Commit 7d53b809 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

r6040: use (dev|netdev)_<level> macros helpers

Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 82e38177
......@@ -330,7 +330,7 @@ static int r6040_alloc_rxbufs(struct net_device *dev)
do {
skb = netdev_alloc_skb(dev, MAX_BUF_SIZE);
if (!skb) {
printk(KERN_ERR DRV_NAME "%s: failed to alloc skb for rx\n", dev->name);
netdev_err(dev, "failed to alloc skb for rx\n");
rc = -ENOMEM;
goto err_exit;
}
......@@ -410,9 +410,9 @@ static void r6040_tx_timeout(struct net_device *dev)
struct r6040_private *priv = netdev_priv(dev);
void __iomem *ioaddr = priv->base;
printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x "
netdev_warn(dev, "transmit timed out, int enable %4.4x "
"status %4.4x, PHY status %4.4x\n",
dev->name, ioread16(ioaddr + MIER),
ioread16(ioaddr + MIER),
ioread16(ioaddr + MISR),
r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
......@@ -897,7 +897,7 @@ static netdev_tx_t r6040_start_xmit(struct sk_buff *skb,
if (!lp->tx_free_desc) {
spin_unlock_irqrestore(&lp->lock, flags);
netif_stop_queue(dev);
printk(KERN_ERR DRV_NAME ": no tx descriptor\n");
netdev_err(dev, ": no tx descriptor\n");
return NETDEV_TX_BUSY;
}
......@@ -1090,20 +1090,20 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
/* this should always be supported */
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
printk(KERN_ERR DRV_NAME ": 32-bit PCI DMA addresses"
dev_err(&pdev->dev, "32-bit PCI DMA addresses"
"not supported by the card\n");
goto err_out;
}
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
printk(KERN_ERR DRV_NAME ": 32-bit PCI DMA addresses"
dev_err(&pdev->dev, "32-bit PCI DMA addresses"
"not supported by the card\n");
goto err_out;
}
/* IO Size check */
if (pci_resource_len(pdev, bar) < io_size) {
printk(KERN_ERR DRV_NAME ": Insufficient PCI resources, aborting\n");
dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
err = -EIO;
goto err_out;
}
......@@ -1112,7 +1112,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
dev = alloc_etherdev(sizeof(struct r6040_private));
if (!dev) {
printk(KERN_ERR DRV_NAME ": Failed to allocate etherdev\n");
dev_err(&pdev->dev, "Failed to allocate etherdev\n");
err = -ENOMEM;
goto err_out;
}
......@@ -1122,14 +1122,13 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
dev_err(&pdev->dev, "Failed to request PCI regions\n");
goto err_out_free_dev;
}
ioaddr = pci_iomap(pdev, bar, io_size);
if (!ioaddr) {
printk(KERN_ERR DRV_NAME ": ioremap failed for device %s\n",
pci_name(pdev));
dev_err(&pdev->dev, "ioremap failed for device\n");
err = -EIO;
goto err_out_free_res;
}
......@@ -1156,7 +1155,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
/* Some bootloader/BIOSes do not initialize
* MAC address, warn about that */
if (!(adrp[0] || adrp[1] || adrp[2])) {
printk(KERN_WARNING DRV_NAME ": MAC address not initialized, generating random\n");
netdev_warn(dev, "MAC address not initialized, generating random\n");
random_ether_addr(dev->dev_addr);
}
......@@ -1184,7 +1183,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
/* Check the vendor ID on the PHY, if 0xffff assume none attached */
if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n");
dev_err(&pdev->dev, "Failed to detect an attached PHY\n");
err = -ENODEV;
goto err_out_unmap;
}
......@@ -1192,7 +1191,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
/* Register net device. After this dev->name assign */
err = register_netdev(dev);
if (err) {
printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
dev_err(&pdev->dev, "Failed to register net device\n");
goto err_out_unmap;
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment