Commit d867c43e authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: ksdazzle-sir.c: remove err() usage

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 32279240
......@@ -168,10 +168,10 @@ struct ksdazzle_cb {
static void ksdazzle_speed_irq(struct urb *urb)
{
/* unlink, shutdown, unplug, other nasties */
if (urb->status != 0) {
err("ksdazzle_speed_irq: urb asynchronously failed - %d",
urb->status);
}
if (urb->status != 0)
dev_err(&urb->dev->dev,
"ksdazzle_speed_irq: urb asynchronously failed - %d\n",
urb->status);
}
/* Send a control request to change speed of the dongle */
......@@ -245,14 +245,16 @@ static void ksdazzle_send_irq(struct urb *urb)
/* in process of stopping, just drop data */
if (!netif_running(kingsun->netdev)) {
err("ksdazzle_send_irq: Network not running!");
dev_err(&kingsun->usbdev->dev,
"ksdazzle_send_irq: Network not running!\n");
return;
}
/* unlink, shutdown, unplug, other nasties */
if (urb->status != 0) {
err("ksdazzle_send_irq: urb asynchronously failed - %d",
urb->status);
dev_err(&kingsun->usbdev->dev,
"ksdazzle_send_irq: urb asynchronously failed - %d\n",
urb->status);
return;
}
......@@ -271,7 +273,9 @@ static void ksdazzle_send_irq(struct urb *urb)
if (kingsun->tx_buf_clear_used > 0) {
/* There is more data to be sent */
if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
err("ksdazzle_send_irq: failed tx_urb submit: %d", ret);
dev_err(&kingsun->usbdev->dev,
"ksdazzle_send_irq: failed tx_urb submit: %d\n",
ret);
switch (ret) {
case -ENODEV:
case -EPIPE:
......@@ -320,7 +324,8 @@ static netdev_tx_t ksdazzle_hard_xmit(struct sk_buff *skb,
kingsun->tx_buf_clear_used = wraplen;
if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret);
dev_err(&kingsun->usbdev->dev,
"ksdazzle_hard_xmit: failed tx_urb submit: %d\n", ret);
switch (ret) {
case -ENODEV:
case -EPIPE:
......@@ -355,8 +360,9 @@ static void ksdazzle_rcv_irq(struct urb *urb)
/* unlink, shutdown, unplug, other nasties */
if (urb->status != 0) {
err("ksdazzle_rcv_irq: urb asynchronously failed - %d",
urb->status);
dev_err(&kingsun->usbdev->dev,
"ksdazzle_rcv_irq: urb asynchronously failed - %d\n",
urb->status);
kingsun->receiving = 0;
return;
}
......@@ -430,7 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev)
sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
if (!kingsun->irlap) {
err("ksdazzle-sir: irlap_open failed");
dev_err(&kingsun->usbdev->dev, "irlap_open failed\n");
goto free_mem;
}
......@@ -442,7 +448,7 @@ static int ksdazzle_net_open(struct net_device *netdev)
kingsun->rx_urb->status = 0;
err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
if (err) {
err("ksdazzle-sir: first urb-submit failed: %d", err);
dev_err(&kingsun->usbdev->dev, "first urb-submit failed: %d\n", err);
goto close_irlap;
}
......@@ -590,13 +596,14 @@ static int ksdazzle_probe(struct usb_interface *intf,
*/
interface = intf->cur_altsetting;
if (interface->desc.bNumEndpoints != 2) {
err("ksdazzle: expected 2 endpoints, found %d",
interface->desc.bNumEndpoints);
dev_err(&intf->dev, "ksdazzle: expected 2 endpoints, found %d\n",
interface->desc.bNumEndpoints);
return -ENODEV;
}
endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
if (!usb_endpoint_is_int_in(endpoint)) {
err("ksdazzle: endpoint 0 is not interrupt IN");
dev_err(&intf->dev,
"ksdazzle: endpoint 0 is not interrupt IN\n");
return -ENODEV;
}
......@@ -604,13 +611,16 @@ static int ksdazzle_probe(struct usb_interface *intf,
pipe = usb_rcvintpipe(dev, ep_in);
maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
if (maxp_in > 255 || maxp_in <= 1) {
err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in);
dev_err(&intf->dev,
"ksdazzle: endpoint 0 has max packet size %d not in range [2..255]\n",
maxp_in);
return -ENODEV;
}
endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
if (!usb_endpoint_is_int_out(endpoint)) {
err("ksdazzle: endpoint 1 is not interrupt OUT");
dev_err(&intf->dev,
"ksdazzle: endpoint 1 is not interrupt OUT\n");
return -ENODEV;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment