Merge tag 'reset-for-v6.6' of git://git.pengutronix.de/pza/linux into soc/drivers

Reset controller updates for v6.6

Clean up DT includes and remove unneeded platform_set_drvdata() calls
across reset drivers, add support for the Versal NET platform to the
zynqmp driver, and let the hisilicon driver use dev_err_probe().

* tag 'reset-for-v6.6' of git://git.pengutronix.de/pza/linux:
  reset: ti: syscon: remove unneeded call to platform_set_drvdata()
  reset: zynqmp: removed unneeded call to platform_set_drvdata()
  reset: zynq: remove unneeded call to platfrom_set_drvdata()
  reset: uniphier-glue: remove unneeded call to platform_set_drvdata()
  reset: npcm: remove unneeded call to platform_set_drvdata()
  reset: meson: remove unneeded call to platform_set_drvdata()
  reset: lpc18xx: remove unneeded call to platform_set_drvdata()
  reset: lantiq: remove unneeded call to platform_set_drvdata()
  reset: bcm6345: remove unneeded call to platform_set_drvdata()
  reset: ath79: remove unneeded call to platform_set_drvdata()
  reset: hisilicon: Use dev_err_probe instead of dev_err
  reset: reset-zynqmp: add support for Versal NET platform
  dt-bindings: reset: Updated binding for Versal-NET reset driver
  reset: Explicitly include correct DT includes

Link: https://lore.kernel.org/r/20230808145950.3057250-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml

@@ -32,6 +32,7 @@ properties:
     enum:
       - xlnx,zynqmp-reset
       - xlnx,versal-reset
+      - xlnx,versal-net-reset
 
   "#reset-cells":
     const: 1

drivers/reset/hisilicon/hi6220_reset.c

@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 #include <linux/reset-controller.h>

drivers/reset/hisilicon/reset-hi3660.c

@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
@@ -90,8 +90,8 @@ static int hi3660_reset_probe(struct platform_device *pdev)
 							  "hisi,rst-syscon");
 	}
 	if (IS_ERR(rc->map)) {
-		dev_err(dev, "failed to get hisilicon,rst-syscon\n");
-		return PTR_ERR(rc->map);
+		return dev_err_probe(dev, PTR_ERR(rc->map),
+			"failed to get hisilicon,rst-syscon\n");
 	}
 
 	rc->rst.ops = &hi3660_reset_ops,

drivers/reset/reset-ath79.c

@@ -93,8 +93,6 @@ static int ath79_reset_probe(struct platform_device *pdev)
 	if (!ath79_reset)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, ath79_reset);
-
 	ath79_reset->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ath79_reset->base))
 		return PTR_ERR(ath79_reset->base);

drivers/reset/reset-bcm6345.c

@@ -102,8 +102,6 @@ static int bcm6345_reset_probe(struct platform_device *pdev)
 	if (!bcm6345_reset)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, bcm6345_reset);
-
 	bcm6345_reset->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(bcm6345_reset->base))
 		return PTR_ERR(bcm6345_reset->base);

drivers/reset/reset-imx7.c

@@ -9,7 +9,7 @@
 
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/regmap.h>

drivers/reset/reset-intel-gw.c

@@ -6,7 +6,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/init.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>

drivers/reset/reset-k210.c

@@ -3,7 +3,6 @@
  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/delay.h>

drivers/reset/reset-lantiq.c

@@ -173,7 +173,6 @@ static int lantiq_rcu_reset_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->dev = &pdev->dev;
-	platform_set_drvdata(pdev, priv);
 
 	err = lantiq_rcu_reset_of_parse(pdev, priv);
 	if (err)

drivers/reset/reset-lpc18xx.c

@@ -188,8 +188,6 @@ static int lpc18xx_rgu_probe(struct platform_device *pdev)
 	rc->rcdev.ops = &lpc18xx_rgu_ops;
 	rc->rcdev.of_node = pdev->dev.of_node;
 
-	platform_set_drvdata(pdev, rc);
-
 	ret = reset_controller_register(&rc->rcdev);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register device\n");

drivers/reset/reset-meson-audio-arb.c

@@ -5,7 +5,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/spinlock.h>
 

drivers/reset/reset-meson.c

@@ -14,7 +14,6 @@
 #include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/of_device.h>
 
 #define BITS_PER_REG	32
 
@@ -129,8 +128,6 @@ static int meson_reset_probe(struct platform_device *pdev)
 	if (!data->param)
 		return -ENODEV;
 
-	platform_set_drvdata(pdev, data);
-
 	spin_lock_init(&data->lock);
 
 	data->rcdev.owner = THIS_MODULE;

drivers/reset/reset-microchip-sparx5.c

@@ -7,9 +7,10 @@
  * https://github.com/microchip-ung/sparx-5_reginfo
  */
 #include <linux/mfd/syscon.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
 

drivers/reset/reset-mpfs.c

@@ -9,6 +9,7 @@
 #include <linux/auxiliary_bus.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <dt-bindings/clock/microchip,mpfs-clock.h>

drivers/reset/reset-npcm.c

@@ -394,8 +394,6 @@ static int npcm_rc_probe(struct platform_device *pdev)
 	rc->rcdev.of_reset_n_cells = 2;
 	rc->rcdev.of_xlate = npcm_reset_xlate;
 
-	platform_set_drvdata(pdev, rc);
-
 	ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register device\n");

drivers/reset/reset-qcom-aoss.c

@@ -8,7 +8,7 @@
 #include <linux/reset-controller.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 
 struct qcom_aoss_reset_map {

drivers/reset/reset-qcom-pdc.c

@@ -4,7 +4,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>

drivers/reset/reset-simple.c

@@ -16,7 +16,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/reset/reset-simple.h>

drivers/reset/reset-ti-syscon.c

@@ -204,8 +204,6 @@ static int ti_syscon_reset_probe(struct platform_device *pdev)
 	data->controls = controls;
 	data->nr_controls = nr_controls;
 
-	platform_set_drvdata(pdev, data);
-
 	return devm_reset_controller_register(dev, &data->rcdev);
 }
 

drivers/reset/reset-uniphier-glue.c

@@ -6,7 +6,7 @@
 
 #include <linux/clk.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/reset/reset-simple.h>
@@ -99,8 +99,6 @@ static int uniphier_glue_reset_probe(struct platform_device *pdev)
 	priv->rdata.rcdev.of_node = dev->of_node;
 	priv->rdata.active_low = true;
 
-	platform_set_drvdata(pdev, priv);
-
 	return devm_reset_controller_register(dev, &priv->rdata.rcdev);
 }
 

drivers/reset/reset-uniphier.c

@@ -7,7 +7,6 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>

drivers/reset/reset-zynq.c

@@ -94,7 +94,6 @@ static int zynq_reset_probe(struct platform_device *pdev)
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
-	platform_set_drvdata(pdev, priv);
 
 	priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 						     "syscon");

drivers/reset/reset-zynqmp.c

@@ -9,11 +9,11 @@
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/firmware/xlnx-zynqmp.h>
-#include <linux/of_device.h>
 
 #define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
 #define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
 #define VERSAL_NR_RESETS	95
+#define VERSAL_NET_NR_RESETS	176
 
 struct zynqmp_reset_soc_data {
 	u32 reset_id;
@@ -88,6 +88,11 @@ static const struct zynqmp_reset_soc_data versal_reset_data = {
 	.num_resets = VERSAL_NR_RESETS,
 };
 
+static const struct zynqmp_reset_soc_data versal_net_reset_data = {
+	.reset_id = 0,
+	.num_resets = VERSAL_NET_NR_RESETS,
+};
+
 static const struct reset_control_ops zynqmp_reset_ops = {
 	.reset = zynqmp_reset_reset,
 	.assert = zynqmp_reset_assert,
@@ -107,8 +112,6 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
 	if (!priv->data)
 		return -EINVAL;
 
-	platform_set_drvdata(pdev, priv);
-
 	priv->rcdev.ops = &zynqmp_reset_ops;
 	priv->rcdev.owner = THIS_MODULE;
 	priv->rcdev.of_node = pdev->dev.of_node;
@@ -122,6 +125,7 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
 static const struct of_device_id zynqmp_reset_dt_ids[] = {
 	{ .compatible = "xlnx,zynqmp-reset", .data = &zynqmp_reset_data, },
 	{ .compatible = "xlnx,versal-reset", .data = &versal_reset_data, },
+	{ .compatible = "xlnx,versal-net-reset", .data = &versal_net_reset_data, },
 	{ /* sentinel */ },
 };