The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-19-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-18-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-17-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-16-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-15-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-14-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-13-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-12-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-11-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231110152927.70601-10-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20231110152927.70601-9-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-8-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-7-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20231110152927.70601-6-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20231110152927.70601-5-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # 8250_bcm*
Link: https://lore.kernel.org/r/20231110152927.70601-4-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Returning an error code from .remove() makes the driver core emit the
little helpful error message:

	remove callback returned a non-zero value. This will be ignored.

and then remove the device anyhow.

So replace the error return (and with it the little helpful error
message) by a more useful error message.

Fixes: 31815c08 ("serial: sccnxp: Replace pdata.init/exit with regulator API")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231110152927.70601-3-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Returning an error code from .remove() makes the driver core emit the
little helpful error message:

	remove callback returned a non-zero value. This will be ignored.

and then remove the device anyhow. So all resources that were not freed
are leaked in this case. Skipping serial8250_unregister_port() has the
potential to keep enough of the UART around to trigger a use-after-free.

So replace the error return (and with it the little helpful error
message) by a more useful error message and continue to cleanup.

Fixes: e3f0c638 ("serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231110152927.70601-2-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix section mismatch warning messages for riscv and loongarch

 - Remove CONFIG_IA64 left-over from linux/export-internal.h

 - Fix the location of the quotes for UIMAGE_NAME

 - Fix a memory leak bug in Kconfig

* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix memory leak from range properties
  kbuild: Move the single quotes for image name
  linux/export: clean up the IA-64 KSYM_FUNC macro
  modpost: fix section mismatch message for RELA

Pull irq fix from Borislav Petkov:

 - Flush the translation service tables to prevent unpredictable
   behavior on non-coherent GIC devices

* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs

Pull x86 fixes from Borislav Petkov:

 - Ignore invalid x2APIC entries in order to not waste per-CPU data

 - Fix a back-to-back signals handling scenario when shadow stack is in
   use

 - A documentation fix

 - Add Kirill as TDX maintainer

* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Ignore invalid x2APIC entries
  x86/shstk: Delay signal entry SSP write until after user accesses
  x86/Documentation: Indent 'note::' directive for protocol version number note
  MAINTAINERS: Add Intel TDX entry

Pull timer fix from Borislav Petkov:

 - Do the push of pending hrtimers away from a CPU which is being
   offlined earlier in the offlining process in order to prevent a
   deadlock

* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimers: Push pending hrtimers away from outgoing CPU earlier

Pull scheduler fixes from Borislav Petkov:

 - Fix virtual runtime calculation when recomputing a sched entity's
   weights

 - Fix wrongly rejected unprivileged poll requests to the cgroup psi
   pressure files

 - Make sure the load balancing is done by only one CPU

* tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the decision for load balance
  sched: psi: fix unprivileged polling against cgroups
  sched/eevdf: Fix vruntime adjustment on reweight

Pull locking fix from Borislav Petkov:

 - Fix a hardcoded futex flags case which lead to one robust futex test
   failure

* tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix hardcoded flags

Pull perf fix from Borislav Petkov:

 - Make sure the context refcount is transferred too when migrating perf
   events

* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix cpuctx refcounting

Pull SCSI fixes from James Bottomley:
 "Seven small fixes, six in drivers and one in sd.

  The sd fix is so large because it changes a struct pointer to a struct
  but otherwise is fairly simple"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
  scsi: sd: Fix sshdr use in sd_suspend_common()
  scsi: scsi_debug: Delete some bogus error checking
  scsi: scsi_debug: Fix some bugs in sdebug_error_write()
  scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
  scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  scsi: qla2xxx: Fix system crash due to bad pointer access

Pull parisc fixes from Helge Deller:
 "On parisc we still sometimes need writeable stacks, e.g. if programs
  aren't compiled with gcc-14. To avoid issues with the upcoming
  systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
  (for parisc only).

  The other two patches are minor: a bugfix for the soft power-off on
  qemu with 64-bit kernel and prefer strscpy() over strlcpy():

   - Fix power soft-off on qemu

   - Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
     writeable stacks

   - Use strscpy instead of strlcpy in show_cpuinfo()"

* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  prctl: Disable prctl(PR_SET_MDWE) on parisc
  parisc/power: Fix power soft-off when running on qemu
  parisc: Replace strlcpy() with strscpy()

Pull xfs fixes from Chandan Babu:

 - Fix deadlock arising due to intent items in AIL not being cleared
   when log recovery fails

 - Fix stale data exposure bug when remapping COW fork extents to data
   fork

 - Fix deadlock when data device flush fails

 - Fix AGFL minimum size calculation

 - Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
   selected

 - Fix corruption of log inode's extent count field when NREXT64 feature
   is enabled

* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: recovery should not clear di_flushiter unconditionally
  xfs: inode recovery does not validate the recovered inode
  xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
  xfs: fix internal error from AGFL exhaustion
  xfs: up(ic_sema) if flushing data device fails
  xfs: only remap the written blocks in xfs_reflink_end_cow_extent
  XFS: Update MAINTAINERS to catch all XFS documentation
  xfs: abort intent items when recovery intents fail
  xfs: factor out xfs_defer_pending_abort

Pull nfsd fixes from Chuck Lever:

 - Fix several long-standing bugs in the duplicate reply cache

 - Fix a memory leak

* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix checksum mismatches in the duplicate reply cache
  NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
  NFSD: Update nfsd_cache_append() to use xdr_stream
  nfsd: fix file memleak on client_opens_release

Pull smb client fixes from Steve French:

 - multichannel fixes (including a lock ordering fix and an important
   refcounting fix)

 - spnego fix

* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix lock ordering while disabling multichannel
  cifs: fix leak of iface for primary channel
  cifs: fix check of rc in function generate_smb3signingkey
  cifs: spnego: add ';' in HOST_KEY_LEN

systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.

Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+

Merge tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Various fixes for the DM delay target to address regressions
   introduced during the 6.7 merge window

 - Fixes to both DM bufio and the verity target for no-sleep mode,
   to address sleeping while atomic issues

 - Update DM crypt target in response to the treewide change that
   made MAX_ORDER inclusive

* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt: start allocating with MAX_ORDER
  dm-verity: don't use blocking calls from tasklets
  dm-bufio: fix no-sleep mode
  dm-delay: avoid duplicate logic
  dm-delay: fix bugs introduced by kthread mode
  dm-delay: fix a race between delay_presuspend and delay_bio

Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.

Fixes: d0c21947 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+

strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull i2c fixes from Wolfram Sang:
 "Revert a not-working conversion to generic recovery for PXA,
  use proper IO accessors for designware, and use proper PM level
  for ocores to allow accessing interrupt providers late"

* tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ocores: Move system PM hooks to the NOIRQ phase
  i2c: designware: Fix corrupted memory seen in the ISR
  Revert "i2c: pxa: move to generic GPIO recovery"

Pull turbostat updates from Len Brown:

 - Turbostat features are now table-driven (Rui Zhang)

 - Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)

 - Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas
   Pandruvada)

 - misc minor fixes

[ This came in during the merge window, but sorting out the signed tag
  took a while, so thus the late merge   - Linus ]

* tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits)
  tools/power turbostat: version 2023.11.07
  tools/power/turbostat: bugfix "--show IPC"
  tools/power/turbostat: Add initial support for LunarLake
  tools/power/turbostat: Add initial support for ArrowLake
  tools/power/turbostat: Add initial support for GrandRidge
  tools/power/turbostat: Add initial support for SierraForest
  tools/power/turbostat: Add initial support for GraniteRapids
  tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features
  tools/power/turbostat: Move process to root cgroup
  tools/power/turbostat: Handle cgroup v2 cpu limitation
  tools/power/turbostat: Abstrct function for parsing cpu string
  tools/power/turbostat: Handle offlined CPUs in cpu_subset
  tools/power/turbostat: Obey allowed CPUs for system summary
  tools/power/turbostat: Obey allowed CPUs for primary thread/core detection
  tools/power/turbostat: Abstract several functions
  tools/power/turbostat: Obey allowed CPUs during startup
  tools/power/turbostat: Obey allowed CPUs when accessing CPU counters
  tools/power/turbostat: Introduce cpu_allowed_set
  tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL
  tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms
  ...

Pull bcachefs fixes from Kent Overstreet:
 "Lots of small fixes for minor nits and compiler warnings.

  Bigger items:

   - The six locks lost wakeup is finally fixed: six_read_trylock() was
     checking for the waiting bit before decrementing the number of
     readers - validated the fix with a torture test.

   - Fix for a memory reclaim issue: when needing to reallocate a key
     cache key, we now do our usual GFP_NOWAIT; unlock(); GFP_KERNEL
     dance.

   - Multiple deleted inodes btree fixes

   - Fix an issue in fsck, where i_nlink would be recalculated
     incorrectly for hardlinked files if a snapshot had ever been taken.

   - Kill journal pre-reservations: This is a bigger patch than I would
     normally send at this point, but it deletes code and it fixes some
     of our tests that would sporadically die with the journal getting
     stuck, and it's a performance improvement, too"

* tag 'bcachefs-2023-11-17' of https://evilpiepirate.org/git/bcachefs: (22 commits)
  bcachefs: Fix missing locking for dentry->d_parent access
  bcachefs: six locks: Fix lost wakeup
  bcachefs: Fix no_data_io mode checksum check
  bcachefs: Fix bch2_check_nlinks() for snapshots
  bcachefs: Don't decrease BTREE_ITER_MAX when LOCKDEP=y
  bcachefs: Disable debug log statements
  bcachefs: Fix missing transaction commit
  bcachefs: Fix error path in bch2_mount()
  bcachefs: Fix potential sleeping during mount
  bcachefs: Fix iterator leak in may_delete_deleted_inode()
  bcachefs: Kill journal pre-reservations
  bcachefs: Check for nonce offset inconsistency in data_update path
  bcachefs: Make sure to drop/retake btree locks before reclaim
  bcachefs: btree_trans->write_locked
  bcachefs: Run btree key cache shrinker less aggressively
  bcachefs: Split out btree_key_cache_types.h
  bcachefs: Guard against insufficient devices to create stripes
  bcachefs: Fix null ptr deref in bch2_backpointer_get_node()
  bcachefs: Fix multiple -Warray-bounds warnings
  bcachefs: Use DECLARE_FLEX_ARRAY() helper and fix multiple -Warray-bounds warnings
  ...

Merge tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Thirteen hotfixes. Seven are cc:stable and the remainder pertain to
  post-6.6 issues or aren't considered suitable for backporting"

* tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: more ptep_get() conversion
  parisc: fix mmap_base calculation when stack grows upwards
  mm/damon/core.c: avoid unintentional filtering out of schemes
  mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
  mm/damon/sysfs-schemes: handle tried region directory allocation failure
  mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
  mm/damon/sysfs: check error from damon_sysfs_update_target()
  mm: fix for negative counter: nr_file_hugepages
  selftests/mm: add hugetlb_fault_after_madv to .gitignore
  selftests/mm: restore number of hugepages
  selftests: mm: fix some build warnings
  selftests: mm: skip whole test instead of failure
  mm/damon/sysfs: eliminate potential uninitialized variable warning

Pull block fix from Jens Axboe:
 "Just a single fix from Christoph/Ming, fixing a case where integrity
  IO could be called without having an appropriate queue reference"

* tag 'block-6.7-2023-11-17' of git://git.kernel.dk/linux:
  blk-mq: make sure active queue usage is held for bio_integrity_prep()