Commit 9cfe4a93 authored by Michael Hennerich's avatar Michael Hennerich Committed by Linus Torvalds

fbdev: bfin-lq035q1-fb: new Blackfin Landscape LCD EZ-Extender driver

Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT)
http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extenderSigned-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarBryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 07697461
/*
* Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
*
* Copyright 2008-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef BFIN_LQ035Q1_H
#define BFIN_LQ035Q1_H
#define LQ035_RL (0 << 8) /* Right -> Left Scan */
#define LQ035_LR (1 << 8) /* Left -> Right Scan */
#define LQ035_TB (1 << 9) /* Top -> Botton Scan */
#define LQ035_BT (0 << 9) /* Botton -> Top Scan */
#define LQ035_BGR (1 << 11) /* Use BGR format */
#define LQ035_RGB (0 << 11) /* Use RGB format */
#define LQ035_NORM (1 << 13) /* Reversal */
#define LQ035_REV (0 << 13) /* Reversal */
struct bfin_lq035q1fb_disp_info {
unsigned mode;
/* GPIOs */
int use_bl;
unsigned gpio_bl;
};
#endif /* BFIN_LQ035Q1_H */
......@@ -614,6 +614,21 @@ config FB_BFIN_T350MCQB
This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
config FB_BFIN_LQ035Q1
tristate "SHARP LQ035Q1DH02 TFT LCD"
depends on FB && BLACKFIN && SPI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BFIN_GPTIMERS
help
This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
the Blackfin Landscape LCD EZ-Extender Card.
This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
To compile this driver as a module, choose M here: the
module will be called bfin-lq035q1-fb.
config FB_STI
tristate "HP STI frame buffer device support"
......
......@@ -137,6 +137,7 @@ obj-$(CONFIG_FB_EFI) += efifb.o
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
obj-$(CONFIG_FB_MX3) += mx3fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment