Merge branch 'dt/linus' into dt/next

Documentation/devicetree/bindings/arm/arm,scmi.txt

@@ -102,7 +102,7 @@ Required sub-node properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt
 
 Example:

Documentation/devicetree/bindings/arm/arm,scpi.txt

@@ -109,7 +109,7 @@ Required properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
 [4] Documentation/devicetree/bindings/power/power-domain.yaml
 
 Example:

Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt

@@ -62,7 +62,7 @@ Timer node:
 
 Syscon reboot node:
 
-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
 detailed list of properties, the two values defined below are specific to the
 BCM6328-style timer:
 

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -226,7 +226,7 @@ properties:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     description: |
       List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.txt).
+      by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
     $ref: '/schemas/types.yaml#/definitions/uint32'

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -160,7 +160,7 @@ properties:
         items:
           - enum:
               - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
-              - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
               - eckelmann,imx6dl-ci4x10
               - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base

Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt

 * Hisilicon Hi3519 System Controller Block
 
 This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
 
 Required properties:
 - compatible: "hisilicon,hi3519-sysctrl".

Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt

@@ -81,4 +81,4 @@ Example:
 		};
 	};
 
-[1]. Documentation/devicetree/bindings/arm/idle-states.txt
+[1]. Documentation/devicetree/bindings/arm/idle-states.yaml

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -17,7 +17,7 @@ am335x and am437x only:
 - pm-sram: Phandles to ocmcram nodes to be used for power management.
 	   First should be type 'protect-exec' for the driver to use to copy
 	   and run PM functions, second should be regular pool to be used for
-	   data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
 	   for more details.
 
 Examples:

Documentation/devicetree/bindings/arm/psci.yaml

@@ -100,13 +100,14 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.txt
-
-  "#power-domain-cells":
-    description:
-      The number of cells in a PM domain specifier as per binding in [3].
-      Must be 0 as to represent a single PM domain.
+        Documentation/devicetree/bindings/arm/idle-states.yaml
 
+patternProperties:
+  "^power-domain-":
+    allOf:
+      - $ref: "../power/power-domain.yaml#"
+    type: object
+    description: |
       ARM systems can have multiple cores, sometimes in an hierarchical
       arrangement. This often, but not always, maps directly to the processor
       power topology of the system. Individual nodes in a topology have their
@@ -122,14 +123,8 @@ properties:
       helps to implement support for OSI mode and OS implementations may choose
       to mandate it.
 
-      [3] Documentation/devicetree/bindings/power/power_domain.txt
-      [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
-
-  power-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider.
+      [3] Documentation/devicetree/bindings/power/power-domain.yaml
+      [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
 
 required:
   - compatible
@@ -199,7 +194,7 @@ examples:
 
       CPU0: cpu@0 {
         device_type = "cpu";
-        compatible = "arm,cortex-a53", "arm,armv8";
+        compatible = "arm,cortex-a53";
         reg = <0x0>;
         enable-method = "psci";
         power-domains = <&CPU_PD0>;
@@ -208,7 +203,7 @@ examples:
 
       CPU1: cpu@1 {
         device_type = "cpu";
-        compatible = "arm,cortex-a57", "arm,armv8";
+        compatible = "arm,cortex-a53";
         reg = <0x100>;
         enable-method = "psci";
         power-domains = <&CPU_PD1>;
@@ -224,6 +219,9 @@ examples:
           exit-latency-us = <10>;
           min-residency-us = <100>;
         };
+      };
+
+      domain-idle-states {
 
         CLUSTER_RET: cluster-retention {
           compatible = "domain-idle-state";
@@ -247,19 +245,19 @@ examples:
       compatible = "arm,psci-1.0";
       method = "smc";
 
-      CPU_PD0: cpu-pd0 {
+      CPU_PD0: power-domain-cpu0 {
         #power-domain-cells = <0>;
         domain-idle-states = <&CPU_PWRDN>;
         power-domains = <&CLUSTER_PD>;
       };
 
-      CPU_PD1: cpu-pd1 {
+      CPU_PD1: power-domain-cpu1 {
         #power-domain-cells = <0>;
         domain-idle-states =  <&CPU_PWRDN>;
         power-domains = <&CLUSTER_PD>;
       };
 
-      CLUSTER_PD: cluster-pd {
+      CLUSTER_PD: power-domain-cluster {
         #power-domain-cells = <0>;
         domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
       };

Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml

@@ -52,7 +52,7 @@ required:
 
 examples:
   - |
-    mlahb: ahb {
+    mlahb: ahb@38000000 {
       compatible = "st,mlahb", "simple-bus";
       #address-cells = <1>;
       #size-cells = <1>;

Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml

@@ -70,7 +70,6 @@ examples:
         #size-cells = <0>;
 
         pmic@3e3 {
-            compatible = "...";
             reg = <0x3e3>;
 
             /* ... */

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml

@@ -40,7 +40,7 @@ additionalProperties: false
 
 examples:
   - |
-    osc24M: clk@01c20050 {
+    osc24M: clk@1c20050 {
         #clock-cells = <0>;
         compatible = "allwinner,sun4i-a10-osc-clk";
         reg = <0x01c20050 0x4>;

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml

@@ -41,7 +41,7 @@ additionalProperties: false
 
 examples:
   - |
-    clk@0600005c {
+    clk@600005c {
         #clock-cells = <0>;
         compatible = "allwinner,sun9i-a80-gt-clk";
         reg = <0x0600005c 0x4>;

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -42,7 +42,7 @@ properties:
       be part of GCC and hence the TSENS properties can also be part
       of the GCC/clock-controller node.
       For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
 
   nvmem-cell-names:
     minItems: 1

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml

@@ -49,11 +49,7 @@ examples:
         resets = <&tcon_ch0_clk 0>;
 
         port {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            tve0_in_tcon0: endpoint@0 {
-                reg = <0>;
+            tve0_in_tcon0: endpoint {
                 remote-endpoint = <&tcon0_out_tve0>;
             };
         };

Documentation/devicetree/bindings/display/bridge/anx6345.yaml

@@ -79,21 +79,15 @@ examples:
           #size-cells = <0>;
 
           anx6345_in: port@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <0>;
-            anx6345_in_tcon0: endpoint@0 {
-              reg = <0>;
+            anx6345_in_tcon0: endpoint {
               remote-endpoint = <&tcon0_out_anx6345>;
             };
           };
 
           anx6345_out: port@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <1>;
-            anx6345_out_panel: endpoint@0 {
-              reg = <0>;
+            anx6345_out_panel: endpoint {
               remote-endpoint = <&panel_in_edp>;
             };
           };

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,6 +37,8 @@ examples:
     dsi@ff450000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
             reg = <0>;

Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml

@@ -37,6 +37,8 @@ examples:
     dsi@ff450000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
         panel@0 {
             compatible = "xinpeng,xpp055c272";
             reg = <0>;

Documentation/devicetree/bindings/display/simple-framebuffer.yaml

@@ -174,10 +174,6 @@ examples:
       };
     };
 
-    soc@1c00000 {
-      lcdc0: lcdc@1c0c000 {
-        compatible = "allwinner,sun4i-a10-lcdc";
-      };
-    };
+    lcdc0: lcdc { };
 
 ...

Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt

@@ -37,7 +37,7 @@ Optional nodes:
    supports a single port with a single endpoint.
 
  - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
-   Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+   Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
    tfp410 DVI encoder or lcd panel to lcdc
 
 [1] There is an errata about AM335x color wiring. For 16-bit color mode

Documentation/devicetree/bindings/dma/ti/k3-udma.yaml

@@ -143,7 +143,7 @@ examples:
             #size-cells = <2>;
             dma-coherent;
             dma-ranges;
-            ranges;
+            ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
 
             ti,sci-dev-id = <118>;
 
@@ -169,16 +169,4 @@ examples:
                 ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
             };
         };
-
-        mcasp0: mcasp@02B00000 {
-            dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
-            dma-names = "tx", "rx";
-        };
-
-        crypto: crypto@4E00000 {
-            compatible = "ti,sa2ul-crypto";
-
-            dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
-            dma-names = "tx", "rx1", "rx2";
-        };
     };

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -84,31 +84,31 @@ examples:
     gpu_opp_table: opp_table0 {
       compatible = "operating-points-v2";
 
-      opp@533000000 {
+      opp-533000000 {
         opp-hz = /bits/ 64 <533000000>;
         opp-microvolt = <1250000>;
       };
-      opp@450000000 {
+      opp-450000000 {
         opp-hz = /bits/ 64 <450000000>;
         opp-microvolt = <1150000>;
       };
-      opp@400000000 {
+      opp-400000000 {
         opp-hz = /bits/ 64 <400000000>;
         opp-microvolt = <1125000>;
       };
-      opp@350000000 {
+      opp-350000000 {
         opp-hz = /bits/ 64 <350000000>;
         opp-microvolt = <1075000>;
       };
-      opp@266000000 {
+      opp-266000000 {
         opp-hz = /bits/ 64 <266000000>;
         opp-microvolt = <1025000>;
       };
-      opp@160000000 {
+      opp-160000000 {
         opp-hz = /bits/ 64 <160000000>;
         opp-microvolt = <925000>;
       };
-      opp@100000000 {
+      opp-100000000 {
         opp-hz = /bits/ 64 <100000000>;
         opp-microvolt = <912500>;
       };

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -138,31 +138,31 @@ examples:
     gpu_opp_table: opp_table0 {
       compatible = "operating-points-v2";
 
-      opp@533000000 {
+      opp-533000000 {
         opp-hz = /bits/ 64 <533000000>;
         opp-microvolt = <1250000>;
       };
-      opp@450000000 {
+      opp-450000000 {
         opp-hz = /bits/ 64 <450000000>;
         opp-microvolt = <1150000>;
       };
-      opp@400000000 {
+      opp-400000000 {
         opp-hz = /bits/ 64 <400000000>;
         opp-microvolt = <1125000>;
       };
-      opp@350000000 {
+      opp-350000000 {
         opp-hz = /bits/ 64 <350000000>;
         opp-microvolt = <1075000>;
       };
-      opp@266000000 {
+      opp-266000000 {
         opp-hz = /bits/ 64 <266000000>;
         opp-microvolt = <1025000>;
       };
-      opp@160000000 {
+      opp-160000000 {
         opp-hz = /bits/ 64 <160000000>;
         opp-microvolt = <925000>;
       };
-      opp@100000000 {
+      opp-100000000 {
         opp-hz = /bits/ 64 <100000000>;
         opp-microvolt = <912500>;
       };

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

@@ -123,7 +123,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473@0 {
+        ncp15wb473 {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;

Documentation/devicetree/bindings/input/touchscreen/goodix.yaml

@@ -62,7 +62,7 @@ required:
 
 examples:
 - |
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       gt928@5d {

Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt

 Texas Instruments TWL family (twl4030) pwrbutton module
 
 This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
 
 This module provides a simple power button event via an Interrupt.
 

Documentation/devicetree/bindings/leds/common.yaml

@@ -85,7 +85,7 @@ properties:
         # LED will act as a back-light, controlled by the framebuffer system
       - backlight
         # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
       - default-on
         # LED "double" flashes at a load average based rate
       - heartbeat

Documentation/devicetree/bindings/leds/register-bit-led.txt

@@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a
 single LED. The register bit LEDs appear as children to the
 syscon device, with the proper compatible string. For the
 syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
 
 Each LED is represented as a sub-node of the syscon device. Each
 node's name represents the name of the corresponding LED.

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

@@ -33,24 +33,40 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
-    maxItems: 3
-    items:
-      - description: The CSI interface clock
-      - description: The CSI ISP clock
-      - description: The CSI DRAM clock
+    oneOf:
+      - items:
+        - description: The CSI interface clock
+        - description: The CSI DRAM clock
+
+      - items:
+        - description: The CSI interface clock
+        - description: The CSI ISP clock
+        - description: The CSI DRAM clock
 
   clock-names:
-    minItems: 2
-    maxItems: 3
-    items:
-      - const: bus
-      - const: isp
-      - const: ram
+    oneOf:
+      - items:
+        - const: bus
+        - const: ram
+
+      - items:
+        - const: bus
+        - const: isp
+        - const: ram
 
   resets:
     maxItems: 1
 
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
   # See ./video-interfaces.txt for details
   port:
     type: object

Documentation/devicetree/bindings/media/ti,cal.yaml

@@ -177,7 +177,7 @@ examples:
         };
     };
 
-    i2c5: i2c@4807c000 {
+    i2c {
         clock-frequency = <400000>;
         #address-cells = <1>;
         #size-cells = <0>;

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml

@@ -347,6 +347,7 @@ examples:
         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
         #iommu-cells = <1>;
+        #reset-cells = <1>;
     };
 
     external-memory-controller@7001b000 {
@@ -363,20 +364,23 @@ examples:
             timing-0 {
                 clock-frequency = <12750000>;
 
-                nvidia,emc-zcal-cnt-long = <0x00000042>;
-                nvidia,emc-auto-cal-interval = <0x001fffff>;
-                nvidia,emc-ctt-term-ctrl = <0x00000802>;
-                nvidia,emc-cfg = <0x73240000>;
-                nvidia,emc-cfg-2 = <0x000008c5>;
-                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
-                nvidia,emc-bgbias-ctl0 = <0x00000008>;
                 nvidia,emc-auto-cal-config = <0xa1430000>;
                 nvidia,emc-auto-cal-config2 = <0x00000000>;
                 nvidia,emc-auto-cal-config3 = <0x00000000>;
-                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-bgbias-ctl0 = <0x00000008>;
+                nvidia,emc-cfg = <0x73240000>;
+                nvidia,emc-cfg-2 = <0x000008c5>;
+                nvidia,emc-ctt-term-ctrl = <0x00000802>;
                 nvidia,emc-mode-1 = <0x80100003>;
                 nvidia,emc-mode-2 = <0x80200008>;
                 nvidia,emc-mode-4 = <0x00000000>;
+                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+                nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+                nvidia,emc-zcal-cnt-long = <0x00000042>;
+                nvidia,emc-zcal-interval = <0x00000000>;
 
                 nvidia,emc-configuration = <
                     0x00000000 /* EMC_RC */

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372":
 - sram			: Phandles for generic sram driver nodes,
   first should be type 'protect-exec' for the driver to use to copy
   and run PM functions, second should be regular pool to be used for
-  data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+  data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
   for more details.
 
 Optional properties:

Documentation/devicetree/bindings/mfd/max77650.yaml

@@ -97,14 +97,14 @@ examples:
             regulators {
                 compatible = "maxim,max77650-regulator";
 
-                max77650_ldo: regulator@0 {
+                max77650_ldo: regulator-ldo {
                     regulator-compatible = "ldo";
                     regulator-name = "max77650-ldo";
                     regulator-min-microvolt = <1350000>;
                     regulator-max-microvolt = <2937500>;
                 };
 
-                max77650_sbb0: regulator@1 {
+                max77650_sbb0: regulator-sbb0 {
                     regulator-compatible = "sbb0";
                     regulator-name = "max77650-sbb0";
                     regulator-min-microvolt = <800000>;

Documentation/devicetree/bindings/mfd/tps65910.txt

@@ -26,8 +26,8 @@ Required properties:
             ldo6, ldo7, ldo8
 
 - xxx-supply: Input voltage supply regulator.
-  These entries are require if regulators are enabled for a device. Missing of these
-  properties can cause the regulator registration fails.
+  These entries are required if regulators are enabled for a device. Missing these
+  properties can cause the regulator registration to fail.
   If some of input supply is powered through battery or always-on supply then
   also it is require to have these parameters with proper node handle of always
   on power supply.

Documentation/devicetree/bindings/mfd/zii,rave-sp.txt

@@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices:
 Device				 Description
 ------				 -----------
 rave-sp-wdt			: Watchdog
-rave-sp-nvmem			: Interface to onborad EEPROM
+rave-sp-nvmem			: Interface to onboard EEPROM
 rave-sp-backlight		: Display backlight
 rave-sp-hwmon			: Interface to onboard hardware sensors
 rave-sp-leds			: Interface to onboard LEDs

Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt

@@ -26,7 +26,7 @@ For generic IOMMU bindings, see
 Documentation/devicetree/bindings/iommu/iommu.txt.
 
 For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
 
 Required properties:
 

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -370,6 +370,7 @@ examples:
     mmc3: mmc@1c12000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0x1c12000 0x200>;
         pinctrl-names = "default";
         pinctrl-0 = <&mmc3_pins_a>;
         vmmc-supply = <&reg_vmmc3>;

Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

@@ -124,7 +124,7 @@ not every application needs SDIO irq, e.g. MMC cards.
 		pinctrl-1 = <&mmc1_idle>;
 		pinctrl-2 = <&mmc1_sleep>;
 		...
-		interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	mmc1_idle : pinmux_cirq_pin {

Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt

@@ -27,7 +27,7 @@ Required properties of NAND chips:
   - reg: shall contain the native Chip Select ids from 0 to max supported by
     the cadence nand flash controller
 
-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
 generic bindings.
 
 Example:

Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt

@@ -45,7 +45,7 @@ Optional properties:
   switch queue
 
 - resets: a single phandle and reset identifier pair. See
-  Documentation/devicetree/binding/reset/reset.txt for details.
+  Documentation/devicetree/bindings/reset/reset.txt for details.
 
 - reset-names: If the "reset" property is specified, this property should have
   the value "switch" to denote the switch reset line.

Documentation/devicetree/bindings/net/mdio.yaml

@@ -56,7 +56,6 @@ patternProperties:
 examples:
   - |
     davinci_mdio: mdio@5c030000 {
-        compatible = "ti,davinci_mdio";
         reg = <0x5c030000 0x1000>;
         #address-cells = <1>;
         #size-cells = <0>;

Documentation/devicetree/bindings/nvmem/nvmem.yaml

@@ -76,6 +76,8 @@ examples:
       qfprom: eeprom@700000 {
           #address-cells = <1>;
           #size-cells = <1>;
+          reg = <0x00700000 0x100000>;
+
           wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 
           /* ... */

Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml

@@ -86,7 +86,7 @@ examples:
     #include <dt-bindings/clock/sun4i-a10-ccu.h>
     #include <dt-bindings/reset/sun4i-a10-ccu.h>
 
-    usbphy: phy@01c13400 {
+    usbphy: phy@1c13400 {
         #phy-cells = <1>;
         compatible = "allwinner,sun4i-a10-usb-phy";
         reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -17,7 +17,7 @@ description: |+
                     "aspeed,ast2400-scu", "syscon", "simple-mfd"
 
   Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -18,7 +18,7 @@ description: |+
   			"aspeed,g5-scu", "syscon", "simple-mfd"
 
   Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -17,7 +17,7 @@ description: |+
                 "aspeed,ast2600-scu", "syscon", "simple-mfd"
 
   Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -248,7 +248,7 @@ examples:
       };
 
     //Example 3 pin groups
-      pinctrl@60020000 {
+      pinctrl {
         usart1_pins_a: usart1-0 {
                 pins1 {
                         pinmux = <STM32_PINMUX('A', 9, AF7)>;

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml

@@ -18,7 +18,7 @@ description: |+
                 "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
 
   Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/power/domain-idle-state.txt

-PM Domain Idle State Node:
-
-A domain idle state node represents the state parameters that will be used to
-select the state when there are no active components in the domain.
-
-The state node has the following parameters -
-
-- compatible:
-	Usage: Required
-	Value type: <string>
-	Definition: Must be "domain-idle-state".
-
-- entry-latency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing worst case latency in
-		    microseconds required to enter the idle state.
-		    The exit-latency-us duration may be guaranteed
-		    only after entry-latency-us has passed.
-
-- exit-latency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing worst case latency
-		    in microseconds required to exit the idle state.
-
-- min-residency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing minimum residency duration
-		    in microseconds after which the idle state will yield
-		    power benefits after overcoming the overhead in entering
-i		    the idle state.

Documentation/devicetree/bindings/power/domain-idle-state.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States binding description
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  A domain idle state node represents the state parameters that will be used to
+  select the state when there are no active components in the PM domain.
+
+properties:
+  $nodename:
+    const: domain-idle-states
+
+patternProperties:
+  "^(cpu|cluster|domain)-":
+    type: object
+    description:
+      Each state node represents a domain idle state description.
+
+    properties:
+      compatible:
+        const: domain-idle-state
+
+      entry-latency-us:
+        description:
+          The worst case latency in microseconds required to enter the idle
+          state. Note that, the exit-latency-us duration may be guaranteed only
+          after the entry-latency-us has passed.
+
+      exit-latency-us:
+        description:
+          The worst case latency in microseconds required to exit the idle
+          state.
+
+      min-residency-us:
+        description:
+          The minimum residency duration in microseconds after which the idle
+          state will yield power benefits, after overcoming the overhead while
+          entering the idle state.
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+examples:
+  - |
+
+    domain-idle-states {
+      domain_retention: domain-retention {
+        compatible = "domain-idle-state";
+        entry-latency-us = <20>;
+        exit-latency-us = <40>;
+        min-residency-us = <80>;
+      };
+    };
+...

Documentation/devicetree/bindings/power/power-domain.yaml

@@ -25,22 +25,20 @@ description: |+
 
 properties:
   $nodename:
-    pattern: "^(power-controller|power-domain)(@.*)?$"
+    pattern: "^(power-controller|power-domain)([@-].*)?$"
 
   domain-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    description:
-      A phandle of an idle-state that shall be soaked into a generic domain
-      power state. The idle state definitions are compatible with
-      domain-idle-state specified in
-      Documentation/devicetree/bindings/power/domain-idle-state.txt
-      phandles that are not compatible with domain-idle-state will be ignored.
-      The domain-idle-state property reflects the idle state of this PM domain
-      and not the idle states of the devices or sub-domains in the PM domain.
-      Devices and sub-domains have their own idle-states independent
-      of the parent domain's idle states. In the absence of this property,
-      the domain would be considered as capable of being powered-on
-      or powered-off.
+    description: |
+      Phandles of idle states that defines the available states for the
+      power-domain provider. The idle state definitions are compatible with the
+      domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+      Note that, the domain-idle-state property reflects the idle states of this
+      PM domain and not the idle states of the devices or sub-domains in the PM
+      domain. Devices and sub-domains have their own idle states independent of
+      the parent domain's idle states. In the absence of this property, the
+      domain would be considered as capable of being powered-on or powered-off.
 
   operating-points-v2:
     $ref: /schemas/types.yaml#/definitions/phandle-array

Documentation/devicetree/bindings/power/power_domain.txt

@@ -109,4 +109,4 @@ Example:
 		required-opps = <&domain1_opp_1>;
 	};
 
-[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml

Documentation/devicetree/bindings/regulator/regulator.yaml

@@ -191,7 +191,7 @@ patternProperties:
 
 examples:
   - |
-    xyzreg: regulator@0 {
+    xyzreg: regulator {
       regulator-min-microvolt = <1000000>;
       regulator-max-microvolt = <2500000>;
       regulator-always-on;

Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt

@@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller
 
 The RCC IP is both a reset and a clock controller.
 
-Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

@@ -36,7 +36,7 @@ SAI subnodes required properties:
   - clock-names: Must contain "sai_ck".
 	Must also contain "MCLK", if SAI shares a master clock,
 	with a SAI set as MCLK clock provider.
-  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+  - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
   - dma-names: identifier string for each DMA request line
 	"tx": if sai sub-block is configured as playback DAI
 	"rx": if sai sub-block is configured as capture DAI

Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt

@@ -10,7 +10,7 @@ Required properties:
   - clock-names: must contain "kclk"
   - interrupts: cpu DAI interrupt line
   - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
   - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
 
 Optional properties:

Documentation/devicetree/bindings/spi/st,stm32-spi.yaml

@@ -49,7 +49,7 @@ properties:
   dmas:
     description: |
       DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
-      the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+      the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
     items:
       - description: rx DMA channel
       - description: tx DMA channel

Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml

@@ -125,7 +125,7 @@ examples:
       #size-cells = <1>;
       ranges;
 
-      sram_a: sram@00000000 {
+      sram_a: sram@0 {
         compatible = "mmio-sram";
         reg = <0x00000000 0xc000>;
         #address-cells = <1>;

Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml

@@ -17,7 +17,7 @@ description: |+
                 "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
 
   Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml

@@ -87,7 +87,7 @@ additionalProperties: false
 
 examples:
   - |
-    timer {
+    timer@1c20c00 {
         compatible = "allwinner,sun4i-a10-timer";
         reg = <0x01c20c00 0x400>;
         interrupts = <22>,

MAINTAINERS

@@ -693,7 +693,7 @@ ALLWINNER CPUFREQ DRIVER
 M:	Yangtao Li <tiny.windzz@gmail.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
+F:	Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
 F:	drivers/cpufreq/sun50i-cpufreq-nvmem.c
 
 ALLWINNER CRYPTO DRIVERS
@@ -4016,7 +4016,7 @@ M:	Cheng-Yi Chiang <cychiang@chromium.org>
 S:	Maintained
 R:	Enric Balletbo i Serra <enric.balletbo@collabora.com>
 R:	Guenter Roeck <groeck@chromium.org>
-F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
 F:	sound/soc/codecs/cros_ec_codec.*
 
 CIRRUS LOGIC AUDIO CODEC DRIVERS
@@ -4474,7 +4474,7 @@ L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/platform/sunxi/sun6i-csi/
-F:	Documentation/devicetree/bindings/media/sun6i-csi.txt
+F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
 
 CW1200 WLAN driver
 M:	Solomon Peachy <pizza@shaftnet.org>
@@ -5667,7 +5667,7 @@ L:	dri-devel@lists.freedesktop.org
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
 F:	drivers/gpu/drm/stm
-F:	Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+F:	Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
 
 DRM DRIVERS FOR TI LCDC
 M:	Jyri Sarha <jsarha@ti.com>
@@ -10163,7 +10163,7 @@ MAXBOTIX ULTRASONIC RANGER IIO DRIVER
 M:	Andreas Klinger <ak@it-klinger.de>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
+F:	Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
 F:	drivers/iio/proximity/mb1232.c
 
 MAXIM MAX77650 PMIC MFD DRIVER
@@ -10466,7 +10466,7 @@ M:	Hugues Fruchet <hugues.fruchet@st.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
-F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
+F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
 F:	drivers/media/platform/stm32/stm32-dcmi.c
 
 MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
@@ -12952,7 +12952,6 @@ M:	Robert Richter <rrichter@marvell.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
-F:	Documentation/devicetree/bindings/pci/pci-thunder-*
 F:	drivers/pci/controller/pci-thunder-*
 
 PCIE DRIVER FOR HISILICON
@@ -15922,7 +15921,7 @@ F:	drivers/*/stm32-*timer*
 F:	drivers/pwm/pwm-stm32*
 F:	include/linux/*/stm32-*tim*
 F:	Documentation/ABI/testing/*timer-stm32
-F:	Documentation/devicetree/bindings/*/stm32-*timer*
+F:	Documentation/devicetree/bindings/*/*stm32-*timer*
 F:	Documentation/devicetree/bindings/pwm/pwm-stm32*
 
 STMMAC ETHERNET DRIVER

drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt

@@ -93,5 +93,5 @@ Some properties are recognized either by SPI and SDIO versions:
    Must contains 64 hexadecimal digits. Not supported in current version.
 
 WFx driver also supports `mac-address` and `local-mac-address` as described in
-Documentation/devicetree/binding/net/ethernet.txt
+Documentation/devicetree/bindings/net/ethernet.txt