Commit 67315b2b authored by Alexandru Ardelean's avatar Alexandru Ardelean Committed by Greg Kroah-Hartman

staging: iio: adc: ad7192: fix external frequency setting

commit e31b617d upstream.

The external clock frequency was set only when selecting
the internal clock, which is fixed at 4.9152 Mhz.

This is incorrect, since it should be set when any of
the external clock or crystal settings is selected.

Added range validation for the external (crystal/clock)
frequency setting.
Valid values are between 2.4576 and 5.12 Mhz.
Signed-off-by: default avatarAlexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 83c76f2c
......@@ -124,6 +124,8 @@
#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */
#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */
#define AD7192_EXT_FREQ_MHZ_MIN 2457600
#define AD7192_EXT_FREQ_MHZ_MAX 5120000
#define AD7192_INT_FREQ_MHZ 4915200
/* NOTE:
......@@ -199,6 +201,12 @@ static int ad7192_calibrate_all(struct ad7192_state *st)
ARRAY_SIZE(ad7192_calib_arr));
}
static inline bool ad7192_valid_external_frequency(u32 freq)
{
return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
freq <= AD7192_EXT_FREQ_MHZ_MAX);
}
static int ad7192_setup(struct ad7192_state *st,
const struct ad7192_platform_data *pdata)
{
......@@ -224,17 +232,20 @@ static int ad7192_setup(struct ad7192_state *st,
id);
switch (pdata->clock_source_sel) {
case AD7192_CLK_EXT_MCLK1_2:
case AD7192_CLK_EXT_MCLK2:
st->mclk = AD7192_INT_FREQ_MHZ;
break;
case AD7192_CLK_INT:
case AD7192_CLK_INT_CO:
if (pdata->ext_clk_hz)
st->mclk = pdata->ext_clk_hz;
else
st->mclk = AD7192_INT_FREQ_MHZ;
st->mclk = AD7192_INT_FREQ_MHZ;
break;
case AD7192_CLK_EXT_MCLK1_2:
case AD7192_CLK_EXT_MCLK2:
if (ad7192_valid_external_frequency(pdata->ext_clk_hz)) {
st->mclk = pdata->ext_clk_hz;
break;
}
dev_err(&st->sd.spi->dev, "Invalid frequency setting %u\n",
pdata->ext_clk_hz);
ret = -EINVAL;
goto out;
default:
ret = -EINVAL;
goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment