Commit ea4409cc authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'omap-for-v3.19/dt-part2-updated' of...

Merge tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "More dts changes for omaps to add support for new devices" from Tony Lindgren:

- Add DCAN support am335x, am437x and dra7

- Add devices for sb-t3x computers

- Add support for NovaTech OrionLXm

- Add n900 battery and si4713 support

* tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: dts: am335x-evm: Add DCAN1 details
  ARM: dts: am33xx: Update DCAN nodes
  ARM: dts: am33xx: Add control module syscon node
  ARM: dts: am437x-gp: Add dcan support
  ARM: dts: am4372: Add DCAN nodes
  ARM: dts: am4372: Add control module syscon node
  ARM: dts: dra72-evm: Add CAN support
  ARM: dts: dra7-evm: Add CAN support
  ARM: dts: DRA7: Add DCAN nodes
  ARM: dts: dra7: Add syscon regmap for CORE CONTROL area
  ARM: dts: sbc-t3x30: add audio support
  ARM: dts: sbc-t3x: add TV out display alias
  ARM: dts: cm-t3x: add TV out support
  ARM: dts: cm-t3x: add I2C1 pinmux
  ARM: dts: AM43xx: add tscadc DT entries for am437x-evm and am43x-epos-evm
  ARM: dts: cm-t3x30: add keypad support
  ARM: dts: sb-t35: add EEPROM support
  ARM: dts: cm-t3x: add EEPROM support
  ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk
  ARM: dts: cm-t3x: add ADS7846 touchscreen support
  ...
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents bcc8cef7 f80ecaf5
...@@ -132,6 +132,9 @@ Boards: ...@@ -132,6 +132,9 @@ Boards:
- AM335X Bone : Low cost community board - AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
- AM335X OrionLXm : Substation Automation Platform
compatible = "novatech,am335x-lxm", "ti,am33xx"
- OMAP5 EVM : Evaluation Module - OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5" compatible = "ti,omap5-evm", "ti,omap5"
......
...@@ -342,7 +342,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ ...@@ -342,7 +342,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
am335x-evm.dtb \ am335x-evm.dtb \
am335x-evmsk.dtb \ am335x-evmsk.dtb \
am335x-nano.dtb \ am335x-nano.dtb \
am335x-pepper.dtb am335x-pepper.dtb \
am335x-lxm.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
omap4-panda.dtb \ omap4-panda.dtb \
omap4-panda-a4.dtb \ omap4-panda-a4.dtb \
......
...@@ -307,6 +307,13 @@ am335x_evm_audio_pins: am335x_evm_audio_pins { ...@@ -307,6 +307,13 @@ am335x_evm_audio_pins: am335x_evm_audio_pins {
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>; >;
}; };
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
}; };
&uart0 { &uart0 {
...@@ -664,3 +671,9 @@ &sham { ...@@ -664,3 +671,9 @@ &sham {
&aes { &aes {
status = "okay"; status = "okay";
}; };
&dcan1 {
status = "disabled"; /* Enable only if Profile 1 is selected */
pinctrl-names = "default";
pinctrl-0 = <&dcan1_pins_default>;
};
/*
* Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am33xx.dtsi"
/ {
model = "NovaTech OrionLXm";
compatible = "novatech,am335x-lxm", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
/* Power supply provides a fixed 5V @2A */
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
/* Slave 2 */
0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
/* Slave 2 reset value*/
0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
serial_config1: serial_config1@20 {
compatible = "nxp,pca9539";
reg = <0x20>;
};
serial_config2: serial_config2@21 {
compatible = "nxp,pca9539";
reg = <0x21>;
};
tps: tps@2d {
compatible = "ti,tps65910";
reg = <0x2d>;
};
};
/include/ "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
regulators {
/* vrtc - unused */
vio_reg: regulator@1 {
regulator-name = "vio_1v5,ddr";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vdd1_reg: regulator@2 {
regulator-name = "vdd1,mpu";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
regulator-name = "vdd2_1v1,core";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd3 - unused */
/* vdig1 - unused */
vdig2_reg: regulator@6 {
regulator-name = "vdig2_1v8,vdds_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* vpll - unused */
vdac_reg: regulator@8 {
regulator-name = "vdac_1v8,vdds";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-name = "vaux1_1v8,usb";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-name = "vaux2_3v3,io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-name = "vaux33_3v3,usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-name = "vmmc_3v3,io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&usb1 {
status = "okay";
dr_mode = "host";
};
&cppi41dma {
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <5>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <4>;
phy-mode = "rmii";
dual_emac_res_vlan = <3>;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins>;
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <8>;
ti,non-removable;
status = "okay";
};
...@@ -83,6 +83,11 @@ mpu { ...@@ -83,6 +83,11 @@ mpu {
}; };
}; };
am33xx_control_module: control_module@4a002000 {
compatible = "syscon";
reg = <0x44e10000 0x7fc>;
};
am33xx_pinmux: pinmux@44e10800 { am33xx_pinmux: pinmux@44e10800 {
compatible = "pinctrl-single"; compatible = "pinctrl-single";
reg = <0x44e10800 0x0238>; reg = <0x44e10800 0x0238>;
...@@ -339,20 +344,24 @@ wdt2: wdt@44e35000 { ...@@ -339,20 +344,24 @@ wdt2: wdt@44e35000 {
interrupts = <91>; interrupts = <91>;
}; };
dcan0: d_can@481cc000 { dcan0: can@481cc000 {
compatible = "bosch,d_can"; compatible = "ti,am3352-d_can";
ti,hwmods = "d_can0"; ti,hwmods = "d_can0";
reg = <0x481cc000 0x2000 reg = <0x481cc000 0x2000>;
0x44e10644 0x4>; clocks = <&dcan0_fck>;
clock-names = "fck";
syscon-raminit = <&am33xx_control_module 0x644 0>;
interrupts = <52>; interrupts = <52>;
status = "disabled"; status = "disabled";
}; };
dcan1: d_can@481d0000 { dcan1: can@481d0000 {
compatible = "bosch,d_can"; compatible = "ti,am3352-d_can";
ti,hwmods = "d_can1"; ti,hwmods = "d_can1";
reg = <0x481d0000 0x2000 reg = <0x481d0000 0x2000>;
0x44e10644 0x4>; clocks = <&dcan1_fck>;
clock-names = "fck";
syscon-raminit = <&am33xx_control_module 0x644 1>;
interrupts = <55>; interrupts = <55>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -57,6 +57,11 @@ l2-cache-controller@48242000 { ...@@ -57,6 +57,11 @@ l2-cache-controller@48242000 {
cache-level = <2>; cache-level = <2>;
}; };
am43xx_control_module: control_module@4a002000 {
compatible = "syscon";
reg = <0x44e10000 0x7f4>;
};
am43xx_pinmux: pinmux@44e10800 { am43xx_pinmux: pinmux@44e10800 {
compatible = "ti,am437-padconf", "pinctrl-single"; compatible = "ti,am437-padconf", "pinctrl-single";
reg = <0x44e10800 0x31c>; reg = <0x44e10800 0x31c>;
...@@ -668,6 +673,26 @@ ehrpwm5: ehrpwm@4830a200 { ...@@ -668,6 +673,26 @@ ehrpwm5: ehrpwm@4830a200 {
}; };
}; };
tscadc: tscadc@44e0d000 {
compatible = "ti,am3359-tscadc";
reg = <0x44e0d000 0x1000>;
ti,hwmods = "adc_tsc";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adc_tsc_fck>;
clock-names = "fck";
status = "disabled";
tsc {
compatible = "ti,am3359-tsc";
};
adc {
#io-channel-cells = <1>;
compatible = "ti,am3359-adc";
};
};
sham: sham@53100000 { sham: sham@53100000 {
compatible = "ti,omap5-sham"; compatible = "ti,omap5-sham";
ti,hwmods = "sham"; ti,hwmods = "sham";
...@@ -897,6 +922,28 @@ ocmcram: ocmcram@40300000 { ...@@ -897,6 +922,28 @@ ocmcram: ocmcram@40300000 {
compatible = "mmio-sram"; compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */ reg = <0x40300000 0x40000>; /* 256k */
}; };
dcan0: can@481cc000 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
ti,hwmods = "d_can0";
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000>;
syscon-raminit = <&am43xx_control_module 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
dcan1: can@481d0000 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
ti,hwmods = "d_can1";
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000>;
syscon-raminit = <&am43xx_control_module 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
}; };
}; };
......
...@@ -254,6 +254,20 @@ lcd_pins: lcd_pins { ...@@ -254,6 +254,20 @@ lcd_pins: lcd_pins {
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
>; >;
}; };
dcan0_default: dcan0_default_pins {
pinctrl-single,pins = <
0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
>;
};
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>;
};
}; };
&i2c0 { &i2c0 {
...@@ -343,6 +357,14 @@ &epwmss0 { ...@@ -343,6 +357,14 @@ &epwmss0 {
status = "okay"; status = "okay";
}; };
&tscadc {
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&ecap0 { &ecap0 {
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -511,3 +533,15 @@ dpi_out: endpoint@0 { ...@@ -511,3 +533,15 @@ dpi_out: endpoint@0 {
}; };
}; };
}; };
&dcan0 {
pinctrl-names = "default";
pinctrl-0 = <&dcan0_default>;
status = "okay";
};
&dcan1 {
pinctrl-names = "default";
pinctrl-0 = <&dcan1_default>;
status = "okay";
};
...@@ -519,6 +519,14 @@ &epwmss0 { ...@@ -519,6 +519,14 @@ &epwmss0 {
status = "okay"; status = "okay";
}; };
&tscadc {
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&ecap0 { &ecap0 {
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
......
...@@ -251,6 +251,21 @@ davinci_mdio_sleep: davinci_mdio_sleep { ...@@ -251,6 +251,21 @@ davinci_mdio_sleep: davinci_mdio_sleep {
>; >;
}; };
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
>;
};
}; };
&i2c1 { &i2c1 {
...@@ -639,3 +654,10 @@ &davinci_mdio { ...@@ -639,3 +654,10 @@ &davinci_mdio {
pinctrl-0 = <&davinci_mdio_default>; pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>; pinctrl-1 = <&davinci_mdio_sleep>;
}; };
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_pins_default>;
pinctrl-1 = <&dcan1_pins_sleep>;
};
...@@ -40,6 +40,8 @@ aliases { ...@@ -40,6 +40,8 @@ aliases {
serial9 = &uart10; serial9 = &uart10;
ethernet0 = &cpsw_emac0; ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1; ethernet1 = &cpsw_emac1;
d_can0 = &dcan1;
d_can1 = &dcan2;
}; };
timer { timer {
...@@ -207,6 +209,11 @@ counter32k: counter@4ae04000 { ...@@ -207,6 +209,11 @@ counter32k: counter@4ae04000 {
ti,hwmods = "counter_32k"; ti,hwmods = "counter_32k";
}; };
dra7_ctrl_core: ctrl_core@4a002000 {
compatible = "syscon";
reg = <0x4a002000 0x6d0>;
};
dra7_ctrl_general: tisyscon@4a002e00 { dra7_ctrl_general: tisyscon@4a002e00 {
compatible = "syscon"; compatible = "syscon";
reg = <0x4a002e00 0x7c>; reg = <0x4a002e00 0x7c>;
...@@ -1157,6 +1164,15 @@ omap_control_pcie2phy: control-pcie@0x4a003c44 { ...@@ -1157,6 +1164,15 @@ omap_control_pcie2phy: control-pcie@0x4a003c44 {
status = "disabled"; status = "disabled";
}; };
rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "rtcss";
clocks = <&sys_32k_ck>;
};
omap_control_usb2phy1: control-phy@4a002300 { omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2"; compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>; reg = <0x4a002300 0x4>;
...@@ -1386,6 +1402,25 @@ phy_sel: cpsw-phy-sel@4a002554 { ...@@ -1386,6 +1402,25 @@ phy_sel: cpsw-phy-sel@4a002554 {
}; };
}; };
dcan1: can@481cc000 {
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
syscon-raminit = <&dra7_ctrl_core 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
};
dcan2: can@481d0000 {
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
syscon-raminit = <&dra7_ctrl_core 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
};
}; };
}; };
......
...@@ -105,6 +105,22 @@ mmc2_pins_default: mmc2_pins_default { ...@@ -105,6 +105,22 @@ mmc2_pins_default: mmc2_pins_default {
0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>; >;
}; };
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
>;
};
}; };
&i2c1 { &i2c1 {
...@@ -438,3 +454,10 @@ &davinci_mdio { ...@@ -438,3 +454,10 @@ &davinci_mdio {
pinctrl-1 = <&davinci_mdio_sleep>; pinctrl-1 = <&davinci_mdio_sleep>;
active_slave = <1>; active_slave = <1>;
}; };
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_pins_default>;
pinctrl-1 = <&dcan1_pins_sleep>;
};
...@@ -49,6 +49,24 @@ hsusb2_phy: hsusb2_phy { ...@@ -49,6 +49,24 @@ hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv"; compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>; vcc-supply = <&hsusb2_power>;
}; };
ads7846reg: ads7846-reg {
compatible = "regulator-fixed";
regulator-name = "ads7846-reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
tv0: connector@1 {
compatible = "svideo-connector";
label = "tv";
port {
tv_connector_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
};
}; };
&omap3_pmx_core { &omap3_pmx_core {
...@@ -107,12 +125,43 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ ...@@ -107,12 +125,43 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x { dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
pinctrl-single,pins = < pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
>;
};
ads7846_pins: pinmux_ads7846_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
>; >;
}; };
}; };
...@@ -133,12 +182,22 @@ &mmc3 { ...@@ -133,12 +182,22 @@ &mmc3 {
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>; clock-frequency = <400000>;
at24@50 {
compatible = "at24,24c02";
pagesize = <16>;
reg = <0x50>;
};
}; };
&i2c3 { &i2c3 {
clock-frequency = <400000>; clock-frequency = <400000>;
}; };
&usbhshost { &usbhshost {
port1-mode = "ehci-phy"; port1-mode = "ehci-phy";
port2-mode = "ehci-phy"; port2-mode = "ehci-phy";
...@@ -147,3 +206,56 @@ &usbhshost { ...@@ -147,3 +206,56 @@ &usbhshost {
&usbhsehci { &usbhsehci {
phys = <&hsusb1_phy &hsusb2_phy>; phys = <&hsusb1_phy &hsusb2_phy>;
}; };
&mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
/* touch controller */
ads7846@0 {
pinctrl-names = "default";
pinctrl-0 = <&ads7846_pins>;
compatible = "ti,ads7846";
vcc-supply = <&ads7846reg>;
reg = <0>; /* CS0 */
spi-max-frequency = <1500000>;
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
pendown-gpio = <&gpio2 25 0>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
ti,y-min = /bits/ 16 <0x0>;
ti,y-max = /bits/ 16 <0x0fff>;
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
ti,debounce-max = /bits/ 16 <30>;
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
linux,wakeup;
};
};
&venc {
status = "ok";
port {
venc_out: endpoint {
remote-endpoint = <&tv_connector_in>;
ti,channels = <2>;
};
};
};
&mcbsp2 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
...@@ -10,6 +10,14 @@ cpu@0 { ...@@ -10,6 +10,14 @@ cpu@0 {
cpu0-supply = <&vcc>; cpu0-supply = <&vcc>;
}; };
}; };
sound {
compatible = "ti,omap-twl4030";
ti,model = "cm-t35";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
}; };
&omap3_pmx_core { &omap3_pmx_core {
...@@ -59,11 +67,22 @@ twl: twl@48 { ...@@ -59,11 +67,22 @@ twl: twl@48 {
reg = <0x48>; reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>; interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
}; };
}; };
#include "twl4030.dtsi" #include "twl4030.dtsi"
#include "twl4030_omap3.dtsi" #include "twl4030_omap3.dtsi"
#include <dt-bindings/input/input.h>
&venc {
vdda-supply = <&vdac>;
};
&mmc1 { &mmc1 {
vmmc-supply = <&vmmc1>; vmmc-supply = <&vmmc1>;
...@@ -75,6 +94,22 @@ &twl_gpio { ...@@ -75,6 +94,22 @@ &twl_gpio {
ti,pullups = <0x000001>; ti,pullups = <0x000001>;
}; };
&twl_keypad {
linux,keymap = <
MATRIX_KEY(0x00, 0x01, KEY_A)
MATRIX_KEY(0x00, 0x02, KEY_B)
MATRIX_KEY(0x00, 0x03, KEY_LEFT)
MATRIX_KEY(0x01, 0x01, KEY_UP)
MATRIX_KEY(0x01, 0x02, KEY_ENTER)
MATRIX_KEY(0x01, 0x03, KEY_DOWN)
MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
MATRIX_KEY(0x02, 0x02, KEY_C)
MATRIX_KEY(0x02, 0x03, KEY_D)
>;
};
&hsusb1_phy { &hsusb1_phy {
reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>; reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
}; };
......
...@@ -115,6 +115,12 @@ sound: n900-audio { ...@@ -115,6 +115,12 @@ sound: n900-audio {
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
}; };
battery: n900-battery {
compatible = "nokia,n900-battery";
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
io-channel-names = "temp", "bsi", "vbat";
};
}; };
&omap3_pmx_core { &omap3_pmx_core {
...@@ -567,6 +573,16 @@ tpa6130a2: tpa6130a2@60 { ...@@ -567,6 +573,16 @@ tpa6130a2: tpa6130a2@60 {
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
}; };
si4713: si4713@63 {
compatible = "silabs,si4713";
reg = <0x63>;
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
vio-supply = <&vio>;
vdd-supply = <&vaux1>;
};
bq24150a: bq24150a@6b { bq24150a: bq24150a@6b {
compatible = "ti,bq24150a"; compatible = "ti,bq24150a";
reg = <0x6b>; reg = <0x6b>;
......
...@@ -43,6 +43,16 @@ dvi_connector_in: endpoint { ...@@ -43,6 +43,16 @@ dvi_connector_in: endpoint {
}; };
}; };
}; };
audio_amp: audio_amp {
compatible = "regulator-fixed";
regulator-name = "audio_amp";
pinctrl-names = "default";
pinctrl-0 = <&sb_t35_audio_amp>;
gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
enable-active-low;
regulator-always-on;
};
}; };
&omap3_pmx_core { &omap3_pmx_core {
...@@ -58,6 +68,32 @@ tfp410_pins: pinmux_tfp410_pins { ...@@ -58,6 +68,32 @@ tfp410_pins: pinmux_tfp410_pins {
OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
>; >;
}; };
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
at24@50 {
compatible = "at24,24c02";
pagesize = <16>;
reg = <0x50>;
};
}; };
&gpmc { &gpmc {
......
...@@ -11,6 +11,7 @@ / { ...@@ -11,6 +11,7 @@ / {
aliases { aliases {
display0 = &dvi0; display0 = &dvi0;
display1 = &tv0;
}; };
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
......
...@@ -11,6 +11,7 @@ / { ...@@ -11,6 +11,7 @@ / {
aliases { aliases {
display0 = &dvi0; display0 = &dvi0;
display1 = &tv0;
}; };
}; };
......
...@@ -11,6 +11,7 @@ / { ...@@ -11,6 +11,7 @@ / {
aliases { aliases {
display0 = &dvi0; display0 = &dvi0;
display1 = &tv0;
}; };
}; };
......
...@@ -177,6 +177,7 @@ &dss { ...@@ -177,6 +177,7 @@ &dss {
&hdmi { &hdmi {
status = "ok"; status = "ok";
vdda-supply = <&vdac>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dss_hdmi_pins>; pinctrl-0 = <&dss_hdmi_pins>;
......
...@@ -131,13 +131,11 @@ static void __init omap3_sbc_t3730_legacy_init(void) ...@@ -131,13 +131,11 @@ static void __init omap3_sbc_t3730_legacy_init(void)
{ {
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
omap_ads7846_init(1, 57, 0, NULL);
} }
static void __init omap3_sbc_t3530_legacy_init(void) static void __init omap3_sbc_t3530_legacy_init(void)
{ {
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
omap_ads7846_init(1, 57, 0, NULL);
} }
struct ti_st_plat_data wilink_pdata = { struct ti_st_plat_data wilink_pdata = {
...@@ -249,7 +247,6 @@ static void __init omap3_sbc_t3517_legacy_init(void) ...@@ -249,7 +247,6 @@ static void __init omap3_sbc_t3517_legacy_init(void)
hsmmc2_internal_input_clk(); hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init(); omap3_sbc_t3517_wifi_init();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
omap_ads7846_init(1, 57, 0, NULL);
} }
static void __init am3517_evm_legacy_init(void) static void __init am3517_evm_legacy_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment