Commit f0caa4fc authored by Ranjani Sridharan's avatar Ranjani Sridharan Committed by Mark Brown

ASoC: SOF: ipc4-topology: Save the ALH DAI index during hw_params

The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.

Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: default avatarRander Wang <rander.wang@intel.com>
Reviewed-by: default avatarPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: default avatarRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ebd3b301
......@@ -164,6 +164,7 @@ static int sdw_params_free(struct device *dev, struct sdw_intel_stream_free_data
struct sof_ipc4_copier *ipc4_copier;
ipc4_copier = dai->private;
ipc4_copier->dai_index = 0;
copier_data = &ipc4_copier->data;
/* clear the node ID */
......
......@@ -1700,6 +1700,8 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
*/
i = 0;
list_for_each_entry(w, &sdev->widget_list, list) {
u32 node_type;
if (w->widget->sname &&
strcmp(w->widget->sname, swidget->widget->sname))
continue;
......@@ -1707,7 +1709,10 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
dai = w->private;
alh_copier = (struct sof_ipc4_copier *)dai->private;
alh_data = &alh_copier->data;
blob->alh_cfg.mapping[i].device = alh_data->gtw_cfg.node_id;
node_type = SOF_IPC4_GET_NODE_TYPE(alh_data->gtw_cfg.node_id);
blob->alh_cfg.mapping[i].device = SOF_IPC4_NODE_TYPE(node_type);
blob->alh_cfg.mapping[i].device |=
SOF_IPC4_NODE_INDEX(alh_copier->dai_index);
/*
* The mapping[i] device in ALH blob should be the same as the
......@@ -2830,12 +2835,15 @@ static int sof_ipc4_dai_config(struct snd_sof_dev *sdev, struct snd_sof_widget *
/*
* Do not clear the node ID when this op is invoked with
* SOF_DAI_CONFIG_FLAGS_HW_FREE. It is needed to free the group_ida during
* unprepare.
* unprepare. The node_id for multi-gateway DAI's will be overwritten with the
* group_id during copier's ipc_prepare op.
*/
if (flags & SOF_DAI_CONFIG_FLAGS_HW_PARAMS) {
ipc4_copier->dai_index = data->dai_node_id;
copier_data->gtw_cfg.node_id &= ~SOF_IPC4_NODE_INDEX_MASK;
copier_data->gtw_cfg.node_id |= SOF_IPC4_NODE_INDEX(data->dai_node_id);
}
break;
case SOF_DAI_INTEL_DMIC:
case SOF_DAI_INTEL_SSP:
......
......@@ -45,6 +45,7 @@
#define SOF_IPC4_NODE_INDEX_MASK 0xFF
#define SOF_IPC4_NODE_INDEX(x) ((x) & SOF_IPC4_NODE_INDEX_MASK)
#define SOF_IPC4_NODE_TYPE(x) ((x) << 8)
#define SOF_IPC4_GET_NODE_TYPE(node_id) ((node_id) >> 8)
/* Node ID for SSP type DAI copiers */
#define SOF_IPC4_NODE_INDEX_INTEL_SSP(x) (((x) & 0xf) << 4)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment