cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry

commit 721f3223 upstream.

Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.

Add card name comments to the subsystem ids.

This fixes a regression introduced in 3.17 by
36efec48 ([media] cx23885: Add si2165 support for HVR-5500)
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/media/pci/cx23885/cx23885-cards.c

@@ -614,7 +614,7 @@ struct cx23885_board cx23885_boards[] = {
 		.portb		= CX23885_MPEG_DVB,
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
-		.name		= "Hauppauge WinTV-HVR4400",
+		.name		= "Hauppauge WinTV-HVR4400/HVR5500",
 		.porta		= CX23885_ANALOG_VIDEO,
 		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
@@ -622,6 +622,10 @@ struct cx23885_board cx23885_boards[] = {
 		.tuner_addr	= 0x60, /* 0xc0 >> 1 */
 		.tuner_bus	= 1,
 	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST] = {
+		.name		= "Hauppauge WinTV Starburst",
+		.portb		= CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_AVERMEDIA_HC81R] = {
 		.name		= "AVerTV Hybrid Express Slim HC81R",
 		.tuner_type	= TUNER_XC2028,
@@ -910,19 +914,19 @@ struct cx23885_subid cx23885_subids[] = {
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc108,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-4400 (Model 121xxx, Hybrid DVB-T/S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc138,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc12a,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST, /* Hauppauge WinTV Starburst (Model 121x00, DVB-S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc1f8,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
 	}, {
 		.subvendor = 0x1461,
 		.subdevice = 0xd939,
@@ -1495,8 +1499,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 		/* GPIO-8 tda10071 demod reset */
-		/* GPIO-9 si2165 demod reset */
+		/* GPIO-9 si2165 demod reset (only HVR4400/HVR5500)*/
 
 		/* Put the parts into reset and back */
 		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
@@ -1760,6 +1765,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
@@ -1864,6 +1870,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_DVBSKY_T9580:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */

drivers/media/pci/cx23885/cx23885-dvb.c

@@ -1586,6 +1586,17 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10071_attach,
+						&hauppauge_tda10071_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(a8293_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_a8293_config);
+		}
+		break;
 	case CX23885_BOARD_DVBSKY_T9580:
 		i2c_bus = &dev->i2c_bus[0];
 		i2c_bus2 = &dev->i2c_bus[1];

drivers/media/pci/cx23885/cx23885.h

@@ -93,6 +93,7 @@
 #define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE     43
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
 #define CX23885_BOARD_DVBSKY_T9580             45
+#define CX23885_BOARD_HAUPPAUGE_STARBURST      52
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002