arm64: dts: qcom: sm8250: add mi2s pinconfs

Add primary and tertinary mi2s pinconfs required to get I2S audio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201202180741.16386-6-srinivas.kandagatla@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2344,6 +2344,37 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 180>;
 			wakeup-parent = <&pdc>;
 
+			pri_mi2s_active: pri-mi2s-active {
+				sclk {
+					pins = "gpio138";
+					function = "mi2s0_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws {
+					pins = "gpio141";
+					function = "mi2s0_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data0 {
+					pins = "gpio139";
+					function = "mi2s0_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				data1 {
+					pins = "gpio140";
+					function = "mi2s0_data1";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
+
 			qup_i2c0_default: qup-i2c0-default {
 				mux {
 					pins = "gpio28", "gpio29";
@@ -2940,6 +2971,30 @@ mux {
 					function = "qup18";
 				};
 			};
+
+			tert_mi2s_active: tert-mi2s-active {
+				sck {
+					pins = "gpio133";
+					function = "mi2s2_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data0 {
+					pins = "gpio134";
+					function = "mi2s2_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				ws {
+					pins = "gpio135";
+					function = "mi2s2_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {