Commit 6463e54c authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
  number of reported problems.

  They include:

   - mips serial driver fixes

   - 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - other tiny driver fixes

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
  serial: 8250_mtk: fix uart corruption issue when rx power off
  tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
  serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
  serial: 8250: fix handle_irq locking
  serial: tegra: Only print FIFO error message when an error occurs
  MIPS: Malta: Do not byte-swap accesses to the CBUS UART
  serial: 8250: Mask out floating 16/32-bit bus bits
  serial: max310x: Unprepare and disable clock in error path
parents 6a655547 341abd69
......@@ -48,7 +48,8 @@ static struct plat_serial8250_port uart8250_data[] = {
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.uartclk = 3686400, /* Twice the usual clk! */
.iotype = UPIO_MEM32,
.iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
UPIO_MEM32BE : UPIO_MEM32,
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
......
......@@ -329,6 +329,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned int iir, lsr;
unsigned long flags;
unsigned int space, count;
iir = serial_port_in(port, UART_IIR);
......@@ -336,7 +337,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
if (iir & UART_IIR_NO_INT)
return 0;
spin_lock(&port->lock);
spin_lock_irqsave(&port->lock, flags);
lsr = serial_port_in(port, UART_LSR);
......@@ -370,7 +371,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
if (lsr & UART_LSR_THRE)
serial8250_tx_chars(up);
uart_unlock_and_check_sysrq(port);
uart_unlock_and_check_sysrq_irqrestore(port, flags);
return 1;
}
......
......@@ -30,10 +30,11 @@ struct fsl8250_data {
int fsl8250_handle_irq(struct uart_port *port)
{
unsigned char lsr, orig_lsr;
unsigned long flags;
unsigned int iir;
struct uart_8250_port *up = up_to_u8250p(port);
spin_lock(&up->port.lock);
spin_lock_irqsave(&up->port.lock, flags);
iir = port->serial_in(port, UART_IIR);
if (iir & UART_IIR_NO_INT) {
......@@ -82,7 +83,7 @@ int fsl8250_handle_irq(struct uart_port *port)
up->lsr_saved_flags = orig_lsr;
uart_unlock_and_check_sysrq(&up->port);
uart_unlock_and_check_sysrq_irqrestore(&up->port, flags);
return 1;
}
......
......@@ -93,10 +93,13 @@ static void mtk8250_dma_rx_complete(void *param)
struct dma_tx_state state;
int copied, total, cnt;
unsigned char *ptr;
unsigned long flags;
if (data->rx_status == DMA_RX_SHUTDOWN)
return;
spin_lock_irqsave(&up->port.lock, flags);
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
total = dma->rx_size - state.residue;
cnt = total;
......@@ -120,6 +123,8 @@ static void mtk8250_dma_rx_complete(void *param)
tty_flip_buffer_push(tty_port);
mtk8250_rx_dma(up);
spin_unlock_irqrestore(&up->port.lock, flags);
}
static void mtk8250_rx_dma(struct uart_8250_port *up)
......
......@@ -3836,6 +3836,12 @@ static const struct pci_device_id blacklist[] = {
{ PCI_VDEVICE(INTEL, 0x0f0c), },
{ PCI_VDEVICE(INTEL, 0x228a), },
{ PCI_VDEVICE(INTEL, 0x228c), },
{ PCI_VDEVICE(INTEL, 0x4b96), },
{ PCI_VDEVICE(INTEL, 0x4b97), },
{ PCI_VDEVICE(INTEL, 0x4b98), },
{ PCI_VDEVICE(INTEL, 0x4b99), },
{ PCI_VDEVICE(INTEL, 0x4b9a), },
{ PCI_VDEVICE(INTEL, 0x4b9b), },
{ PCI_VDEVICE(INTEL, 0x9ce3), },
{ PCI_VDEVICE(INTEL, 0x9ce4), },
......@@ -3996,6 +4002,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
if (pci_match_id(pci_use_msi, dev)) {
dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
pci_set_master(dev);
uart.port.flags &= ~UPF_SHARE_IRQ;
rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
} else {
dev_dbg(&dev->dev, "Using legacy interrupts\n");
......
......@@ -311,7 +311,11 @@ static const struct serial8250_config uart_config[] = {
/* Uart divisor latch read */
static int default_serial_dl_read(struct uart_8250_port *up)
{
return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
/* Assign these in pieces to truncate any bits above 7. */
unsigned char dll = serial_in(up, UART_DLL);
unsigned char dlm = serial_in(up, UART_DLM);
return dll | dlm << 8;
}
/* Uart divisor latch write */
......@@ -1297,9 +1301,11 @@ static void autoconfig(struct uart_8250_port *up)
serial_out(up, UART_LCR, 0);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
scratch = serial_in(up, UART_IIR) >> 6;
switch (scratch) {
/* Assign this as it is to truncate any bits above 7. */
scratch = serial_in(up, UART_IIR);
switch (scratch >> 6) {
case 0:
autoconfig_8250(up);
break;
......@@ -1893,11 +1899,12 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
unsigned char status;
struct uart_8250_port *up = up_to_u8250p(port);
bool skip_rx = false;
unsigned long flags;
if (iir & UART_IIR_NO_INT)
return 0;
spin_lock(&port->lock);
spin_lock_irqsave(&port->lock, flags);
status = serial_port_in(port, UART_LSR);
......@@ -1923,7 +1930,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
(up->ier & UART_IER_THRI))
serial8250_tx_chars(up);
uart_unlock_and_check_sysrq(port);
uart_unlock_and_check_sysrq_irqrestore(port, flags);
return 1;
}
......
......@@ -1415,7 +1415,7 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port)
static unsigned int lpuart32_get_mctrl(struct uart_port *port)
{
unsigned int mctrl = 0;
unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
u32 reg;
reg = lpuart32_read(port, UARTCTRL);
......
......@@ -1293,7 +1293,8 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
freq = uartclk;
if (freq == 0) {
dev_err(dev, "Cannot get clock rate\n");
return -EINVAL;
ret = -EINVAL;
goto out_clk;
}
if (xtal) {
......
......@@ -1045,9 +1045,11 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
if (tup->cdata->fifo_mode_enable_status) {
ret = tegra_uart_wait_fifo_mode_enabled(tup);
dev_err(tup->uport.dev, "FIFO mode not enabled\n");
if (ret < 0)
if (ret < 0) {
dev_err(tup->uport.dev,
"Failed to enable FIFO mode: %d\n", ret);
return ret;
}
} else {
/*
* For all tegra devices (up to t210), there is a hardware
......
......@@ -518,6 +518,25 @@ static inline void uart_unlock_and_check_sysrq(struct uart_port *port)
if (sysrq_ch)
handle_sysrq(sysrq_ch);
}
static inline void uart_unlock_and_check_sysrq_irqrestore(struct uart_port *port,
unsigned long flags)
{
int sysrq_ch;
if (!port->has_sysrq) {
spin_unlock_irqrestore(&port->lock, flags);
return;
}
sysrq_ch = port->sysrq_ch;
port->sysrq_ch = 0;
spin_unlock_irqrestore(&port->lock, flags);
if (sysrq_ch)
handle_sysrq(sysrq_ch);
}
#else /* CONFIG_MAGIC_SYSRQ_SERIAL */
static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
{
......@@ -531,6 +550,11 @@ static inline void uart_unlock_and_check_sysrq(struct uart_port *port)
{
spin_unlock(&port->lock);
}
static inline void uart_unlock_and_check_sysrq_irqrestore(struct uart_port *port,
unsigned long flags)
{
spin_unlock_irqrestore(&port->lock, flags);
}
#endif /* CONFIG_MAGIC_SYSRQ_SERIAL */
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment