Commit 5b85e8f2 authored by Bhupesh Sharma's avatar Bhupesh Sharma Committed by Bjorn Andersson

arm64: dts: qcom: sa8155p-adp: Add base dts file

Add base DTS file for SA8155p Automotive Development Platform.
It enables boot to console, adds tlmm reserved range and ufs flash.
It also includes pmic file.

SA8155p-adp board is based on sa8155p Qualcomm Snapdragon SoC.
SA8155p platform is similar to the SM8150, so use this as base
for now.

Cc: Vinod Koul <vkoul@kernel.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: default avatarBhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617054548.353293-6-bhupesh.sharma@linaro.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent b557471b
...@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb ...@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
......
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
#include "sm8150.dtsi"
#include "pmm8155au_1.dtsi"
#include "pmm8155au_2.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SA8155P ADP";
compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
aliases {
serial0 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
vreg_3p3: vreg_3p3_regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/*
* S4A is always on and not controllable through RPMh.
* So model it as a fixed regulator.
*/
vreg_s4a_1p8: smps4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-set-load;
vin-supply = <&vreg_3p3>;
};
};
&apps_rsc {
pmm8155au-1-rpmh-regulators {
compatible = "qcom,pmm8155au-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vreg_3p3>;
vdd-s2-supply = <&vreg_3p3>;
vdd-s3-supply = <&vreg_3p3>;
vdd-s4-supply = <&vreg_3p3>;
vdd-s5-supply = <&vreg_3p3>;
vdd-s6-supply = <&vreg_3p3>;
vdd-s7-supply = <&vreg_3p3>;
vdd-s8-supply = <&vreg_3p3>;
vdd-s9-supply = <&vreg_3p3>;
vdd-s10-supply = <&vreg_3p3>;
vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
vdd-l2-l10-supply = <&vreg_3p3>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
vdd-l6-l9-supply = <&vreg_s6a_0p92>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
vdd-l13-l16-l17-supply = <&vreg_3p3>;
vreg_s5a_2p04: smps5 {
regulator-name = "vreg_s5a_2p04";
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2000000>;
};
vreg_s6a_0p92: smps6 {
regulator-name = "vreg_s6a_0p92";
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <1128000>;
};
vreg_l1a_0p752: ldo1 {
regulator-name = "vreg_l1a_0p752";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <752000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_usb_hs_3p1:
vreg_l2a_3p072: ldo2 {
regulator-name = "vreg_l2a_3p072";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p8: ldo3 {
regulator-name = "vreg_l3a_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_usb_hs_core:
vdda_usb_ss_dp_core_1:
vreg_l5a_0p88: ldo5 {
regulator-name = "vreg_l5a_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7a_1p8: ldo7 {
regulator-name = "vreg_l7a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_2p96: ldo10 {
regulator-name = "vreg_l10a_2p96";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l11a_0p8: ldo11 {
regulator-name = "vreg_l11a_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_usb_hs_1p8:
vreg_l12a_1p8: ldo12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_2p7: ldo13 {
regulator-name = "vreg_l13a_2p7";
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p7: ldo15 {
regulator-name = "vreg_l15a_1p7";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_2p96: ldo17 {
regulator-name = "vreg_l17a_2p96";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
pmm8155au-2-rpmh-regulators {
compatible = "qcom,pmm8155au-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vreg_3p3>;
vdd-s2-supply = <&vreg_3p3>;
vdd-s3-supply = <&vreg_3p3>;
vdd-s4-supply = <&vreg_3p3>;
vdd-s5-supply = <&vreg_3p3>;
vdd-s6-supply = <&vreg_3p3>;
vdd-s7-supply = <&vreg_3p3>;
vdd-s8-supply = <&vreg_3p3>;
vdd-s9-supply = <&vreg_3p3>;
vdd-s10-supply = <&vreg_3p3>;
vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
vdd-l2-l10-supply = <&vreg_3p3>;
vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
vdd-l6-l9-supply = <&vreg_s6c_1p128>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
vdd-l13-l16-l17-supply = <&vreg_3p3>;
vreg_s4c_1p352: smps4 {
regulator-name = "vreg_s4c_1p352";
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
};
vreg_s5c_2p04: smps5 {
regulator-name = "vreg_s5c_2p04";
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2000000>;
};
vreg_s6c_1p128: smps6 {
regulator-name = "vreg_s6c_1p128";
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
};
vreg_l1c_1p304: ldo1 {
regulator-name = "vreg_l1c_1p304";
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p808: ldo2 {
regulator-name = "vreg_l2c_1p808";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p2: ldo5 {
regulator-name = "vreg_l5c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7c_1p8: ldo7 {
regulator-name = "vreg_l7c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p2: ldo8 {
regulator-name = "vreg_l8c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l10c_3p3: ldo10 {
regulator-name = "vreg_l10c_3p3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_0p8: ldo11 {
regulator-name = "vreg_l11c_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c_1p808: ldo12 {
regulator-name = "vreg_l12c_1p808";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c_2p96: ldo13 {
regulator-name = "vreg_l13c_2p96";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15c_1p9: ldo15 {
regulator-name = "vreg_l15c_1p9";
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16c_3p008: ldo16 {
regulator-name = "vreg_l16c_3p008";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18c_0p88: ldo18 {
regulator-name = "vreg_l18c_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&qupv3_id_1 {
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <0 4>;
};
&uart2 {
status = "okay";
};
&ufs_mem_hc {
status = "okay";
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l10a_2p96>;
vcc-max-microamp = <750000>;
vccq-supply = <&vreg_l5c_1p2>;
vccq-max-microamp = <700000>;
vccq2-supply = <&vreg_s4a_1p8>;
vccq2-max-microamp = <750000>;
};
&ufs_mem_phy {
status = "okay";
vdda-phy-supply = <&vreg_l8c_1p2>;
vdda-max-microamp = <87100>;
vdda-pll-supply = <&vreg_l5a_0p88>;
vdda-pll-max-microamp = <18300>;
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vdd_usb_hs_core>;
vdda33-supply = <&vdda_usb_hs_3p1>;
vdda18-supply = <&vdda_usb_hs_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l8c_1p2>;
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment