Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll',...

Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', 'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next

* clk-ingenic-fixes:
  :  - Ingenic i2s bit update and allow UDC clk to gate
  clk: ingenic: Add missing flag for UDC clock
  clk: ingenic: Fix incorrect data for the i2s clock

* clk-max9485:
  :  - Maxim 9485 Programmable Clock Generator
  clk: Add driver for MAX9485
  dts: clk: add devicetree bindings for MAX9485

* clk-pxa-32k-pll:
  :  - Expose 32 kHz PLL on PXA SoCs
  clk: pxa: export 32kHz PLL

* clk-aspeed:
  :  - Fix name of aspeed SDC clk define to have only one 'CLK'
  clk: aspeed: Fix SDCLK name

* clk-imx6sll-gpio:
  :  - imx6sll GPIO clk gate support
  clk: imx6sll: add GPIO LPCGs

Documentation/devicetree/bindings/clock/maxim,max9485.txt

+Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
+
+This device exposes 4 clocks in total:
+
+- MAX9485_MCLKOUT: 	A gated, buffered output of the input clock of 27 MHz
+- MAX9485_CLKOUT:	A PLL that can be configured to 16 different discrete
+			frequencies
+- MAX9485_CLKOUT[1,2]:	Two gated outputs for MAX9485_CLKOUT
+
+MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+requests.
+
+Required properties:
+- compatible:	"maxim,max9485"
+- clocks:	Input clock, must provice 27.000 MHz
+- clock-names:	Must be set to "xclk"
+- #clock-cells: From common clock binding; shall be set to 1
+
+Optional properties:
+- reset-gpios:		GPIO descriptor connected to the #RESET input pin
+- vdd-supply:		A regulator node for Vdd
+- clock-output-names:	Name of output clocks, as defined in common clock
+			bindings
+
+If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
+and "clkout2".
+
+Clocks are defined as preprocessor macros in the dt-binding header.
+
+Example:
+
+	#include <dt-bindings/clock/maxim,max9485.h>
+
+	xo-27mhz: xo-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	&i2c0 {
+		max9485: audio-clock@63 {
+			reg = <0x63>;
+			compatible = "maxim,max9485";
+			clock-names = "xclk";
+			clocks = <&xo-27mhz>;
+			reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			vdd-supply = <&3v3-reg>;
+			#clock-cells = <1>;
+		};
+	};
+
+	// Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "foo-input-clk";
+		clocks = <&max9485 MAX9485_CLKOUT1>;
+	};

drivers/clk/Kconfig

@@ -45,6 +45,12 @@ config COMMON_CLK_MAX77686
 	  This driver supports Maxim 77620/77686/77802 crystal oscillator
 	  clock.
 
+config COMMON_CLK_MAX9485
+	tristate "Maxim 9485 Programmable Clock Generator"
+	depends on I2C
+	help
+	  This driver supports Maxim 9485 Programmable Audio Clock Generator
+
 config COMMON_CLK_RK808
 	tristate "Clock driver for RK805/RK808/RK818"
 	depends on MFD_RK808

drivers/clk/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
+obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-npcm7xx.o

drivers/clk/clk-aspeed.c

@@ -109,7 +109,7 @@ static const struct aspeed_gate_data aspeed_gates[] = {
 	[ASPEED_CLK_GATE_RSACLK] =	{ 24, -1, "rsaclk-gate",	NULL,	0 }, /* RSA */
 	[ASPEED_CLK_GATE_UART3CLK] =	{ 25, -1, "uart3clk-gate",	"uart",	0 }, /* UART3 */
 	[ASPEED_CLK_GATE_UART4CLK] =	{ 26, -1, "uart4clk-gate",	"uart",	0 }, /* UART4 */
-	[ASPEED_CLK_GATE_SDCLKCLK] =	{ 27, 16, "sdclk-gate",		NULL,	0 }, /* SDIO/SD */
+	[ASPEED_CLK_GATE_SDCLK] =	{ 27, 16, "sdclk-gate",		NULL,	0 }, /* SDIO/SD */
 	[ASPEED_CLK_GATE_LHCCLK] =	{ 28, -1, "lhclk-gate",		"lhclk", 0 }, /* LPC master/LPC+ */
 };
 

drivers/clk/clk-max9485.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+#define MAX9485_NUM_CLKS 4
+
+/* This chip has only one register of 8 bit width. */
+
+#define MAX9485_FS_12KHZ	(0 << 0)
+#define MAX9485_FS_32KHZ	(1 << 0)
+#define MAX9485_FS_44_1KHZ	(2 << 0)
+#define MAX9485_FS_48KHZ	(3 << 0)
+
+#define MAX9485_SCALE_256	(0 << 2)
+#define MAX9485_SCALE_384	(1 << 2)
+#define MAX9485_SCALE_768	(2 << 2)
+
+#define MAX9485_DOUBLE		BIT(4)
+#define MAX9485_CLKOUT1_ENABLE	BIT(5)
+#define MAX9485_CLKOUT2_ENABLE	BIT(6)
+#define MAX9485_MCLK_ENABLE	BIT(7)
+#define MAX9485_FREQ_MASK	0x1f
+
+struct max9485_rate {
+	unsigned long out;
+	u8 reg_value;
+};
+
+/*
+ * Ordered by frequency. For frequency the hardware can generate with
+ * multiple settings, the one with lowest jitter is listed first.
+ */
+static const struct max9485_rate max9485_rates[] = {
+	{  3072000, MAX9485_FS_12KHZ   | MAX9485_SCALE_256 },
+	{  4608000, MAX9485_FS_12KHZ   | MAX9485_SCALE_384 },
+	{  8192000, MAX9485_FS_32KHZ   | MAX9485_SCALE_256 },
+	{  9126000, MAX9485_FS_12KHZ   | MAX9485_SCALE_768 },
+	{ 11289600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 },
+	{ 12288000, MAX9485_FS_48KHZ   | MAX9485_SCALE_256 },
+	{ 12288000, MAX9485_FS_32KHZ   | MAX9485_SCALE_384 },
+	{ 16384000, MAX9485_FS_32KHZ   | MAX9485_SCALE_256 | MAX9485_DOUBLE },
+	{ 16934400, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 },
+	{ 18384000, MAX9485_FS_48KHZ   | MAX9485_SCALE_384 },
+	{ 22579200, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
+	{ 24576000, MAX9485_FS_48KHZ   | MAX9485_SCALE_256 | MAX9485_DOUBLE },
+	{ 24576000, MAX9485_FS_32KHZ   | MAX9485_SCALE_384 | MAX9485_DOUBLE },
+	{ 24576000, MAX9485_FS_32KHZ   | MAX9485_SCALE_768 },
+	{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
+	{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 },
+	{ 36864000, MAX9485_FS_48KHZ   | MAX9485_SCALE_384 | MAX9485_DOUBLE },
+	{ 36864000, MAX9485_FS_48KHZ   | MAX9485_SCALE_768 },
+	{ 49152000, MAX9485_FS_32KHZ   | MAX9485_SCALE_768 | MAX9485_DOUBLE },
+	{ 67737600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
+	{ 73728000, MAX9485_FS_48KHZ   | MAX9485_SCALE_768 | MAX9485_DOUBLE },
+	{ } /* sentinel */
+};
+
+struct max9485_driver_data;
+
+struct max9485_clk_hw {
+	struct clk_hw hw;
+	struct clk_init_data init;
+	u8 enable_bit;
+	struct max9485_driver_data *drvdata;
+};
+
+struct max9485_driver_data {
+	struct clk *xclk;
+	struct i2c_client *client;
+	u8 reg_value;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	struct max9485_clk_hw hw[MAX9485_NUM_CLKS];
+};
+
+static inline struct max9485_clk_hw *to_max9485_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct max9485_clk_hw, hw);
+}
+
+static int max9485_update_bits(struct max9485_driver_data *drvdata,
+			       u8 mask, u8 value)
+{
+	int ret;
+
+	drvdata->reg_value &= ~mask;
+	drvdata->reg_value |= value;
+
+	dev_dbg(&drvdata->client->dev,
+		"updating mask 0x%02x value 0x%02x -> 0x%02x\n",
+		mask, value, drvdata->reg_value);
+
+	ret = i2c_master_send(drvdata->client,
+			      &drvdata->reg_value,
+			      sizeof(drvdata->reg_value));
+
+	return ret < 0 ? ret : 0;
+}
+
+static int max9485_clk_prepare(struct clk_hw *hw)
+{
+	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
+
+	return max9485_update_bits(clk_hw->drvdata,
+				   clk_hw->enable_bit,
+				   clk_hw->enable_bit);
+}
+
+static void max9485_clk_unprepare(struct clk_hw *hw)
+{
+	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
+
+	max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, 0);
+}
+
+/*
+ * CLKOUT - configurable clock output
+ */
+static int max9485_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
+	const struct max9485_rate *entry;
+
+	for (entry = max9485_rates; entry->out != 0; entry++)
+		if (entry->out == rate)
+			break;
+
+	if (entry->out == 0)
+		return -EINVAL;
+
+	return max9485_update_bits(clk_hw->drvdata,
+				   MAX9485_FREQ_MASK,
+				   entry->reg_value);
+}
+
+static unsigned long max9485_clkout_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
+	struct max9485_driver_data *drvdata = clk_hw->drvdata;
+	u8 val = drvdata->reg_value & MAX9485_FREQ_MASK;
+	const struct max9485_rate *entry;
+
+	for (entry = max9485_rates; entry->out != 0; entry++)
+		if (val == entry->reg_value)
+			return entry->out;
+
+	return 0;
+}
+
+static long max9485_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	const struct max9485_rate *curr, *prev = NULL;
+
+	for (curr = max9485_rates; curr->out != 0; curr++) {
+		/* Exact matches */
+		if (curr->out == rate)
+			return rate;
+
+		/*
+		 * Find the first entry that has a frequency higher than the
+		 * requested one.
+		 */
+		if (curr->out > rate) {
+			unsigned int mid;
+
+			/*
+			 * If this is the first entry, clamp the value to the
+			 * lowest possible frequency.
+			 */
+			if (!prev)
+				return curr->out;
+
+			/*
+			 * Otherwise, determine whether the previous entry or
+			 * current one is closer.
+			 */
+			mid = prev->out + ((curr->out - prev->out) / 2);
+
+			return (mid > rate) ? prev->out : curr->out;
+		}
+
+		prev = curr;
+	}
+
+	/* If the last entry was still too high, clamp the value */
+	return prev->out;
+}
+
+struct max9485_clk {
+	const char *name;
+	int parent_index;
+	const struct clk_ops ops;
+	u8 enable_bit;
+};
+
+static const struct max9485_clk max9485_clks[MAX9485_NUM_CLKS] = {
+	[MAX9485_MCLKOUT] = {
+		.name = "mclkout",
+		.parent_index = -1,
+		.enable_bit = MAX9485_MCLK_ENABLE,
+		.ops = {
+			.prepare	= max9485_clk_prepare,
+			.unprepare	= max9485_clk_unprepare,
+		},
+	},
+	[MAX9485_CLKOUT] = {
+		.name = "clkout",
+		.parent_index = -1,
+		.ops = {
+			.set_rate	= max9485_clkout_set_rate,
+			.round_rate	= max9485_clkout_round_rate,
+			.recalc_rate	= max9485_clkout_recalc_rate,
+		},
+	},
+	[MAX9485_CLKOUT1] = {
+		.name = "clkout1",
+		.parent_index = MAX9485_CLKOUT,
+		.enable_bit = MAX9485_CLKOUT1_ENABLE,
+		.ops = {
+			.prepare	= max9485_clk_prepare,
+			.unprepare	= max9485_clk_unprepare,
+		},
+	},
+	[MAX9485_CLKOUT2] = {
+		.name = "clkout2",
+		.parent_index = MAX9485_CLKOUT,
+		.enable_bit = MAX9485_CLKOUT2_ENABLE,
+		.ops = {
+			.prepare	= max9485_clk_prepare,
+			.unprepare	= max9485_clk_unprepare,
+		},
+	},
+};
+
+static struct clk_hw *
+max9485_of_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct max9485_driver_data *drvdata = data;
+	unsigned int idx = clkspec->args[0];
+
+	return &drvdata->hw[idx].hw;
+}
+
+static int max9485_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct max9485_driver_data *drvdata;
+	struct device *dev = &client->dev;
+	const char *xclk_name;
+	int i, ret;
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->xclk = devm_clk_get(dev, "xclk");
+	if (IS_ERR(drvdata->xclk))
+		return PTR_ERR(drvdata->xclk);
+
+	xclk_name = __clk_get_name(drvdata->xclk);
+
+	drvdata->supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(drvdata->supply))
+		return PTR_ERR(drvdata->supply);
+
+	ret = regulator_enable(drvdata->supply);
+	if (ret < 0)
+		return ret;
+
+	drvdata->reset_gpio =
+		devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(drvdata->reset_gpio))
+		return PTR_ERR(drvdata->reset_gpio);
+
+	i2c_set_clientdata(client, drvdata);
+	drvdata->client = client;
+
+	ret = i2c_master_recv(drvdata->client, &drvdata->reg_value,
+			      sizeof(drvdata->reg_value));
+	if (ret < 0) {
+		dev_warn(dev, "Unable to read device register: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < MAX9485_NUM_CLKS; i++) {
+		int parent_index = max9485_clks[i].parent_index;
+		const char *name;
+
+		if (of_property_read_string_index(dev->of_node,
+						  "clock-output-names",
+						  i, &name) == 0) {
+			drvdata->hw[i].init.name = name;
+		} else {
+			drvdata->hw[i].init.name = max9485_clks[i].name;
+		}
+
+		drvdata->hw[i].init.ops = &max9485_clks[i].ops;
+		drvdata->hw[i].init.num_parents = 1;
+		drvdata->hw[i].init.flags = 0;
+
+		if (parent_index > 0) {
+			drvdata->hw[i].init.parent_names =
+				&drvdata->hw[parent_index].init.name;
+			drvdata->hw[i].init.flags |= CLK_SET_RATE_PARENT;
+		} else {
+			drvdata->hw[i].init.parent_names = &xclk_name;
+		}
+
+		drvdata->hw[i].enable_bit = max9485_clks[i].enable_bit;
+		drvdata->hw[i].hw.init = &drvdata->hw[i].init;
+		drvdata->hw[i].drvdata = drvdata;
+
+		ret = devm_clk_hw_register(dev, &drvdata->hw[i].hw);
+		if (ret < 0)
+			return ret;
+	}
+
+	return devm_of_clk_add_hw_provider(dev, max9485_of_clk_get, drvdata);
+}
+
+static int __maybe_unused max9485_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
+
+	gpiod_set_value_cansleep(drvdata->reset_gpio, 0);
+
+	return 0;
+}
+
+static int __maybe_unused max9485_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
+	int ret;
+
+	gpiod_set_value_cansleep(drvdata->reset_gpio, 1);
+
+	ret = i2c_master_send(client, &drvdata->reg_value,
+			      sizeof(drvdata->reg_value));
+
+	return ret < 0 ? ret : 0;
+}
+
+static const struct dev_pm_ops max9485_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(max9485_suspend, max9485_resume)
+};
+
+static const struct of_device_id max9485_dt_ids[] = {
+	{ .compatible = "maxim,max9485", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max9485_dt_ids);
+
+static const struct i2c_device_id max9485_i2c_ids[] = {
+	{ .name = "max9485", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max9485_i2c_ids);
+
+static struct i2c_driver max9485_driver = {
+	.driver = {
+		.name		= "max9485",
+		.pm		= &max9485_pm_ops,
+		.of_match_table	= max9485_dt_ids,
+	},
+	.probe = max9485_i2c_probe,
+	.id_table = max9485_i2c_ids,
+};
+module_i2c_driver(max9485_driver);
+
+MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
+MODULE_DESCRIPTION("MAX9485 Programmable Audio Clock Generator");
+MODULE_LICENSE("GPL v2");

drivers/clk/imx/clk-imx6sll.c

@@ -253,6 +253,7 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SLL_CLK_DCP]		= imx_clk_gate2("dcp", "ahb", base + 0x68, 10);
 	clks[IMX6SLL_CLK_UART2_IPG]	= imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28);
 	clks[IMX6SLL_CLK_UART2_SERIAL]	= imx_clk_gate2("uart2_serial",	"uart_podf", base + 0x68, 28);
+	clks[IMX6SLL_CLK_GPIO2]		= imx_clk_gate2("gpio2", "ipg", base + 0x68, 30);
 
 	/* CCGR1 */
 	clks[IMX6SLL_CLK_ECSPI1]	= imx_clk_gate2("ecspi1",	"ecspi_podf", base + 0x6c, 0);
@@ -267,13 +268,17 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SLL_CLK_GPT_SERIAL]	= imx_clk_gate2("gpt1_serial",	"perclk", base + 0x6c, 22);
 	clks[IMX6SLL_CLK_UART4_IPG]	= imx_clk_gate2("uart4_ipg",	"ipg", base + 0x6c, 24);
 	clks[IMX6SLL_CLK_UART4_SERIAL]	= imx_clk_gate2("uart4_serail",	"uart_podf", base + 0x6c, 24);
+	clks[IMX6SLL_CLK_GPIO1]		= imx_clk_gate2("gpio1",	"ipg", base + 0x6c, 26);
+	clks[IMX6SLL_CLK_GPIO5]		= imx_clk_gate2("gpio5",	"ipg", base + 0x6c, 30);
 
 	/* CCGR2 */
+	clks[IMX6SLL_CLK_GPIO6]		= imx_clk_gate2("gpio6",	"ipg",    base + 0x70, 0);
 	clks[IMX6SLL_CLK_CSI]		= imx_clk_gate2("csi",		"axi",    base + 0x70,	2);
 	clks[IMX6SLL_CLK_I2C1]		= imx_clk_gate2("i2c1",		"perclk", base + 0x70,	6);
 	clks[IMX6SLL_CLK_I2C2]		= imx_clk_gate2("i2c2",		"perclk", base + 0x70,	8);
 	clks[IMX6SLL_CLK_I2C3]		= imx_clk_gate2("i2c3",		"perclk", base + 0x70,	10);
 	clks[IMX6SLL_CLK_OCOTP]		= imx_clk_gate2("ocotp",	"ipg",    base + 0x70,	12);
+	clks[IMX6SLL_CLK_GPIO3]		= imx_clk_gate2("gpio3",	"ipg",    base + 0x70,	26);
 	clks[IMX6SLL_CLK_LCDIF_APB]	= imx_clk_gate2("lcdif_apb",	"axi",    base + 0x70,	28);
 	clks[IMX6SLL_CLK_PXP]		= imx_clk_gate2("pxp",		"axi",    base + 0x70,	30);
 
@@ -283,6 +288,7 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SLL_CLK_EPDC_AXI]	= imx_clk_gate2("epdc_aclk",	"axi",		base + 0x74, 4);
 	clks[IMX6SLL_CLK_EPDC_PIX]	= imx_clk_gate2("epdc_pix",	"epdc_podf",	base + 0x74, 4);
 	clks[IMX6SLL_CLK_LCDIF_PIX]	= imx_clk_gate2("lcdif_pix",	"lcdif_podf",	base + 0x74, 10);
+	clks[IMX6SLL_CLK_GPIO4]		= imx_clk_gate2("gpio4",	"ipg",		base + 0x74, 12);
 	clks[IMX6SLL_CLK_WDOG1]		= imx_clk_gate2("wdog1",	"ipg",		base + 0x74, 16);
 	clks[IMX6SLL_CLK_MMDC_P0_FAST]	= imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf",  base + 0x74,	20, CLK_IS_CRITICAL);
 	clks[IMX6SLL_CLK_MMDC_P0_IPG]	= imx_clk_gate2_flags("mmdc_p0_ipg", "ipg",	   base + 0x74,	24, CLK_IS_CRITICAL);

drivers/clk/ingenic/jz4740-cgu.c

@@ -134,7 +134,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		"i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
 		.mux = { CGU_REG_CPCCR, 31, 1 },
-		.div = { CGU_REG_I2SCDR, 0, 1, 8, -1, -1, -1 },
+		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 6 },
 	},
 
@@ -161,7 +161,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 	},
 
 	[JZ4740_CLK_UDC] = {
-		"udc", CGU_CLK_MUX | CGU_CLK_DIV,
+		"udc", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
 		.mux = { CGU_REG_CPCCR, 29, 1 },
 		.div = { CGU_REG_CPCCR, 23, 1, 6, -1, -1, -1 },

drivers/clk/pxa/clk-pxa25x.c

@@ -292,8 +292,10 @@ static void __init pxa25x_register_plls(void)
 {
 	clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL,
 				CLK_GET_RATE_NOCACHE, 3686400);
-	clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
-				CLK_GET_RATE_NOCACHE, 32768);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768));
 	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
 	clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz",
 				  0, 26, 1);

drivers/clk/pxa/clk-pxa27x.c

@@ -314,9 +314,10 @@ static void __init pxa27x_register_plls(void)
 	clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
 				CLK_GET_RATE_NOCACHE,
 				13 * MHz);
-	clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
-				CLK_GET_RATE_NOCACHE,
-				32768 * KHz);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768 * KHz));
 	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
 	clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1);
 }

drivers/clk/pxa/clk-pxa3xx.c

@@ -286,9 +286,10 @@ static void __init pxa3xx_register_plls(void)
 	clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
 				CLK_GET_RATE_NOCACHE,
 				13 * MHz);
-	clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
-				CLK_GET_RATE_NOCACHE,
-				32768);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768));
 	clk_register_fixed_rate(NULL, "ring_osc_120mhz", NULL,
 				CLK_GET_RATE_NOCACHE,
 				120 * MHz);

include/dt-bindings/clock/aspeed-clock.h

@@ -25,7 +25,7 @@
 #define ASPEED_CLK_GATE_RSACLK		19
 #define ASPEED_CLK_GATE_UART3CLK	20
 #define ASPEED_CLK_GATE_UART4CLK	21
-#define ASPEED_CLK_GATE_SDCLKCLK	22
+#define ASPEED_CLK_GATE_SDCLK		22
 #define ASPEED_CLK_GATE_LHCCLK		23
 #define ASPEED_CLK_HPLL			24
 #define ASPEED_CLK_AHB			25

include/dt-bindings/clock/imx6sll-clock.h

@@ -197,6 +197,13 @@
 #define IMX6SLL_CLK_EXTERN_AUDIO_PODF   171
 #define IMX6SLL_CLK_EXTERN_AUDIO        172
 
-#define IMX6SLL_CLK_END			173
+#define IMX6SLL_CLK_GPIO1               173
+#define IMX6SLL_CLK_GPIO2               174
+#define IMX6SLL_CLK_GPIO3               175
+#define IMX6SLL_CLK_GPIO4               176
+#define IMX6SLL_CLK_GPIO5               177
+#define IMX6SLL_CLK_GPIO6               178
+
+#define IMX6SLL_CLK_END			179
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */

include/dt-bindings/clock/maxim,max9485.h

+/*
+ * Copyright (C) 2018 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_MAX9485_CLK_H
+#define __DT_BINDINGS_MAX9485_CLK_H
+
+#define MAX9485_MCLKOUT	0
+#define MAX9485_CLKOUT	1
+#define MAX9485_CLKOUT1	2
+#define MAX9485_CLKOUT2	3
+
+#endif /* __DT_BINDINGS_MAX9485_CLK_H */

include/dt-bindings/clock/pxa-clock.h

@@ -72,6 +72,7 @@
 #define CLK_USIM 58
 #define CLK_USIM1 59
 #define CLK_USMI0 60
-#define CLK_MAX 61
+#define CLK_OSC32k768 61
+#define CLK_MAX 62
 
 #endif