Commit 94edf6f3 authored by Ingo Molnar's avatar Ingo Molnar

Merge branch 'for-mingo' of...

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul E. McKenney:

 - Removal of spin_unlock_wait()
 - SRCU updates
 - Torture-test updates
 - Documentation updates
 - Miscellaneous fixes
 - CPU-hotplug fixes
 - Miscellaneous non-RCU fixes
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parents d5da6457 656e7c0c
......@@ -2080,6 +2080,8 @@ Some of the relevant points of interest are as follows:
<li> <a href="#Scheduler and RCU">Scheduler and RCU</a>.
<li> <a href="#Tracing and RCU">Tracing and RCU</a>.
<li> <a href="#Energy Efficiency">Energy Efficiency</a>.
<li> <a href="#Scheduling-Clock Interrupts and RCU">
Scheduling-Clock Interrupts and RCU</a>.
<li> <a href="#Memory Efficiency">Memory Efficiency</a>.
<li> <a href="#Performance, Scalability, Response Time, and Reliability">
Performance, Scalability, Response Time, and Reliability</a>.
......@@ -2532,6 +2534,134 @@ I learned of many of these requirements via angry phone calls:
Flaming me on the Linux-kernel mailing list was apparently not
sufficient to fully vent their ire at RCU's energy-efficiency bugs!
<h3><a name="Scheduling-Clock Interrupts and RCU">
Scheduling-Clock Interrupts and RCU</a></h3>
<p>
The kernel transitions between in-kernel non-idle execution, userspace
execution, and the idle loop.
Depending on kernel configuration, RCU handles these states differently:
<table border=3>
<tr><th><tt>HZ</tt> Kconfig</th>
<th>In-Kernel</th>
<th>Usermode</th>
<th>Idle</th></tr>
<tr><th align="left"><tt>HZ_PERIODIC</tt></th>
<td>Can rely on scheduling-clock interrupt.</td>
<td>Can rely on scheduling-clock interrupt and its
detection of interrupt from usermode.</td>
<td>Can rely on RCU's dyntick-idle detection.</td></tr>
<tr><th align="left"><tt>NO_HZ_IDLE</tt></th>
<td>Can rely on scheduling-clock interrupt.</td>
<td>Can rely on scheduling-clock interrupt and its
detection of interrupt from usermode.</td>
<td>Can rely on RCU's dyntick-idle detection.</td></tr>
<tr><th align="left"><tt>NO_HZ_FULL</tt></th>
<td>Can only sometimes rely on scheduling-clock interrupt.
In other cases, it is necessary to bound kernel execution
times and/or use IPIs.</td>
<td>Can rely on RCU's dyntick-idle detection.</td>
<td>Can rely on RCU's dyntick-idle detection.</td></tr>
</table>
<table>
<tr><th>&nbsp;</th></tr>
<tr><th align="left">Quick Quiz:</th></tr>
<tr><td>
Why can't <tt>NO_HZ_FULL</tt> in-kernel execution rely on the
scheduling-clock interrupt, just like <tt>HZ_PERIODIC</tt>
and <tt>NO_HZ_IDLE</tt> do?
</td></tr>
<tr><th align="left">Answer:</th></tr>
<tr><td bgcolor="#ffffff"><font color="ffffff">
Because, as a performance optimization, <tt>NO_HZ_FULL</tt>
does not necessarily re-enable the scheduling-clock interrupt
on entry to each and every system call.
</font></td></tr>
<tr><td>&nbsp;</td></tr>
</table>
<p>
However, RCU must be reliably informed as to whether any given
CPU is currently in the idle loop, and, for <tt>NO_HZ_FULL</tt>,
also whether that CPU is executing in usermode, as discussed
<a href="#Energy Efficiency">earlier</a>.
It also requires that the scheduling-clock interrupt be enabled when
RCU needs it to be:
<ol>
<li> If a CPU is either idle or executing in usermode, and RCU believes
it is non-idle, the scheduling-clock tick had better be running.
Otherwise, you will get RCU CPU stall warnings. Or at best,
very long (11-second) grace periods, with a pointless IPI waking
the CPU from time to time.
<li> If a CPU is in a portion of the kernel that executes RCU read-side
critical sections, and RCU believes this CPU to be idle, you will get
random memory corruption. <b>DON'T DO THIS!!!</b>
<br>This is one reason to test with lockdep, which will complain
about this sort of thing.
<li> If a CPU is in a portion of the kernel that is absolutely
positively no-joking guaranteed to never execute any RCU read-side
critical sections, and RCU believes this CPU to to be idle,
no problem. This sort of thing is used by some architectures
for light-weight exception handlers, which can then avoid the
overhead of <tt>rcu_irq_enter()</tt> and <tt>rcu_irq_exit()</tt>
at exception entry and exit, respectively.
Some go further and avoid the entireties of <tt>irq_enter()</tt>
and <tt>irq_exit()</tt>.
<br>Just make very sure you are running some of your tests with
<tt>CONFIG_PROVE_RCU=y</tt>, just in case one of your code paths
was in fact joking about not doing RCU read-side critical sections.
<li> If a CPU is executing in the kernel with the scheduling-clock
interrupt disabled and RCU believes this CPU to be non-idle,
and if the CPU goes idle (from an RCU perspective) every few
jiffies, no problem. It is usually OK for there to be the
occasional gap between idle periods of up to a second or so.
<br>If the gap grows too long, you get RCU CPU stall warnings.
<li> If a CPU is either idle or executing in usermode, and RCU believes
it to be idle, of course no problem.
<li> If a CPU is executing in the kernel, the kernel code
path is passing through quiescent states at a reasonable
frequency (preferably about once per few jiffies, but the
occasional excursion to a second or so is usually OK) and the
scheduling-clock interrupt is enabled, of course no problem.
<br>If the gap between a successive pair of quiescent states grows
too long, you get RCU CPU stall warnings.
</ol>
<table>
<tr><th>&nbsp;</th></tr>
<tr><th align="left">Quick Quiz:</th></tr>
<tr><td>
But what if my driver has a hardware interrupt handler
that can run for many seconds?
I cannot invoke <tt>schedule()</tt> from an hardware
interrupt handler, after all!
</td></tr>
<tr><th align="left">Answer:</th></tr>
<tr><td bgcolor="#ffffff"><font color="ffffff">
One approach is to do <tt>rcu_irq_exit();rcu_irq_enter();</tt>
every so often.
But given that long-running interrupt handlers can cause
other problems, not least for response time, shouldn't you
work to keep your interrupt handler's runtime within reasonable
bounds?
</font></td></tr>
<tr><td>&nbsp;</td></tr>
</table>
<p>
But as long as RCU is properly informed of kernel state transitions between
in-kernel execution, usermode execution, and idle, and as long as the
scheduling-clock interrupt is enabled when RCU needs it to be, you
can rest assured that the bugs you encounter will be in some other
part of RCU or some other part of the kernel!
<h3><a name="Memory Efficiency">Memory Efficiency</a></h3>
<p>
......
......@@ -23,6 +23,14 @@ over a rather long period of time, but improvements are always welcome!
Yet another exception is where the low real-time latency of RCU's
read-side primitives is critically important.
One final exception is where RCU readers are used to prevent
the ABA problem (https://en.wikipedia.org/wiki/ABA_problem)
for lockless updates. This does result in the mildly
counter-intuitive situation where rcu_read_lock() and
rcu_read_unlock() are used to protect updates, however, this
approach provides the same potential simplifications that garbage
collectors do.
1. Does the update code have proper mutual exclusion?
RCU does allow -readers- to run (almost) naked, but -writers- must
......@@ -40,7 +48,9 @@ over a rather long period of time, but improvements are always welcome!
explain how this single task does not become a major bottleneck on
big multiprocessor machines (for example, if the task is updating
information relating to itself that other tasks can read, there
by definition can be no bottleneck).
by definition can be no bottleneck). Note that the definition
of "large" has changed significantly: Eight CPUs was "large"
in the year 2000, but a hundred CPUs was unremarkable in 2017.
2. Do the RCU read-side critical sections make proper use of
rcu_read_lock() and friends? These primitives are needed
......@@ -55,6 +65,12 @@ over a rather long period of time, but improvements are always welcome!
Disabling of preemption can serve as rcu_read_lock_sched(), but
is less readable.
Letting RCU-protected pointers "leak" out of an RCU read-side
critical section is every bid as bad as letting them leak out
from under a lock. Unless, of course, you have arranged some
other means of protection, such as a lock or a reference count
-before- letting them out of the RCU read-side critical section.
3. Does the update code tolerate concurrent accesses?
The whole point of RCU is to permit readers to run without
......@@ -78,10 +94,10 @@ over a rather long period of time, but improvements are always welcome!
This works quite well, also.
c. Make updates appear atomic to readers. For example,
c. Make updates appear atomic to readers. For example,
pointer updates to properly aligned fields will
appear atomic, as will individual atomic primitives.
Sequences of perations performed under a lock will -not-
Sequences of operations performed under a lock will -not-
appear to be atomic to RCU readers, nor will sequences
of multiple atomic primitives.
......@@ -168,8 +184,8 @@ over a rather long period of time, but improvements are always welcome!
5. If call_rcu(), or a related primitive such as call_rcu_bh(),
call_rcu_sched(), or call_srcu() is used, the callback function
must be written to be called from softirq context. In particular,
it cannot block.
will be called from softirq context. In particular, it cannot
block.
6. Since synchronize_rcu() can block, it cannot be called from
any sort of irq context. The same rule applies for
......@@ -178,11 +194,14 @@ over a rather long period of time, but improvements are always welcome!
synchronize_sched_expedite(), and synchronize_srcu_expedited().
The expedited forms of these primitives have the same semantics
as the non-expedited forms, but expediting is both expensive
and unfriendly to real-time workloads. Use of the expedited
primitives should be restricted to rare configuration-change
operations that would not normally be undertaken while a real-time
workload is running.
as the non-expedited forms, but expediting is both expensive and
(with the exception of synchronize_srcu_expedited()) unfriendly
to real-time workloads. Use of the expedited primitives should
be restricted to rare configuration-change operations that would
not normally be undertaken while a real-time workload is running.
However, real-time workloads can use rcupdate.rcu_normal kernel
boot parameter to completely disable expedited grace periods,
though this might have performance implications.
In particular, if you find yourself invoking one of the expedited
primitives repeatedly in a loop, please do everyone a favor:
......@@ -193,11 +212,6 @@ over a rather long period of time, but improvements are always welcome!
of the system, especially to real-time workloads running on
the rest of the system.
In addition, it is illegal to call the expedited forms from
a CPU-hotplug notifier, or while holding a lock that is acquired
by a CPU-hotplug notifier. Failing to observe this restriction
will result in deadlock.
7. If the updater uses call_rcu() or synchronize_rcu(), then the
corresponding readers must use rcu_read_lock() and
rcu_read_unlock(). If the updater uses call_rcu_bh() or
......@@ -321,7 +335,7 @@ over a rather long period of time, but improvements are always welcome!
Similarly, disabling preemption is not an acceptable substitute
for rcu_read_lock(). Code that attempts to use preemption
disabling where it should be using rcu_read_lock() will break
in real-time kernel builds.
in CONFIG_PREEMPT=y kernel builds.
If you want to wait for interrupt handlers, NMI handlers, and
code under the influence of preempt_disable(), you instead
......@@ -356,23 +370,22 @@ over a rather long period of time, but improvements are always welcome!
not the case, a self-spawning RCU callback would prevent the
victim CPU from ever going offline.)
14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(),
synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu())
may only be invoked from process context. Unlike other forms of
RCU, it -is- permissible to block in an SRCU read-side critical
section (demarked by srcu_read_lock() and srcu_read_unlock()),
hence the "SRCU": "sleepable RCU". Please note that if you
don't need to sleep in read-side critical sections, you should be
using RCU rather than SRCU, because RCU is almost always faster
and easier to use than is SRCU.
Also unlike other forms of RCU, explicit initialization
and cleanup is required via init_srcu_struct() and
cleanup_srcu_struct(). These are passed a "struct srcu_struct"
that defines the scope of a given SRCU domain. Once initialized,
the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock()
synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu().
A given synchronize_srcu() waits only for SRCU read-side critical
14. Unlike other forms of RCU, it -is- permissible to block in an
SRCU read-side critical section (demarked by srcu_read_lock()
and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
Please note that if you don't need to sleep in read-side critical
sections, you should be using RCU rather than SRCU, because RCU
is almost always faster and easier to use than is SRCU.
Also unlike other forms of RCU, explicit initialization and
cleanup is required either at build time via DEFINE_SRCU()
or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct()
and cleanup_srcu_struct(). These last two are passed a
"struct srcu_struct" that defines the scope of a given
SRCU domain. Once initialized, the srcu_struct is passed
to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(),
synchronize_srcu_expedited(), and call_srcu(). A given
synchronize_srcu() waits only for SRCU read-side critical
sections governed by srcu_read_lock() and srcu_read_unlock()
calls that have been passed the same srcu_struct. This property
is what makes sleeping read-side critical sections tolerable --
......@@ -390,10 +403,16 @@ over a rather long period of time, but improvements are always welcome!
Therefore, SRCU should be used in preference to rw_semaphore
only in extremely read-intensive situations, or in situations
requiring SRCU's read-side deadlock immunity or low read-side
realtime latency.
realtime latency. You should also consider percpu_rw_semaphore
when you need lightweight readers.
Note that, rcu_assign_pointer() relates to SRCU just as it does
to other forms of RCU.
SRCU's expedited primitive (synchronize_srcu_expedited())
never sends IPIs to other CPUs, so it is easier on
real-time workloads than is synchronize_rcu_expedited(),
synchronize_rcu_bh_expedited() or synchronize_sched_expedited().
Note that rcu_dereference() and rcu_assign_pointer() relate to
SRCU just as they do to other forms of RCU.
15. The whole point of call_rcu(), synchronize_rcu(), and friends
is to wait until all pre-existing readers have finished before
......@@ -435,3 +454,33 @@ over a rather long period of time, but improvements are always welcome!
These debugging aids can help you find problems that are
otherwise extremely difficult to spot.
18. If you register a callback using call_rcu(), call_rcu_bh(),
call_rcu_sched(), or call_srcu(), and pass in a function defined
within a loadable module, then it in necessary to wait for
all pending callbacks to be invoked after the last invocation
and before unloading that module. Note that it is absolutely
-not- sufficient to wait for a grace period! The current (say)
synchronize_rcu() implementation waits only for all previous
callbacks registered on the CPU that synchronize_rcu() is running
on, but it is -not- guaranteed to wait for callbacks registered
on other CPUs.
You instead need to use one of the barrier functions:
o call_rcu() -> rcu_barrier()
o call_rcu_bh() -> rcu_barrier_bh()
o call_rcu_sched() -> rcu_barrier_sched()
o call_srcu() -> srcu_barrier()
However, these barrier functions are absolutely -not- guaranteed
to wait for a grace period. In fact, if there are no call_rcu()
callbacks waiting anywhere in the system, rcu_barrier() is within
its rights to return immediately.
So if you need to wait for both an RCU grace period and for
all pre-existing call_rcu() callbacks, you will need to execute
both rcu_barrier() and synchronize_rcu(), if necessary, using
something like workqueues to to execute them concurrently.
See rcubarrier.txt for more information.
......@@ -76,15 +76,12 @@ o I hear that RCU is patented? What is with that?
Of these, one was allowed to lapse by the assignee, and the
others have been contributed to the Linux kernel under GPL.
There are now also LGPL implementations of user-level RCU
available (http://lttng.org/?q=node/18).
available (http://liburcu.org/).
o I hear that RCU needs work in order to support realtime kernels?
This work is largely completed. Realtime-friendly RCU can be
enabled via the CONFIG_PREEMPT_RCU kernel configuration
parameter. However, work is in progress for enabling priority
boosting of preempted RCU read-side critical sections. This is
needed if you have CPU-bound realtime threads.
Realtime-friendly RCU can be enabled via the CONFIG_PREEMPT_RCU
kernel configuration parameter.
o Where can I find more information on RCU?
......
......@@ -25,35 +25,35 @@ o You must use one of the rcu_dereference() family of primitives
for an example where the compiler can in fact deduce the exact
value of the pointer, and thus cause misordering.
o You are only permitted to use rcu_dereference on pointer values.
The compiler simply knows too much about integral values to
trust it to carry dependencies through integer operations.
There are a very few exceptions, namely that you can temporarily
cast the pointer to uintptr_t in order to:
o Set bits and clear bits down in the must-be-zero low-order
bits of that pointer. This clearly means that the pointer
must have alignment constraints, for example, this does
-not- work in general for char* pointers.
o XOR bits to translate pointers, as is done in some
classic buddy-allocator algorithms.
It is important to cast the value back to pointer before
doing much of anything else with it.
o Avoid cancellation when using the "+" and "-" infix arithmetic
operators. For example, for a given variable "x", avoid
"(x-x)". There are similar arithmetic pitfalls from other
arithmetic operators, such as "(x*0)", "(x/(x+1))" or "(x%1)".
The compiler is within its rights to substitute zero for all of
these expressions, so that subsequent accesses no longer depend
on the rcu_dereference(), again possibly resulting in bugs due
to misordering.
"(x-(uintptr_t)x)" for char* pointers. The compiler is within its
rights to substitute zero for this sort of expression, so that
subsequent accesses no longer depend on the rcu_dereference(),
again possibly resulting in bugs due to misordering.
Of course, if "p" is a pointer from rcu_dereference(), and "a"
and "b" are integers that happen to be equal, the expression
"p+a-b" is safe because its value still necessarily depends on
the rcu_dereference(), thus maintaining proper ordering.
o Avoid all-zero operands to the bitwise "&" operator, and
similarly avoid all-ones operands to the bitwise "|" operator.
If the compiler is able to deduce the value of such operands,
it is within its rights to substitute the corresponding constant
for the bitwise operation. Once again, this causes subsequent
accesses to no longer depend on the rcu_dereference(), causing
bugs due to misordering.
Please note that single-bit operands to bitwise "&" can also
be dangerous. At this point, the compiler knows that the
resulting value can only take on one of two possible values.
Therefore, a very small amount of additional information will
allow the compiler to deduce the exact value, which again can
result in misordering.
o If you are using RCU to protect JITed functions, so that the
"()" function-invocation operator is applied to a value obtained
(directly or indirectly) from rcu_dereference(), you may need to
......@@ -61,25 +61,6 @@ o If you are using RCU to protect JITed functions, so that the
This issue arises on some systems when a newly JITed function is
using the same memory that was used by an earlier JITed function.
o Do not use the results from the boolean "&&" and "||" when
dereferencing. For example, the following (rather improbable)
code is buggy:
int *p;
int *q;
...
p = rcu_dereference(gp)
q = &global_q;
q += p != &oom_p1 && p != &oom_p2;
r1 = *q; /* BUGGY!!! */
The reason this is buggy is that "&&" and "||" are often compiled
using branches. While weak-memory machines such as ARM or PowerPC
do order stores after such branches, they can speculate loads,
which can result in misordering bugs.
o Do not use the results from relational operators ("==", "!=",
">", ">=", "<", or "<=") when dereferencing. For example,
the following (quite strange) code is buggy:
......
......@@ -263,6 +263,11 @@ Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes
are delayed for a full grace period? Couldn't this result in
rcu_barrier() returning prematurely?
The current rcu_barrier() implementation is more complex, due to the need
to avoid disturbing idle CPUs (especially on battery-powered systems)
and the need to minimally disturb non-idle CPUs in real-time systems.
However, the code above illustrates the concepts.
rcu_barrier() Summary
......
......@@ -276,15 +276,17 @@ o "Free-Block Circulation": Shows the number of torture structures
somehow gets incremented farther than it should.
Different implementations of RCU can provide implementation-specific
additional information. For example, SRCU provides the following
additional information. For example, Tree SRCU provides the following
additional line:
srcu-torture: per-CPU(idx=1): 0(0,1) 1(0,1) 2(0,0) 3(0,1)
srcud-torture: Tree SRCU per-CPU(idx=0): 0(35,-21) 1(-4,24) 2(1,1) 3(-26,20) 4(28,-47) 5(-9,4) 6(-10,14) 7(-14,11) T(1,6)
This line shows the per-CPU counter state. The numbers in parentheses are
the values of the "old" and "current" counters for the corresponding CPU.
The "idx" value maps the "old" and "current" values to the underlying
array, and is useful for debugging.
This line shows the per-CPU counter state, in this case for Tree SRCU
using a dynamically allocated srcu_struct (hence "srcud-" rather than
"srcu-"). The numbers in parentheses are the values of the "old" and
"current" counters for the corresponding CPU. The "idx" value maps the
"old" and "current" values to the underlying array, and is useful for
debugging. The final "T" entry contains the totals of the counters.
USAGE
......@@ -304,3 +306,9 @@ checked for such errors. The "rmmod" command forces a "SUCCESS",
"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed. The first
two are self-explanatory, while the last indicates that while there
were no RCU failures, CPU-hotplug problems were detected.
However, the tools/testing/selftests/rcutorture/bin/kvm.sh script
provides better automation, including automatic failure analysis.
It assumes a qemu/kvm-enabled platform, and runs guest OSes out of initrd.
See tools/testing/selftests/rcutorture/doc/initrd.txt for instructions
on setting up such an initrd.
......@@ -890,6 +890,8 @@ SRCU: Critical sections Grace period Barrier
srcu_read_lock_held
SRCU: Initialization/cleanup
DEFINE_SRCU
DEFINE_STATIC_SRCU
init_srcu_struct
cleanup_srcu_struct
......@@ -913,7 +915,8 @@ a. Will readers need to block? If so, you need SRCU.
b. What about the -rt patchset? If readers would need to block
in an non-rt kernel, you need SRCU. If readers would block
in a -rt kernel, but not in a non-rt kernel, SRCU is not
necessary.
necessary. (The -rt patchset turns spinlocks into sleeplocks,
hence this distinction.)
c. Do you need to treat NMI handlers, hardirq handlers,
and code segments with preemption disabled (whether
......
......@@ -2633,9 +2633,10 @@
In kernels built with CONFIG_NO_HZ_FULL=y, set
the specified list of CPUs whose tick will be stopped
whenever possible. The boot CPU will be forced outside
the range to maintain the timekeeping.
The CPUs in this range must also be included in the
rcu_nocbs= set.
the range to maintain the timekeeping. Any CPUs
in this list will have their RCU callbacks offloaded,
just as if they had also been called out in the
rcu_nocbs= boot parameter.
noiotrap [SH] Disables trapped I/O port accesses.
......
......@@ -344,3 +344,52 @@ codecs, and devices with strict requirements for interface clocking.
.. kernel-doc:: include/linux/clk.h
:internal:
Synchronization Primitives
==========================
Read-Copy Update (RCU)
----------------------
.. kernel-doc:: include/linux/rcupdate.h
:external:
.. kernel-doc:: include/linux/rcupdate_wait.h
:external:
.. kernel-doc:: include/linux/rcutree.h
:external:
.. kernel-doc:: kernel/rcu/tree.c
:external:
.. kernel-doc:: kernel/rcu/tree_plugin.h
:external:
.. kernel-doc:: kernel/rcu/tree_exp.h
:external:
.. kernel-doc:: kernel/rcu/update.c
:external:
.. kernel-doc:: include/linux/srcu.h
:external:
.. kernel-doc:: kernel/rcu/srcutree.c
:external:
.. kernel-doc:: include/linux/rculist_bl.h
:external:
.. kernel-doc:: include/linux/rculist.h
:external:
.. kernel-doc:: include/linux/rculist_nulls.h
:external:
.. kernel-doc:: include/linux/rcu_sync.h
:external:
.. kernel-doc:: kernel/rcu/sync.c
:external:
......@@ -594,7 +594,24 @@ between the address load and the data load:
This enforces the occurrence of one of the two implications, and prevents the
third possibility from arising.
A data-dependency barrier must also order against dependent writes:
[!] Note that this extremely counterintuitive situation arises most easily on
machines with split caches, so that, for example, one cache bank processes
even-numbered cache lines and the other bank processes odd-numbered cache
lines. The pointer P might be stored in an odd-numbered cache line, and the
variable B might be stored in an even-numbered cache line. Then, if the
even-numbered bank of the reading CPU's cache is extremely busy while the
odd-numbered bank is idle, one can see the new value of the pointer P (&B),
but the old value of the variable B (2).
A data-dependency barrier is not required to order dependent writes
because the CPUs that the Linux kernel supports don't do writes
until they are certain (1) that the write will actually happen, (2)
of the location of the write, and (3) of the value to be written.
But please carefully read the "CONTROL DEPENDENCIES" section and the
Documentation/RCU/rcu_dereference.txt file: The compiler can and does
break dependencies in a great many highly creative ways.
CPU 1 CPU 2
=============== ===============
......@@ -603,29 +620,19 @@ A data-dependency barrier must also order against dependent writes:
<write barrier>
WRITE_ONCE(P, &B);
Q = READ_ONCE(P);
<data dependency barrier>
*Q = 5;
WRITE_ONCE(*Q, 5);
The data-dependency barrier must order the read into Q with the store
into *Q. This prohibits this outcome:
Therefore, no data-dependency barrier is required to order the read into
Q with the store into *Q. In other words, this outcome is prohibited,
even without a data-dependency barrier:
(Q == &B) && (B == 4)
Please note that this pattern should be rare. After all, the whole point
of dependency ordering is to -prevent- writes to the data structure, along
with the expensive cache misses associated with those writes. This pattern
can be used to record rare error conditions and the like, and the ordering
prevents such records from being lost.
[!] Note that this extremely counterintuitive situation arises most easily on
machines with split caches, so that, for example, one cache bank processes
even-numbered cache lines and the other bank processes odd-numbered cache
lines. The pointer P might be stored in an odd-numbered cache line, and the
variable B might be stored in an even-numbered cache line. Then, if the
even-numbered bank of the reading CPU's cache is extremely busy while the
odd-numbered bank is idle, one can see the new value of the pointer P (&B),
but the old value of the variable B (2).
can be used to record rare error conditions and the like, and the CPUs'
naturally occurring ordering prevents such records from being lost.
The data dependency barrier is very important to the RCU system,
......
......@@ -8629,7 +8629,7 @@ M: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: kernel/membarrier.c
F: kernel/sched/membarrier.c
F: include/uapi/linux/membarrier.h
MEMORY MANAGEMENT
......
......@@ -16,11 +16,6 @@
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
#define arch_spin_is_locked(x) ((x)->lock != 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, !VAL);
}
static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
{
return lock.lock == 0;
......
......@@ -16,11 +16,6 @@
#define arch_spin_is_locked(x) ((x)->slock != __ARCH_SPIN_LOCK_UNLOCKED__)
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->slock, !VAL);
}
#ifdef CONFIG_ARC_HAS_LLSC
static inline void arch_spin_lock(arch_spinlock_t *lock)
......
......@@ -52,22 +52,6 @@ static inline void dsb_sev(void)
* memory.
*/
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
u16 owner = READ_ONCE(lock->tickets.owner);
for (;;) {
arch_spinlock_t tmp = READ_ONCE(*lock);
if (tmp.tickets.owner == tmp.tickets.next ||
tmp.tickets.owner != owner)
break;
wfe();
}
smp_acquire__after_ctrl_dep();
}
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_lock(arch_spinlock_t *lock)
......
......@@ -26,58 +26,6 @@
* The memory barriers are implicit with the load-acquire and store-release
* instructions.
*/
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
unsigned int tmp;
arch_spinlock_t lockval;
u32 owner;
/*
* Ensure prior spin_lock operations to other locks have completed
* on this CPU before we test whether "lock" is locked.
*/
smp_mb();
owner = READ_ONCE(lock->owner) << 16;
asm volatile(
" sevl\n"
"1: wfe\n"
"2: ldaxr %w0, %2\n"
/* Is the lock free? */
" eor %w1, %w0, %w0, ror #16\n"
" cbz %w1, 3f\n"
/* Lock taken -- has there been a subsequent unlock->lock transition? */
" eor %w1, %w3, %w0, lsl #16\n"
" cbz %w1, 1b\n"
/*
* The owner has been updated, so there was an unlock->lock
* transition that we missed. That means we can rely on the
* store-release of the unlock operation paired with the
* load-acquire of the lock operation to publish any of our
* previous stores to the new lock owner and therefore don't
* need to bother with the writeback below.
*/
" b 4f\n"
"3:\n"
/*
* Serialise against any concurrent lockers by writing back the
* unlocked lock value
*/
ARM64_LSE_ATOMIC_INSN(
/* LL/SC */
" stxr %w1, %w0, %2\n"
__nops(2),
/* LSE atomics */
" mov %w1, %w0\n"
" cas %w0, %w0, %2\n"
" eor %w1, %w1, %w0\n")
/* Somebody else wrote to the lock, GOTO 10 and reload the value */
" cbnz %w1, 2b\n"
"4:"
: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
: "r" (owner)
: "memory");
}
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
......@@ -176,7 +124,11 @@ static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
{
smp_mb(); /* See arch_spin_unlock_wait */
/*
* Ensure prior spin_lock operations to other locks have completed
* on this CPU before we test whether "lock" is locked.
*/
smp_mb(); /* ^^^ */
return !arch_spin_value_unlocked(READ_ONCE(*lock));
}
......
......@@ -360,6 +360,8 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
/*
* Complete any pending TLB or cache maintenance on this CPU in case
* the thread migrates to a different CPU.
* This full barrier is also required by the membarrier system
* call.
*/
dsb(ish);
......
......@@ -48,11 +48,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
__raw_spin_unlock_asm(&lock->lock);
}
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, !VAL);
}
static inline int arch_read_can_lock(arch_rwlock_t *rw)
{
return __raw_uncached_fetch_asm(&rw->lock) > 0;
......
......@@ -4,8 +4,6 @@
* Licensed under the GPL-2 or later
*/
#define pr_fmt(fmt) "module %s: " fmt, mod->name
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
......@@ -16,6 +14,11 @@
#include <asm/cacheflush.h>
#include <linux/uaccess.h>
#define mod_err(mod, fmt, ...) \
pr_err("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
#define mod_debug(mod, fmt, ...) \
pr_debug("module %s: " fmt, (mod)->name, ##__VA_ARGS__)
/* Transfer the section to the L1 memory */
int
module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
......@@ -44,7 +47,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_inst_sram_alloc(s->sh_size);
mod->arch.text_l1 = dest;
if (dest == NULL) {
pr_err("L1 inst memory allocation failed\n");
mod_err(mod, "L1 inst memory allocation failed\n");
return -1;
}
dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
......@@ -56,7 +59,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_sram_alloc(s->sh_size);
mod->arch.data_a_l1 = dest;
if (dest == NULL) {
pr_err("L1 data memory allocation failed\n");
mod_err(mod, "L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
......@@ -68,7 +71,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_sram_zalloc(s->sh_size);
mod->arch.bss_a_l1 = dest;
if (dest == NULL) {
pr_err("L1 data memory allocation failed\n");
mod_err(mod, "L1 data memory allocation failed\n");
return -1;
}
......@@ -77,7 +80,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.data_b_l1 = dest;
if (dest == NULL) {
pr_err("L1 data memory allocation failed\n");
mod_err(mod, "L1 data memory allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
......@@ -87,7 +90,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l1_data_B_sram_alloc(s->sh_size);
mod->arch.bss_b_l1 = dest;
if (dest == NULL) {
pr_err("L1 data memory allocation failed\n");
mod_err(mod, "L1 data memory allocation failed\n");
return -1;
}
memset(dest, 0, s->sh_size);
......@@ -99,7 +102,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_alloc(s->sh_size);
mod->arch.text_l2 = dest;
if (dest == NULL) {
pr_err("L2 SRAM allocation failed\n");
mod_err(mod, "L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
......@@ -111,7 +114,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_alloc(s->sh_size);
mod->arch.data_l2 = dest;
if (dest == NULL) {
pr_err("L2 SRAM allocation failed\n");
mod_err(mod, "L2 SRAM allocation failed\n");
return -1;
}
memcpy(dest, (void *)s->sh_addr, s->sh_size);
......@@ -123,7 +126,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
dest = l2_sram_zalloc(s->sh_size);
mod->arch.bss_l2 = dest;
if (dest == NULL) {
pr_err("L2 SRAM allocation failed\n");
mod_err(mod, "L2 SRAM allocation failed\n");
return -1;
}
......@@ -157,8 +160,8 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
Elf32_Sym *sym;
unsigned long location, value, size;
pr_debug("applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
mod_debug(mod, "applying relocate section %u to %u\n",
relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
......@@ -174,14 +177,14 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
#ifdef CONFIG_SMP
if (location >= COREB_L1_DATA_A_START) {
pr_err("cannot relocate in L1: %u (SMP kernel)\n",
mod_err(mod, "cannot relocate in L1: %u (SMP kernel)\n",
ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
#endif
pr_debug("location is %lx, value is %lx type is %d\n",
location, value, ELF32_R_TYPE(rel[i].r_info));
mod_debug(mod, "location is %lx, value is %lx type is %d\n",
location, value, ELF32_R_TYPE(rel[i].r_info));
switch (ELF32_R_TYPE(rel[i].r_info)) {
......@@ -200,12 +203,12 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
case R_BFIN_PCREL12_JUMP:
case R_BFIN_PCREL12_JUMP_S:
case R_BFIN_PCREL10:
pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
mod_err(mod, "unsupported relocation: %u (no -mlong-calls?)\n",
ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
default:
pr_err("unknown relocation: %u\n",
mod_err(mod, "unknown relocation: %u\n",
ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
......@@ -222,7 +225,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
isram_memcpy((void *)location, &value, size);
break;
default:
pr_err("invalid relocation for %#lx\n", location);
mod_err(mod, "invalid relocation for %#lx\n", location);
return -ENOEXEC;
}
}
......
......@@ -179,11 +179,6 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
*/
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, !VAL);
}
#define arch_spin_is_locked(x) ((x)->lock != 0)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
......
......@@ -76,22 +76,6 @@ static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
ACCESS_ONCE(*p) = (tmp + 2) & ~1;
}
static __always_inline void __ticket_spin_unlock_wait(arch_spinlock_t *lock)
{
int *p = (int *)&lock->lock, ticket;
ia64_invala();
for (;;) {
asm volatile ("ld4.c.nc %0=[%1]" : "=r"(ticket) : "r"(p) : "memory");
if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
return;
cpu_relax();
}
smp_acquire__after_ctrl_dep();
}
static inline int __ticket_spin_is_locked(arch_spinlock_t *lock)
{
long tmp = ACCESS_ONCE(lock->lock);
......@@ -143,11 +127,6 @@ static __always_inline void arch_spin_lock_flags(arch_spinlock_t *lock,
arch_spin_lock(lock);
}
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
__ticket_spin_unlock_wait(lock);
}
#define arch_read_can_lock(rw) (*(volatile int *)(rw) >= 0)
#define arch_write_can_lock(rw) (*(volatile int *)(rw) == 0)
......
......@@ -30,11 +30,6 @@
#define arch_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0)
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->slock, VAL > 0);
}
/**
* arch_spin_trylock - Try spin lock and return a result
* @lock: Pointer to the lock variable
......
......@@ -15,11 +15,6 @@
* locked.
*/
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, !VAL);
}
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
......
......@@ -26,11 +26,6 @@
#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->slock, !VAL);
}
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(
......
......@@ -14,13 +14,6 @@ static inline int arch_spin_is_locked(arch_spinlock_t *x)
#define arch_spin_lock(lock) arch_spin_lock_flags(lock, 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *x)
{
volatile unsigned int *a = __ldcw_align(x);
smp_cond_load_acquire(a, VAL);
}
static inline void arch_spin_lock_flags(arch_spinlock_t *x,
unsigned long flags)
{
......
......@@ -170,39 +170,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
lock->slock = 0;
}
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
arch_spinlock_t lock_val;
smp_mb();
/*
* Atomically load and store back the lock value (unchanged). This
* ensures that our observation of the lock value is ordered with
* respect to other lock operations.
*/
__asm__ __volatile__(
"1: " PPC_LWARX(%0, 0, %2, 0) "\n"
" stwcx. %0, 0, %2\n"
" bne- 1b\n"
: "=&r" (lock_val), "+m" (*lock)
: "r" (lock)
: "cr0", "xer");
if (arch_spin_value_unlocked(lock_val))
goto out;
while (lock->slock) {
HMT_low();
if (SHARED_PROCESSOR)
__spin_yield(lock);
}
HMT_medium();
out:
smp_mb();
}
/*
* Read-write spinlocks, allowing multiple readers
* but only one writer.
......
......@@ -98,13 +98,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lp)
: "cc", "memory");
}
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
while (arch_spin_is_locked(lock))
arch_spin_relax(lock);
smp_acquire__after_ctrl_dep();
}
/*
* Read-write spinlocks, allowing multiple readers
* but only one writer.
......
......@@ -29,11 +29,6 @@ static inline unsigned __sl_cas(volatile unsigned *p, unsigned old, unsigned new
#define arch_spin_is_locked(x) ((x)->lock <= 0)
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, VAL > 0);
}
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
while (!__sl_cas(&lock->lock, 1, 0));
......
......@@ -21,11 +21,6 @@
#define arch_spin_is_locked(x) ((x)->lock <= 0)
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, VAL > 0);
}
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
......
......@@ -14,11 +14,6 @@
#define arch_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->lock, !VAL);
}
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
__asm__ __volatile__(
......
......@@ -64,8 +64,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
lock->current_ticket = old_ticket + TICKET_QUANTUM;
}
void arch_spin_unlock_wait(arch_spinlock_t *lock);
/*
* Read-write spinlocks, allowing multiple readers
* but only one writer.
......
......@@ -58,8 +58,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
__insn_fetchadd4(&lock->lock, 1U << __ARCH_SPIN_CURRENT_SHIFT);
}
void arch_spin_unlock_wait(arch_spinlock_t *lock);
void arch_spin_lock_slow(arch_spinlock_t *lock, u32 val);
/* Grab the "next" ticket number and bump it atomically.
......
......@@ -62,29 +62,6 @@ int arch_spin_trylock(arch_spinlock_t *lock)
}
EXPORT_SYMBOL(arch_spin_trylock);
void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
u32 iterations = 0;
int curr = READ_ONCE(lock->current_ticket);
int next = READ_ONCE(lock->next_ticket);
/* Return immediately if unlocked. */
if (next == curr)
return;
/* Wait until the current locker has released the lock. */
do {
delay_backoff(iterations++);
} while (READ_ONCE(lock->current_ticket) == curr);
/*
* The TILE architecture doesn't do read speculation; therefore
* a control dependency guarantees a LOAD->{LOAD,STORE} order.
*/
barrier();
}
EXPORT_SYMBOL(arch_spin_unlock_wait);
/*
* The low byte is always reserved to be the marker for a "tns" operation
* since the low bit is set to "1" by a tns. The next seven bits are
......
......@@ -62,28 +62,6 @@ int arch_spin_trylock(arch_spinlock_t *lock)
}
EXPORT_SYMBOL(arch_spin_trylock);
void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
u32 iterations = 0;
u32 val = READ_ONCE(lock->lock);
u32 curr = arch_spin_current(val);
/* Return immediately if unlocked. */
if (arch_spin_next(val) == curr)
return;
/* Wait until the current locker has released the lock. */
do {
delay_backoff(iterations++);
} while (arch_spin_current(READ_ONCE(lock->lock)) == curr);
/*
* The TILE architecture doesn't do read speculation; therefore
* a control dependency guarantees a LOAD->{LOAD,STORE} order.
*/
barrier();
}
EXPORT_SYMBOL(arch_spin_unlock_wait);
/*
* If the read lock fails due to a writer, we retry periodically
......
......@@ -33,11 +33,6 @@
#define arch_spin_is_locked(x) ((x)->slock != 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->slock, !VAL);
}
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline void arch_spin_lock(arch_spinlock_t *lock)
......
......@@ -645,12 +645,11 @@ void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
* completions are honored. A scmd is determined to have
* timed out iff its associated qc is active and not failed.
*/
spin_lock_irqsave(ap->lock, flags);
if (ap->ops->error_handler) {
struct scsi_cmnd *scmd, *tmp;
int nr_timedout = 0;
spin_lock_irqsave(ap->lock, flags);
/* This must occur under the ap->lock as we don't want
a polled recovery to race the real interrupt handler
......@@ -700,12 +699,11 @@ void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
if (nr_timedout)
__ata_port_freeze(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* initialize eh_tries */
ap->eh_tries = ATA_EH_MAX_TRIES;
} else
spin_unlock_wait(ap->lock);
}
spin_unlock_irqrestore(ap->lock, flags);
}
EXPORT_SYMBOL(ata_scsi_cmd_error_handler);
......
......@@ -21,17 +21,6 @@
#include <asm-generic/qspinlock_types.h>
/**
* queued_spin_unlock_wait - wait until the _current_ lock holder releases the lock
* @lock : Pointer to queued spinlock structure
*
* There is a very slight possibility of live-lock if the lockers keep coming
* and the waiter is just unfortunate enough to not see any unlock state.
*/
#ifndef queued_spin_unlock_wait
extern void queued_spin_unlock_wait(struct qspinlock *lock);
#endif
/**
* queued_spin_is_locked - is the spinlock locked?
* @lock: Pointer to queued spinlock structure
......@@ -41,8 +30,6 @@ extern void queued_spin_unlock_wait(struct qspinlock *lock);
static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
{
/*
* See queued_spin_unlock_wait().
*
* Any !0 state indicates it is locked, even if _Q_LOCKED_VAL
* isn't immediately observable.
*/
......@@ -135,6 +122,5 @@ static __always_inline bool virt_spin_lock(struct qspinlock *lock)
#define arch_spin_trylock(l) queued_spin_trylock(l)
#define arch_spin_unlock(l) queued_spin_unlock(l)
#define arch_spin_lock_flags(l, f) queued_spin_lock(l)
#define arch_spin_unlock_wait(l) queued_spin_unlock_wait(l)
#endif /* __ASM_GENERIC_QSPINLOCK_H */
......@@ -125,18 +125,12 @@ extern struct group_info init_groups;
#define INIT_IDS
#endif
#ifdef CONFIG_PREEMPT_RCU
#define INIT_TASK_RCU_TREE_PREEMPT() \
.rcu_blocked_node = NULL,
#else
#define INIT_TASK_RCU_TREE_PREEMPT(tsk)
#endif
#ifdef CONFIG_PREEMPT_RCU
#define INIT_TASK_RCU_PREEMPT(tsk) \
.rcu_read_lock_nesting = 0, \
.rcu_read_unlock_special.s = 0, \
.rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry), \
INIT_TASK_RCU_TREE_PREEMPT()
.rcu_blocked_node = NULL,
#else
#define INIT_TASK_RCU_PREEMPT(tsk)
#endif
......
......@@ -58,8 +58,6 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func);
void call_rcu_bh(struct rcu_head *head, rcu_callback_t func);
void call_rcu_sched(struct rcu_head *head, rcu_callback_t func);
void synchronize_sched(void);
void call_rcu_tasks(struct rcu_head *head, rcu_callback_t func);
void synchronize_rcu_tasks(void);
void rcu_barrier_tasks(void);
#ifdef CONFIG_PREEMPT_RCU
......@@ -105,6 +103,7 @@ static inline int rcu_preempt_depth(void)
/* Internal to kernel */
void rcu_init(void);
extern int rcu_scheduler_active __read_mostly;
void rcu_sched_qs(void);
void rcu_bh_qs(void);
void rcu_check_callbacks(int user);
......@@ -165,8 +164,6 @@ static inline void rcu_init_nohz(void) { }
* macro rather than an inline function to avoid #include hell.
*/
#ifdef CONFIG_TASKS_RCU
#define TASKS_RCU(x) x
extern struct srcu_struct tasks_rcu_exit_srcu;
#define rcu_note_voluntary_context_switch_lite(t) \
do { \
if (READ_ONCE((t)->rcu_tasks_holdout)) \
......@@ -177,10 +174,17 @@ extern struct srcu_struct tasks_rcu_exit_srcu;
rcu_all_qs(); \
rcu_note_voluntary_context_switch_lite(t); \
} while (0)
void call_rcu_tasks(struct rcu_head *head, rcu_callback_t func);
void synchronize_rcu_tasks(void);
void exit_tasks_rcu_start(void);
void exit_tasks_rcu_finish(void);
#else /* #ifdef CONFIG_TASKS_RCU */
#define TASKS_RCU(x) do { } while (0)
#define rcu_note_voluntary_context_switch_lite(t) do { } while (0)
#define rcu_note_voluntary_context_switch(t) rcu_all_qs()
#define call_rcu_tasks call_rcu_sched
#define synchronize_rcu_tasks synchronize_sched
static inline void exit_tasks_rcu_start(void) { }
static inline void exit_tasks_rcu_finish(void) { }
#endif /* #else #ifdef CONFIG_TASKS_RCU */
/**
......
......@@ -116,13 +116,11 @@ static inline void rcu_irq_exit_irqson(void) { }
static inline void rcu_irq_enter_irqson(void) { }
static inline void rcu_irq_exit(void) { }
static inline void exit_rcu(void) { }
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU)
extern int rcu_scheduler_active __read_mostly;
#ifdef CONFIG_SRCU
void rcu_scheduler_starting(void);
#else /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU) */
#else /* #ifndef CONFIG_SRCU */
static inline void rcu_scheduler_starting(void) { }
#endif /* #else #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU) */
#endif /* #else #ifndef CONFIG_SRCU */
static inline void rcu_end_inkernel_boot(void) { }
static inline bool rcu_is_watching(void) { return true; }
......
......@@ -589,9 +589,10 @@ struct task_struct {
#ifdef CONFIG_TASKS_RCU
unsigned long rcu_tasks_nvcsw;
bool rcu_tasks_holdout;
struct list_head rcu_tasks_holdout_list;
u8 rcu_tasks_holdout;
u8 rcu_tasks_idx;
int rcu_tasks_idle_cpu;
struct list_head rcu_tasks_holdout_list;
#endif /* #ifdef CONFIG_TASKS_RCU */
struct sched_info sched_info;
......
......@@ -130,12 +130,6 @@ do { \
#define smp_mb__before_spinlock() smp_wmb()
#endif
/**
* raw_spin_unlock_wait - wait until the spinlock gets unlocked
* @lock: the spinlock in question.
*/
#define raw_spin_unlock_wait(lock) arch_spin_unlock_wait(&(lock)->raw_lock)
#ifdef CONFIG_DEBUG_SPINLOCK
extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock);
#define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock)
......@@ -369,31 +363,6 @@ static __always_inline int spin_trylock_irq(spinlock_t *lock)
raw_spin_trylock_irqsave(spinlock_check(lock), flags); \
})
/**
* spin_unlock_wait - Interpose between successive critical sections
* @lock: the spinlock whose critical sections are to be interposed.
*
* Semantically this is equivalent to a spin_lock() immediately
* followed by a spin_unlock(). However, most architectures have
* more efficient implementations in which the spin_unlock_wait()
* cannot block concurrent lock acquisition, and in some cases
* where spin_unlock_wait() does not write to the lock variable.
* Nevertheless, spin_unlock_wait() can have high overhead, so if
* you feel the need to use it, please check to see if there is
* a better way to get your job done.
*
* The ordering guarantees provided by spin_unlock_wait() are:
*
* 1. All accesses preceding the spin_unlock_wait() happen before
* any accesses in later critical sections for this same lock.
* 2. All accesses following the spin_unlock_wait() happen after
* any accesses in earlier critical sections for this same lock.
*/
static __always_inline void spin_unlock_wait(spinlock_t *lock)
{
raw_spin_unlock_wait(&lock->rlock);
}
static __always_inline int spin_is_locked(spinlock_t *lock)
{
return raw_spin_is_locked(&lock->rlock);
......
......@@ -26,11 +26,6 @@
#ifdef CONFIG_DEBUG_SPINLOCK
#define arch_spin_is_locked(x) ((x)->slock == 0)
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
smp_cond_load_acquire(&lock->slock, VAL);
}
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
lock->slock = 0;
......@@ -73,7 +68,6 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
#else /* DEBUG_SPINLOCK */
#define arch_spin_is_locked(lock) ((void)(lock), 0)
#define arch_spin_unlock_wait(lock) do { barrier(); (void)(lock); } while (0)
/* for sched/core.c and kernel_lock.c: */
# define arch_spin_lock(lock) do { barrier(); (void)(lock); } while (0)
# define arch_spin_lock_flags(lock, flags) do { barrier(); (void)(lock); } while (0)
......
......@@ -87,4 +87,17 @@ static inline void srcu_barrier(struct srcu_struct *sp)
synchronize_srcu(sp);
}
/* Defined here to avoid size increase for non-torture kernels. */
static inline void srcu_torture_stats_print(struct srcu_struct *sp,
char *tt, char *tf)
{
int idx;
idx = READ_ONCE(sp->srcu_idx) & 0x1;
pr_alert("%s%s Tiny SRCU per-CPU(idx=%d): (%hd,%hd)\n",
tt, tf, idx,
READ_ONCE(sp->srcu_lock_nesting[!idx]),
READ_ONCE(sp->srcu_lock_nesting[idx]));
}
#endif
......@@ -104,8 +104,6 @@ struct srcu_struct {
#define SRCU_STATE_SCAN1 1
#define SRCU_STATE_SCAN2 2
void process_srcu(struct work_struct *work);
#define __SRCU_STRUCT_INIT(name) \
{ \
.sda = &name##_srcu_data, \
......@@ -141,5 +139,6 @@ void process_srcu(struct work_struct *work);
void synchronize_srcu_expedited(struct srcu_struct *sp);
void srcu_barrier(struct srcu_struct *sp);
void srcu_torture_stats_print(struct srcu_struct *sp, char *tt, char *tf);
#endif
......@@ -169,4 +169,59 @@ do { \
__ret; \
})
#define __swait_event_idle(wq, condition) \
(void)___swait_event(wq, condition, TASK_IDLE, 0, schedule())
/**
* swait_event_idle - wait without system load contribution
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_IDLE) until the @condition evaluates to
* true. The @condition is checked each time the waitqueue @wq is woken up.
*
* This function is mostly used when a kthread or workqueue waits for some
* condition and doesn't want to contribute to system load. Signals are
* ignored.
*/
#define swait_event_idle(wq, condition) \
do { \
if (condition) \
break; \
__swait_event_idle(wq, condition); \
} while (0)
#define __swait_event_idle_timeout(wq, condition, timeout) \
___swait_event(wq, ___wait_cond_timeout(condition), \
TASK_IDLE, timeout, \
__ret = schedule_timeout(__ret))
/**
* swait_event_idle_timeout - wait up to timeout without load contribution
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout at which we'll give up in jiffies
*
* The process is put to sleep (TASK_IDLE) until the @condition evaluates to
* true. The @condition is checked each time the waitqueue @wq is woken up.
*
* This function is mostly used when a kthread or workqueue waits for some
* condition and doesn't want to contribute to system load. Signals are
* ignored.
*
* Returns:
* 0 if the @condition evaluated to %false after the @timeout elapsed,
* 1 if the @condition evaluated to %true after the @timeout elapsed,
* or the remaining jiffies (at least 1) if the @condition evaluated
* to %true before the @timeout elapsed.
*/
#define swait_event_idle_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
if (!___wait_cond_timeout(condition)) \
__ret = __swait_event_idle_timeout(wq, \
condition, timeout); \
__ret; \
})
#endif /* _LINUX_SWAIT_H */
......@@ -703,6 +703,7 @@ TRACE_EVENT(rcu_batch_end,
* at the beginning and end of the read, respectively. Note that the
* callback address can be NULL.
*/
#define RCUTORTURENAME_LEN 8
TRACE_EVENT(rcu_torture_read,
TP_PROTO(const char *rcutorturename, struct rcu_head *rhp,
......@@ -711,7 +712,7 @@ TRACE_EVENT(rcu_torture_read,
TP_ARGS(rcutorturename, rhp, secs, c_old, c),
TP_STRUCT__entry(
__field(const char *, rcutorturename)
__field(char, rcutorturename[RCUTORTURENAME_LEN])
__field(struct rcu_head *, rhp)
__field(unsigned long, secs)
__field(unsigned long, c_old)
......@@ -719,7 +720,9 @@ TRACE_EVENT(rcu_torture_read,
),
TP_fast_assign(
__entry->rcutorturename = rcutorturename;
strncpy(__entry->rcutorturename, rcutorturename,
RCUTORTURENAME_LEN);
__entry->rcutorturename[RCUTORTURENAME_LEN - 1] = 0;
__entry->rhp = rhp;
__entry->secs = secs;
__entry->c_old = c_old;
......
......@@ -40,14 +40,33 @@
* (non-running threads are de facto in such a
* state). This covers threads from all processes
* running on the system. This command returns 0.
* @MEMBARRIER_CMD_PRIVATE_EXPEDITED:
* Execute a memory barrier on each running
* thread belonging to the same process as the current
* thread. Upon return from system call, the
* caller thread is ensured that all its running
* threads siblings have passed through a state
* where all memory accesses to user-space
* addresses match program order between entry
* to and return from the system call
* (non-running threads are de facto in such a
* state). This only covers threads from the
* same processes as the caller thread. This
* command returns 0. The "expedited" commands
* complete faster than the non-expedited ones,
* they never block, but have the downside of
* causing extra overhead.
*
* Command to be passed to the membarrier system call. The commands need to
* be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to
* the value 0.
*/
enum membarrier_cmd {
MEMBARRIER_CMD_QUERY = 0,
MEMBARRIER_CMD_SHARED = (1 << 0),
MEMBARRIER_CMD_QUERY = 0,
MEMBARRIER_CMD_SHARED = (1 << 0),
/* reserved for MEMBARRIER_CMD_SHARED_EXPEDITED (1 << 1) */
/* reserved for MEMBARRIER_CMD_PRIVATE (1 << 2) */
MEMBARRIER_CMD_PRIVATE_EXPEDITED = (1 << 3),
};
#endif /* _UAPI_LINUX_MEMBARRIER_H */
......@@ -2091,7 +2091,8 @@ void exit_sem(struct task_struct *tsk)
* possibility where we exit while freeary() didn't
* finish unlocking sem_undo_list.
*/
spin_unlock_wait(&ulp->lock);
spin_lock(&ulp->lock);
spin_unlock(&ulp->lock);
rcu_read_unlock();
break;
}
......
......@@ -108,7 +108,6 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
obj-$(CONFIG_TORTURE_TEST) += torture.o
obj-$(CONFIG_MEMBARRIER) += membarrier.o
obj-$(CONFIG_HAS_IOMEM) += memremap.o
......
......@@ -764,7 +764,6 @@ void __noreturn do_exit(long code)
{
struct task_struct *tsk = current;
int group_dead;
TASKS_RCU(int tasks_rcu_i);
profile_task_exit(tsk);
kcov_task_exit(tsk);
......@@ -819,7 +818,8 @@ void __noreturn do_exit(long code)
* Ensure that we must observe the pi_state in exit_mm() ->
* mm_release() -> exit_pi_state_list().
*/
raw_spin_unlock_wait(&tsk->pi_lock);
raw_spin_lock_irq(&tsk->pi_lock);
raw_spin_unlock_irq(&tsk->pi_lock);
if (unlikely(in_atomic())) {
pr_info("note: %s[%d] exited with preempt_count %d\n",
......@@ -881,9 +881,7 @@ void __noreturn do_exit(long code)
*/
flush_ptrace_hw_breakpoint(tsk);
TASKS_RCU(preempt_disable());
TASKS_RCU(tasks_rcu_i = __srcu_read_lock(&tasks_rcu_exit_srcu));
TASKS_RCU(preempt_enable());
exit_tasks_rcu_start();
exit_notify(tsk, group_dead);
proc_exit_connector(tsk);
mpol_put_task_policy(tsk);
......@@ -918,7 +916,7 @@ void __noreturn do_exit(long code)
if (tsk->nr_dirtied)
__this_cpu_add(dirty_throttle_leaks, tsk->nr_dirtied);
exit_rcu();
TASKS_RCU(__srcu_read_unlock(&tasks_rcu_exit_srcu, tasks_rcu_i));
exit_tasks_rcu_finish();
do_task_dead();
}
......
......@@ -268,123 +268,6 @@ static __always_inline u32 __pv_wait_head_or_lock(struct qspinlock *lock,
#define queued_spin_lock_slowpath native_queued_spin_lock_slowpath
#endif
/*
* Various notes on spin_is_locked() and spin_unlock_wait(), which are
* 'interesting' functions:
*
* PROBLEM: some architectures have an interesting issue with atomic ACQUIRE
* operations in that the ACQUIRE applies to the LOAD _not_ the STORE (ARM64,
* PPC). Also qspinlock has a similar issue per construction, the setting of
* the locked byte can be unordered acquiring the lock proper.
*
* This gets to be 'interesting' in the following cases, where the /should/s
* end up false because of this issue.
*
*
* CASE 1:
*
* So the spin_is_locked() correctness issue comes from something like:
*
* CPU0 CPU1
*
* global_lock(); local_lock(i)
* spin_lock(&G) spin_lock(&L[i])
* for (i) if (!spin_is_locked(&G)) {
* spin_unlock_wait(&L[i]); smp_acquire__after_ctrl_dep();
* return;
* }
* // deal with fail
*
* Where it is important CPU1 sees G locked or CPU0 sees L[i] locked such
* that there is exclusion between the two critical sections.
*
* The load from spin_is_locked(&G) /should/ be constrained by the ACQUIRE from
* spin_lock(&L[i]), and similarly the load(s) from spin_unlock_wait(&L[i])
* /should/ be constrained by the ACQUIRE from spin_lock(&G).
*
* Similarly, later stuff is constrained by the ACQUIRE from CTRL+RMB.
*
*
* CASE 2:
*
* For spin_unlock_wait() there is a second correctness issue, namely:
*
* CPU0 CPU1
*
* flag = set;
* smp_mb(); spin_lock(&l)
* spin_unlock_wait(&l); if (!flag)
* // add to lockless list
* spin_unlock(&l);
* // iterate lockless list
*
* Which wants to ensure that CPU1 will stop adding bits to the list and CPU0
* will observe the last entry on the list (if spin_unlock_wait() had ACQUIRE
* semantics etc..)
*
* Where flag /should/ be ordered against the locked store of l.
*/
/*
* queued_spin_lock_slowpath() can (load-)ACQUIRE the lock before
* issuing an _unordered_ store to set _Q_LOCKED_VAL.
*
* This means that the store can be delayed, but no later than the
* store-release from the unlock. This means that simply observing
* _Q_LOCKED_VAL is not sufficient to determine if the lock is acquired.
*
* There are two paths that can issue the unordered store:
*
* (1) clear_pending_set_locked(): *,1,0 -> *,0,1
*
* (2) set_locked(): t,0,0 -> t,0,1 ; t != 0
* atomic_cmpxchg_relaxed(): t,0,0 -> 0,0,1
*
* However, in both cases we have other !0 state we've set before to queue
* ourseves:
*
* For (1) we have the atomic_cmpxchg_acquire() that set _Q_PENDING_VAL, our
* load is constrained by that ACQUIRE to not pass before that, and thus must
* observe the store.
*
* For (2) we have a more intersting scenario. We enqueue ourselves using
* xchg_tail(), which ends up being a RELEASE. This in itself is not
* sufficient, however that is followed by an smp_cond_acquire() on the same
* word, giving a RELEASE->ACQUIRE ordering. This again constrains our load and
* guarantees we must observe that store.
*
* Therefore both cases have other !0 state that is observable before the
* unordered locked byte store comes through. This means we can use that to
* wait for the lock store, and then wait for an unlock.
*/
#ifndef queued_spin_unlock_wait
void queued_spin_unlock_wait(struct qspinlock *lock)
{
u32 val;
for (;;) {
val = atomic_read(&lock->val);
if (!val) /* not locked, we're done */
goto done;
if (val & _Q_LOCKED_MASK) /* locked, go wait for unlock */
break;
/* not locked, but pending, wait until we observe the lock */
cpu_relax();
}
/* any unlock is good */
while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
cpu_relax();
done:
smp_acquire__after_ctrl_dep();
}
EXPORT_SYMBOL(queued_spin_unlock_wait);
#endif
#endif /* _GEN_PV_LOCK_SLOWPATH */
/**
......
......@@ -69,8 +69,7 @@ config TREE_SRCU
This option selects the full-fledged version of SRCU.
config TASKS_RCU
bool
default n
def_bool PREEMPT
select SRCU
help
This option enables a task-based RCU implementation that uses
......
......@@ -356,22 +356,10 @@ do { \
#ifdef CONFIG_TINY_RCU
/* Tiny RCU doesn't expedite, as its purpose in life is instead to be tiny. */
static inline bool rcu_gp_is_normal(void) /* Internal RCU use. */
{
return true;
}
static inline bool rcu_gp_is_expedited(void) /* Internal RCU use. */
{
return false;
}
static inline void rcu_expedite_gp(void)
{
}
static inline void rcu_unexpedite_gp(void)
{
}
static inline bool rcu_gp_is_normal(void) { return true; }
static inline bool rcu_gp_is_expedited(void) { return false; }
static inline void rcu_expedite_gp(void) { }
static inline void rcu_unexpedite_gp(void) { }
#else /* #ifdef CONFIG_TINY_RCU */
bool rcu_gp_is_normal(void); /* Internal RCU use. */
bool rcu_gp_is_expedited(void); /* Internal RCU use. */
......@@ -419,12 +407,8 @@ static inline void rcutorture_get_gp_data(enum rcutorture_type test_type,
*gpnum = 0;
*completed = 0;
}
static inline void rcutorture_record_test_transition(void)
{
}
static inline void rcutorture_record_progress(unsigned long vernum)
{
}
static inline void rcutorture_record_test_transition(void) { }
static inline void rcutorture_record_progress(unsigned long vernum) { }
#ifdef CONFIG_RCU_TRACE
void do_trace_rcu_torture_read(const char *rcutorturename,
struct rcu_head *rhp,
......@@ -460,92 +444,20 @@ void srcutorture_get_gp_data(enum rcutorture_type test_type,
#endif
#ifdef CONFIG_TINY_RCU
/*
* Return the number of grace periods started.
*/
static inline unsigned long rcu_batches_started(void)
{
return 0;
}
/*
* Return the number of bottom-half grace periods started.
*/
static inline unsigned long rcu_batches_started_bh(void)
{
return 0;
}
/*
* Return the number of sched grace periods started.
*/
static inline unsigned long rcu_batches_started_sched(void)
{
return 0;
}
/*
* Return the number of grace periods completed.
*/
static inline unsigned long rcu_batches_completed(void)
{
return 0;
}
/*
* Return the number of bottom-half grace periods completed.
*/
static inline unsigned long rcu_batches_completed_bh(void)
{
return 0;
}
/*
* Return the number of sched grace periods completed.
*/
static inline unsigned long rcu_batches_completed_sched(void)
{
return 0;
}
/*
* Return the number of expedited grace periods completed.
*/
static inline unsigned long rcu_exp_batches_completed(void)
{
return 0;
}
/*
* Return the number of expedited sched grace periods completed.
*/
static inline unsigned long rcu_exp_batches_completed_sched(void)
{
return 0;
}
static inline unsigned long srcu_batches_completed(struct srcu_struct *sp)
{
return 0;
}
static inline void rcu_force_quiescent_state(void)
{
}
static inline void rcu_bh_force_quiescent_state(void)
{
}
static inline void rcu_sched_force_quiescent_state(void)
{
}
static inline void show_rcu_gp_kthreads(void)
{
}
static inline unsigned long rcu_batches_started(void) { return 0; }
static inline unsigned long rcu_batches_started_bh(void) { return 0; }
static inline unsigned long rcu_batches_started_sched(void) { return 0; }
static inline unsigned long rcu_batches_completed(void) { return 0; }
static inline unsigned long rcu_batches_completed_bh(void) { return 0; }
static inline unsigned long rcu_batches_completed_sched(void) { return 0; }
static inline unsigned long rcu_exp_batches_completed(void) { return 0; }
static inline unsigned long rcu_exp_batches_completed_sched(void) { return 0; }
static inline unsigned long
srcu_batches_completed(struct srcu_struct *sp) { return 0; }
static inline void rcu_force_quiescent_state(void) { }
static inline void rcu_bh_force_quiescent_state(void) { }
static inline void rcu_sched_force_quiescent_state(void) { }
static inline void show_rcu_gp_kthreads(void) { }
#else /* #ifdef CONFIG_TINY_RCU */
extern unsigned long rcutorture_testseq;
extern unsigned long rcutorture_vernum;
......
......@@ -35,24 +35,6 @@ void rcu_cblist_init(struct rcu_cblist *rclp)
rclp->len_lazy = 0;
}
/*
* Debug function to actually count the number of callbacks.
* If the number exceeds the limit specified, return -1.
*/
long rcu_cblist_count_cbs(struct rcu_cblist *rclp, long lim)
{
int cnt = 0;
struct rcu_head **rhpp = &rclp->head;
for (;;) {
if (!*rhpp)
return cnt;
if (++cnt > lim)
return -1;
rhpp = &(*rhpp)->next;
}
}
/*
* Dequeue the oldest rcu_head structure from the specified callback
* list. This function assumes that the callback is non-lazy, but
......@@ -102,17 +84,6 @@ void rcu_segcblist_disable(struct rcu_segcblist *rsclp)
rsclp->tails[RCU_NEXT_TAIL] = NULL;
}
/*
* Is the specified segment of the specified rcu_segcblist structure
* empty of callbacks?
*/
bool rcu_segcblist_segempty(struct rcu_segcblist *rsclp, int seg)
{
if (seg == RCU_DONE_TAIL)
return &rsclp->head == rsclp->tails[RCU_DONE_TAIL];
return rsclp->tails[seg - 1] == rsclp->tails[seg];
}
/*
* Does the specified rcu_segcblist structure contain callbacks that
* are ready to be invoked?
......@@ -133,50 +104,6 @@ bool rcu_segcblist_pend_cbs(struct rcu_segcblist *rsclp)
!rcu_segcblist_restempty(rsclp, RCU_DONE_TAIL);
}
/*
* Dequeue and return the first ready-to-invoke callback. If there
* are no ready-to-invoke callbacks, return NULL. Disables interrupts
* to avoid interference. Does not protect from interference from other
* CPUs or tasks.
*/
struct rcu_head *rcu_segcblist_dequeue(struct rcu_segcblist *rsclp)
{
unsigned long flags;
int i;
struct rcu_head *rhp;
local_irq_save(flags);
if (!rcu_segcblist_ready_cbs(rsclp)) {
local_irq_restore(flags);
return NULL;
}
rhp = rsclp->head;
BUG_ON(!rhp);
rsclp->head = rhp->next;
for (i = RCU_DONE_TAIL; i < RCU_CBLIST_NSEGS; i++) {
if (rsclp->tails[i] != &rhp->next)
break;
rsclp->tails[i] = &rsclp->head;
}
smp_mb(); /* Dequeue before decrement for rcu_barrier(). */
WRITE_ONCE(rsclp->len, rsclp->len - 1);
local_irq_restore(flags);
return rhp;
}
/*
* Account for the fact that a previously dequeued callback turned out
* to be marked as lazy.
*/
void rcu_segcblist_dequeued_lazy(struct rcu_segcblist *rsclp)
{
unsigned long flags;
local_irq_save(flags);
rsclp->len_lazy--;
local_irq_restore(flags);
}
/*
* Return a pointer to the first callback in the specified rcu_segcblist
* structure. This is useful for diagnostics.
......@@ -202,17 +129,6 @@ struct rcu_head *rcu_segcblist_first_pend_cb(struct rcu_segcblist *rsclp)
return NULL;
}
/*
* Does the specified rcu_segcblist structure contain callbacks that
* have not yet been processed beyond having been posted, that is,
* does it contain callbacks in its last segment?
*/
bool rcu_segcblist_new_cbs(struct rcu_segcblist *rsclp)
{
return rcu_segcblist_is_enabled(rsclp) &&
!rcu_segcblist_restempty(rsclp, RCU_NEXT_READY_TAIL);
}
/*
* Enqueue the specified callback onto the specified rcu_segcblist
* structure, updating accounting as needed. Note that the ->len
......@@ -503,3 +419,27 @@ bool rcu_segcblist_future_gp_needed(struct rcu_segcblist *rsclp,
return true;
return false;
}
/*
* Merge the source rcu_segcblist structure into the destination
* rcu_segcblist structure, then initialize the source. Any pending
* callbacks from the source get to start over. It is best to
* advance and accelerate both the destination and the source
* before merging.
*/
void rcu_segcblist_merge(struct rcu_segcblist *dst_rsclp,
struct rcu_segcblist *src_rsclp)
{
struct rcu_cblist donecbs;
struct rcu_cblist pendcbs;
rcu_cblist_init(&donecbs);
rcu_cblist_init(&pendcbs);
rcu_segcblist_extract_count(src_rsclp, &donecbs);
rcu_segcblist_extract_done_cbs(src_rsclp, &donecbs);
rcu_segcblist_extract_pend_cbs(src_rsclp, &pendcbs);
rcu_segcblist_insert_count(dst_rsclp, &donecbs);
rcu_segcblist_insert_done_cbs(dst_rsclp, &donecbs);
rcu_segcblist_insert_pend_cbs(dst_rsclp, &pendcbs);
rcu_segcblist_init(src_rsclp);
}
......@@ -31,29 +31,7 @@ static inline void rcu_cblist_dequeued_lazy(struct rcu_cblist *rclp)
rclp->len_lazy--;
}
/*
* Interim function to return rcu_cblist head pointer. Longer term, the
* rcu_cblist will be used more pervasively, removing the need for this
* function.
*/
static inline struct rcu_head *rcu_cblist_head(struct rcu_cblist *rclp)
{
return rclp->head;
}
/*
* Interim function to return rcu_cblist head pointer. Longer term, the
* rcu_cblist will be used more pervasively, removing the need for this
* function.
*/
static inline struct rcu_head **rcu_cblist_tail(struct rcu_cblist *rclp)
{
WARN_ON_ONCE(!rclp->head);
return rclp->tail;
}
void rcu_cblist_init(struct rcu_cblist *rclp);
long rcu_cblist_count_cbs(struct rcu_cblist *rclp, long lim);
struct rcu_head *rcu_cblist_dequeue(struct rcu_cblist *rclp);
/*
......@@ -134,14 +112,10 @@ static inline struct rcu_head **rcu_segcblist_tail(struct rcu_segcblist *rsclp)
void rcu_segcblist_init(struct rcu_segcblist *rsclp);
void rcu_segcblist_disable(struct rcu_segcblist *rsclp);
bool rcu_segcblist_segempty(struct rcu_segcblist *rsclp, int seg);
bool rcu_segcblist_ready_cbs(struct rcu_segcblist *rsclp);
bool rcu_segcblist_pend_cbs(struct rcu_segcblist *rsclp);
struct rcu_head *rcu_segcblist_dequeue(struct rcu_segcblist *rsclp);
void rcu_segcblist_dequeued_lazy(struct rcu_segcblist *rsclp);
struct rcu_head *rcu_segcblist_first_cb(struct rcu_segcblist *rsclp);
struct rcu_head *rcu_segcblist_first_pend_cb(struct rcu_segcblist *rsclp);
bool rcu_segcblist_new_cbs(struct rcu_segcblist *rsclp);
void rcu_segcblist_enqueue(struct rcu_segcblist *rsclp,
struct rcu_head *rhp, bool lazy);
bool rcu_segcblist_entrain(struct rcu_segcblist *rsclp,
......@@ -162,3 +136,5 @@ void rcu_segcblist_advance(struct rcu_segcblist *rsclp, unsigned long seq);
bool rcu_segcblist_accelerate(struct rcu_segcblist *rsclp, unsigned long seq);
bool rcu_segcblist_future_gp_needed(struct rcu_segcblist *rsclp,
unsigned long seq);
void rcu_segcblist_merge(struct rcu_segcblist *dst_rsclp,
struct rcu_segcblist *src_rsclp);
......@@ -317,8 +317,6 @@ static struct rcu_perf_ops sched_ops = {
.name = "sched"
};
#ifdef CONFIG_TASKS_RCU
/*
* Definitions for RCU-tasks perf testing.
*/
......@@ -346,24 +344,11 @@ static struct rcu_perf_ops tasks_ops = {
.name = "tasks"
};
#define RCUPERF_TASKS_OPS &tasks_ops,
static bool __maybe_unused torturing_tasks(void)
{
return cur_ops == &tasks_ops;
}
#else /* #ifdef CONFIG_TASKS_RCU */
#define RCUPERF_TASKS_OPS
static bool __maybe_unused torturing_tasks(void)
{
return false;
}
#endif /* #else #ifdef CONFIG_TASKS_RCU */
/*
* If performance tests complete, wait for shutdown to commence.
*/
......@@ -658,7 +643,7 @@ rcu_perf_init(void)
int firsterr = 0;
static struct rcu_perf_ops *perf_ops[] = {
&rcu_ops, &rcu_bh_ops, &srcu_ops, &srcud_ops, &sched_ops,
RCUPERF_TASKS_OPS
&tasks_ops,
};
if (!torture_init_begin(perf_type, verbose, &perf_runnable))
......
......@@ -199,7 +199,8 @@ MODULE_PARM_DESC(torture_runnable, "Start rcutorture at boot");
static u64 notrace rcu_trace_clock_local(void)
{
u64 ts = trace_clock_local();
unsigned long __maybe_unused ts_rem = do_div(ts, NSEC_PER_USEC);
(void)do_div(ts, NSEC_PER_USEC);
return ts;
}
#else /* #ifdef CONFIG_RCU_TRACE */
......@@ -496,7 +497,7 @@ static struct rcu_torture_ops rcu_busted_ops = {
.fqs = NULL,
.stats = NULL,
.irq_capable = 1,
.name = "rcu_busted"
.name = "busted"
};
/*
......@@ -522,7 +523,7 @@ static void srcu_read_delay(struct torture_random_state *rrsp)
delay = torture_random(rrsp) %
(nrealreaders * 2 * longdelay * uspertick);
if (!delay)
if (!delay && in_task())
schedule_timeout_interruptible(longdelay);
else
rcu_read_delay(rrsp);
......@@ -561,44 +562,7 @@ static void srcu_torture_barrier(void)
static void srcu_torture_stats(void)
{
int __maybe_unused cpu;
int idx;
#ifdef CONFIG_TREE_SRCU
idx = srcu_ctlp->srcu_idx & 0x1;
pr_alert("%s%s Tree SRCU per-CPU(idx=%d):",
torture_type, TORTURE_FLAG, idx);
for_each_possible_cpu(cpu) {
unsigned long l0, l1;
unsigned long u0, u1;
long c0, c1;
struct srcu_data *counts;
counts = per_cpu_ptr(srcu_ctlp->sda, cpu);
u0 = counts->srcu_unlock_count[!idx];
u1 = counts->srcu_unlock_count[idx];
/*
* Make sure that a lock is always counted if the corresponding
* unlock is counted.
*/
smp_rmb();
l0 = counts->srcu_lock_count[!idx];
l1 = counts->srcu_lock_count[idx];
c0 = l0 - u0;
c1 = l1 - u1;
pr_cont(" %d(%ld,%ld)", cpu, c0, c1);
}
pr_cont("\n");
#elif defined(CONFIG_TINY_SRCU)
idx = READ_ONCE(srcu_ctlp->srcu_idx) & 0x1;
pr_alert("%s%s Tiny SRCU per-CPU(idx=%d): (%hd,%hd)\n",
torture_type, TORTURE_FLAG, idx,
READ_ONCE(srcu_ctlp->srcu_lock_nesting[!idx]),
READ_ONCE(srcu_ctlp->srcu_lock_nesting[idx]));
#endif
srcu_torture_stats_print(srcu_ctlp, torture_type, TORTURE_FLAG);
}
static void srcu_torture_synchronize_expedited(void)
......@@ -620,6 +584,7 @@ static struct rcu_torture_ops srcu_ops = {
.call = srcu_torture_call,
.cb_barrier = srcu_torture_barrier,
.stats = srcu_torture_stats,
.irq_capable = 1,
.name = "srcu"
};
......@@ -652,6 +617,7 @@ static struct rcu_torture_ops srcud_ops = {
.call = srcu_torture_call,
.cb_barrier = srcu_torture_barrier,
.stats = srcu_torture_stats,
.irq_capable = 1,
.name = "srcud"
};
......@@ -696,8 +662,6 @@ static struct rcu_torture_ops sched_ops = {
.name = "sched"
};
#ifdef CONFIG_TASKS_RCU
/*
* Definitions for RCU-tasks torture testing.
*/
......@@ -735,24 +699,11 @@ static struct rcu_torture_ops tasks_ops = {
.name = "tasks"
};
#define RCUTORTURE_TASKS_OPS &tasks_ops,
static bool __maybe_unused torturing_tasks(void)
{
return cur_ops == &tasks_ops;
}
#else /* #ifdef CONFIG_TASKS_RCU */
#define RCUTORTURE_TASKS_OPS
static bool __maybe_unused torturing_tasks(void)
{
return false;
}
#endif /* #else #ifdef CONFIG_TASKS_RCU */
/*
* RCU torture priority-boost testing. Runs one real-time thread per
* CPU for moderate bursts, repeatedly registering RCU callbacks and
......@@ -1114,6 +1065,11 @@ rcu_torture_fakewriter(void *arg)
return 0;
}
static void rcu_torture_timer_cb(struct rcu_head *rhp)
{
kfree(rhp);
}
/*
* RCU torture reader from timer handler. Dereferences rcu_torture_current,
* incrementing the corresponding element of the pipeline array. The
......@@ -1176,6 +1132,14 @@ static void rcu_torture_timer(unsigned long unused)
__this_cpu_inc(rcu_torture_batch[completed]);
preempt_enable();
cur_ops->readunlock(idx);
/* Test call_rcu() invocation from interrupt handler. */
if (cur_ops->call) {
struct rcu_head *rhp = kmalloc(sizeof(*rhp), GFP_NOWAIT);
if (rhp)
cur_ops->call(rhp, rcu_torture_timer_cb);
}
}
/*
......@@ -1354,11 +1318,12 @@ rcu_torture_stats_print(void)
srcutorture_get_gp_data(cur_ops->ttype, srcu_ctlp,
&flags, &gpnum, &completed);
wtp = READ_ONCE(writer_task);
pr_alert("??? Writer stall state %s(%d) g%lu c%lu f%#x ->state %#lx\n",
pr_alert("??? Writer stall state %s(%d) g%lu c%lu f%#x ->state %#lx cpu %d\n",
rcu_torture_writer_state_getname(),
rcu_torture_writer_state,
gpnum, completed, flags,
wtp == NULL ? ~0UL : wtp->state);
wtp == NULL ? ~0UL : wtp->state,
wtp == NULL ? -1 : (int)task_cpu(wtp));
show_rcu_gp_kthreads();
rcu_ftrace_dump(DUMP_ALL);
}
......@@ -1749,7 +1714,7 @@ rcu_torture_init(void)
int firsterr = 0;
static struct rcu_torture_ops *torture_ops[] = {
&rcu_ops, &rcu_bh_ops, &rcu_busted_ops, &srcu_ops, &srcud_ops,
&sched_ops, RCUTORTURE_TASKS_OPS
&sched_ops, &tasks_ops,
};
if (!torture_init_begin(torture_type, verbose, &torture_runnable))
......
......@@ -33,6 +33,8 @@
#include "rcu_segcblist.h"
#include "rcu.h"
int rcu_scheduler_active __read_mostly;
static int init_srcu_struct_fields(struct srcu_struct *sp)
{
sp->srcu_lock_nesting[0] = 0;
......@@ -193,3 +195,9 @@ void synchronize_srcu(struct srcu_struct *sp)
destroy_rcu_head_on_stack(&rs.head);
}
EXPORT_SYMBOL_GPL(synchronize_srcu);
/* Lockdep diagnostics. */
void __init rcu_scheduler_starting(void)
{
rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
}
......@@ -51,6 +51,7 @@ module_param(counter_wrap_check, ulong, 0444);
static void srcu_invoke_callbacks(struct work_struct *work);
static void srcu_reschedule(struct srcu_struct *sp, unsigned long delay);
static void process_srcu(struct work_struct *work);
/*
* Initialize SRCU combining tree. Note that statically allocated
......@@ -896,6 +897,15 @@ static void __synchronize_srcu(struct srcu_struct *sp, bool do_norm)
__call_srcu(sp, &rcu.head, wakeme_after_rcu, do_norm);
wait_for_completion(&rcu.completion);
destroy_rcu_head_on_stack(&rcu.head);
/*
* Make sure that later code is ordered after the SRCU grace
* period. This pairs with the raw_spin_lock_irq_rcu_node()
* in srcu_invoke_callbacks(). Unlike Tree RCU, this is needed
* because the current CPU might have been totally uninvolved with
* (and thus unordered against) that grace period.
*/
smp_mb();
}
/**
......@@ -1194,7 +1204,7 @@ static void srcu_reschedule(struct srcu_struct *sp, unsigned long delay)
/*
* This is the work-queue function that handles SRCU grace periods.
*/
void process_srcu(struct work_struct *work)
static void process_srcu(struct work_struct *work)
{
struct srcu_struct *sp;
......@@ -1203,7 +1213,6 @@ void process_srcu(struct work_struct *work)
srcu_advance_state(sp);
srcu_reschedule(sp, srcu_get_delay(sp));
}
EXPORT_SYMBOL_GPL(process_srcu);
void srcutorture_get_gp_data(enum rcutorture_type test_type,
struct srcu_struct *sp, int *flags,
......@@ -1217,6 +1226,43 @@ void srcutorture_get_gp_data(enum rcutorture_type test_type,
}
EXPORT_SYMBOL_GPL(srcutorture_get_gp_data);
void srcu_torture_stats_print(struct srcu_struct *sp, char *tt, char *tf)
{
int cpu;
int idx;
unsigned long s0 = 0, s1 = 0;
idx = sp->srcu_idx & 0x1;
pr_alert("%s%s Tree SRCU per-CPU(idx=%d):", tt, tf, idx);
for_each_possible_cpu(cpu) {
unsigned long l0, l1;
unsigned long u0, u1;
long c0, c1;
struct srcu_data *counts;
counts = per_cpu_ptr(sp->sda, cpu);
u0 = counts->srcu_unlock_count[!idx];
u1 = counts->srcu_unlock_count[idx];
/*
* Make sure that a lock is always counted if the corresponding
* unlock is counted.
*/
smp_rmb();
l0 = counts->srcu_lock_count[!idx];
l1 = counts->srcu_lock_count[idx];
c0 = l0 - u0;
c1 = l1 - u1;
pr_cont(" %d(%ld,%ld)", cpu, c0, c1);
s0 += c0;
s1 += c1;
}
pr_cont(" T(%ld,%ld)\n", s0, s1);
}
EXPORT_SYMBOL_GPL(srcu_torture_stats_print);
static int __init srcu_bootup_announce(void)
{
pr_info("Hierarchical SRCU implementation.\n");
......
......@@ -56,8 +56,6 @@ static struct rcu_ctrlblk rcu_bh_ctrlblk = {
.curtail = &rcu_bh_ctrlblk.rcucblist,
};
#include "tiny_plugin.h"
void rcu_barrier_bh(void)
{
wait_rcu_gp(call_rcu_bh);
......
/*
* Read-Copy Update mechanism for mutual exclusion, the Bloatwatch edition
* Internal non-public definitions that provide either classic
* or preemptible semantics.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you can access it online at
* http://www.gnu.org/licenses/gpl-2.0.html.
*
* Copyright (c) 2010 Linaro
*
* Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
*/
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU)
#include <linux/kernel_stat.h>
int rcu_scheduler_active __read_mostly;
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
/*
* During boot, we forgive RCU lockdep issues. After this function is
* invoked, we start taking RCU lockdep issues seriously. Note that unlike
* Tree RCU, Tiny RCU transitions directly from RCU_SCHEDULER_INACTIVE
* to RCU_SCHEDULER_RUNNING, skipping the RCU_SCHEDULER_INIT stage.
* The reason for this is that Tiny RCU does not need kthreads, so does
* not have to care about the fact that the scheduler is half-initialized
* at a certain phase of the boot process. Unless SRCU is in the mix.
*/
void __init rcu_scheduler_starting(void)
{
WARN_ON(nr_context_switches() > 0);
rcu_scheduler_active = IS_ENABLED(CONFIG_SRCU)
? RCU_SCHEDULER_INIT : RCU_SCHEDULER_RUNNING;
}
#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU) */
This diff is collapsed.
......@@ -219,8 +219,6 @@ struct rcu_data {
/* qlen at last check for QS forcing */
unsigned long n_cbs_invoked; /* count of RCU cbs invoked. */
unsigned long n_nocbs_invoked; /* count of no-CBs RCU cbs invoked. */
unsigned long n_cbs_orphaned; /* RCU cbs orphaned by dying CPU */
unsigned long n_cbs_adopted; /* RCU cbs adopted from dying CPU */
unsigned long n_force_qs_snap;
/* did other CPU force QS recently? */
long blimit; /* Upper limit on a processed batch */
......@@ -268,7 +266,9 @@ struct rcu_data {
struct rcu_head **nocb_follower_tail;
struct swait_queue_head nocb_wq; /* For nocb kthreads to sleep on. */
struct task_struct *nocb_kthread;
raw_spinlock_t nocb_lock; /* Guard following pair of fields. */
int nocb_defer_wakeup; /* Defer wakeup of nocb_kthread. */
struct timer_list nocb_timer; /* Enforce finite deferral. */
/* The following fields are used by the leader, hence own cacheline. */
struct rcu_head *nocb_gp_head ____cacheline_internodealigned_in_smp;
......@@ -350,15 +350,6 @@ struct rcu_state {
/* End of fields guarded by root rcu_node's lock. */
raw_spinlock_t orphan_lock ____cacheline_internodealigned_in_smp;
/* Protect following fields. */
struct rcu_cblist orphan_pend; /* Orphaned callbacks that */
/* need a grace period. */
struct rcu_cblist orphan_done; /* Orphaned callbacks that */
/* are ready to invoke. */
/* (Contains counts.) */
/* End of fields guarded by orphan_lock. */
struct mutex barrier_mutex; /* Guards barrier fields. */
atomic_t barrier_cpu_count; /* # CPUs waiting on. */
struct completion barrier_completion; /* Wake at barrier end. */
......@@ -495,7 +486,7 @@ static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq);
static void rcu_init_one_nocb(struct rcu_node *rnp);
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy, unsigned long flags);
static bool rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp,
static bool rcu_nocb_adopt_orphan_cbs(struct rcu_data *my_rdp,
struct rcu_data *rdp,
unsigned long flags);
static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp);
......
......@@ -73,7 +73,7 @@ static void sync_exp_reset_tree_hotplug(struct rcu_state *rsp)
unsigned long flags;
unsigned long mask;
unsigned long oldmask;
int ncpus = READ_ONCE(rsp->ncpus);
int ncpus = smp_load_acquire(&rsp->ncpus); /* Order against locking. */
struct rcu_node *rnp;
struct rcu_node *rnp_up;
......
This diff is collapsed.
......@@ -568,7 +568,7 @@ static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq);
static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);
/* Track exiting tasks in order to allow them to be waited for. */
DEFINE_SRCU(tasks_rcu_exit_srcu);
DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu);
/* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */
#define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
......@@ -875,6 +875,22 @@ static void rcu_spawn_tasks_kthread(void)
mutex_unlock(&rcu_tasks_kthread_mutex);
}
/* Do the srcu_read_lock() for the above synchronize_srcu(). */
void exit_tasks_rcu_start(void)
{
preempt_disable();
current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
preempt_enable();
}
/* Do the srcu_read_unlock() for the above synchronize_srcu(). */
void exit_tasks_rcu_finish(void)
{
preempt_disable();
__srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx);
preempt_enable();
}
#endif /* #ifdef CONFIG_TASKS_RCU */
#ifndef CONFIG_TINY_RCU
......
......@@ -25,3 +25,4 @@ obj-$(CONFIG_SCHED_DEBUG) += debug.o
obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
obj-$(CONFIG_MEMBARRIER) += membarrier.o
......@@ -300,6 +300,8 @@ EXPORT_SYMBOL(try_wait_for_completion);
*/
bool completion_done(struct completion *x)
{
unsigned long flags;
if (!READ_ONCE(x->done))
return false;
......@@ -307,14 +309,9 @@ bool completion_done(struct completion *x)
* If ->done, we need to wait for complete() to release ->wait.lock
* otherwise we can end up freeing the completion before complete()
* is done referencing it.
*
* The RMB pairs with complete()'s RELEASE of ->wait.lock and orders
* the loads of ->done and ->wait.lock such that we cannot observe
* the lock before complete() acquires it while observing the ->done
* after it's acquired the lock.
*/
smp_rmb();
spin_unlock_wait(&x->wait.lock);
spin_lock_irqsave(&x->wait.lock, flags);
spin_unlock_irqrestore(&x->wait.lock, flags);
return true;
}
EXPORT_SYMBOL(completion_done);
......@@ -951,8 +951,13 @@ struct migration_arg {
static struct rq *__migrate_task(struct rq *rq, struct rq_flags *rf,
struct task_struct *p, int dest_cpu)
{
if (unlikely(!cpu_active(dest_cpu)))
return rq;
if (p->flags & PF_KTHREAD) {
if (unlikely(!cpu_online(dest_cpu)))
return rq;
} else {
if (unlikely(!cpu_active(dest_cpu)))
return rq;
}
/* Affinity changed (again). */
if (!cpumask_test_cpu(dest_cpu, &p->cpus_allowed))
......@@ -2635,6 +2640,16 @@ static struct rq *finish_task_switch(struct task_struct *prev)
prev_state = prev->state;
vtime_task_switch(prev);
perf_event_task_sched_in(prev, current);
/*
* The membarrier system call requires a full memory barrier
* after storing to rq->curr, before going back to user-space.
*
* TODO: This smp_mb__after_unlock_lock can go away if PPC end
* up adding a full barrier to switch_mm(), or we should figure
* out if a smp_mb__after_unlock_lock is really the proper API
* to use.
*/
smp_mb__after_unlock_lock();
finish_lock_switch(rq, prev);
finish_arch_post_lock_switch();
......@@ -3324,6 +3339,21 @@ static void __sched notrace __schedule(bool preempt)
if (likely(prev != next)) {
rq->nr_switches++;
rq->curr = next;
/*
* The membarrier system call requires each architecture
* to have a full memory barrier after updating
* rq->curr, before returning to user-space. For TSO
* (e.g. x86), the architecture must provide its own
* barrier in switch_mm(). For weakly ordered machines
* for which spin_unlock() acts as a full memory
* barrier, finish_lock_switch() in common code takes
* care of this barrier. For weakly ordered machines for
* which spin_unlock() acts as a RELEASE barrier (only
* arm64 and PowerPC), arm64 has a full barrier in
* switch_to(), and PowerPC has
* smp_mb__after_unlock_lock() before
* finish_lock_switch().
*/
++*switch_count;
trace_sched_switch(preempt, prev, next);
......@@ -3352,8 +3382,8 @@ void __noreturn do_task_dead(void)
* To avoid it, we have to wait for releasing tsk->pi_lock which
* is held by try_to_wake_up()
*/
smp_mb();
raw_spin_unlock_wait(&current->pi_lock);
raw_spin_lock_irq(&current->pi_lock);
raw_spin_unlock_irq(&current->pi_lock);
/* Causes final put_task_struct in finish_task_switch(): */
__set_current_state(TASK_DEAD);
......
/*
* Copyright (C) 2010, 2015 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
* Copyright (C) 2010-2017 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*
* membarrier system call
*
......@@ -17,12 +17,84 @@
#include <linux/syscalls.h>
#include <linux/membarrier.h>
#include <linux/tick.h>
#include <linux/cpumask.h>
#include "sched.h" /* for cpu_rq(). */
/*
* Bitmask made from a "or" of all commands within enum membarrier_cmd,
* except MEMBARRIER_CMD_QUERY.
*/
#define MEMBARRIER_CMD_BITMASK (MEMBARRIER_CMD_SHARED)
#define MEMBARRIER_CMD_BITMASK \
(MEMBARRIER_CMD_SHARED | MEMBARRIER_CMD_PRIVATE_EXPEDITED)
static void ipi_mb(void *info)
{
smp_mb(); /* IPIs should be serializing but paranoid. */
}
static void membarrier_private_expedited(void)
{
int cpu;
bool fallback = false;
cpumask_var_t tmpmask;
if (num_online_cpus() == 1)
return;
/*
* Matches memory barriers around rq->curr modification in
* scheduler.
*/
smp_mb(); /* system call entry is not a mb. */
/*
* Expedited membarrier commands guarantee that they won't
* block, hence the GFP_NOWAIT allocation flag and fallback
* implementation.
*/
if (!zalloc_cpumask_var(&tmpmask, GFP_NOWAIT)) {
/* Fallback for OOM. */
fallback = true;
}
cpus_read_lock();
for_each_online_cpu(cpu) {
struct task_struct *p;
/*
* Skipping the current CPU is OK even through we can be
* migrated at any point. The current CPU, at the point
* where we read raw_smp_processor_id(), is ensured to
* be in program order with respect to the caller
* thread. Therefore, we can skip this CPU from the
* iteration.
*/
if (cpu == raw_smp_processor_id())
continue;
rcu_read_lock();
p = task_rcu_dereference(&cpu_rq(cpu)->curr);
if (p && p->mm == current->mm) {
if (!fallback)
__cpumask_set_cpu(cpu, tmpmask);
else
smp_call_function_single(cpu, ipi_mb, NULL, 1);
}
rcu_read_unlock();
}
if (!fallback) {
smp_call_function_many(tmpmask, ipi_mb, NULL, 1);
free_cpumask_var(tmpmask);
}
cpus_read_unlock();
/*
* Memory barrier on the caller thread _after_ we finished
* waiting for the last IPI. Matches memory barriers around
* rq->curr modification in scheduler.
*/
smp_mb(); /* exit from system call is not a mb */
}
/**
* sys_membarrier - issue memory barriers on a set of threads
......@@ -30,10 +102,11 @@
* @flags: Currently needs to be 0. For future extensions.
*
* If this system call is not implemented, -ENOSYS is returned. If the
* command specified does not exist, or if the command argument is invalid,
* this system call returns -EINVAL. For a given command, with flags argument
* set to 0, this system call is guaranteed to always return the same value
* until reboot.
* command specified does not exist, not available on the running
* kernel, or if the command argument is invalid, this system call
* returns -EINVAL. For a given command, with flags argument set to 0,
* this system call is guaranteed to always return the same value until
* reboot.
*
* All memory accesses performed in program order from each targeted thread
* is guaranteed to be ordered with respect to sys_membarrier(). If we use
......@@ -52,18 +125,27 @@
*/
SYSCALL_DEFINE2(membarrier, int, cmd, int, flags)
{
/* MEMBARRIER_CMD_SHARED is not compatible with nohz_full. */
if (tick_nohz_full_enabled())
return -ENOSYS;
if (unlikely(flags))
return -EINVAL;
switch (cmd) {
case MEMBARRIER_CMD_QUERY:
return MEMBARRIER_CMD_BITMASK;
{
int cmd_mask = MEMBARRIER_CMD_BITMASK;
if (tick_nohz_full_enabled())
cmd_mask &= ~MEMBARRIER_CMD_SHARED;
return cmd_mask;
}
case MEMBARRIER_CMD_SHARED:
/* MEMBARRIER_CMD_SHARED is not compatible with nohz_full. */
if (tick_nohz_full_enabled())
return -EINVAL;
if (num_online_cpus() > 1)
synchronize_sched();
return 0;
case MEMBARRIER_CMD_PRIVATE_EXPEDITED:
membarrier_private_expedited();
return 0;
default:
return -EINVAL;
}
......
......@@ -96,20 +96,16 @@ void task_work_run(void)
* work->func() can do task_work_add(), do not set
* work_exited unless the list is empty.
*/
raw_spin_lock_irq(&task->pi_lock);
do {
work = READ_ONCE(task->task_works);
head = !work && (task->flags & PF_EXITING) ?
&work_exited : NULL;
} while (cmpxchg(&task->task_works, work, head) != work);
raw_spin_unlock_irq(&task->pi_lock);
if (!work)
break;
/*
* Synchronize with task_work_cancel(). It can't remove
* the first entry == work, cmpxchg(task_works) should
* fail, but it can play with *work and other entries.
*/
raw_spin_unlock_wait(&task->pi_lock);
do {
next = work->next;
......
......@@ -117,7 +117,7 @@ bool torture_offline(int cpu, long *n_offl_attempts, long *n_offl_successes,
torture_type, cpu);
(*n_offl_successes)++;
delta = jiffies - starttime;
sum_offl += delta;
*sum_offl += delta;
if (*min_offl < 0) {
*min_offl = delta;
*max_offl = delta;
......
......@@ -96,19 +96,26 @@ static struct conntrack_gc_work conntrack_gc_work;
void nf_conntrack_lock(spinlock_t *lock) __acquires(lock)
{
/* 1) Acquire the lock */
spin_lock(lock);
while (unlikely(nf_conntrack_locks_all)) {
spin_unlock(lock);
/*
* Order the 'nf_conntrack_locks_all' load vs. the
* spin_unlock_wait() loads below, to ensure
* that 'nf_conntrack_locks_all_lock' is indeed held:
*/
smp_rmb(); /* spin_lock(&nf_conntrack_locks_all_lock) */
spin_unlock_wait(&nf_conntrack_locks_all_lock);
spin_lock(lock);
}
/* 2) read nf_conntrack_locks_all, with ACQUIRE semantics
* It pairs with the smp_store_release() in nf_conntrack_all_unlock()
*/
if (likely(smp_load_acquire(&nf_conntrack_locks_all) == false))
return;
/* fast path failed, unlock */
spin_unlock(lock);
/* Slow path 1) get global lock */
spin_lock(&nf_conntrack_locks_all_lock);
/* Slow path 2) get the lock we want */
spin_lock(lock);
/* Slow path 3) release the global lock */
spin_unlock(&nf_conntrack_locks_all_lock);
}
EXPORT_SYMBOL_GPL(nf_conntrack_lock);
......@@ -149,28 +156,27 @@ static void nf_conntrack_all_lock(void)
int i;
spin_lock(&nf_conntrack_locks_all_lock);
nf_conntrack_locks_all = true;
/*
* Order the above store of 'nf_conntrack_locks_all' against
* the spin_unlock_wait() loads below, such that if
* nf_conntrack_lock() observes 'nf_conntrack_locks_all'
* we must observe nf_conntrack_locks[] held:
*/
smp_mb(); /* spin_lock(&nf_conntrack_locks_all_lock) */
nf_conntrack_locks_all = true;
for (i = 0; i < CONNTRACK_LOCKS; i++) {
spin_unlock_wait(&nf_conntrack_locks[i]);
spin_lock(&nf_conntrack_locks[i]);
/* This spin_unlock provides the "release" to ensure that
* nf_conntrack_locks_all==true is visible to everyone that
* acquired spin_lock(&nf_conntrack_locks[]).
*/
spin_unlock(&nf_conntrack_locks[i]);
}
}
static void nf_conntrack_all_unlock(void)
{
/*
* All prior stores must be complete before we clear
/* All prior stores must be complete before we clear
* 'nf_conntrack_locks_all'. Otherwise nf_conntrack_lock()
* might observe the false value but not the entire
* critical section:
* critical section.
* It pairs with the smp_load_acquire() in nf_conntrack_lock()
*/
smp_store_release(&nf_conntrack_locks_all, false);
spin_unlock(&nf_conntrack_locks_all_lock);
......
#!/bin/bash
#
# config_override.sh base override
#
# Combines base and override, removing any Kconfig options from base
# that conflict with any in override, concatenating what remains and
# sending the result to standard output.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, you can access it online at
# http://www.gnu.org/licenses/gpl-2.0.html.
#
# Copyright (C) IBM Corporation, 2017
#
# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
base=$1
if test -r $base
then
:
else
echo Base file $base unreadable!!!
exit 1
fi
override=$2
if test -r $override
then
:
else
echo Override file $override unreadable!!!
exit 1
fi
T=/tmp/config_override.sh.$$
trap 'rm -rf $T' 0
mkdir $T
sed < $override -e 's/^/grep -v "/' -e 's/=.*$/="/' |
awk '
{
if (last)
print last " |";
last = $0;
}
END {
if (last)
print last;
}' > $T/script
sh $T/script < $base
cat $override
......@@ -66,8 +66,33 @@ configfrag_boot_params () {
# configfrag_boot_cpus bootparam-string config-fragment-file config-cpus
#
# Decreases number of CPUs based on any maxcpus= boot parameters specified.
# Decreases number of CPUs based on any nr_cpus= boot parameters specified.
configfrag_boot_cpus () {
local bootargs="`configfrag_boot_params "$1" "$2"`"
local nr_cpus
if echo "${bootargs}" | grep -q 'nr_cpus=[0-9]'
then
nr_cpus="`echo "${bootargs}" | sed -e 's/^.*nr_cpus=\([0-9]*\).*$/\1/'`"
if test "$3" -gt "$nr_cpus"
then
echo $nr_cpus
else
echo $3
fi
else
echo $3
fi
}
# configfrag_boot_maxcpus bootparam-string config-fragment-file config-cpus
#
# Decreases number of CPUs based on any maxcpus= boot parameters specified.
# This allows tests where additional CPUs come online later during the
# test run. However, the torture parameters will be set based on the
# number of CPUs initially present, so the scripting should schedule
# test runs based on the maxcpus= boot parameter controlling the initial
# number of CPUs instead of on the ultimate number of CPUs.
configfrag_boot_maxcpus () {
local bootargs="`configfrag_boot_params "$1" "$2"`"
local maxcpus
if echo "${bootargs}" | grep -q 'maxcpus=[0-9]'
......
......@@ -2,7 +2,7 @@
#
# Build a kvm-ready Linux kernel from the tree in the current directory.
#
# Usage: kvm-build.sh config-template build-dir more-configs
# Usage: kvm-build.sh config-template build-dir
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -34,24 +34,17 @@ then
echo "kvm-build.sh :$builddir: Not a writable directory, cannot build into it"
exit 1
fi
moreconfigs=${3}
if test -z "$moreconfigs" -o ! -r "$moreconfigs"
then
echo "kvm-build.sh :$moreconfigs: Not a readable file"
exit 1
fi
T=/tmp/test-linux.sh.$$
trap 'rm -rf $T' 0
mkdir $T
grep -v 'CONFIG_[A-Z]*_TORTURE_TEST=' < ${config_template} > $T/config
cp ${config_template} $T/config
cat << ___EOF___ >> $T/config
CONFIG_INITRAMFS_SOURCE="$TORTURE_INITRD"
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_CONSOLE=y
___EOF___
cat $moreconfigs >> $T/config
configinit.sh $T/config O=$builddir
retval=$?
......
......@@ -40,7 +40,7 @@
T=/tmp/kvm-test-1-run.sh.$$
trap 'rm -rf $T' 0
touch $T
mkdir $T
. $KVM/bin/functions.sh
. $CONFIGFRAG/ver_functions.sh
......@@ -60,37 +60,33 @@ then
echo "kvm-test-1-run.sh :$resdir: Not a writable directory, cannot store results into it"
exit 1
fi
cp $config_template $resdir/ConfigFragment
echo ' ---' `date`: Starting build
echo ' ---' Kconfig fragment at: $config_template >> $resdir/log
touch $resdir/ConfigFragment.input $resdir/ConfigFragment
if test -r "$config_dir/CFcommon"
then
cat < $config_dir/CFcommon >> $T
echo " --- $config_dir/CFcommon" >> $resdir/ConfigFragment.input
cat < $config_dir/CFcommon >> $resdir/ConfigFragment.input
config_override.sh $config_dir/CFcommon $config_template > $T/Kc1
grep '#CHECK#' $config_dir/CFcommon >> $resdir/ConfigFragment
else
cp $config_template $T/Kc1
fi
# Optimizations below this point
# CONFIG_USB=n
# CONFIG_SECURITY=n
# CONFIG_NFS_FS=n
# CONFIG_SOUND=n
# CONFIG_INPUT_JOYSTICK=n
# CONFIG_INPUT_TABLET=n
# CONFIG_INPUT_TOUCHSCREEN=n
# CONFIG_INPUT_MISC=n
# CONFIG_INPUT_MOUSE=n
# # CONFIG_NET=n # disables console access, so accept the slower build.
# CONFIG_SCSI=n
# CONFIG_ATA=n
# CONFIG_FAT_FS=n
# CONFIG_MSDOS_FS=n
# CONFIG_VFAT_FS=n
# CONFIG_ISO9660_FS=n
# CONFIG_QUOTA=n
# CONFIG_HID=n
# CONFIG_CRYPTO=n
# CONFIG_PCCARD=n
# CONFIG_PCMCIA=n
# CONFIG_CARDBUS=n
# CONFIG_YENTA=n
echo " --- $config_template" >> $resdir/ConfigFragment.input
cat $config_template >> $resdir/ConfigFragment.input
grep '#CHECK#' $config_template >> $resdir/ConfigFragment
if test -n "$TORTURE_KCONFIG_ARG"
then
echo $TORTURE_KCONFIG_ARG | tr -s " " "\012" > $T/cmdline
echo " --- --kconfig argument" >> $resdir/ConfigFragment.input
cat $T/cmdline >> $resdir/ConfigFragment.input
config_override.sh $T/Kc1 $T/cmdline > $T/Kc2
# Note that "#CHECK#" is not permitted on commandline.
else
cp $T/Kc1 $T/Kc2
fi
cat $T/Kc2 >> $resdir/ConfigFragment
base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'`
if test "$base_resdir" != "$resdir" -a -f $base_resdir/bzImage -a -f $base_resdir/vmlinux
then
......@@ -100,7 +96,9 @@ then
KERNEL=$base_resdir/${BOOT_IMAGE##*/} # use the last component of ${BOOT_IMAGE}
ln -s $base_resdir/Make*.out $resdir # for kvm-recheck.sh
ln -s $base_resdir/.config $resdir # for kvm-recheck.sh
elif kvm-build.sh $config_template $builddir $T
# Arch-independent indicator
touch $resdir/builtkernel
elif kvm-build.sh $T/Kc2 $builddir
then
# Had to build a kernel for this test.
QEMU="`identify_qemu $builddir/vmlinux`"
......@@ -112,6 +110,8 @@ then
then
cp $builddir/$BOOT_IMAGE $resdir
KERNEL=$resdir/${BOOT_IMAGE##*/}
# Arch-independent indicator
touch $resdir/builtkernel
else
echo No identifiable boot image, not running KVM, see $resdir.
echo Do the torture scripts know about your architecture?
......@@ -149,7 +149,7 @@ fi
# Generate -smp qemu argument.
qemu_args="-enable-kvm -nographic $qemu_args"
cpu_count=`configNR_CPUS.sh $config_template`
cpu_count=`configNR_CPUS.sh $resdir/ConfigFragment`
cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"`
vcpus=`identify_qemu_vcpus`
if test $cpu_count -gt $vcpus
......
......@@ -41,6 +41,7 @@ PATH=${KVM}/bin:$PATH; export PATH
TORTURE_DEFCONFIG=defconfig
TORTURE_BOOT_IMAGE=""
TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD
TORTURE_KCONFIG_ARG=""
TORTURE_KMAKE_ARG=""
TORTURE_SHUTDOWN_GRACE=180
TORTURE_SUITE=rcu
......@@ -65,6 +66,7 @@ usage () {
echo " --duration minutes"
echo " --interactive"
echo " --jitter N [ maxsleep (us) [ maxspin (us) ] ]"
echo " --kconfig Kconfig-options"
echo " --kmake-arg kernel-make-arguments"
echo " --mac nn:nn:nn:nn:nn:nn"
echo " --no-initrd"
......@@ -129,6 +131,11 @@ do
jitter="$2"
shift
;;
--kconfig)
checkarg --kconfig "(Kconfig options)" $# "$2" '^CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\)\( CONFIG_[A-Z0-9_]\+=\([ynm]\|[0-9]\+\)\)*$' '^error$'
TORTURE_KCONFIG_ARG="$2"
shift
;;
--kmake-arg)
checkarg --kmake-arg "(kernel make arguments)" $# "$2" '.*' '^error$'
TORTURE_KMAKE_ARG="$2"
......@@ -205,6 +212,7 @@ do
then
cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF1`
cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"`
cpu_count=`configfrag_boot_maxcpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"`
for ((cur_rep=0;cur_rep<$config_reps;cur_rep++))
do
echo $CF1 $cpu_count >> $T/cfgcpu
......@@ -275,6 +283,7 @@ TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE
TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY
TORTURE_DEFCONFIG="$TORTURE_DEFCONFIG"; export TORTURE_DEFCONFIG
TORTURE_INITRD="$TORTURE_INITRD"; export TORTURE_INITRD
TORTURE_KCONFIG_ARG="$TORTURE_KCONFIG_ARG"; export TORTURE_KCONFIG_ARG
TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG
TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD
TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE
......@@ -324,6 +333,7 @@ function dump(first, pastlast, batchnum)
{
print "echo ----Start batch " batchnum ": `date`";
print "echo ----Start batch " batchnum ": `date` >> " rd "/log";
print "needqemurun="
jn=1
for (j = first; j < pastlast; j++) {
builddir=KVM "/b" jn
......@@ -359,10 +369,11 @@ function dump(first, pastlast, batchnum)
for (j = 1; j < jn; j++) {
builddir=KVM "/b" j
print "rm -f " builddir ".ready"
print "if test -z \"$TORTURE_BUILDONLY\""
print "if test -f \"" rd cfr[j] "/builtkernel\""
print "then"
print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
print "\techo ----", cfr[j], cpusr[j] ovf ": Kernel present. `date`";
print "\techo ----", cfr[j], cpusr[j] ovf ": Kernel present. `date` >> " rd "/log";
print "\tneedqemurun=1"
print "fi"
}
njitter = 0;
......@@ -377,13 +388,22 @@ function dump(first, pastlast, batchnum)
njitter = 0;
print "echo Build-only run, so suppressing jitter >> " rd "/log"
}
for (j = 0; j < njitter; j++)
print "jitter.sh " j " " dur " " ja[2] " " ja[3] "&"
print "wait"
print "if test -z \"$TORTURE_BUILDONLY\""
if (TORTURE_BUILDONLY) {
print "needqemurun="
}
print "if test -n \"$needqemurun\""
print "then"
print "\techo ---- Starting kernels. `date`";
print "\techo ---- Starting kernels. `date` >> " rd "/log";
for (j = 0; j < njitter; j++)
print "\tjitter.sh " j " " dur " " ja[2] " " ja[3] "&"
print "\twait"
print "\techo ---- All kernel runs complete. `date`";
print "\techo ---- All kernel runs complete. `date` >> " rd "/log";
print "else"
print "\twait"
print "\techo ---- No kernel runs. `date`";
print "\techo ---- No kernel runs. `date` >> " rd "/log";
print "fi"
for (j = 1; j < jn; j++) {
builddir=KVM "/b" j
......
rcutorture.torture_type=rcu_busted
rcutorture.torture_type=busted
......@@ -4,6 +4,7 @@ CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=n
#CHECK#CONFIG_TINY_SRCU=y
CONFIG_RCU_TRACE=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_COUNT=n
rcutorture.torture_type=rcu_bh maxcpus=8
rcutorture.torture_type=rcu_bh maxcpus=8 nr_cpus=43
rcutree.gp_preinit_delay=3
rcutree.gp_init_delay=3
rcutree.gp_cleanup_delay=3
......
......@@ -69,11 +69,11 @@ CONFIG_RCU_TORTURE_TEST_RUNNABLE
CONFIG_PREEMPT_RCU
CONFIG_TREE_RCU
CONFIG_TINY_RCU
CONFIG_TASKS_RCU
These are controlled by CONFIG_PREEMPT and/or CONFIG_SMP.
CONFIG_SRCU
CONFIG_TASKS_RCU
Selected by CONFIG_RCU_TORTURE_TEST, so cannot disable.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment