arm64: dts: qcom: sc8280xp: describe USB signals properly

Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240512-typec-fix-sm8250-v4-7-ad153c747a97@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

@@ -56,7 +56,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -91,7 +91,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -675,6 +675,10 @@ &usb_0_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -700,10 +704,6 @@ &usb_0_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -712,6 +712,10 @@ &usb_1_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -737,10 +741,6 @@ &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -117,7 +117,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -152,7 +152,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -1131,6 +1131,10 @@ &usb_0_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1156,10 +1160,6 @@ &usb_0_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -1168,6 +1168,10 @@ &usb_1_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1193,10 +1197,6 @@ &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_2 {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -3222,6 +3222,14 @@ port@0 {
 					usb_0_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3275,6 +3283,14 @@ port@0 {
 					usb_1_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3560,8 +3576,23 @@ usb_0_dwc3: usb@a600000 {
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_0_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_0_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_0_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_0_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3622,8 +3653,23 @@ usb_1_dwc3: usb@a800000 {
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};