Commit 587a9e1f authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
parents 0d7614f0 9e2760d1
...@@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); ...@@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on);
#ifdef CONFIG_MTD_UCLINUX #ifdef CONFIG_MTD_UCLINUX
extern struct map_info uclinux_ram_map; extern struct map_info uclinux_ram_map;
unsigned long memory_mtd_end, memory_mtd_start, mtd_size; unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
unsigned long _ebss;
EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_end);
EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(memory_mtd_start);
EXPORT_SYMBOL(mtd_size); EXPORT_SYMBOL(mtd_size);
......
...@@ -54,18 +54,6 @@ config ZONE_DMA ...@@ -54,18 +54,6 @@ config ZONE_DMA
bool bool
default y default y
config CPU_HAS_NO_BITFIELDS
bool
config CPU_HAS_NO_MULDIV64
bool
config CPU_HAS_ADDRESS_SPACES
bool
config FPU
bool
config HZ config HZ
int int
default 1000 if CLEOPATRA default 1000 if CLEOPATRA
......
...@@ -37,6 +37,7 @@ config M68000 ...@@ -37,6 +37,7 @@ config M68000
bool bool
select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64 select CPU_HAS_NO_MULDIV64
select CPU_HAS_NO_UNALIGNED
select GENERIC_CSUM select GENERIC_CSUM
help help
The Freescale (was Motorola) 68000 CPU is the first generation of The Freescale (was Motorola) 68000 CPU is the first generation of
...@@ -48,6 +49,7 @@ config M68000 ...@@ -48,6 +49,7 @@ config M68000
config MCPU32 config MCPU32
bool bool
select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_UNALIGNED
help help
The Freescale (was then Motorola) CPU32 is a CPU core that is The Freescale (was then Motorola) CPU32 is a CPU core that is
based on the 68020 processor. For the most part it is used in based on the 68020 processor. For the most part it is used in
...@@ -376,6 +378,18 @@ config NODES_SHIFT ...@@ -376,6 +378,18 @@ config NODES_SHIFT
default "3" default "3"
depends on !SINGLE_MEMORY_CHUNK depends on !SINGLE_MEMORY_CHUNK
config CPU_HAS_NO_BITFIELDS
bool
config CPU_HAS_NO_MULDIV64
bool
config CPU_HAS_NO_UNALIGNED
bool
config CPU_HAS_ADDRESS_SPACES
bool
config FPU config FPU
bool bool
......
...@@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) ...@@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
timer_handler(irq, dev_id); timer_handler(irq, dev_id);
x=*(volatile unsigned char *)(timer+3); x = *(volatile unsigned char *)(apollo_timer + 3);
x=*(volatile unsigned char *)(timer+5); x = *(volatile unsigned char *)(apollo_timer + 5);
return IRQ_HANDLED; return IRQ_HANDLED;
} }
...@@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) ...@@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
void dn_sched_init(irq_handler_t timer_routine) void dn_sched_init(irq_handler_t timer_routine)
{ {
/* program timer 1 */ /* program timer 1 */
*(volatile unsigned char *)(timer+3)=0x01; *(volatile unsigned char *)(apollo_timer + 3) = 0x01;
*(volatile unsigned char *)(timer+1)=0x40; *(volatile unsigned char *)(apollo_timer + 1) = 0x40;
*(volatile unsigned char *)(timer+5)=0x09; *(volatile unsigned char *)(apollo_timer + 5) = 0x09;
*(volatile unsigned char *)(timer+7)=0xc4; *(volatile unsigned char *)(apollo_timer + 7) = 0xc4;
/* enable IRQ of PIC B */ /* enable IRQ of PIC B */
*(volatile unsigned char *)(pica+1)&=(~8); *(volatile unsigned char *)(pica+1)&=(~8);
#if 0 #if 0
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
#endif #endif
if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
......
include include/asm-generic/Kbuild.asm include include/asm-generic/Kbuild.asm
header-y += cachectl.h header-y += cachectl.h
generic-y += bitsperlong.h
generic-y += cputime.h
generic-y += device.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += futex.h
generic-y += ioctl.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
generic-y += kvm_para.h
generic-y += local64.h
generic-y += local.h
generic-y += mman.h
generic-y += mutex.h
generic-y += percpu.h
generic-y += resource.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += siginfo.h
generic-y += statfs.h
generic-y += topology.h
generic-y += types.h
generic-y += word-at-a-time.h generic-y += word-at-a-time.h
generic-y += xor.h
/* include/asm-m68knommu/MC68332.h: '332 control registers
*
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
*
*/
#ifndef _MC68332_H_
#define _MC68332_H_
#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
#define WORD_REF(addr) (*((volatile unsigned short*)addr))
#define PORTE_ADDR 0xfffa11
#define PORTE BYTE_REF(PORTE_ADDR)
#define DDRE_ADDR 0xfffa15
#define DDRE BYTE_REF(DDRE_ADDR)
#define PEPAR_ADDR 0xfffa17
#define PEPAR BYTE_REF(PEPAR_ADDR)
#define PORTF_ADDR 0xfffa19
#define PORTF BYTE_REF(PORTF_ADDR)
#define DDRF_ADDR 0xfffa1d
#define DDRF BYTE_REF(DDRF_ADDR)
#define PFPAR_ADDR 0xfffa1f
#define PFPAR BYTE_REF(PFPAR_ADDR)
#define PORTQS_ADDR 0xfffc15
#define PORTQS BYTE_REF(PORTQS_ADDR)
#define DDRQS_ADDR 0xfffc17
#define DDRQS BYTE_REF(DDRQS_ADDR)
#define PQSPAR_ADDR 0xfffc16
#define PQSPAR BYTE_REF(PQSPAR_ADDR)
#define CSPAR0_ADDR 0xFFFA44
#define CSPAR0 WORD_REF(CSPAR0_ADDR)
#define CSPAR1_ADDR 0xFFFA46
#define CSPAR1 WORD_REF(CSPAR1_ADDR)
#define CSARBT_ADDR 0xFFFA48
#define CSARBT WORD_REF(CSARBT_ADDR)
#define CSOPBT_ADDR 0xFFFA4A
#define CSOPBT WORD_REF(CSOPBT_ADDR)
#define CSBAR0_ADDR 0xFFFA4C
#define CSBAR0 WORD_REF(CSBAR0_ADDR)
#define CSOR0_ADDR 0xFFFA4E
#define CSOR0 WORD_REF(CSOR0_ADDR)
#define CSBAR1_ADDR 0xFFFA50
#define CSBAR1 WORD_REF(CSBAR1_ADDR)
#define CSOR1_ADDR 0xFFFA52
#define CSOR1 WORD_REF(CSOR1_ADDR)
#define CSBAR2_ADDR 0xFFFA54
#define CSBAR2 WORD_REF(CSBAR2_ADDR)
#define CSOR2_ADDR 0xFFFA56
#define CSOR2 WORD_REF(CSOR2_ADDR)
#define CSBAR3_ADDR 0xFFFA58
#define CSBAR3 WORD_REF(CSBAR3_ADDR)
#define CSOR3_ADDR 0xFFFA5A
#define CSOR3 WORD_REF(CSOR3_ADDR)
#define CSBAR4_ADDR 0xFFFA5C
#define CSBAR4 WORD_REF(CSBAR4_ADDR)
#define CSOR4_ADDR 0xFFFA5E
#define CSOR4 WORD_REF(CSOR4_ADDR)
#define CSBAR5_ADDR 0xFFFA60
#define CSBAR5 WORD_REF(CSBAR5_ADDR)
#define CSOR5_ADDR 0xFFFA62
#define CSOR5 WORD_REF(CSOR5_ADDR)
#define CSBAR6_ADDR 0xFFFA64
#define CSBAR6 WORD_REF(CSBAR6_ADDR)
#define CSOR6_ADDR 0xFFFA66
#define CSOR6 WORD_REF(CSOR6_ADDR)
#define CSBAR7_ADDR 0xFFFA68
#define CSBAR7 WORD_REF(CSBAR7_ADDR)
#define CSOR7_ADDR 0xFFFA6A
#define CSOR7 WORD_REF(CSOR7_ADDR)
#define CSBAR8_ADDR 0xFFFA6C
#define CSBAR8 WORD_REF(CSBAR8_ADDR)
#define CSOR8_ADDR 0xFFFA6E
#define CSOR8 WORD_REF(CSOR8_ADDR)
#define CSBAR9_ADDR 0xFFFA70
#define CSBAR9 WORD_REF(CSBAR9_ADDR)
#define CSOR9_ADDR 0xFFFA72
#define CSOR9 WORD_REF(CSOR9_ADDR)
#define CSBAR10_ADDR 0xFFFA74
#define CSBAR10 WORD_REF(CSBAR10_ADDR)
#define CSOR10_ADDR 0xFFFA76
#define CSOR10 WORD_REF(CSOR10_ADDR)
#define CSOR_MODE_ASYNC 0x0000
#define CSOR_MODE_SYNC 0x8000
#define CSOR_MODE_MASK 0x8000
#define CSOR_BYTE_DISABLE 0x0000
#define CSOR_BYTE_UPPER 0x4000
#define CSOR_BYTE_LOWER 0x2000
#define CSOR_BYTE_BOTH 0x6000
#define CSOR_BYTE_MASK 0x6000
#define CSOR_RW_RSVD 0x0000
#define CSOR_RW_READ 0x0800
#define CSOR_RW_WRITE 0x1000
#define CSOR_RW_BOTH 0x1800
#define CSOR_RW_MASK 0x1800
#define CSOR_STROBE_DS 0x0400
#define CSOR_STROBE_AS 0x0000
#define CSOR_STROBE_MASK 0x0400
#define CSOR_DSACK_WAIT(x) (wait << 6)
#define CSOR_DSACK_FTERM (14 << 6)
#define CSOR_DSACK_EXTERNAL (15 << 6)
#define CSOR_DSACK_MASK 0x03c0
#define CSOR_SPACE_CPU 0x0000
#define CSOR_SPACE_USER 0x0010
#define CSOR_SPACE_SU 0x0020
#define CSOR_SPACE_BOTH 0x0030
#define CSOR_SPACE_MASK 0x0030
#define CSOR_IPL_ALL 0x0000
#define CSOR_IPL_PRIORITY(x) (x << 1)
#define CSOR_IPL_MASK 0x000e
#define CSOR_AVEC_ON 0x0001
#define CSOR_AVEC_OFF 0x0000
#define CSOR_AVEC_MASK 0x0001
#define CSBAR_ADDR(x) ((addr >> 11) << 3)
#define CSBAR_ADDR_MASK 0xfff8
#define CSBAR_BLKSIZE_2K 0x0000
#define CSBAR_BLKSIZE_8K 0x0001
#define CSBAR_BLKSIZE_16K 0x0002
#define CSBAR_BLKSIZE_64K 0x0003
#define CSBAR_BLKSIZE_128K 0x0004
#define CSBAR_BLKSIZE_256K 0x0005
#define CSBAR_BLKSIZE_512K 0x0006
#define CSBAR_BLKSIZE_1M 0x0007
#define CSBAR_BLKSIZE_MASK 0x0007
#define CSPAR_DISC 0
#define CSPAR_ALT 1
#define CSPAR_CS8 2
#define CSPAR_CS16 3
#define CSPAR_MASK 3
#define CSPAR0_CSBOOT(x) (x << 0)
#define CSPAR0_CS0(x) (x << 2)
#define CSPAR0_CS1(x) (x << 4)
#define CSPAR0_CS2(x) (x << 6)
#define CSPAR0_CS3(x) (x << 8)
#define CSPAR0_CS4(x) (x << 10)
#define CSPAR0_CS5(x) (x << 12)
#define CSPAR1_CS6(x) (x << 0)
#define CSPAR1_CS7(x) (x << 2)
#define CSPAR1_CS8(x) (x << 4)
#define CSPAR1_CS9(x) (x << 6)
#define CSPAR1_CS10(x) (x << 8)
#endif
/*
* linux/include/asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
*/
#ifndef _ASM_APOLLO_DMA_H
#define _ASM_APOLLO_DMA_H
#include <asm/apollohw.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE)))
/*
* NOTES about DMA transfers:
*
* controller 1: channels 0-3, byte operations, ports 00-1F
* controller 2: channels 4-7, word operations, ports C0-DF
*
* - ALL registers are 8 bits only, regardless of transfer size
* - channel 4 is not used - cascades 1 into 2.
* - channels 0-3 are byte - addresses/counts are for physical bytes
* - channels 5-7 are word - addresses/counts are for physical words
* - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
* - transfer count loaded to registers is 1 less than actual count
* - controller 2 offsets are all even (2x offsets for controller 1)
* - page registers for 5-7 don't use data bit 0, represent 128K pages
* - page registers for 0-3 use bit 0, represent 64K pages
*
* DMA transfers are limited to the lower 16MB of _physical_ memory.
* Note that addresses loaded into registers must be _physical_ addresses,
* not logical addresses (which may differ if paging is active).
*
* Address mapping for channels 0-3:
*
* A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* P7 ... P0 A7 ... A0 A7 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Address mapping for channels 5-7:
*
* A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
* | ... | \ \ ... \ \ \ ... \ \
* | ... | \ \ ... \ \ \ ... \ (not used)
* | ... | \ \ ... \ \ \ ... \
* P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
* and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
* the hardware level, so odd-byte transfers aren't possible).
*
* Transfer count (_not # bytes_) is limited to 64K, represented as actual
* count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
* and up to 128K bytes may be transferred on channels 5-7 in one operation.
*
*/
#define MAX_DMA_CHANNELS 8
/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
/* DMA controller registers */
#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */
#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */
#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */
#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */
#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */
#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */
#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */
#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */
#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */
#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */
#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */
#define DMA_ADDR_1 (IO_DMA1_BASE+0x02)
#define DMA_ADDR_2 (IO_DMA1_BASE+0x04)
#define DMA_ADDR_3 (IO_DMA1_BASE+0x06)
#define DMA_ADDR_4 (IO_DMA2_BASE+0x00)
#define DMA_ADDR_5 (IO_DMA2_BASE+0x04)
#define DMA_ADDR_6 (IO_DMA2_BASE+0x08)
#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C)
#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */
#define DMA_CNT_1 (IO_DMA1_BASE+0x03)
#define DMA_CNT_2 (IO_DMA1_BASE+0x05)
#define DMA_CNT_3 (IO_DMA1_BASE+0x07)
#define DMA_CNT_4 (IO_DMA2_BASE+0x02)
#define DMA_CNT_5 (IO_DMA2_BASE+0x06)
#define DMA_CNT_6 (IO_DMA2_BASE+0x0A)
#define DMA_CNT_7 (IO_DMA2_BASE+0x0E)
#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
#define DMA_AUTOINIT 0x10
#define DMA_8BIT 0
#define DMA_16BIT 1
#define DMA_BUSMASTER 2
extern spinlock_t dma_spin_lock;
static __inline__ unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
static __inline__ void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
/* enable/disable a specific DMA channel */
static __inline__ void enable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr, DMA1_MASK_REG);
else
dma_outb(dmanr & 3, DMA2_MASK_REG);
}
static __inline__ void disable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr | 4, DMA1_MASK_REG);
else
dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
}
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
* Use this once to initialize the FF to a known state.
* After that, keep track of it. :-)
* --- In order to do that, the DMA routines below should ---
* --- only be used while holding the DMA lock ! ---
*/
static __inline__ void clear_dma_ff(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(0, DMA1_CLEAR_FF_REG);
else
dma_outb(0, DMA2_CLEAR_FF_REG);
}
/* set mode (above) for a specific DMA channel */
static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
{
if (dmanr<=3)
dma_outb(mode | dmanr, DMA1_MODE_REG);
else
dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
}
/* Set transfer address & page bits for specific DMA channel.
* Assumes dma flipflop is clear.
*/
static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
{
if (dmanr <= 3) {
dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
} else {
dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
}
}
/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
* a specific DMA channel.
* You must ensure the parameters are valid.
* NOTE: from a manual: "the number of transfers is one more
* than the initial word count"! This is taken into account.
* Assumes dma flip-flop is clear.
* NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
*/
static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
{
count--;
if (dmanr <= 3) {
dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
} else {
dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
}
}
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
* still in progress will return unpredictable results.
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*
* Assumes DMA flip-flop is clear.
*/
static __inline__ int get_dma_residue(unsigned int dmanr)
{
unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
: ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
/* using short to get 16-bit wrap around */
unsigned short count;
count = 1 + dma_inb(io_port);
count += dma_inb(io_port) << 8;
return (dmanr<=3)? count : (count<<1);
}
/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
/* These are in arch/m68k/apollo/dma.c: */
extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
extern void dma_unmap_page(unsigned short dma_addr);
#endif /* _ASM_APOLLO_DMA_H */
...@@ -98,7 +98,7 @@ extern u_long timer_physaddr; ...@@ -98,7 +98,7 @@ extern u_long timer_physaddr;
#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
#define pica (IO_BASE + pica_physaddr) #define pica (IO_BASE + pica_physaddr)
#define picb (IO_BASE + picb_physaddr) #define picb (IO_BASE + picb_physaddr)
#define timer (IO_BASE + timer_physaddr) #define apollo_timer (IO_BASE + timer_physaddr)
#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) #define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
......
#include <asm-generic/bitsperlong.h>
#ifndef __M68K_CPUTIME_H
#define __M68K_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __M68K_CPUTIME_H */
...@@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops) ...@@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops)
extern void __bad_udelay(void); extern void __bad_udelay(void);
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) #ifdef CONFIG_CPU_HAS_NO_MULDIV64
/* /*
* The simpler m68k and ColdFire processors do not have a 32*32->64 * The simpler m68k and ColdFire processors do not have a 32*32->64
* multiply instruction. So we need to handle them a little differently. * multiply instruction. So we need to handle them a little differently.
......
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>
#ifndef _ASM_EMERGENCY_RESTART_H
#define _ASM_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* _ASM_EMERGENCY_RESTART_H */
#ifndef _M68K_ERRNO_H
#define _M68K_ERRNO_H
#include <asm-generic/errno.h>
#endif /* _M68K_ERRNO_H */
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#include <asm-generic/futex.h>
#endif
#include <asm-generic/ioctl.h>
#include <asm-generic/ipcbuf.h>
#include <asm-generic/irq_regs.h>
#include <asm-generic/kdebug.h>
#ifndef __ASM_M68K_KMAP_TYPES_H
#define __ASM_M68K_KMAP_TYPES_H
#include <asm-generic/kmap_types.h>
#endif /* __ASM_M68K_KMAP_TYPES_H */
#include <asm-generic/kvm_para.h>
#ifndef _ASM_M68K_LOCAL_H
#define _ASM_M68K_LOCAL_H
#include <asm-generic/local.h>
#endif /* _ASM_M68K_LOCAL_H */
#include <asm-generic/local64.h>
#ifndef _ASM_MAC_MOUSE_H
#define _ASM_MAC_MOUSE_H
/*
* linux/include/asm-m68k/mac_mouse.h
* header file for Macintosh ADB mouse driver
* 27-10-97 Michael Schmitz
* copied from:
* header file for Atari Mouse driver
* by Robert de Vries (robert@and.nl) on 19Jul93
*/
struct mouse_status {
char buttons;
short dx;
short dy;
int ready;
int active;
wait_queue_head_t wait;
struct fasync_struct *fasyncptr;
};
#endif
/****************************************************************************/
/*
* mcfmbus.h -- Coldfire MBUS support defines.
*
* (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de)
*/
/****************************************************************************/
#ifndef mcfmbus_h
#define mcfmbus_h
#define MCFMBUS_BASE 0x280
#define MCFMBUS_IRQ_VECTOR 0x19
#define MCFMBUS_IRQ 0x1
#define MCFMBUS_CLK 0x3f
#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/
#define MCFMBUS_ADDRESS 0x01
/*
* Define the 5307 MBUS register set addresses
*/
#define MCFMBUS_MADR 0x00
#define MCFMBUS_MFDR 0x04
#define MCFMBUS_MBCR 0x08
#define MCFMBUS_MBSR 0x0C
#define MCFMBUS_MBDR 0x10
#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/
#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/
/*
* Define bit flags in Control Register
*/
#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */
#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */
#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */
#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */
#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */
#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */
/*
* Define bit flags in Status Register
*/
#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */
#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */
#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */
#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */
#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */
#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */
#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */
/*
* Define bit flags in DATA I/O Register
*/
#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */
#define MBUSIOCSCLOCK 1
#define MBUSIOCGCLOCK 2
#define MBUSIOCSADDR 3
#define MBUSIOCGADDR 4
#define MBUSIOCSSLADDR 5
#define MBUSIOCGSLADDR 6
#define MBUSIOCSSUBADDR 7
#define MBUSIOCGSUBADDR 8
#endif
#include <asm-generic/mman.h>
/*
* Pull in the generic implementation for the mutex fastpath.
*
* TODO: implement optimized primitives instead, or leave the generic
* implementation in place, or pick the atomic_xchg() based generic
* implementation. (see asm-generic/mutex-xchg.h for details)
*/
#include <asm-generic/mutex-dec.h>
#ifndef __ASM_M68K_PERCPU_H
#define __ASM_M68K_PERCPU_H
#include <asm-generic/percpu.h>
#endif /* __ASM_M68K_PERCPU_H */
#ifndef _M68K_RESOURCE_H
#define _M68K_RESOURCE_H
#include <asm-generic/resource.h>
#endif /* _M68K_RESOURCE_H */
/*
* some sbus structures and macros to make usage of sbus drivers possible
*/
#ifndef __M68K_SBUS_H
#define __M68K_SBUS_H
struct sbus_dev {
struct {
unsigned int which_io;
unsigned int phys_addr;
} reg_addrs[1];
};
/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
/* No SBUS on the Sun3, kludge -- sam */
static inline void _sbus_writeb(unsigned char val, unsigned long addr)
{
*(volatile unsigned char *)addr = val;
}
static inline unsigned char _sbus_readb(unsigned long addr)
{
return *(volatile unsigned char *)addr;
}
static inline void _sbus_writel(unsigned long val, unsigned long addr)
{
*(volatile unsigned long *)addr = val;
}
extern inline unsigned long _sbus_readl(unsigned long addr)
{
return *(volatile unsigned long *)addr;
}
#define sbus_readb(a) _sbus_readb((unsigned long)a)
#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
#define sbus_readl(a) _sbus_readl((unsigned long)a)
#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
#endif
#ifndef _M68K_SCATTERLIST_H
#define _M68K_SCATTERLIST_H
#include <asm-generic/scatterlist.h>
#endif /* !(_M68K_SCATTERLIST_H) */
#ifndef _ASM_M68K_SECTIONS_H
#define _ASM_M68K_SECTIONS_H
#include <asm-generic/sections.h>
extern char _sbss[], _ebss[];
#endif /* _ASM_M68K_SECTIONS_H */
#ifndef _M68K_SHM_H
#define _M68K_SHM_H
/* format of page table entries that correspond to shared memory pages
currently out in swap space (see also mm/swap.c):
bits 0-1 (PAGE_PRESENT) is = 0
bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
bits 31..9 are used like this:
bits 15..9 (SHM_ID) the id of the shared memory segment
bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
(actually only bits 25..16 get used since SHMMAX is so low)
bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
*/
/* on the m68k both bits 0 and 1 must be zero */
/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
others are reduced by 2. --m */
#ifndef CONFIG_SUN3
#define SHM_ID_SHIFT 9
#else
#define SHM_ID_SHIFT 7
#endif
#define _SHM_ID_BITS 7
#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
#define _SHM_IDX_BITS 15
#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
#endif /* _M68K_SHM_H */
#ifndef _M68K_SIGINFO_H
#define _M68K_SIGINFO_H
#include <asm-generic/siginfo.h>
#endif
#ifndef _M68K_STATFS_H
#define _M68K_STATFS_H
#include <asm-generic/statfs.h>
#endif /* _M68K_STATFS_H */
#ifndef _ASM_M68K_TOPOLOGY_H
#define _ASM_M68K_TOPOLOGY_H
#include <asm-generic/topology.h>
#endif /* _ASM_M68K_TOPOLOGY_H */
#ifndef _M68K_TYPES_H
#define _M68K_TYPES_H
/*
* This file is never included by application software unless
* explicitly requested (e.g., via linux/types.h) in which case the
* application is Linux specific so (user-) name space pollution is
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
#include <asm-generic/int-ll64.h>
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
#define BITS_PER_LONG 32
#endif /* __KERNEL__ */
#endif /* _M68K_TYPES_H */
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
#define _ASM_M68K_UNALIGNED_H #define _ASM_M68K_UNALIGNED_H
#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000) #ifdef CONFIG_CPU_HAS_NO_UNALIGNED
#include <linux/unaligned/be_struct.h> #include <linux/unaligned/be_struct.h>
#include <linux/unaligned/le_byteshift.h> #include <linux/unaligned/le_byteshift.h>
#include <linux/unaligned/generic.h> #include <linux/unaligned/generic.h>
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
#else #else
/* /*
* The m68k can do unaligned accesses itself. * The m68k can do unaligned accesses itself.
*/ */
#include <linux/unaligned/access_ok.h> #include <linux/unaligned/access_ok.h>
#include <linux/unaligned/generic.h> #include <linux/unaligned/generic.h>
......
#include <asm-generic/xor.h>
...@@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p) ...@@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
#endif #endif
pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, _stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
(int) &_sdata, (int) &_edata, pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
(int) &_sbss, (int) &_ebss); __bss_stop, memory_start, memory_start, memory_end);
pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
(int) &_ebss, (int) memory_start,
(int) memory_start, (int) memory_end);
/* Keep a copy of command line */ /* Keep a copy of command line */
*cmdline_p = &command_line[0]; *cmdline_p = &command_line[0];
......
...@@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, ...@@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
goto bad_access; goto bad_access;
} }
mem_value = *mem; /*
* No need to check for EFAULT; we know that the page is
* present and writable.
*/
__get_user(mem_value, mem);
if (mem_value == oldval) if (mem_value == oldval)
*mem = newval; __put_user(newval, mem);
pte_unmap_unlock(pte, ptl); pte_unmap_unlock(pte, ptl);
up_read(&mm->mmap_sem); up_read(&mm->mmap_sem);
......
...@@ -78,9 +78,7 @@ SECTIONS { ...@@ -78,9 +78,7 @@ SECTIONS {
__init_end = .; __init_end = .;
} }
_sbss = .;
BSS_SECTION(0, 0, 0) BSS_SECTION(0, 0, 0)
_ebss = .;
_end = .; _end = .;
......
...@@ -31,9 +31,7 @@ SECTIONS ...@@ -31,9 +31,7 @@ SECTIONS
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
_sbss = .;
BSS_SECTION(0, 0, 0) BSS_SECTION(0, 0, 0)
_ebss = .;
_edata = .; /* End of data section */ _edata = .; /* End of data section */
......
...@@ -44,9 +44,7 @@ __init_begin = .; ...@@ -44,9 +44,7 @@ __init_begin = .;
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
_sbss = .;
BSS_SECTION(0, 0, 0) BSS_SECTION(0, 0, 0)
_ebss = .;
_end = . ; _end = . ;
......
...@@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to ...@@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330, the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */ Boston, MA 02111-1307, USA. */
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) #ifdef CONFIG_CPU_HAS_NO_MULDIV64
#define SI_TYPE_SIZE 32 #define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4) #define __BITS4 (SI_TYPE_SIZE / 4)
......
...@@ -104,7 +104,7 @@ void __init print_memmap(void) ...@@ -104,7 +104,7 @@ void __init print_memmap(void)
MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_stext, _etext), MLK_ROUNDUP(_stext, _etext),
MLK_ROUNDUP(_sdata, _edata), MLK_ROUNDUP(_sdata, _edata),
MLK_ROUNDUP(_sbss, _ebss)); MLK_ROUNDUP(__bss_start, __bss_stop));
} }
void __init mem_init(void) void __init mem_init(void)
......
...@@ -91,7 +91,7 @@ void __init mem_init(void) ...@@ -91,7 +91,7 @@ void __init mem_init(void)
totalram_pages = free_all_bootmem(); totalram_pages = free_all_bootmem();
codek = (_etext - _stext) >> 10; codek = (_etext - _stext) >> 10;
datak = (_ebss - _sdata) >> 10; datak = (__bss_stop - _sdata) >> 10;
initk = (__init_begin - __init_end) >> 10; initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT; tmp = nr_free_pages() << PAGE_SHIFT;
......
...@@ -60,8 +60,8 @@ _start: ...@@ -60,8 +60,8 @@ _start:
* Move ROM filesystem above bss :-) * Move ROM filesystem above bss :-)
*/ */
moveal #_sbss, %a0 /* romfs at the start of bss */ moveal #__bss_start, %a0 /* romfs at the start of bss */
moveal #_ebss, %a1 /* Set up destination */ moveal #__bss_stop, %a1 /* Set up destination */
movel %a0, %a2 /* Copy of bss start */ movel %a0, %a2 /* Copy of bss start */
movel 8(%a0), %d1 /* Get size of ROMFS */ movel 8(%a0), %d1 /* Get size of ROMFS */
...@@ -84,8 +84,8 @@ _start: ...@@ -84,8 +84,8 @@ _start:
* Initialize BSS segment to 0 * Initialize BSS segment to 0
*/ */
lea _sbss, %a0 lea __bss_start, %a0
lea _ebss, %a1 lea __bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */ /* Copy 0 to %a0 until %a0 == %a1 */
2: cmpal %a0, %a1 2: cmpal %a0, %a1
......
...@@ -110,7 +110,7 @@ L0: ...@@ -110,7 +110,7 @@ L0:
movel #CONFIG_VECTORBASE, %d7 movel #CONFIG_VECTORBASE, %d7
addl #16, %d7 addl #16, %d7
moveal %d7, %a0 moveal %d7, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
lea %a1@(512), %a2 lea %a1@(512), %a2
DBG_PUTC('C') DBG_PUTC('C')
...@@ -138,8 +138,8 @@ LD1: ...@@ -138,8 +138,8 @@ LD1:
DBG_PUTC('E') DBG_PUTC('E')
moveal #_sbss, %a0 moveal #__bss_start, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */ /* Copy 0 to %a0 until %a0 == %a1 */
L1: L1:
...@@ -150,7 +150,7 @@ L1: ...@@ -150,7 +150,7 @@ L1:
DBG_PUTC('F') DBG_PUTC('F')
/* Copy command line from end of bss to command line */ /* Copy command line from end of bss to command line */
moveal #_ebss, %a0 moveal #__bss_stop, %a0
moveal #command_line, %a1 moveal #command_line, %a1
lea %a1@(512), %a2 lea %a1@(512), %a2
...@@ -165,7 +165,7 @@ L3: ...@@ -165,7 +165,7 @@ L3:
movel #_sdata, %d0 movel #_sdata, %d0
movel %d0, _rambase movel %d0, _rambase
movel #_ebss, %d0 movel #__bss_stop, %d0
movel %d0, _ramstart movel %d0, _ramstart
movel %a4, %d0 movel %a4, %d0
......
...@@ -76,8 +76,8 @@ pclp3: ...@@ -76,8 +76,8 @@ pclp3:
beq pclp3 beq pclp3
#endif /* DEBUG */ #endif /* DEBUG */
moveal #0x007ffff0, %ssp moveal #0x007ffff0, %ssp
moveal #_sbss, %a0 moveal #__bss_start, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 >= %a1 */ /* Copy 0 to %a0 until %a0 >= %a1 */
L1: L1:
......
...@@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr ...@@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr
cmpal %a1, %a2 cmpal %a1, %a2
bhi 1b bhi 1b
moveal #_sbss, %a0 moveal #__bss_start, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */ /* Copy 0 to %a0 until %a0 == %a1 */
1: 1:
...@@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr ...@@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr
movel #_sdata, %d0 movel #_sdata, %d0
movel %d0, _rambase movel %d0, _rambase
movel #_ebss, %d0 movel #__bss_stop, %d0
movel %d0, _ramstart movel %d0, _ramstart
movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0 movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0
movel %d0, _ramend movel %d0, _ramend
......
...@@ -219,8 +219,8 @@ LD1: ...@@ -219,8 +219,8 @@ LD1:
cmp.l #_edata, %a1 cmp.l #_edata, %a1
blt LD1 blt LD1
moveal #_sbss, %a0 moveal #__bss_start, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */ /* Copy 0 to %a0 until %a0 == %a1 */
L1: L1:
...@@ -234,7 +234,7 @@ load_quicc: ...@@ -234,7 +234,7 @@ load_quicc:
store_ram_size: store_ram_size:
/* Set ram size information */ /* Set ram size information */
move.l #_sdata, _rambase move.l #_sdata, _rambase
move.l #_ebss, _ramstart move.l #__bss_stop, _ramstart
move.l #RAMEND, %d0 move.l #RAMEND, %d0
sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
move.l %d0, _ramend /* Different from RAMEND.*/ move.l %d0, _ramend /* Different from RAMEND.*/
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
*/ */
.global _stext .global _stext
.global _sbss .global __bss_start
.global _start .global _start
.global _rambase .global _rambase
...@@ -229,8 +229,8 @@ LD1: ...@@ -229,8 +229,8 @@ LD1:
cmp.l #_edata, %a1 cmp.l #_edata, %a1
blt LD1 blt LD1
moveal #_sbss, %a0 moveal #__bss_start, %a0
moveal #_ebss, %a1 moveal #__bss_stop, %a1
/* Copy 0 to %a0 until %a0 == %a1 */ /* Copy 0 to %a0 until %a0 == %a1 */
L1: L1:
...@@ -244,7 +244,7 @@ load_quicc: ...@@ -244,7 +244,7 @@ load_quicc:
store_ram_size: store_ram_size:
/* Set ram size information */ /* Set ram size information */
move.l #_sdata, _rambase move.l #_sdata, _rambase
move.l #_ebss, _ramstart move.l #__bss_stop, _ramstart
move.l #RAMEND, %d0 move.l #RAMEND, %d0
sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
move.l %d0, _ramend /* Different from RAMEND.*/ move.l %d0, _ramend /* Different from RAMEND.*/
......
...@@ -230,8 +230,8 @@ _vstart: ...@@ -230,8 +230,8 @@ _vstart:
/* /*
* Move ROM filesystem above bss :-) * Move ROM filesystem above bss :-)
*/ */
lea _sbss,%a0 /* get start of bss */ lea __bss_start,%a0 /* get start of bss */
lea _ebss,%a1 /* set up destination */ lea __bss_stop,%a1 /* set up destination */
movel %a0,%a2 /* copy of bss start */ movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */ movel 8(%a0),%d0 /* get size of ROMFS */
...@@ -249,7 +249,7 @@ _copy_romfs: ...@@ -249,7 +249,7 @@ _copy_romfs:
bne _copy_romfs bne _copy_romfs
#else /* CONFIG_ROMFS_FS */ #else /* CONFIG_ROMFS_FS */
lea _ebss,%a1 lea __bss_stop,%a1
movel %a1,_ramstart movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */ #endif /* CONFIG_ROMFS_FS */
...@@ -257,8 +257,8 @@ _copy_romfs: ...@@ -257,8 +257,8 @@ _copy_romfs:
/* /*
* Zero out the bss region. * Zero out the bss region.
*/ */
lea _sbss,%a0 /* get start of bss */ lea __bss_start,%a0 /* get start of bss */
lea _ebss,%a1 /* get end of bss */ lea __bss_stop,%a1 /* get end of bss */
clrl %d0 /* set value */ clrl %d0 /* set value */
_clear_bss: _clear_bss:
movel %d0,(%a0)+ /* clear each word */ movel %d0,(%a0)+ /* clear each word */
......
...@@ -22,57 +22,13 @@ int prom_root_node; ...@@ -22,57 +22,13 @@ int prom_root_node;
struct linux_nodeops *prom_nodeops; struct linux_nodeops *prom_nodeops;
/* You must call prom_init() before you attempt to use any of the /* You must call prom_init() before you attempt to use any of the
* routines in the prom library. It returns 0 on success, 1 on * routines in the prom library.
* failure. It gets passed the pointer to the PROM vector. * It gets passed the pointer to the PROM vector.
*/ */
extern void prom_meminit(void);
extern void prom_ranges_init(void);
void __init prom_init(struct linux_romvec *rp) void __init prom_init(struct linux_romvec *rp)
{ {
romvec = rp; romvec = rp;
#ifndef CONFIG_SUN3
switch(romvec->pv_romvers) {
case 0:
prom_vers = PROM_V0;
break;
case 2:
prom_vers = PROM_V2;
break;
case 3:
prom_vers = PROM_V3;
break;
case 4:
prom_vers = PROM_P1275;
prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
prom_halt();
break;
default:
prom_printf("PROMLIB: Bad PROM version %d\n",
romvec->pv_romvers);
prom_halt();
break;
};
prom_rev = romvec->pv_plugin_revision;
prom_prev = romvec->pv_printrev;
prom_nodeops = romvec->pv_nodeops;
prom_root_node = prom_getsibling(0);
if((prom_root_node == 0) || (prom_root_node == -1))
prom_halt();
if((((unsigned long) prom_nodeops) == 0) ||
(((unsigned long) prom_nodeops) == -1))
prom_halt();
prom_meminit();
prom_ranges_init();
#endif
// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
// romvec->pv_romvers, prom_rev);
/* Initialization successful. */ /* Initialization successful. */
return; return;
......
...@@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[]; ...@@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[];
extern unsigned long __ivt_start[], __ivt_end[]; extern unsigned long __ivt_start[], __ivt_end[];
extern char _etext[], _stext[]; extern char _etext[], _stext[];
# ifdef CONFIG_MTD_UCLINUX
extern char *_ebss;
# endif
extern u32 _fdt_start[], _fdt_end[]; extern u32 _fdt_start[], _fdt_end[];
# endif /* !__ASSEMBLY__ */ # endif /* !__ASSEMBLY__ */
......
...@@ -21,9 +21,6 @@ ...@@ -21,9 +21,6 @@
#include <linux/ftrace.h> #include <linux/ftrace.h>
#include <linux/uaccess.h> #include <linux/uaccess.h>
extern char *_ebss;
EXPORT_SYMBOL_GPL(_ebss);
#ifdef CONFIG_FUNCTION_TRACER #ifdef CONFIG_FUNCTION_TRACER
extern void _mcount(void); extern void _mcount(void);
EXPORT_SYMBOL(_mcount); EXPORT_SYMBOL(_mcount);
......
...@@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, ...@@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
/* Move ROMFS out of BSS before clearing it */ /* Move ROMFS out of BSS before clearing it */
if (romfs_size > 0) { if (romfs_size > 0) {
memmove(&_ebss, (int *)romfs_base, romfs_size); memmove(&__bss_stop, (int *)romfs_base, romfs_size);
klimit += romfs_size; klimit += romfs_size;
} }
#endif #endif
...@@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, ...@@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
BUG_ON(romfs_size < 0); /* What else can we do? */ BUG_ON(romfs_size < 0); /* What else can we do? */
printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
romfs_size, romfs_base, (unsigned)&_ebss); romfs_size, romfs_base, (unsigned)&__bss_stop);
printk("New klimit: 0x%08x\n", (unsigned)klimit); printk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif #endif
......
...@@ -131,7 +131,6 @@ SECTIONS { ...@@ -131,7 +131,6 @@ SECTIONS {
*(COMMON) *(COMMON)
. = ALIGN (4) ; . = ALIGN (4) ;
__bss_stop = . ; __bss_stop = . ;
_ebss = . ;
} }
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
_end = .; _end = .;
......
...@@ -6,7 +6,6 @@ ...@@ -6,7 +6,6 @@
extern long __nosave_begin, __nosave_end; extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end; extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end; extern char __uncached_start, __uncached_end;
extern char _ebss[];
extern char __start_eh_frame[], __stop_eh_frame[]; extern char __start_eh_frame[], __stop_eh_frame[];
#endif /* __ASM_SH_SECTIONS_H */ #endif /* __ASM_SH_SECTIONS_H */
......
...@@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p)
data_resource.start = virt_to_phys(_etext); data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1; data_resource.end = virt_to_phys(_edata)-1;
bss_resource.start = virt_to_phys(__bss_start); bss_resource.start = virt_to_phys(__bss_start);
bss_resource.end = virt_to_phys(_ebss)-1; bss_resource.end = virt_to_phys(__bss_stop)-1;
#ifdef CONFIG_CMDLINE_OVERWRITE #ifdef CONFIG_CMDLINE_OVERWRITE
strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
......
...@@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); ...@@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_ebss);
EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(empty_zero_page);
#define DECLARE_EXPORT(name) \ #define DECLARE_EXPORT(name) \
......
...@@ -78,7 +78,6 @@ SECTIONS ...@@ -78,7 +78,6 @@ SECTIONS
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
BSS_SECTION(0, PAGE_SIZE, 4) BSS_SECTION(0, PAGE_SIZE, 4)
_ebss = .; /* uClinux MTD sucks */
_end = . ; _end = . ;
STABS_DEBUG STABS_DEBUG
......
...@@ -39,7 +39,7 @@ ...@@ -39,7 +39,7 @@
* *
* Make sure the stack pointer contains a valid address. Valid * Make sure the stack pointer contains a valid address. Valid
* addresses for kernel stacks are anywhere after the bss * addresses for kernel stacks are anywhere after the bss
* (after _ebss) and anywhere in init_thread_union (init_stack). * (after __bss_stop) and anywhere in init_thread_union (init_stack).
*/ */
#define STACK_CHECK() \ #define STACK_CHECK() \
mov #(THREAD_SIZE >> 10), r0; \ mov #(THREAD_SIZE >> 10), r0; \
...@@ -60,7 +60,7 @@ ...@@ -60,7 +60,7 @@
cmp/hi r2, r1; \ cmp/hi r2, r1; \
bf stack_panic; \ bf stack_panic; \
\ \
/* If sp > _ebss then we're OK. */ \ /* If sp > __bss_stop then we're OK. */ \
mov.l .L_ebss, r1; \ mov.l .L_ebss, r1; \
cmp/hi r1, r15; \ cmp/hi r1, r15; \
bt 1f; \ bt 1f; \
...@@ -70,7 +70,7 @@ ...@@ -70,7 +70,7 @@
cmp/hs r1, r15; \ cmp/hs r1, r15; \
bf stack_panic; \ bf stack_panic; \
\ \
/* If sp > init_stack && sp < _ebss, not OK. */ \ /* If sp > init_stack && sp < __bss_stop, not OK. */ \
add r0, r1; \ add r0, r1; \
cmp/hs r1, r15; \ cmp/hs r1, r15; \
bt stack_panic; \ bt stack_panic; \
...@@ -292,8 +292,6 @@ stack_panic: ...@@ -292,8 +292,6 @@ stack_panic:
nop nop
.align 2 .align 2
.L_ebss:
.long _ebss
.L_init_thread_union: .L_init_thread_union:
.long init_thread_union .long init_thread_union
.Lpanic: .Lpanic:
......
...@@ -19,14 +19,13 @@ ...@@ -19,14 +19,13 @@
#include <linux/mtd/map.h> #include <linux/mtd/map.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/sections.h>
/****************************************************************************/ /****************************************************************************/
extern char _ebss;
struct map_info uclinux_ram_map = { struct map_info uclinux_ram_map = {
.name = "RAM", .name = "RAM",
.phys = (unsigned long)&_ebss, .phys = (unsigned long)__bss_stop,
.size = 0, .size = 0,
}; };
......
...@@ -37,7 +37,6 @@ struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO]; ...@@ -37,7 +37,6 @@ struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO];
*/ */
struct zorro_bus { struct zorro_bus {
struct list_head devices; /* list of devices on this bus */
struct device dev; struct device dev;
}; };
...@@ -136,7 +135,6 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) ...@@ -136,7 +135,6 @@ static int __init amiga_zorro_probe(struct platform_device *pdev)
if (!bus) if (!bus)
return -ENOMEM; return -ENOMEM;
INIT_LIST_HEAD(&bus->devices);
bus->dev.parent = &pdev->dev; bus->dev.parent = &pdev->dev;
dev_set_name(&bus->dev, "zorro"); dev_set_name(&bus->dev, "zorro");
error = device_register(&bus->dev); error = device_register(&bus->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment