This is a patch to the XGI_main.h and XGI_main_26.c file that fixed up a define warrning found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a patch to the XGI_main_26.c file that fixed up a errors "do not initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a patch to the XGI_main.h file that fixed up a errors "do not initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

New driver for AD7190/AD7192/AD7195 4.8 kHz, Ultralow Noise, 24-Bit
Sigma-Delta ADC with PGA

These devices features a dual use data out ready DOUT/RDY output.
In order to avoid contentions on the SPI bus, it's necessary to use
spi bus locking. The DOUT/RDY output must also be wired to an
interrupt capable GPIO.

In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment
for an extended period of time.

Changes since V1:

Add missing documentation.
Remove obsoleted include files.
Fix typos and style issues.
Fix buffer size.
Split ad7192_show() into two functions.
Avoid race condition add mutex.
Abandon IIO_CHAN macro.
Reorder elements in ad7192_platform_data.
Remove driver bus type.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Simple device. Note the sparse scan mask used.

Done from datasheet as very similar to existing parts.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

After a voltage brownout, sensor will now operate correctly.

Page 10 of ISL29018 data sheet and the Intersil Application Note 1534
describe the required initialization sequence:
1. Write 0x00 to register 0x08 (TEST)
2. Write 0x00 to register 0x00 (CMD1)
3. msleep(1)
4. program remaining registers as before
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The AD5933 is a high precision impedance converter system solution
that combines an on-board frequency generator with a 12-bit, 1 MSPS,
analog-to-digital converter (ADC). The frequency generator allows an
external complex impedance to be excited with a known frequency.

The response signal from the impedance is sampled by the on-board ADC
and a discrete Fourier transform (DFT) is processed by an on-chip DSP engine.
The DFT algorithm returns a real (R) and imaginary (I) data-word at each
output frequency.

Changes since V1:

Apply list review feedback:
Consistently use poll_time_jiffies.
Use be|le cpu endian helpers where applicable.
Add various comments.

Changes since V2:

Fix KernelVersion tag in Documentation.
Declare ad5933_default_pdata static.
Fix typos.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The AD7280A monitoring system contains all the functions required for
general purpose monitoring and maintenance of stacked
lithium ion batteries as used in hybrid electric vehicles,
battery backup applications, etc.

Changes since V1:

Make cell channels all type IIO_IN_DIFF, update documentation accordingly.
Remove unused and redundant defines.
Use SI units where applicable.
Remove unnecessary wrapper function.
Remove redundant initialization.
Add comments where requested.
Revise event handler.
Use const where applicable.

Changes since V2:

Remove redundant adc.h include file, scheduled for removal.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Allow dynamic allocation and population of channel spec.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The original definitions were duplicated to reduce tree churn during introduction of chan_spec
registration.  Now there is no point in maintaining the two sets of definitions.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Also get rid of a few function defs where they are only now in one core file
anyway.
Whilst here add mask = 0 to get rid of warning.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Another header unused after chan_spec conversions.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The chan spec conversions and a small amount of pushdown of defines
mean this header is no longer used.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Not longer needed now all devices with gyro channels are using
iio_chan_spec registration.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now all magnetomers are using iio_chan_spec there is no need for
the macros in magnet.h
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iio_chan_spec conversion is straight forward.

Other changes:
* use i2c_smbus_write_byte_data in write_data
* c99 isms to setup various structures.
* move the comment about the scale factor and kill off trivial access func.
* make mode setting code use a bool rather than a ulong.

Ultimately I'd like to get rid of that mode bit entirely and handle it through
core pm routines, but have left it for now.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I still have numerous issues with this driver and it
needs a substantial rewrite.

Whilst doing this patch at least one bug has been fixed (temp
reading didn't have an address) and a number of missing channel
info elements added.

Untested!
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Currently this is the only driver using some of the defines in accel.h.
If these become common we'll just add them to the channel_spec options,
for now push down into this driver.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Still a very odd driver. This patch has the side effect of changing
it's name slightly.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Simple conversion now we've dropped the type attributes.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a rare driver that is so simple it actually gets longer
as a result of this conversion.  Oh well, swings and roundabouts.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This needs confirmation that the devices is happy if another part is
talked to in between the request for a register and the read back.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Lots of minor bits and pieces.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The equivalent should always be done using iio_alllocate_device
with to create a private area for the driver and then iio_priv
to access it.  There may be other uses for a private data pointer
but right now it just leads driver writers astray.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There are some unusual corners in the probe function of this
driver, so may need another look.

V2: Now with the check for allocation success not inverted.
V3: Now with the i2c devdata calls actually being correctly cast.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Jon Brenner <jbrenner@TAOSinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Also push one down into the only driver that actually uses it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Reorder to remove need for definitions currently in header.
Remove ida related utility function defs from header.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix trivial wrong index (no effect on any current drivers).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Clear out all the excessive includes in the *_ring.c files.
Mixture of cut and paste bloat and things needed for code that
has gone away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I will assume these were cut and pastes messup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

More headers now not needed after iio_chan_spec conversions.
A couple of drivers were using helpers from adc.h.

Given these were trivial, they are pushed down into the drivers.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Missing from the iio_chan_spec conversion patches.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>