Merge tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "This tme we have again a big pile of qcom-qmp-* changes, one new
  driver and bunch of new hardware support.

  New hardware support:

   - Allwinner H616 USB PHY and A100 DPHY support

   - TI J721s2, J784s4 and J721e support

   - Freescale i.MX8MP PCIe PHY support

   - New driver for Renesas Ethernet SERDES supporting R-Car S4-8

   - Qualcomm SM8450 PCIe1 PHY support in EP mode

   - Qualcomm SC8280XP PCIe PHY support (including x4 mode)

   - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

  Updates:

   - A big pile of updates on qcom-qmp-* drivers following the driver
     split and reorganization merged earlier

   - Phy order of API calls documentation update"

* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
  phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
  dt-bindings: phy-j721e-wiz: add j721s2 compatible string
  phy: use devm_platform_get_and_ioremap_resource()
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  phy: qcom-qmp-pcie: drop redundant clock allocation
  phy: qcom-qmp-usb: drop redundant clock allocation
  phy: qcom-qmp: drop unused type header
  phy: qcom-qmp-usb: drop sc8280xp reference-clock source
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
  phy: qcom-qmp-combo: add support for updated sc8280xp binding
  phy: qcom-qmp-combo: rename DP_PHY register pointer
  phy: qcom-qmp-combo: rename common-register pointers
  phy: qcom-qmp-combo: clean up DP clock callbacks
  phy: qcom-qmp-combo: separate clock and provider registration
  phy: qcom-qmp-combo: add clock registration helper
  ...

Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml

@@ -17,13 +17,20 @@ properties:
   compatible:
     oneOf:
       - const: allwinner,sun6i-a31-mipi-dphy
+      - const: allwinner,sun50i-a100-mipi-dphy
       - items:
           - const: allwinner,sun50i-a64-mipi-dphy
           - const: allwinner,sun6i-a31-mipi-dphy
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dphy
+          - const: allwinner,sun50i-a100-mipi-dphy
 
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   clocks:
     items:
       - description: Bus Clock
@@ -53,6 +60,7 @@ required:
   - "#phy-cells"
   - compatible
   - reg
+  - interrupts
   - clocks
   - clock-names
   - resets
@@ -61,9 +69,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     dphy0: d-phy@1ca1000 {
         compatible = "allwinner,sun6i-a31-mipi-dphy";
         reg = <0x01ca1000 0x1000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu 23>, <&ccu 97>;
         clock-names = "bus", "mod";
         resets = <&ccu 4>;

Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml

@@ -36,18 +36,22 @@ properties:
       - const: pmu3
 
   clocks:
+    minItems: 4
     items:
       - description: USB OTG PHY bus clock
       - description: USB Host 0 PHY bus clock
       - description: USB Host 1 PHY bus clock
       - description: USB Host 2 PHY bus clock
+      - description: PMU clock for host port 2
 
   clock-names:
+    minItems: 4
     items:
       - const: usb0_phy
       - const: usb1_phy
       - const: usb2_phy
       - const: usb3_phy
+      - const: pmu2_clk
 
   resets:
     items:
@@ -96,6 +100,28 @@ required:
   - resets
   - reset-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-usb-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+
+        clock-names:
+          maxItems: 4
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml

@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - fsl,imx8mm-pcie-phy
+      - fsl,imx8mp-pcie-phy
 
   reg:
     maxItems: 1
@@ -28,11 +29,16 @@ properties:
       - const: ref
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reset-names:
-    items:
-      - const: pciephy
+    oneOf:
+      - items:          # for iMX8MM
+          - const: pciephy
+      - items:          # for IMX8MP
+          - const: pciephy
+          - const: perst
 
   fsl,refclk-pad-mode:
     description: |
@@ -60,6 +66,10 @@ properties:
     description: A boolean property indicating the CLKREQ# signal is
       not supported in the board design (optional)
 
+  power-domains:
+    description: PCIe PHY  power domain (optional).
+    maxItems: 1
+
 required:
   - "#phy-cells"
   - compatible

Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml → Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml

 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (PCIe)
+title: Qualcomm QMP PHY controller (PCIe, IPQ8074)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,6 +13,9 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-pcie-phy.yaml.
+
 properties:
   compatible:
     enum:

Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml → Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml

 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (UFS)
+title: Qualcomm QMP PHY controller (UFS, MSM8996)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,13 +13,15 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-ufs-phy.yaml.
+
 properties:
   compatible:
     enum:
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
-      - qcom,sc8280xp-qmp-ufs-phy
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sm6115-qmp-ufs-phy
       - qcom,sm6350-qmp-ufs-phy
@@ -119,7 +121,6 @@ allOf:
             enum:
               - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6115-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
@@ -156,7 +157,6 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
@@ -211,11 +211,12 @@ allOf:
 
 examples:
   - |
-    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
+
     phy-wrapper@1d87000 {
-        compatible = "qcom,sc8280xp-qmp-ufs-phy";
-        reg = <0x01d87000 0xe10>;
+        compatible = "qcom,sm8250-qmp-ufs-phy";
+        reg = <0x01d87000 0x1c0>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x01d87000 0x1000>;

Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml → Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml

 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb3-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (USB)
+title: Qualcomm QMP PHY controller (USB, MSM8996)
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -13,6 +13,9 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb3-uni-phy.yaml.
+
 properties:
   compatible:
     enum:
@@ -23,7 +26,6 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-usb3-phy
-      - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
@@ -201,7 +203,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
@@ -268,16 +269,6 @@ allOf:
             - const: phy_phy
             - const: phy
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8280xp-qmp-usb3-uni-phy
-    then:
-      required:
-        - power-domains
-
   - if:
       properties:
         compatible:
@@ -349,7 +340,6 @@ allOf:
           contains:
             enum:
               - qcom,msm8996-qmp-usb3-phy
-              - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
     then:

Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml → Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml

@@ -2,10 +2,17 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP USB3 DP PHY controller
+title: Qualcomm QMP USB3 DP PHY controller (SC7180)
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
+
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb43dp-phy.yaml.
 
 maintainers:
   - Wesley Cheng <quic_wcheng@quicinc.com>
@@ -16,7 +23,6 @@ properties:
       - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7280-qmp-usb3-dp-phy
       - qcom,sc8180x-qmp-usb3-dp-phy
-      - qcom,sc8280xp-qmp-usb43dp-phy
       - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sm8250-qmp-usb3-dp-phy
   reg:
@@ -162,17 +168,6 @@ required:
 
 additionalProperties: false
 
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8280xp-qmp-usb43dp-phy
-    then:
-      required:
-        - power-domains
-
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: rchng
+      - const: pipe
+      - const: pipediv2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  qcom,4ln-config-sel:
+    description: PCIe 4-lane configuration
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of TCSR syscon
+          - description: offset of PCIe 4-lane configuration register
+          - description: offset of configuration bit for this PHY
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+    then:
+      properties:
+        reg:
+          items:
+            - description: port a
+            - description: port b
+      required:
+        - qcom,4ln-config-sel
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    pcie2b_phy: phy@1c18000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+      reg = <0x01c18000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+               <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2B_PIPE_CLK>,
+               <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2B_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2b_pipe_clk";
+
+      #phy-cells = <0>;
+    };
+
+    pcie2a_phy: phy@1c24000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+      reg = <0x01c24000 0x2000>, <0x01c26000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+               <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2A_PIPE_CLK>,
+               <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2A_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2a_pipe_clk";
+
+      #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ref_aux
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    ufs_mem_phy: phy@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0x1000>;
+
+        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        power-domains = <&gcc UFS_PHY_GDSC>;
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-usb3-uni-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: ref
+      - const: com_aux
+      - const: pipe
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@88ef000 {
+      compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+      reg = <0x088ef000 0x2000>;
+
+      clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+               <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+      clock-names = "aux", "ref", "com_aux", "pipe";
+
+      power-domains = <&gcc USB30_MP_GDSC>;
+
+      resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+               <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+      reset-names = "phy", "phy_phy";
+
+      vdda-phy-supply = <&vreg_l3a>;
+      vdda-pll-supply = <&vreg_l5a>;
+
+      #clock-cells = <0>;
+      clock-output-names = "usb2_phy0_pipe_clk";
+
+      #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP USB4-USB3-DP PHY controller (SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-usb43dp-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: ref
+      - const: com_aux
+      - const: usb3_pipe
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 1
+    description:
+      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+
+  "#phy-cells":
+    const: 1
+    description:
+      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    phy@88eb000 {
+      compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+      reg = <0x088eb000 0x4000>;
+
+      clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+               <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+      clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+      power-domains = <&gcc USB30_PRIM_GDSC>;
+
+      resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+               <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
+      reset-names = "phy", "common";
+
+      vdda-phy-supply = <&vreg_l9d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      #clock-cells = <1>;
+      #phy-cells = <1>;
+    };

Documentation/devicetree/bindings/phy/renesas,r8a779f0-ether-serdes.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,r8a779f0-ether-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet SERDES
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-serdes
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#phy-cells':
+    description: Port number of SERDES.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    phy@e6444000 {
+        compatible = "renesas,r8a779f0-ether-serdes";
+        reg = <0xe6444000 0xc00>;
+        clocks = <&cpg CPG_MOD 1506>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1506>;
+        #phy-cells = <1>;
+    };

Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml

@@ -54,6 +54,7 @@ properties:
       - ti,dm814-phy-gmii-sel
       - ti,am654-phy-gmii-sel
       - ti,j7200-cpsw5g-phy-gmii-sel
+      - ti,j721e-cpsw9g-phy-gmii-sel
 
   reg:
     maxItems: 1
@@ -63,14 +64,17 @@ properties:
   ti,qsgmii-main-ports:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
-      Required only for QSGMII mode. Array to select the port for
-      QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
-      ports automatically. Any one of the 4 CPSW5G ports can act as the
-      main port with the rest of them being the QSGMII_SUB ports.
-    maxItems: 1
+      Required only for QSGMII mode. Array to select the port/s for QSGMII
+      main mode. The size of the array corresponds to the number of QSGMII
+      interfaces and thus, the number of distinct QSGMII main ports,
+      supported by the device. If the device supports two QSGMII interfaces
+      but only one QSGMII interface is desired, repeat the QSGMII main port
+      value corresponding to the QSGMII interface in the array.
+    minItems: 1
+    maxItems: 2
     items:
       minimum: 1
-      maximum: 4
+      maximum: 8
 
 allOf:
   - if:
@@ -81,12 +85,43 @@ allOf:
               - ti,dra7xx-phy-gmii-sel
               - ti,dm814-phy-gmii-sel
               - ti,am654-phy-gmii-sel
+              - ti,j7200-cpsw5g-phy-gmii-sel
+              - ti,j721e-cpsw9g-phy-gmii-sel
     then:
       properties:
         '#phy-cells':
           const: 1
           description: CPSW port number (starting from 1)
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j7200-cpsw5g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          maxItems: 1
+          items:
+            minimum: 1
+            maximum: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j721e-cpsw9g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          minItems: 2
+          maxItems: 2
+          items:
+            minimum: 1
+            maximum: 8
+
   - if:
       not:
         properties:
@@ -94,6 +129,7 @@ allOf:
             contains:
               enum:
                 - ti,j7200-cpsw5g-phy-gmii-sel
+                - ti,j721e-cpsw9g-phy-gmii-sel
     then:
       properties:
         ti,qsgmii-main-ports: false

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -15,8 +15,10 @@ properties:
     enum:
       - ti,j721e-wiz-16g
       - ti,j721e-wiz-10g
+      - ti,j721s2-wiz-10g
       - ti,am64-wiz-10g
       - ti,j7200-wiz-10g
+      - ti,j784s4-wiz-10g
 
   power-domains:
     maxItems: 1

Documentation/driver-api/phy/phy.rst

@@ -94,7 +94,8 @@ Inorder to dereference the private data (in phy_ops), the phy provider driver
 can use phy_set_drvdata() after creating the PHY and use phy_get_drvdata() in
 phy_ops to get back the private data.
 
-4. Getting a reference to the PHY
+Getting a reference to the PHY
+==============================
 
 Before the controller can make use of the PHY, it has to get a reference to
 it. This framework provides the following APIs to get a reference to the PHY.
@@ -130,6 +131,28 @@ the phy_init() and phy_exit() calls, and phy_power_on() and
 phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
 phy is useful in devices for handling optional phy devices.
 
+Order of API calls
+==================
+
+The general order of calls should be::
+
+    [devm_][of_]phy_get()
+    phy_init()
+    phy_power_on()
+    [phy_set_mode[_ext]()]
+    ...
+    phy_power_off()
+    phy_exit()
+    [[of_]phy_put()]
+
+Some PHY drivers may not implement :c:func:`phy_init` or :c:func:`phy_power_on`,
+but controllers should always call these functions to be compatible with other
+PHYs. Some PHYs may require :c:func:`phy_set_mode <phy_set_mode_ext>`, while
+others may use a default mode (typically configured via devicetree or other
+firmware). For compatibility, you should always call this function if you know
+what mode you will be using. Generally, this function should be called after
+:c:func:`phy_power_on`, although some PHY drivers may allow it at any time.
+
 Releasing a reference to the PHY
 ================================
 

drivers/pci/controller/dwc/pcie-qcom-ep.c

@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mfd/syscon.h>
+#include <linux/phy/pcie.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
@@ -268,6 +269,10 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
 	if (ret)
 		goto err_disable_clk;
 
+	ret = phy_set_mode_ext(pcie_ep->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_EP);
+	if (ret)
+		goto err_phy_exit;
+
 	ret = phy_power_on(pcie_ep->phy);
 	if (ret)
 		goto err_phy_exit;

drivers/pci/controller/dwc/pcie-qcom.c

@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
+#include <linux/phy/pcie.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -1499,6 +1500,10 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 	if (ret)
 		return ret;
 
+	ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+	if (ret)
+		goto err_deinit;
+
 	ret = phy_power_on(pcie->phy);
 	if (ret)
 		goto err_deinit;

drivers/phy/allwinner/phy-sun4i-usb.c

@@ -120,6 +120,7 @@ struct sun4i_usb_phy_cfg {
 	u8 phyctl_offset;
 	bool dedicated_clocks;
 	bool phy0_dual_route;
+	bool needs_phy2_siddq;
 	int missing_phys;
 };
 
@@ -289,6 +290,50 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}
 
+	/* Some PHYs on some SoCs need the help of PHY2 to work. */
+	if (data->cfg->needs_phy2_siddq && phy->index != 2) {
+		struct sun4i_usb_phy *phy2 = &data->phys[2];
+
+		ret = clk_prepare_enable(phy2->clk);
+		if (ret) {
+			reset_control_assert(phy->reset);
+			clk_disable_unprepare(phy->clk2);
+			clk_disable_unprepare(phy->clk);
+			return ret;
+		}
+
+		ret = reset_control_deassert(phy2->reset);
+		if (ret) {
+			clk_disable_unprepare(phy2->clk);
+			reset_control_assert(phy->reset);
+			clk_disable_unprepare(phy->clk2);
+			clk_disable_unprepare(phy->clk);
+			return ret;
+		}
+
+		/*
+		 * This extra clock is just needed to access the
+		 * REG_HCI_PHY_CTL PMU register for PHY2.
+		 */
+		ret = clk_prepare_enable(phy2->clk2);
+		if (ret) {
+			reset_control_assert(phy2->reset);
+			clk_disable_unprepare(phy2->clk);
+			reset_control_assert(phy->reset);
+			clk_disable_unprepare(phy->clk2);
+			clk_disable_unprepare(phy->clk);
+			return ret;
+		}
+
+		if (phy2->pmu && data->cfg->hci_phy_ctl_clear) {
+			val = readl(phy2->pmu + REG_HCI_PHY_CTL);
+			val &= ~data->cfg->hci_phy_ctl_clear;
+			writel(val, phy2->pmu + REG_HCI_PHY_CTL);
+		}
+
+		clk_disable_unprepare(phy->clk2);
+	}
+
 	if (phy->pmu && data->cfg->hci_phy_ctl_clear) {
 		val = readl(phy->pmu + REG_HCI_PHY_CTL);
 		val &= ~data->cfg->hci_phy_ctl_clear;
@@ -354,6 +399,13 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 		data->phy0_init = false;
 	}
 
+	if (data->cfg->needs_phy2_siddq && phy->index != 2) {
+		struct sun4i_usb_phy *phy2 = &data->phys[2];
+
+		clk_disable_unprepare(phy2->clk);
+		reset_control_assert(phy2->reset);
+	}
+
 	sun4i_usb_phy_passby(phy, 0);
 	reset_control_assert(phy->reset);
 	clk_disable_unprepare(phy->clk2);
@@ -785,6 +837,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 				dev_err(dev, "failed to get clock %s\n", name);
 				return PTR_ERR(phy->clk2);
 			}
+		} else {
+			snprintf(name, sizeof(name), "pmu%d_clk", i);
+			phy->clk2 = devm_clk_get_optional(dev, name);
+			if (IS_ERR(phy->clk2)) {
+				dev_err(dev, "failed to get clock %s\n", name);
+				return PTR_ERR(phy->clk2);
+			}
 		}
 
 		snprintf(name, sizeof(name), "usb%d_reset", i);
@@ -973,6 +1032,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 	.missing_phys = BIT(1) | BIT(2),
 };
 
+static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
+	.num_phys = 4,
+	.type = sun50i_h6_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.phy0_dual_route = true,
+	.hci_phy_ctl_clear = PHY_CTL_SIDDQ,
+	.needs_phy2_siddq = true,
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -988,6 +1058,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);

drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c

@@ -18,14 +18,14 @@
 #define PIARBCTL_CAM			0x00
 #define PIARBCTL_SPLITTER		0x04
 #define PIARBCTL_MISC			0x08
-#define   PIARBCTL_MISC_SECURE_MASK			0x80000000
-#define   PIARBCTL_MISC_USB_SELECT_MASK			0x40000000
-#define   PIARBCTL_MISC_USB_4G_SDRAM_MASK		0x20000000
-#define   PIARBCTL_MISC_USB_PRIORITY_MASK		0x000f0000
-#define   PIARBCTL_MISC_USB_MEM_PAGE_MASK		0x0000f000
-#define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		0x00000f00
-#define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		0x000000f0
-#define   PIARBCTL_MISC_SATA_PRIORITY_MASK		0x0000000f
+#define   PIARBCTL_MISC_SATA_PRIORITY_MASK		GENMASK(3, 0)
+#define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		GENMASK(7, 4)
+#define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		GENMASK(11, 8)
+#define   PIARBCTL_MISC_USB_MEM_PAGE_MASK		GENMASK(15, 12)
+#define   PIARBCTL_MISC_USB_PRIORITY_MASK		GENMASK(19, 16)
+#define   PIARBCTL_MISC_USB_4G_SDRAM_MASK		BIT(29)
+#define   PIARBCTL_MISC_USB_SELECT_MASK			BIT(30)
+#define   PIARBCTL_MISC_SECURE_MASK			BIT(31)
 
 #define PIARBCTL_MISC_USB_ONLY_MASK		\
 	(PIARBCTL_MISC_USB_SELECT_MASK |	\
@@ -35,46 +35,47 @@
 
 /* Register definitions for the USB CTRL block */
 #define USB_CTRL_SETUP			0x00
-#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000
-#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000
-#define   USB_CTRL_SETUP_tca_drv_sel_MASK		0x01000000
-#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000
-#define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		0x00000200
-#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
-#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
+#define   USB_CTRL_SETUP_IOC_MASK			BIT(4)
+#define   USB_CTRL_SETUP_IPP_MASK			BIT(5)
+#define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		BIT(9)
+#define   USB_CTRL_SETUP_SCB1_EN_MASK			BIT(14)
+#define   USB_CTRL_SETUP_SCB2_EN_MASK			BIT(15)
+#define   USB_CTRL_SETUP_tca_drv_sel_MASK		BIT(24)
+#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		BIT(25)
 #define USB_CTRL_USB_PM			0x04
-#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000
-#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000
-#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000
-#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000
-#define   USB_CTRL_USB_PM_XHC_PME_EN_MASK		0x00000010
-#define   USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK	0x00000008
+#define   USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK	BIT(3)
+#define   USB_CTRL_USB_PM_XHC_PME_EN_MASK		BIT(4)
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		BIT(22)
+#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		BIT(23)
+#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		BIT(30)
+#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		BIT(31)
 #define USB_CTRL_USB_PM_STATUS		0x08
 #define USB_CTRL_USB_DEVICE_CTL1	0x10
-#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003
+#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	GENMASK(1, 0)
 #define USB_CTRL_TEST_PORT_CTL		0x30
-#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK	0x000000ff
+#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK		GENMASK(7, 0)
 #define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK	0x0000002e
 #define USB_CTRL_TP_DIAG1		0x34
-#define   USB_CTLR_TP_DIAG1_wake_MASK	0x00000002
+#define   USB_CTLR_TP_DIAG1_wake_MASK			BIT(1)
 #define USB_CTRL_CTLR_CSHCR		0x50
-#define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK	0x00040000
+#define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK		BIT(18)
 
 /* Register definitions for the USB_PHY block in 7211b0 */
 #define USB_PHY_PLL_CTL			0x00
-#define   USB_PHY_PLL_CTL_PLL_RESETB_MASK		0x40000000
+#define   USB_PHY_PLL_CTL_PLL_SUSPEND_MASK		BIT(27)
+#define   USB_PHY_PLL_CTL_PLL_RESETB_MASK		BIT(30)
 #define USB_PHY_PLL_LDO_CTL		0x08
-#define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		0x00000004
-#define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK	0x00000002
-#define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK	0x00000001
+#define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK	BIT(0)
+#define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK	BIT(1)
+#define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		BIT(2)
 #define USB_PHY_UTMI_CTL_1		0x04
-#define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
-#define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		0x0000000c
+#define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		GENMASK(3, 2)
 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
+#define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	BIT(11)
 #define USB_PHY_IDDQ			0x1c
-#define   USB_PHY_IDDQ_phy_iddq_MASK			0x00000001
+#define   USB_PHY_IDDQ_phy_iddq_MASK			BIT(0)
 #define USB_PHY_STATUS			0x20
-#define   USB_PHY_STATUS_pll_lock_MASK			0x00000001
+#define   USB_PHY_STATUS_pll_lock_MASK			BIT(0)
 
 /* Register definitions for the MDIO registers in the DWC2 block of
  * the 7211b0.
@@ -86,7 +87,7 @@
 
 /* Register definitions for the BDC EC block in 7211b0 */
 #define BDC_EC_AXIRDA			0x0c
-#define   BDC_EC_AXIRDA_RTS_MASK			0xf0000000
+#define   BDC_EC_AXIRDA_RTS_MASK			GENMASK(31, 28)
 #define   BDC_EC_AXIRDA_RTS_SHIFT			28
 
 
@@ -195,10 +196,10 @@ static void usb_init_common(struct brcm_usb_init_params *params)
 	if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
 		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 		reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
-		reg |= params->mode;
+		reg |= params->port_mode;
 		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	}
-	switch (params->mode) {
+	switch (params->supported_port_modes) {
 	case USB_CTLR_MODE_HOST:
 		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
 		break;
@@ -259,6 +260,11 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 		brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 	}
 
+	/* Disable PLL auto suspend */
+	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
+	reg |= USB_PHY_PLL_CTL_PLL_SUSPEND_MASK;
+	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
+
 	/* Init the PHY */
 	reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
 		USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
@@ -276,7 +282,7 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 	/* Set the PHY_MODE */
 	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 	reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
-	reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
+	reg |= params->supported_port_modes << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 
 	usb_init_common(params);
@@ -286,7 +292,7 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 	 * the default "Read Transaction Size" of 6 (1024 bytes).
 	 * Set it to 4 (256 bytes).
 	 */
-	if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
+	if ((params->supported_port_modes != USB_CTLR_MODE_HOST) && bdc_ec) {
 		reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
 		reg &= ~BDC_EC_AXIRDA_RTS_MASK;
 		reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
@@ -331,13 +337,12 @@ static void usb_uninit_common_7216(struct brcm_usb_init_params *params)
 
 	pr_debug("%s\n", __func__);
 
-	if (!params->wake_enabled) {
-		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
-
+	if (params->wake_enabled) {
 		/* Switch to using slower clock during suspend to save power */
 		USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
-	} else {
 		usb_wake_enable_7216(params, true);
+	} else {
+		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
 	}
 }
 
@@ -385,7 +390,7 @@ static int usb_get_dual_select(struct brcm_usb_init_params *params)
 	return reg;
 }
 
-static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
+static void usb_set_dual_select(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	u32 reg;
@@ -394,7 +399,7 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
 
 	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
-	reg |= mode;
+	reg |= params->port_mode;
 	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 }
 
@@ -425,7 +430,6 @@ void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
 
 	params->family_name = "7216";
 	params->ops = &bcm7216_ops;
-	params->suspend_with_clocks = true;
 }
 
 void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
@@ -435,5 +439,4 @@ void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
 
 	params->family_name = "7211";
 	params->ops = &bcm7211b0_ops;
-	params->suspend_with_clocks = true;
 }

drivers/phy/broadcom/phy-brcm-usb-init.c

@@ -21,57 +21,57 @@
 
 /* Register definitions for the USB CTRL block */
 #define USB_CTRL_SETUP			0x00
-#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
-#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
-#define   USB_CTRL_SETUP_BABO_MASK			0x00000001
-#define   USB_CTRL_SETUP_FNHW_MASK			0x00000002
-#define   USB_CTRL_SETUP_FNBO_MASK			0x00000004
-#define   USB_CTRL_SETUP_WABO_MASK			0x00000008
-#define   USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK		0x00002000 /* option */
-#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000 /* option */
-#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000 /* option */
-#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK		0X00020000 /* option */
-#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK	0x00010000 /* option */
-#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000 /* option */
-#define   USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK	0x04000000 /* option */
-#define   USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK 0x08000000 /* opt */
-#define   USB_CTRL_SETUP_OC3_DISABLE_MASK		0xc0000000 /* option */
+#define   USB_CTRL_SETUP_BABO_MASK			BIT(0)
+#define   USB_CTRL_SETUP_FNHW_MASK			BIT(1)
+#define   USB_CTRL_SETUP_FNBO_MASK			BIT(2)
+#define   USB_CTRL_SETUP_WABO_MASK			BIT(3)
+#define   USB_CTRL_SETUP_IOC_MASK			BIT(4)
+#define   USB_CTRL_SETUP_IPP_MASK			BIT(5)
+#define   USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK		BIT(13) /* option */
+#define   USB_CTRL_SETUP_SCB1_EN_MASK			BIT(14) /* option */
+#define   USB_CTRL_SETUP_SCB2_EN_MASK			BIT(15) /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK		BIT(17) /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK	BIT(16) /* option */
+#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		BIT(25) /* option */
+#define   USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK	BIT(26) /* option */
+#define   USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK BIT(27) /* opt */
+#define   USB_CTRL_SETUP_OC3_DISABLE_MASK		GENMASK(31, 30) /* option */
 #define USB_CTRL_PLL_CTL		0x04
-#define   USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK		0x08000000
-#define   USB_CTRL_PLL_CTL_PLL_RESETB_MASK		0x40000000
-#define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK		0x80000000 /* option */
+#define   USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK		BIT(27)
+#define   USB_CTRL_PLL_CTL_PLL_RESETB_MASK		BIT(30)
+#define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK		BIT(31) /* option */
 #define USB_CTRL_EBRIDGE		0x0c
-#define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK		0x00020000 /* option */
-#define   USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK		0x00000f80 /* option */
+#define   USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK		GENMASK(11, 7) /* option */
+#define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK		BIT(17) /* option */
 #define USB_CTRL_OBRIDGE		0x10
-#define   USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK		0x08000000
+#define   USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK		BIT(27)
 #define USB_CTRL_MDIO			0x14
 #define USB_CTRL_MDIO2			0x18
 #define USB_CTRL_UTMI_CTL_1		0x2c
-#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
-#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK	0x08000000
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	BIT(11)
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK	BIT(27)
 #define USB_CTRL_USB_PM			0x34
-#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000 /* option */
-#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000 /* option */
-#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK	0x40000000 /* option */
-#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000 /* option */
-#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000 /* option */
-#define   USB_CTRL_USB_PM_USB20_HC_RESETB_MASK		0x30000000 /* option */
-#define   USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK	0x00300000 /* option */
-#define   USB_CTRL_USB_PM_RMTWKUP_EN_MASK		0x00000001
+#define   USB_CTRL_USB_PM_RMTWKUP_EN_MASK		BIT(0)
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK	GENMASK(21, 20) /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		BIT(22) /* option */
+#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		BIT(23) /* option */
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_MASK		GENMASK(29, 28) /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK	BIT(30) /* option */
+#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		BIT(30) /* option */
+#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		BIT(31) /* option */
 #define USB_CTRL_USB_PM_STATUS		0x38
 #define USB_CTRL_USB30_CTL1		0x60
-#define   USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK	0x00000010
-#define   USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK		0x00010000
-#define   USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK	0x00020000 /* option */
-#define   USB_CTRL_USB30_CTL1_USB3_IOC_MASK		0x10000000 /* option */
-#define   USB_CTRL_USB30_CTL1_USB3_IPP_MASK		0x20000000 /* option */
+#define   USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK	BIT(4)
+#define   USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK		BIT(16)
+#define   USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK	BIT(17) /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IOC_MASK		BIT(28) /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IPP_MASK		BIT(29) /* option */
 #define USB_CTRL_USB30_PCTL		0x70
-#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK	0x00000002
-#define   USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK	0x00008000
-#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK	0x00020000
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK	BIT(1)
+#define   USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK	BIT(15)
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK	BIT(17)
 #define USB_CTRL_USB_DEVICE_CTL1	0x90
-#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003 /* option */
+#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	GENMASK(1, 0) /* option */
 
 /* Register definitions for the XHCI EC block */
 #define USB_XHCI_EC_IRAADR 0x658
@@ -876,11 +876,11 @@ static void usb_init_common(struct brcm_usb_init_params *params)
 		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
 					PORT_MODE);
-		reg |= params->mode;
+		reg |= params->port_mode;
 		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	}
 	if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
-		switch (params->mode) {
+		switch (params->supported_port_modes) {
 		case USB_CTLR_MODE_HOST:
 			USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
 			break;
@@ -891,7 +891,7 @@ static void usb_init_common(struct brcm_usb_init_params *params)
 		}
 	}
 	if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) {
-		if (params->mode == USB_CTLR_MODE_TYPEC_PD)
+		if (params->supported_port_modes == USB_CTLR_MODE_TYPEC_PD)
 			USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE);
 		else
 			USB_CTRL_UNSET_FAMILY(params, SETUP,
@@ -1000,7 +1000,7 @@ static int usb_get_dual_select(struct brcm_usb_init_params *params)
 	return reg;
 }
 
-static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
+static void usb_set_dual_select(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	u32 reg;
@@ -1011,7 +1011,7 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
 		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
 					PORT_MODE);
-		reg |= mode;
+		reg |= params->port_mode;
 		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	}
 }

drivers/phy/broadcom/phy-brcm-usb-init.h

@@ -45,14 +45,15 @@ struct brcm_usb_init_ops {
 	void (*uninit_eohci)(struct brcm_usb_init_params *params);
 	void (*uninit_xhci)(struct brcm_usb_init_params *params);
 	int  (*get_dual_select)(struct brcm_usb_init_params *params);
-	void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
+	void (*set_dual_select)(struct brcm_usb_init_params *params);
 };
 
 struct  brcm_usb_init_params {
 	void __iomem *regs[BRCM_REGS_MAX];
 	int ioc;
 	int ipp;
-	int mode;
+	int supported_port_modes;
+	int port_mode;
 	u32 family_id;
 	u32 product_id;
 	int selected_family;
@@ -61,7 +62,6 @@ struct  brcm_usb_init_params {
 	const struct brcm_usb_init_ops *ops;
 	struct regmap *syscon_piarbctl;
 	bool wake_enabled;
-	bool suspend_with_clocks;
 };
 
 void brcm_usb_dvr_init_4908(struct brcm_usb_init_params *params);
@@ -153,11 +153,10 @@ static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
 	return 0;
 }
 
-static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini,
-	int mode)
+static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini)
 {
 	if (ini->ops->set_dual_select)
-		ini->ops->set_dual_select(ini, mode);
+		ini->ops->set_dual_select(ini);
 }
 
 #endif /* _USB_BRCM_COMMON_INIT_H */

drivers/phy/broadcom/phy-brcm-usb.c

@@ -102,9 +102,9 @@ static int brcm_pm_notifier(struct notifier_block *notifier,
 
 static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
 {
-	struct phy *gphy = dev_id;
+	struct device *dev = dev_id;
 
-	pm_wakeup_event(&gphy->dev, 0);
+	pm_wakeup_event(dev, 0);
 
 	return IRQ_HANDLED;
 }
@@ -233,7 +233,7 @@ static ssize_t dr_mode_show(struct device *dev,
 	return sprintf(buf, "%s\n",
 		value_to_name(&brcm_dr_mode_to_name[0],
 			      ARRAY_SIZE(brcm_dr_mode_to_name),
-			      priv->ini.mode));
+			      priv->ini.supported_port_modes));
 }
 static DEVICE_ATTR_RO(dr_mode);
 
@@ -249,7 +249,8 @@ static ssize_t dual_select_store(struct device *dev,
 	res = name_to_value(&brcm_dual_mode_to_name[0],
 			    ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
 	if (!res) {
-		brcm_usb_set_dual_select(&priv->ini, value);
+		priv->ini.port_mode = value;
+		brcm_usb_set_dual_select(&priv->ini);
 		res = len;
 	}
 	mutex_unlock(&sysfs_lock);
@@ -445,13 +446,13 @@ static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
 		priv->suspend_clk = NULL;
 	}
 
-	priv->wake_irq = platform_get_irq_byname(pdev, "wake");
+	priv->wake_irq = platform_get_irq_byname_optional(pdev, "wake");
 	if (priv->wake_irq < 0)
-		priv->wake_irq = platform_get_irq_byname(pdev, "wakeup");
+		priv->wake_irq = platform_get_irq_byname_optional(pdev, "wakeup");
 	if (priv->wake_irq >= 0) {
 		err = devm_request_irq(dev, priv->wake_irq,
 				       brcm_usb_phy_wake_isr, 0,
-				       dev_name(dev), gphy);
+				       dev_name(dev), dev);
 		if (err < 0)
 			return err;
 		device_set_wakeup_capable(dev, 1);
@@ -495,13 +496,16 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
 	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
 
-	priv->ini.mode = USB_CTLR_MODE_HOST;
+	priv->ini.supported_port_modes = USB_CTLR_MODE_HOST;
 	err = of_property_read_string(dn, "dr_mode", &mode);
 	if (err == 0) {
 		name_to_value(&brcm_dr_mode_to_name[0],
 			      ARRAY_SIZE(brcm_dr_mode_to_name),
-			mode, &priv->ini.mode);
+			mode, &priv->ini.supported_port_modes);
 	}
+	/* Default port_mode to supported port_modes */
+	priv->ini.port_mode = priv->ini.supported_port_modes;
+
 	if (of_property_read_bool(dn, "brcm,has-xhci"))
 		priv->has_xhci = true;
 	if (of_property_read_bool(dn, "brcm,has-eohci"))
@@ -539,7 +543,7 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
 	 * Create sysfs entries for mode.
 	 * Remove "dual_select" attribute if not in dual mode
 	 */
-	if (priv->ini.mode != USB_CTLR_MODE_DRD)
+	if (priv->ini.supported_port_modes != USB_CTLR_MODE_DRD)
 		brcm_usb_phy_attrs[1] = NULL;
 	err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
 	if (err)
@@ -598,7 +602,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
 		 * and newer XHCI->2.0-clks/3.0-clks.
 		 */
 
-		if (!priv->ini.suspend_with_clocks) {
+		if (!priv->ini.wake_enabled) {
 			if (priv->phys[BRCM_USB_PHY_3_0].inited)
 				clk_disable_unprepare(priv->usb_30_clk);
 			if (priv->phys[BRCM_USB_PHY_2_0].inited ||
@@ -615,8 +619,10 @@ static int brcm_usb_phy_resume(struct device *dev)
 {
 	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
 
-	clk_prepare_enable(priv->usb_20_clk);
-	clk_prepare_enable(priv->usb_30_clk);
+	if (!priv->ini.wake_enabled) {
+		clk_prepare_enable(priv->usb_20_clk);
+		clk_prepare_enable(priv->usb_30_clk);
+	}
 	brcm_usb_init_ipp(&priv->ini);
 
 	/*

drivers/phy/freescale/phy-fsl-imx8m-pcie.c

@@ -11,6 +11,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -31,12 +32,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -47,16 +46,28 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
+struct imx8_pcie_phy_drvdata {
+	const	char			*gpr;
+	enum	imx8_pcie_phy_type	variant;
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
 	struct clk		*clk;
 	struct phy		*phy;
 	struct regmap		*iomuxc_gpr;
+	struct reset_control	*perst;
 	struct reset_control	*reset;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	const struct imx8_pcie_phy_drvdata	*drvdata;
 };
 
 static int imx8_pcie_phy_power_on(struct phy *phy)
@@ -65,34 +76,22 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
 	u32 val, pad_mode;
 	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
 
-	reset_control_assert(imx8_phy->reset);
-
 	pad_mode = imx8_phy->refclk_pad_mode;
-	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
-			   imx8_phy->clkreq_unused ?
-			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN,
-			   IMX8MM_GPR_PCIE_AUX_EN);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_SSC_EN, 0);
-
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
-			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
-			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
-			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
-	usleep_range(100, 200);
-
-	/* Do the PHY common block reset */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_CMN_RST,
-			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
+	switch (imx8_phy->drvdata->variant) {
+	case IMX8MM:
+		reset_control_assert(imx8_phy->reset);
+
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP: /* Do nothing. */
+		break;
+	}
 
 	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
 	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -120,20 +119,44 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
 		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
+
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
 
-	reset_control_deassert(imx8_phy->reset);
+	switch (imx8_phy->drvdata->variant) {
+	case IMX8MP:
+		reset_control_deassert(imx8_phy->perst);
+		fallthrough;
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+	}
 
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -160,6 +183,23 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
+	.gpr = "fsl,imx8mm-iomuxc-gpr",
+	.variant = IMX8MM,
+};
+
+static const struct imx8_pcie_phy_drvdata imx8mp_drvdata = {
+	.gpr = "fsl,imx8mp-iomuxc-gpr",
+	.variant = IMX8MP,
+};
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = &imx8mp_drvdata, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
@@ -172,6 +212,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->drvdata = of_device_get_match_data(dev);
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -197,7 +239,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 
 	/* Grab GPR config register range */
 	imx8_phy->iomuxc_gpr =
-		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+		 syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
 	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
 		dev_err(dev, "unable to find iomuxc registers\n");
 		return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -209,6 +251,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(imx8_phy->reset);
 	}
 
+	if (imx8_phy->drvdata->variant == IMX8MP) {
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst))
+			dev_err_probe(dev, PTR_ERR(imx8_phy->perst),
+				      "Failed to get PCIE PHY PERST control\n");
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(imx8_phy->base))
@@ -225,12 +275,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {

drivers/phy/marvell/phy-mmp3-hsic.c

@@ -41,12 +41,10 @@ static int mmp3_hsic_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct phy_provider *provider;
-	struct resource *resource;
 	void __iomem *base;
 	struct phy *phy;
 
-	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, resource);
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 

drivers/phy/marvell/phy-mvebu-a3700-comphy.c

@@ -826,6 +826,9 @@ mvebu_a3700_comphy_usb3_power_on(struct mvebu_a3700_comphy_lane *lane)
 	if (ret)
 		return ret;
 
+	/* COMPHY register reset (cleared automatically) */
+	comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST);
+
 	/*
 	 * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
 	 * register belong to UTMI module, so it is set in UTMI phy driver.

drivers/phy/qualcomm/Kconfig

@@ -54,6 +54,7 @@ config PHY_QCOM_QMP
 	tristate "Qualcomm QMP PHY Driver"
 	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
 	select GENERIC_PHY
+	select MFD_SYSCON
 	help
 	  Enable this to support the QMP PHY transceiver that is used
 	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.

drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c

@@ -20,8 +20,6 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/phy/phy.h>
-
 #include "phy-qcom-qmp.h"
 
 /* QPHY_SW_RESET bit */
@@ -35,22 +33,16 @@
 #define PLL_READY_GATE_EN			BIT(3)
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
-#define PHYSTATUS_4_20				BIT(7)
 /* QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 #define POWER_DOWN_DELAY_US_MIN			10
-#define POWER_DOWN_DELAY_US_MAX			11
+#define POWER_DOWN_DELAY_US_MAX			20
 
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
-	/*
-	 * register part of layout ?
-	 * if yes, then offset gives index in the reg-layout
-	 */
-	bool in_layout;
 	/*
 	 * mask of lanes for which this register is written
 	 * for cases when second lane needs different values
@@ -65,14 +57,6 @@ struct qmp_phy_init_tbl {
 		.lane_mask = 0xff,	\
 	}
 
-#define QMP_PHY_INIT_CFG_L(o, v)	\
-	{				\
-		.offset = o,		\
-		.val = v,		\
-		.in_layout = true,	\
-		.lane_mask = 0xff,	\
-	}
-
 #define QMP_PHY_INIT_CFG_LANE(o, v, l)	\
 	{				\
 		.offset = o,		\
@@ -91,7 +75,6 @@ enum qphy_reg_layout {
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
 	QPHY_PCS_STATUS,
-	QPHY_PCS_POWER_DOWN_CONTROL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };
@@ -211,18 +194,6 @@ struct qmp_phy_cfg {
 
 	/* array of registers with different offsets */
 	const unsigned int *regs;
-
-	unsigned int start_ctrl;
-	unsigned int pwrdn_ctrl;
-	unsigned int mask_com_pcs_ready;
-	/* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
-	unsigned int phy_status;
-
-	/* true, if PHY needs delay after POWER_DOWN */
-	bool has_pwrdn_delay;
-	/* power_down delay in usec */
-	int pwrdn_delay_min;
-	int pwrdn_delay_max;
 };
 
 /**
@@ -335,19 +306,9 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= pciephy_regs_layout,
-
-	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
-	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_com_pcs_ready	= PCS_READY,
-	.phy_status		= PHYSTATUS,
-
-	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
-	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
 static void qmp_pcie_msm8996_configure_lane(void __iomem *base,
-					const unsigned int *regs,
 					const struct qmp_phy_init_tbl tbl[],
 					int num,
 					u8 lane_mask)
@@ -362,19 +323,15 @@ static void qmp_pcie_msm8996_configure_lane(void __iomem *base,
 		if (!(t->lane_mask & lane_mask))
 			continue;
 
-		if (t->in_layout)
-			writel(t->val, base + regs[t->offset]);
-		else
-			writel(t->val, base + t->offset);
+		writel(t->val, base + t->offset);
 	}
 }
 
 static void qmp_pcie_msm8996_configure(void __iomem *base,
-				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
 				   int num)
 {
-	qmp_pcie_msm8996_configure_lane(base, regs, tbl, num, 0xff);
+	qmp_pcie_msm8996_configure_lane(base, tbl, num, 0xff);
 }
 
 static int qmp_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
@@ -385,19 +342,17 @@ static int qmp_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
 	const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
 	int serdes_tbl_num = cfg->serdes_tbl_num;
 	void __iomem *status;
-	unsigned int mask, val;
+	unsigned int val;
 	int ret;
 
-	qmp_pcie_msm8996_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+	qmp_pcie_msm8996_configure(serdes, serdes_tbl, serdes_tbl_num);
 
 	qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
 	qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
 		     SERDES_START | PCS_START);
 
 	status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
-	mask = cfg->mask_com_pcs_ready;
-
-	ret = readl_poll_timeout(status, val, (val & mask), 10,
+	ret = readl_poll_timeout(status, val, (val & PCS_READY), 200,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev,
@@ -421,7 +376,6 @@ static int qmp_pcie_msm8996_com_init(struct qmp_phy *qphy)
 		return 0;
 	}
 
-	/* turn on regulator supplies */
 	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
 	if (ret) {
 		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
@@ -514,7 +468,7 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
 	void __iomem *rx = qphy->rx;
 	void __iomem *pcs = qphy->pcs;
 	void __iomem *status;
-	unsigned int mask, val, ready;
+	unsigned int val;
 	int ret;
 
 	qmp_pcie_msm8996_serdes_init(qphy);
@@ -533,34 +487,28 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_pcie_msm8996_configure_lane(tx, cfg->regs, cfg->tx_tbl,
-					cfg->tx_tbl_num, 1);
-
-	qmp_pcie_msm8996_configure_lane(rx, cfg->regs, cfg->rx_tbl,
-					cfg->rx_tbl_num, 1);
-
-	qmp_pcie_msm8996_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_pcie_msm8996_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_pcie_msm8996_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_pcie_msm8996_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	/*
 	 * Pull out PHY from POWER DOWN state.
 	 * This is active low enable signal to power-down PHY.
 	 */
-	qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+	qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
+			SW_PWRDN | REFCLK_DRV_DSBL);
 
-	if (cfg->has_pwrdn_delay)
-		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+	usleep_range(POWER_DOWN_DELAY_US_MIN, POWER_DOWN_DELAY_US_MAX);
 
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
 	/* start SerDes and Phy-Coding-Sublayer */
-	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL],
+			PCS_START | PLL_READY_GATE_EN);
 
 	status = pcs + cfg->regs[QPHY_PCS_STATUS];
-	mask = cfg->phy_status;
-	ready = 0;
-
-	ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+	ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev, "phy initialization timed-out\n");
@@ -588,16 +536,12 @@ static int qmp_pcie_msm8996_power_off(struct phy *phy)
 	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
 	/* stop SerDes and Phy-Coding-Sublayer */
-	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+			SERDES_START | PCS_START);
 
 	/* Put PHY into POWER DOWN state: active low */
-	if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
-		qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-			     cfg->pwrdn_ctrl);
-	} else {
-		qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
-				cfg->pwrdn_ctrl);
-	}
+	qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
+			SW_PWRDN | REFCLK_DRV_DSBL);
 
 	return 0;
 }
@@ -777,7 +721,7 @@ static int qmp_pcie_msm8996_create(struct device *dev, struct device_node *np, i
 	qphy->cfg = cfg;
 	qphy->serdes = serdes;
 	/*
-	 * Get memory resources for each phy lane:
+	 * Get memory resources for each PHY:
 	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
 	 */
 	qphy->tx = devm_of_iomap(dev, np, 0, NULL);
@@ -851,12 +795,10 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 	qmp->dev = dev;
 	dev_set_drvdata(dev, qmp);
 
-	/* Get the specific init parameters of QMP phy */
 	cfg = of_device_get_match_data(dev);
 	if (!cfg)
 		return -EINVAL;
 
-	/* per PHY serdes; usually located at base address */
 	serdes = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(serdes))
 		return PTR_ERR(serdes);
@@ -875,8 +817,7 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 
 	ret = qmp_pcie_msm8996_vreg_init(dev, cfg);
 	if (ret)
-		return dev_err_probe(dev, ret,
-				     "failed to get regulator supplies\n");
+		return ret;
 
 	num = of_get_available_child_count(dev->of_node);
 	/* do we have a rogue child node ? */

drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h

@@ -8,6 +8,8 @@
 #define QCOM_PHY_QMP_PCS_PCIE_V5_H_
 
 /* Only for QMP V5 PHY - PCS_PCIE registers */
+#define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG2		0x0c
+#define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG4		0x14
 #define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x20
 #define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x54
 #define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS		0x94

drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h

@@ -8,8 +8,10 @@
 
 /* Only for QMP V5_20 PHY - PCIe PCS registers */
 #define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE	0x01c
+#define QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5	0x084
 #define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS		0x090
 #define QPHY_V5_20_PCS_PCIE_EQ_CONFIG1			0x0a0
+#define QPHY_V5_20_PCS_PCIE_PRESET_P10_POST		0x0e0
 #define QPHY_V5_20_PCS_PCIE_G4_EQ_CONFIG5		0x108
 #define QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN			0x15c
 #define QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3	0x184

drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V5_20_H_
+#define QCOM_PHY_QMP_PCS_V5_20_H_
+
+#define QPHY_V5_20_PCS_G3S2_PRE_GAIN			0x170
+#define QPHY_V5_20_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_V5_20_PCS_EQ_CONFIG4			0x1e0
+#define QPHY_V5_20_PCS_EQ_CONFIG5			0x1e4
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -38,6 +38,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v4_20.h"
 
 #include "phy-qcom-qmp-pcs-v5.h"
+#include "phy-qcom-qmp-pcs-v5_20.h"
 #include "phy-qcom-qmp-pcs-pcie-v5.h"
 #include "phy-qcom-qmp-pcs-usb-v5.h"
 #include "phy-qcom-qmp-pcs-ufs-v5.h"

drivers/phy/renesas/Kconfig

@@ -2,6 +2,14 @@
 #
 # Phy drivers for Renesas platforms
 #
+# NOTE: Please sorted config names alphabetically.
+config PHY_R8A779F0_ETHERNET_SERDES
+	tristate "Renesas R-Car S4-8 Ethernet SERDES driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Support for Ethernet SERDES found on Renesas R-Car S4-8 SoCs.
+
 config PHY_RCAR_GEN2
 	tristate "Renesas R-Car generation 2 USB PHY driver"
 	depends on ARCH_RENESAS

drivers/phy/renesas/Makefile

 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_R8A779F0_ETHERNET_SERDES)	+= r8a779f0-ether-serdes.o
 obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3_PCIE)	+= phy-rcar-gen3-pcie.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o

drivers/phy/tegra/phy-tegra194-p2u.c

@@ -15,6 +15,7 @@
 #include <linux/phy/phy.h>
 
 #define P2U_CONTROL_CMN			0x74
+#define P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE		BIT(13)
 #define P2U_CONTROL_CMN_SKP_SIZE_PROTECTION_EN			BIT(20)
 
 #define P2U_PERIODIC_EQ_CTRL_GEN3	0xc0
@@ -85,8 +86,21 @@ static int tegra_p2u_power_on(struct phy *x)
 	return 0;
 }
 
+static int tegra_p2u_calibrate(struct phy *x)
+{
+	struct tegra_p2u *phy = phy_get_drvdata(x);
+	u32 val;
+
+	val = p2u_readl(phy, P2U_CONTROL_CMN);
+	val |= P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE;
+	p2u_writel(phy, val, P2U_CONTROL_CMN);
+
+	return 0;
+}
+
 static const struct phy_ops ops = {
 	.power_on = tegra_p2u_power_on,
+	.calibrate = tegra_p2u_calibrate,
 	.owner = THIS_MODULE,
 };
 

drivers/phy/tegra/xusb-tegra124.c

@@ -1652,7 +1652,6 @@ tegra124_usb3_port_map(struct tegra_xusb_port *port)
 
 static const struct tegra_xusb_port_ops tegra124_usb3_port_ops = {
 	.release = tegra_xusb_usb3_port_release,
-	.remove = tegra_xusb_usb3_port_remove,
 	.enable = tegra124_usb3_port_enable,
 	.disable = tegra124_usb3_port_disable,
 	.map = tegra124_usb3_port_map,

drivers/phy/tegra/xusb-tegra186.c

@@ -1185,7 +1185,6 @@ tegra186_usb3_port_map(struct tegra_xusb_port *port)
 
 static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = {
 	.release = tegra_xusb_usb3_port_release,
-	.remove = tegra_xusb_usb3_port_remove,
 	.enable = tegra186_usb3_port_enable,
 	.disable = tegra186_usb3_port_disable,
 	.map = tegra186_usb3_port_map,

drivers/phy/tegra/xusb-tegra210.c

@@ -3078,7 +3078,6 @@ tegra210_usb3_port_map(struct tegra_xusb_port *port)
 
 static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
 	.release = tegra_xusb_usb3_port_release,
-	.remove = tegra_xusb_usb3_port_remove,
 	.enable = tegra210_usb3_port_enable,
 	.disable = tegra210_usb3_port_disable,
 	.map = tegra210_usb3_port_map,

drivers/phy/tegra/xusb.c

@@ -954,8 +954,7 @@ static int tegra_xusb_usb3_port_parse_dt(struct tegra_xusb_usb3_port *usb3)
 			return -EINVAL;
 	}
 
-	usb3->supply = regulator_get(&port->dev, "vbus");
-	return PTR_ERR_OR_ZERO(usb3->supply);
+	return 0;
 }
 
 static int tegra_xusb_add_usb3_port(struct tegra_xusb_padctl *padctl,
@@ -1012,13 +1011,6 @@ void tegra_xusb_usb3_port_release(struct tegra_xusb_port *port)
 	kfree(usb3);
 }
 
-void tegra_xusb_usb3_port_remove(struct tegra_xusb_port *port)
-{
-	struct tegra_xusb_usb3_port *usb3 = to_usb3_port(port);
-
-	regulator_put(usb3->supply);
-}
-
 static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_port *port, *tmp;

drivers/phy/tegra/xusb.h

@@ -359,7 +359,6 @@ void tegra_xusb_hsic_port_release(struct tegra_xusb_port *port);
 
 struct tegra_xusb_usb3_port {
 	struct tegra_xusb_port base;
-	struct regulator *supply;
 	bool context_saved;
 	unsigned int port;
 	bool internal;
@@ -381,7 +380,6 @@ struct tegra_xusb_usb3_port *
 tegra_xusb_find_usb3_port(struct tegra_xusb_padctl *padctl,
 			  unsigned int index);
 void tegra_xusb_usb3_port_release(struct tegra_xusb_port *port);
-void tegra_xusb_usb3_port_remove(struct tegra_xusb_port *port);
 
 struct tegra_xusb_port_ops {
 	void (*release)(struct tegra_xusb_port *port);

include/dt-bindings/phy/phy-qcom-qmp.h

+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Qualcomm QMP PHY constants
+ *
+ * Copyright (C) 2022 Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_PHY_QMP
+#define _DT_BINDINGS_PHY_QMP
+
+/* QMP USB4-USB3-DP clocks */
+#define QMP_USB43DP_USB3_PIPE_CLK	0
+#define QMP_USB43DP_DP_LINK_CLK		1
+#define QMP_USB43DP_DP_VCO_DIV_CLK	2
+
+/* QMP USB4-USB3-DP PHYs */
+#define QMP_USB43DP_USB3_PHY		0
+#define QMP_USB43DP_DP_PHY		1
+
+#endif /* _DT_BINDINGS_PHY_QMP */