Merge tag 'leds_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED core improvements:
   - Fix misleading comment after workqueue removal from drivers
   - Avoid error message when a USB LED device is unplugged
   - Add helpers for calling brightness_set(_blocking)

  LED triggers:
   - Simplify led_trigger_store by using sysfs_streq()

  LED class drivers improvements:
   - Improve wording and formatting in a comment: lp3944
   - Fix return value check in create_gpio_led(): leds-gpio
   - Use GPIOF_OUT_INIT_LOW instead of hardcoded zero: leds-gpio
   - Use devm_led_classdev_register(): leds-lm3533, leds-lm3533,
     leds-lp8788, leds-wm831x-status, leds-s3c24xx, leds-s3c24xx,
     leds-max8997.

  New LED class driver:
   - Add driver for the ISSI IS31FL32xx family of LED controllers.

  Device Tree documentation:
   - of: Add vendor prefixes for Integrated Silicon Solutions Inc.
     (issi) and Si-En Technology (si-en).
   - DT: Add common bindings for Si-En Technology SN3216/18 and
     IS31FL32xx family of LED controllers, since they seem to be the
     same hardware, just rebranded"

* tag 'leds_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: triggers: simplify led_trigger_store
  leds: max8997: Use devm_led_classdev_register
  leds: da903x: Use devm_led_classdev_register
  leds: s3c24xx: Use devm_led_classdev_register
  leds: wm831x-status: Use devm_led_classdev_register
  leds: lp8788: Use devm_led_classdev_register
  leds: 88pm860x: Use devm_led_classdev_register
  leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
  of: Add vendor prefix for Si-En Technology
  leds: Add driver for the ISSI IS31FL32xx family of LED controllers
  DT: leds: Add binding for the ISSI IS31FL32xx family of LED controllers
  DT: Add vendor prefix for Integrated Silicon Solutions Inc.
  leds: lm3533: Use devm_led_classdev_register
  leds: gpio: Use GPIOF_OUT_INIT_LOW instead of hardcoded zero
  leds: core: add helpers for calling brightness_set(_blocking)
  leds: leds-gpio: Fix return value check in create_gpio_led()
  leds: lp3944: improve wording and formatting in a comment
  leds: core: avoid error message when a USB LED device is unplugged
  leds: core: fix misleading comment after workqueue removal from drivers

Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt

+Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
+
+The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
+constant-current channels, each with independent 256-level PWM control.
+Each LED is represented as a sub-node of the device.
+
+Required properties:
+- compatible: one of
+	issi,is31fl3236
+	issi,is31fl3235
+	issi,is31fl3218
+	issi,is31fl3216
+	si-en,sn3218
+	si-en,sn3216
+- reg: I2C slave address
+- address-cells : must be 1
+- size-cells : must be 0
+
+LED sub-node properties:
+- reg : LED channel number (1..N)
+- label :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+
+
+Example:
+
+is31fl3236: led-controller@3c {
+	compatible = "issi,is31fl3236";
+	reg = <0x3c>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@1 {
+		reg = <1>;
+		label = "EB:blue:usr0";
+	};
+	led@2 {
+		reg = <2>;
+		label = "EB:blue:usr1";
+	};
+	...
+	led@36 {
+		reg = <36>;
+		label = "EB:blue:usr35";
+	};
+};
+
+For more product information please see the links below:
+http://www.issi.com/US/product-analog-fxled-driver.shtml
+http://www.si-en.com/product.asp?parentid=890

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -120,6 +120,7 @@ intercontrol	Inter Control Group
 invensense	InvenSense Inc.
 isee	ISEE 2007 S.L.
 isil	Intersil
+issi	Integrated Silicon Solutions Inc.
 jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
@@ -204,6 +205,7 @@ seagate	Seagate Technology PLC
 semtech	Semtech Corporation
 sgx	SGX Sensortech
 sharp	Sharp Corporation
+si-en	Si-En Technology Ltd.
 sigma	Sigma Designs, Inc.
 sil	Silicon Image
 silabs	Silicon Laboratories

drivers/leds/Kconfig

@@ -568,6 +568,14 @@ config LEDS_SEAD3
 	  This driver can also be built as a module. If so the module
 	  will be called leds-sead3.
 
+config LEDS_IS31FL32XX
+	tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
+	depends on LEDS_CLASS && I2C && OF
+	help
+	  Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
+	  LED controllers. They are I2C devices with multiple constant-current
+	  channels, each with independent 256-level PWM control.
+
 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM

drivers/leds/Makefile

@@ -66,6 +66,7 @@ obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
 obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
+obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

drivers/leds/led-class.c

@@ -245,6 +245,8 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 	up_write(&led_cdev->trigger_lock);
 #endif
 
+	led_cdev->flags |= LED_UNREGISTERING;
+
 	/* Stop blinking */
 	led_stop_software_blink(led_cdev);
 

drivers/leds/led-core.c

@@ -25,6 +25,26 @@ EXPORT_SYMBOL_GPL(leds_list_lock);
 LIST_HEAD(leds_list);
 EXPORT_SYMBOL_GPL(leds_list);
 
+static int __led_set_brightness(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	if (!led_cdev->brightness_set)
+		return -ENOTSUPP;
+
+	led_cdev->brightness_set(led_cdev, value);
+
+	return 0;
+}
+
+static int __led_set_brightness_blocking(struct led_classdev *led_cdev,
+					 enum led_brightness value)
+{
+	if (!led_cdev->brightness_set_blocking)
+		return -ENOTSUPP;
+
+	return led_cdev->brightness_set_blocking(led_cdev, value);
+}
+
 static void led_timer_function(unsigned long data)
 {
 	struct led_classdev *led_cdev = (void *)data;
@@ -91,14 +111,14 @@ static void set_brightness_delayed(struct work_struct *ws)
 		led_cdev->flags &= ~LED_BLINK_DISABLE;
 	}
 
-	if (led_cdev->brightness_set)
-		led_cdev->brightness_set(led_cdev, led_cdev->delayed_set_value);
-	else if (led_cdev->brightness_set_blocking)
-		ret = led_cdev->brightness_set_blocking(led_cdev,
-						led_cdev->delayed_set_value);
-	else
-		ret = -ENOTSUPP;
-	if (ret < 0)
+	ret = __led_set_brightness(led_cdev, led_cdev->delayed_set_value);
+	if (ret == -ENOTSUPP)
+		ret = __led_set_brightness_blocking(led_cdev,
+					led_cdev->delayed_set_value);
+	if (ret < 0 &&
+	    /* LED HW might have been unplugged, therefore don't warn */
+	    !(ret == -ENODEV && (led_cdev->flags & LED_UNREGISTERING) &&
+	    (led_cdev->flags & LED_HW_PLUGGABLE)))
 		dev_err(led_cdev->dev,
 			"Setting an LED's brightness failed (%d)\n", ret);
 }
@@ -233,10 +253,8 @@ void led_set_brightness_nopm(struct led_classdev *led_cdev,
 			      enum led_brightness value)
 {
 	/* Use brightness_set op if available, it is guaranteed not to sleep */
-	if (led_cdev->brightness_set) {
-		led_cdev->brightness_set(led_cdev, value);
+	if (!__led_set_brightness(led_cdev, value))
 		return;
-	}
 
 	/* If brightness setting can sleep, delegate it to a work queue task */
 	led_cdev->delayed_set_value = value;
@@ -267,10 +285,7 @@ int led_set_brightness_sync(struct led_classdev *led_cdev,
 	if (led_cdev->flags & LED_SUSPENDED)
 		return 0;
 
-	if (led_cdev->brightness_set_blocking)
-		return led_cdev->brightness_set_blocking(led_cdev,
-							 led_cdev->brightness);
-	return -ENOTSUPP;
+	return __led_set_brightness_blocking(led_cdev, led_cdev->brightness);
 }
 EXPORT_SYMBOL_GPL(led_set_brightness_sync);
 

drivers/leds/led-triggers.c

@@ -34,9 +34,7 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t count)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	char trigger_name[TRIG_NAME_MAX];
 	struct led_trigger *trig;
-	size_t len;
 	int ret = count;
 
 	mutex_lock(&led_cdev->led_access);
@@ -46,21 +44,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
 		goto unlock;
 	}
 
-	trigger_name[sizeof(trigger_name) - 1] = '\0';
-	strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
-	len = strlen(trigger_name);
-
-	if (len && trigger_name[len - 1] == '\n')
-		trigger_name[len - 1] = '\0';
-
-	if (!strcmp(trigger_name, "none")) {
+	if (sysfs_streq(buf, "none")) {
 		led_trigger_remove(led_cdev);
 		goto unlock;
 	}
 
 	down_read(&triggers_list_lock);
 	list_for_each_entry(trig, &trigger_list, next_trig) {
-		if (!strcmp(trigger_name, trig->name)) {
+		if (sysfs_streq(buf, trig->name)) {
 			down_write(&led_cdev->trigger_lock);
 			led_trigger_set(led_cdev, trig);
 			up_write(&led_cdev->trigger_lock);

drivers/leds/leds-88pm860x.c

@@ -195,7 +195,6 @@ static int pm860x_led_probe(struct platform_device *pdev)
 		sprintf(data->name, "led1-blue");
 		break;
 	}
-	platform_set_drvdata(pdev, data);
 	data->chip = chip;
 	data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
 	data->port = pdev->id;
@@ -208,7 +207,7 @@ static int pm860x_led_probe(struct platform_device *pdev)
 	data->cdev.brightness_set_blocking = pm860x_led_set;
 	mutex_init(&data->lock);
 
-	ret = led_classdev_register(chip->dev, &data->cdev);
+	ret = devm_led_classdev_register(chip->dev, &data->cdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
 		return ret;
@@ -217,21 +216,12 @@ static int pm860x_led_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int pm860x_led_remove(struct platform_device *pdev)
-{
-	struct pm860x_led *data = platform_get_drvdata(pdev);
-
-	led_classdev_unregister(&data->cdev);
-
-	return 0;
-}
 
 static struct platform_driver pm860x_led_driver = {
 	.driver	= {
 		.name	= "88pm860x-led",
 	},
 	.probe	= pm860x_led_probe,
-	.remove	= pm860x_led_remove,
 };
 
 module_platform_driver(pm860x_led_driver);

drivers/leds/leds-da903x.c

@@ -113,21 +113,12 @@ static int da903x_led_probe(struct platform_device *pdev)
 	led->flags = pdata->flags;
 	led->master = pdev->dev.parent;
 
-	ret = led_classdev_register(led->master, &led->cdev);
+	ret = devm_led_classdev_register(led->master, &led->cdev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register LED %d\n", id);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, led);
-	return 0;
-}
-
-static int da903x_led_remove(struct platform_device *pdev)
-{
-	struct da903x_led *led = platform_get_drvdata(pdev);
-
-	led_classdev_unregister(&led->cdev);
 	return 0;
 }
 
@@ -136,7 +127,6 @@ static struct platform_driver da903x_led_driver = {
 		.name	= "da903x-led",
 	},
 	.probe		= da903x_led_probe,
-	.remove		= da903x_led_remove,
 };
 
 module_platform_driver(da903x_led_driver);

drivers/leds/leds-gpio.c

@@ -86,7 +86,7 @@ static int create_gpio_led(const struct gpio_led *template,
 		 * still uses GPIO numbers. Ultimately we would like to get
 		 * rid of this block completely.
 		 */
-		unsigned long flags = 0;
+		unsigned long flags = GPIOF_OUT_INIT_LOW;
 
 		/* skip leds that aren't available */
 		if (!gpio_is_valid(template->gpio)) {
@@ -104,8 +104,8 @@ static int create_gpio_led(const struct gpio_led *template,
 			return ret;
 
 		led_dat->gpiod = gpio_to_desc(template->gpio);
-		if (IS_ERR(led_dat->gpiod))
-			return PTR_ERR(led_dat->gpiod);
+		if (!led_dat->gpiod)
+			return -EINVAL;
 	}
 
 	led_dat->cdev.name = template->name;

drivers/leds/leds-lm3533.c

@@ -698,7 +698,7 @@ static int lm3533_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, led);
 
-	ret = led_classdev_register(pdev->dev.parent, &led->cdev);
+	ret = devm_led_classdev_register(pdev->dev.parent, &led->cdev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
 		return ret;
@@ -708,18 +708,13 @@ static int lm3533_led_probe(struct platform_device *pdev)
 
 	ret = lm3533_led_setup(led, pdata);
 	if (ret)
-		goto err_unregister;
+		return ret;
 
 	ret = lm3533_ctrlbank_enable(&led->cb);
 	if (ret)
-		goto err_unregister;
+		return ret;
 
 	return 0;
-
-err_unregister:
-	led_classdev_unregister(&led->cdev);
-
-	return ret;
 }
 
 static int lm3533_led_remove(struct platform_device *pdev)
@@ -729,7 +724,6 @@ static int lm3533_led_remove(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
 	lm3533_ctrlbank_disable(&led->cb);
-	led_classdev_unregister(&led->cdev);
 
 	return 0;
 }

drivers/leds/leds-lp3944.c

@@ -199,8 +199,11 @@ static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
 	if (status > LP3944_LED_STATUS_DIM1)
 		return -EINVAL;
 
-	/* invert only 0 and 1, leave unchanged the other values,
-	 * remember we are abusing status to set blink patterns
+	/*
+	 * Invert status only when it's < 2 (i.e. 0 or 1) which means it's
+	 * controlling the on/off state directly.
+	 * When, instead, status is >= 2 don't invert it because it would mean
+	 * to mess with the hardware blinking mode.
 	 */
 	if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
 		status = 1 - status;

drivers/leds/leds-lp8788.c

@@ -146,15 +146,13 @@ static int lp8788_led_probe(struct platform_device *pdev)
 
 	mutex_init(&led->lock);
 
-	platform_set_drvdata(pdev, led);
-
 	ret = lp8788_led_init_device(led, led_pdata);
 	if (ret) {
 		dev_err(dev, "led init device err: %d\n", ret);
 		return ret;
 	}
 
-	ret = led_classdev_register(dev, &led->led_dev);
+	ret = devm_led_classdev_register(dev, &led->led_dev);
 	if (ret) {
 		dev_err(dev, "led register err: %d\n", ret);
 		return ret;
@@ -163,18 +161,8 @@ static int lp8788_led_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int lp8788_led_remove(struct platform_device *pdev)
-{
-	struct lp8788_led *led = platform_get_drvdata(pdev);
-
-	led_classdev_unregister(&led->led_dev);
-
-	return 0;
-}
-
 static struct platform_driver lp8788_led_driver = {
 	.probe = lp8788_led_probe,
-	.remove = lp8788_led_remove,
 	.driver = {
 		.name = LP8788_DEV_KEYLED,
 	},

drivers/leds/leds-max8997.c

@@ -281,30 +281,18 @@ static int max8997_led_probe(struct platform_device *pdev)
 
 	mutex_init(&led->mutex);
 
-	platform_set_drvdata(pdev, led);
-
-	ret = led_classdev_register(&pdev->dev, &led->cdev);
+	ret = devm_led_classdev_register(&pdev->dev, &led->cdev);
 	if (ret < 0)
 		return ret;
 
 	return 0;
 }
 
-static int max8997_led_remove(struct platform_device *pdev)
-{
-	struct max8997_led *led = platform_get_drvdata(pdev);
-
-	led_classdev_unregister(&led->cdev);
-
-	return 0;
-}
-
 static struct platform_driver max8997_led_driver = {
 	.driver = {
 		.name  = "max8997-led",
 	},
 	.probe  = max8997_led_probe,
-	.remove = max8997_led_remove,
 };
 
 module_platform_driver(max8997_led_driver);

drivers/leds/leds-s3c24xx.c

@@ -29,11 +29,6 @@ struct s3c24xx_gpio_led {
 	struct s3c24xx_led_platdata	*pdata;
 };
 
-static inline struct s3c24xx_gpio_led *pdev_to_gpio(struct platform_device *dev)
-{
-	return platform_get_drvdata(dev);
-}
-
 static inline struct s3c24xx_gpio_led *to_gpio(struct led_classdev *led_cdev)
 {
 	return container_of(led_cdev, struct s3c24xx_gpio_led, cdev);
@@ -59,15 +54,6 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev,
 	}
 }
 
-static int s3c24xx_led_remove(struct platform_device *dev)
-{
-	struct s3c24xx_gpio_led *led = pdev_to_gpio(dev);
-
-	led_classdev_unregister(&led->cdev);
-
-	return 0;
-}
-
 static int s3c24xx_led_probe(struct platform_device *dev)
 {
 	struct s3c24xx_led_platdata *pdata = dev_get_platdata(&dev->dev);
@@ -79,8 +65,6 @@ static int s3c24xx_led_probe(struct platform_device *dev)
 	if (!led)
 		return -ENOMEM;
 
-	platform_set_drvdata(dev, led);
-
 	led->cdev.brightness_set = s3c24xx_led_set;
 	led->cdev.default_trigger = pdata->def_trigger;
 	led->cdev.name = pdata->name;
@@ -104,7 +88,7 @@ static int s3c24xx_led_probe(struct platform_device *dev)
 
 	/* register our new led device */
 
-	ret = led_classdev_register(&dev->dev, &led->cdev);
+	ret = devm_led_classdev_register(&dev->dev, &led->cdev);
 	if (ret < 0)
 		dev_err(&dev->dev, "led_classdev_register failed\n");
 
@@ -113,7 +97,6 @@ static int s3c24xx_led_probe(struct platform_device *dev)
 
 static struct platform_driver s3c24xx_led_driver = {
 	.probe		= s3c24xx_led_probe,
-	.remove		= s3c24xx_led_remove,
 	.driver		= {
 		.name		= "s3c24xx_led",
 	},

drivers/leds/leds-wm831x-status.c

@@ -239,7 +239,6 @@ static int wm831x_status_probe(struct platform_device *pdev)
 			       GFP_KERNEL);
 	if (!drvdata)
 		return -ENOMEM;
-	platform_set_drvdata(pdev, drvdata);
 
 	drvdata->wm831x = wm831x;
 	drvdata->reg = res->start;
@@ -284,7 +283,7 @@ static int wm831x_status_probe(struct platform_device *pdev)
 	drvdata->cdev.blink_set = wm831x_status_blink_set;
 	drvdata->cdev.groups = wm831x_status_groups;
 
-	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+	ret = devm_led_classdev_register(wm831x->dev, &drvdata->cdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
 		return ret;
@@ -293,21 +292,11 @@ static int wm831x_status_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int wm831x_status_remove(struct platform_device *pdev)
-{
-	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
-
-	led_classdev_unregister(&drvdata->cdev);
-
-	return 0;
-}
-
 static struct platform_driver wm831x_status_driver = {
 	.driver = {
 		   .name = "wm831x-status",
 		   },
 	.probe = wm831x_status_probe,
-	.remove = wm831x_status_remove,
 };
 
 module_platform_driver(wm831x_status_driver);

include/linux/leds.h

@@ -39,6 +39,7 @@ struct led_classdev {
 
 	/* Lower 16 bits reflect status */
 #define LED_SUSPENDED		(1 << 0)
+#define LED_UNREGISTERING	(1 << 1)
 	/* Upper 16 bits reflect control information */
 #define LED_CORE_SUSPENDRESUME	(1 << 16)
 #define LED_BLINK_ONESHOT	(1 << 17)
@@ -48,9 +49,12 @@ struct led_classdev {
 #define LED_BLINK_DISABLE	(1 << 21)
 #define LED_SYSFS_DISABLE	(1 << 22)
 #define LED_DEV_CAP_FLASH	(1 << 23)
+#define LED_HW_PLUGGABLE	(1 << 24)
 
-	/* Set LED brightness level */
-	/* Must not sleep, use a workqueue if needed */
+	/* Set LED brightness level
+	 * Must not sleep. Use brightness_set_blocking for drivers
+	 * that can sleep while setting brightness.
+	 */
 	void		(*brightness_set)(struct led_classdev *led_cdev,
 					  enum led_brightness brightness);
 	/*