Commit a9c976b1 authored by Evgeny Novikov's avatar Evgeny Novikov Committed by Mauro Carvalho Chehab

media: pt3: Switch to using functions pcim_* and devm_*

pt3_probe() did not free one of IO mappings in case when one of them was
successful while another one failed. The patch fixed that by using
functions pcim_*. Also, it simplifies error handling through switching
to devm_* functions.

Found by Linux Driver Verification project (linuxtesting.org).

Link: https://lore.kernel.org/linux-media/20210814155742.11392-1-novikov@ispras.ruSigned-off-by: default avatarEvgeny Novikov <novikov@ispras.ru>
Co-developed-by: default avatarKirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: default avatarKirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: default avatarAkihiro Tsukada <tskd08@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 589a9f0e
......@@ -685,12 +685,6 @@ static void pt3_remove(struct pci_dev *pdev)
for (i = PT3_NUM_FE - 1; i >= 0; i--)
pt3_cleanup_adapter(pt3, i);
i2c_del_adapter(&pt3->i2c_adap);
kfree(pt3->i2c_buf);
pci_iounmap(pt3->pdev, pt3->regs[0]);
pci_iounmap(pt3->pdev, pt3->regs[1]);
pci_release_regions(pdev);
pci_disable_device(pdev);
kfree(pt3);
}
static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
......@@ -704,14 +698,14 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pci_read_config_byte(pdev, PCI_REVISION_ID, &rev) || rev != 1)
return -ENODEV;
ret = pci_enable_device(pdev);
ret = pcim_enable_device(pdev);
if (ret < 0)
return -ENODEV;
pci_set_master(pdev);
ret = pci_request_regions(pdev, DRV_NAME);
ret = pcim_iomap_regions(pdev, BIT(0) | BIT(2), DRV_NAME);
if (ret < 0)
goto err_disable_device;
return ret;
ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
if (ret == 0)
......@@ -722,42 +716,32 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
else {
dev_err(&pdev->dev, "Failed to set DMA mask\n");
goto err_release_regions;
return ret;
}
dev_info(&pdev->dev, "Use 32bit DMA\n");
}
pt3 = kzalloc(sizeof(*pt3), GFP_KERNEL);
if (!pt3) {
ret = -ENOMEM;
goto err_release_regions;
}
pt3 = devm_kzalloc(&pdev->dev, sizeof(*pt3), GFP_KERNEL);
if (!pt3)
return -ENOMEM;
pci_set_drvdata(pdev, pt3);
pt3->pdev = pdev;
mutex_init(&pt3->lock);
pt3->regs[0] = pci_ioremap_bar(pdev, 0);
pt3->regs[1] = pci_ioremap_bar(pdev, 2);
if (pt3->regs[0] == NULL || pt3->regs[1] == NULL) {
dev_err(&pdev->dev, "Failed to ioremap\n");
ret = -ENOMEM;
goto err_kfree;
}
pt3->regs[0] = pcim_iomap_table(pdev)[0];
pt3->regs[1] = pcim_iomap_table(pdev)[2];
ver = ioread32(pt3->regs[0] + REG_VERSION);
if ((ver >> 16) != 0x0301) {
dev_warn(&pdev->dev, "PT%d, I/F-ver.:%d not supported\n",
ver >> 24, (ver & 0x00ff0000) >> 16);
ret = -ENODEV;
goto err_iounmap;
return -ENODEV;
}
pt3->num_bufs = clamp_val(num_bufs, MIN_DATA_BUFS, MAX_DATA_BUFS);
pt3->i2c_buf = kmalloc(sizeof(*pt3->i2c_buf), GFP_KERNEL);
if (pt3->i2c_buf == NULL) {
ret = -ENOMEM;
goto err_iounmap;
}
pt3->i2c_buf = devm_kmalloc(&pdev->dev, sizeof(*pt3->i2c_buf), GFP_KERNEL);
if (!pt3->i2c_buf)
return -ENOMEM;
i2c = &pt3->i2c_adap;
i2c->owner = THIS_MODULE;
i2c->algo = &pt3_i2c_algo;
......@@ -767,7 +751,7 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
i2c_set_adapdata(i2c, pt3);
ret = i2c_add_adapter(i2c);
if (ret < 0)
goto err_i2cbuf;
return ret;
for (i = 0; i < PT3_NUM_FE; i++) {
ret = pt3_alloc_adapter(pt3, i);
......@@ -799,21 +783,7 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
while (i >= 0)
pt3_cleanup_adapter(pt3, i--);
i2c_del_adapter(i2c);
err_i2cbuf:
kfree(pt3->i2c_buf);
err_iounmap:
if (pt3->regs[0])
pci_iounmap(pdev, pt3->regs[0]);
if (pt3->regs[1])
pci_iounmap(pdev, pt3->regs[1]);
err_kfree:
kfree(pt3);
err_release_regions:
pci_release_regions(pdev);
err_disable_device:
pci_disable_device(pdev);
return ret;
}
static const struct pci_device_id pt3_id_table[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment