Merge branch 'net-bridge-multiple-spanning-trees'
Tobias Waldekranz says: ==================== net: bridge: Multiple Spanning Trees The bridge has had per-VLAN STP support for a while now, since: https://lore.kernel.org/netdev/20200124114022.10883-1-nikolay@cumulusnetworks.com/ The current implementation has some problems: - The mapping from VLAN to STP state is fixed as 1:1, i.e. each VLAN is managed independently. This is awkward from an MSTP (802.1Q-2018, Clause 13.5) point of view, where the model is that multiple VLANs are grouped into MST instances. Because of the way that the standard is written, presumably, this is also reflected in hardware implementations. It is not uncommon for a switch to support the full 4k range of VIDs, but that the pool of MST instances is much smaller. Some examples: Marvell LinkStreet (mv88e6xxx): 4k VLANs, but only 64 MSTIs Marvell Prestera: 4k VLANs, but only 128 MSTIs Microchip SparX-5i: 4k VLANs, but only 128 MSTIs - By default, the feature is enabled, and there is no way to disable it. This makes it hard to add offloading in a backwards compatible way, since any underlying switchdevs have no way to refuse the function if the hardware does not support it - The port-global STP state has precedence over per-VLAN states. In MSTP, as far as I understand it, all VLANs will use the common spanning tree (CST) by default - through traffic engineering you can then optimize your network to group subsets of VLANs to use different trees (MSTI). To my understanding, the way this is typically managed in silicon is roughly: Incoming packet: .----.----.--------------.----.------------- | DA | SA | 802.1Q VID=X | ET | Payload ... '----'----'--------------'----'------------- | '->|\ .----------------------------. | +--> | VID | Members | ... | MSTI | PVID -->|/ |-----|---------|-----|------| | 1 | 0001001 | ... | 0 | | 2 | 0001010 | ... | 10 | | 3 | 0001100 | ... | 10 | '----------------------------' | .-----------------------------' | .------------------------. '->| MSTI | Fwding | Lrning | |------|--------|--------| | 0 | 111110 | 111110 | | 10 | 110111 | 110111 | '------------------------' What this is trying to show is that the STP state (whether MSTP is used, or ye olde STP) is always accessed via the VLAN table. If STP is running, all MSTI pointers in that table will reference the same index in the STP stable - if MSTP is running, some VLANs may point to other trees (like in this example). The fact that in the Linux bridge, the global state (think: index 0 in most hardware implementations) is supposed to override the per-VLAN state, is very awkward to offload. In effect, this means that when the global state changes to blocking, drivers will have to iterate over all MSTIs in use, and alter them all to match. This also means that you have to cache whether the hardware state is currently tracking the global state or the per-VLAN state. In the first case, you also have to cache the per-VLAN state so that you can restore it if the global state transitions back to forwarding. This series adds a new mst_enable bridge setting (as suggested by Nik) that can only be changed when no VLANs are configured on the bridge. Enabling this mode has the following effect: - The port-global STP state is used to represent the CST (Common Spanning Tree) (1/15) - Ingress STP filtering is deferred until the frame's VLAN has been resolved (1/15) - The preexisting per-VLAN states can no longer be controlled directly (1/15). They are instead placed under the MST module's control, which is managed using a new netlink interface (described in 3/15) - VLANs can br mapped to MSTIs in an arbitrary M:N fashion, using a new global VLAN option (2/15) Switchdev notifications are added so that a driver can track: - MST enabled state - VID to MSTI mappings - MST port states An offloading implementation is this provided for mv88e6xxx. ==================== Link: https://lore.kernel.org/r/20220316150857.2442916-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
Showing
This diff is collapsed.
This diff is collapsed.
net/bridge/br_mst.c
0 → 100644
Please register or sign in to comment