page bits for specific DMA channel.
* Assumes dma flipflop is clear.
*/
static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
{
if (dmanr <= 3) {
dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
} else {
dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
}
}
/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
* a specific DMA channel.
* You must ensure the parameters are valid.
* NOTE: from a manual: "the number of transfers is one more
* than the initial word count"! This is taken into account.
* Assumes dma flip-flop is clear.
* NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
*/
static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
{
count--;
if (dmanr <= 3) {
dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
} else {
dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
}
}
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
* still in progress will return unpredictable results.
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*
* Assumes DMA flip-flop is clear.
*/
static __inline__ int get_dma_residue(unsigned int dmanr)
{
unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
: ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
/* using short to get 16-bit wrap around */
unsigned short count;
count = 1 + dma_inb(io_port);
count += dma_inb(io_port) << 8;
return (dmanr<=3)? count : (count<<1);
}
/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
/* These are in arch/m68k/apollo/dma.c: */
extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
extern void dma_unmap_page(unsigned short dma_addr);
#endif /* _ASM_APOLLO_DMA_H */
arch/m68k/include/asm/apollohw.h
View file @ 587a9e1f
......@@ -98,7 +98,7 @@ extern u_long timer_physaddr;
#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
#define pica (IO_BASE + pica_physaddr)
#define picb (IO_BASE + picb_physaddr)
#define timer (IO_BASE + timer_physaddr)
#define apollo_timer (IO_BASE + timer_physaddr)
#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
......
arch/m68k/include/asm/bitsperlong.h deleted 100644 → 0
View file @ 0d7614f0
#include <asm-generic/bitsperlong.h>
arch/m68k/include/asm/cputime.h deleted 100644 → 0
View file @ 0d7614f0
#ifndef __M68K_CPUTIME_H
#define __M68K_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __M68K_CPUTIME_H */
arch/m68k/include/asm/delay.h
View file @ 587a9e1f
......@@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops)
extern void __bad_udelay(void);
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
#ifdef CONFIG_CPU_HAS_NO_MULDIV64
/*
* The simpler m68k and ColdFire processors do not have a 32*32->64
* multiply instruction. So we need to handle them a little differently.
......
arch/m68k/include/asm/device.h deleted 100644 → 0
View file @ 0d7614f0
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>
arch/m68k/include/asm/emergency-restart.h deleted 100644 → 0
View file @ 0d7614f0
#ifndef _ASM_EMERGENCY_RESTART_H
#define _ASM_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* _ASM_EMERGENCY_RESTART_H */
arch/m68k/include/asm/errno.h deleted 100644 → 0
View file @ 0d7614f0
#ifndef _M68K_ERRNO_H
#define _M68K_ERRNO_H
#include <asm-generic/errno.h>
#endif /* _M68K_ERRNO_H */
arch/m68k/include/asm/futex.h deleted 100644 → 0
View file @ 0d7614f0
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#include <asm-generic/futex.h>
#endif
arch/m68k/include/asm/ioctl.h deleted 100644 → 0
View file @ 0d7614f0
#include <asm-generic/ioctl.h>
arch/m68k/include/asm/ipcbuf.h deleted 100644 → 0
View file @ 0d7614f0
#include <asm-generic/ipcbuf.h>
arch/m68k/include/asm/irq_regs.h deleted 100644 → 0
View file @ 0d7614f0
#include <asm-generic/irq_regs.h>
arch/m68k/include/asm/kdebug.h deleted 100644 → 0
View file @ 0d7614f0
#include <asm-generic/kdebug.h>
arch/m68k/include/asm/kmap_types.h deleted 100644 → 0
View file @ 0d7614f0
#ifndef __ASM_M68K_KMAP_TYPES_H
#define __ASM_M68K_KMAP_TYPES_H
#include <asm-generic/kmap_types.h>
#endif /* __ASM_M68K_KMAP_TYPES_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7