Pull power management updates from Rafael Wysocki:
 "These include two new drivers (cpufreq driver for Apple SoC CPU
  P-states and the SCMI Powercap based power capping driver), other new
  hardware support and driver extensions (Qualcomm cpufreq driver and
  its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
  a bunch of fixes and cleanups all over and a cpupower utility update
  including new features related to RAPL support.

  Specifics:

   - Fix nasty and hard to debug race condition introduced by mistake in
     the runtime PM core code and clean up that code somewhat on top of
     the fix (Rafael Wysocki)

   - Generalize of_perf_domain_get_sharing_cpumask phandle format
     (Hector Martin)

   - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)

   - Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
      - CPU clock provider support
      - Generic cleanups or reorganization
      - Potential memleak fix
      - Fix of the return value of cpufreq_driver->get()

   - Update Qualcomm cpufreq driver's DT bindings (Manivannan
     Sadhasivam, Rob Herring, Melody Olvera):
      - Support for CPU clock provider
      - Missing cache-related properties fixes
      - Support for QDU1000/QRU1000

   - Add support for ti,am625 SoC and enable build of ti-cpufreq for
     ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)

   - Use flexible array to simplify memory allocation in the tegra186
     cpufreq driver (Christophe JAILLET)

   - Convert cpufreq statistics code to use sysfs_emit_at() (ye
     xingchen)

   - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
     Gherdovich)

   - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
     driver (Xiongfeng Wang)

   - Initialize the kobj_unregister completion before calling
     kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)

   - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
     Nathan Chancellor)

   - Make intel_pstate accept initial EPP value of 0x80 (Srinivas
     Pandruvada)

   - Make read-only array sys_clk_src in the SPEAr cpufreq driver static
     (Colin Ian King)

   - Make array speeds in the longhaul cpufreq driver static (Colin Ian
     King)

   - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
     Shevchenko)

   - Drop a reference to CVS from cpufreq documentation (Conghui Wang)

   - Improve kernel messages printed by the PSCI cpuidle driver (Ulf
     Hansson)

   - Make the DT cpuidle driver return the correct number of parsed idle
     states, clean it up and clarify a comment in it (Ulf Hansson)

   - Modify the tasks freezing code to avoid using pr_cont() and refine
     an error message printed by it (Rafael Wysocki)

   - Make the hibernation core code complain about memory map mismatches
     during resume to help diagnostics (Xueqin Luo)

   - Fix mistake in a kerneldoc comment in the hibernation code
     (xiongxin)

   - Reverse the order of performance and enabling operations in the
     generic power domains code (Abel Vesa)

   - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
     the generic power domains code (Abel Vesa)

   - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
     Guo)

   - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)

   - Drop generic power domain status manipulation during hibernate
     restore (Shawn Guo)

   - Fix compiler warnings with make W=1 in the idle_inject power
     capping driver (Srinivas Pandruvada)

   - Use kstrtobool() instead of strtobool() in the power capping sysfs
     interface (Christophe JAILLET)

   - Add SCMI Powercap based power capping driver (Cristian Marussi)

   - Add Emerald Rapids support to the intel-uncore-freq driver (Artem
     Bityutskiy)

   - Repair slips in kernel-doc comments in the generic notifier code
     (Lukas Bulwahn)

   - Fix several DT issues in the OPP library reorganize code around
     opp-microvolt-<named> DT property (Viresh Kumar)

   - Allow any of opp-microvolt, opp-microamp, or opp-microwatt
     properties to be present without the others present (James
     Calligeros)

   - Fix clock-latency-ns property in DT example (Serge Semin)

   - Add a private governor_data for devfreq governors (Kant Fan)

   - Reorganize devfreq code to use device_match_of_node() and
     devm_platform_get_and_ioremap_resource() instead of open coding
     them (ye xingchen, Minghao Chi)

   - Make cpupower choose base_cpu to display default cpupower details
     instead of picking CPU 0 (Saket Kumar Bhaskar)

   - Add Georgian translation to cpupower documentation (Zurab
     Kargareteli)

   - Introduce powercap intel-rapl library, powercap-info command, and
     RAPL monitor into cpupower (Thomas Renninger)"

* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  PM: runtime: Adjust white space in the core code
  cpufreq: Remove CVS version control contents from documentation
  cpufreq: stats: Convert to use sysfs_emit_at() API
  cpufreq: ACPI: Only set boost MSRs on supported CPUs
  PM: sleep: Refine error message in try_to_freeze_tasks()
  PM: sleep: Avoid using pr_cont() in the tasks freezing code
  PM: runtime: Relocate rpm_callback() right after __rpm_callback()
  PM: runtime: Do not call __rpm_callback() from rpm_idle()
  PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
  PM / devfreq: event: Use device_match_of_node()
  PM / devfreq: Use device_match_of_node()
  powercap: idle_inject: Fix warnings with make W=1
  PM: hibernate: Complain about memory map mismatches during resume
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
  cpufreq: tegra186: Use flexible array to simplify memory allocation
  cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
  cpupower: Introduce powercap intel-rapl library and powercap-info command
  cpupower: Add Georgian translation
  cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
  cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
  ...

Pull misc x86 updates from Thomas Gleixner:
 "Updates for miscellaneous x86 areas:

   - Reserve a new boot loader type for barebox which is usally used on
     ARM and MIPS, but can also be utilized as EFI payload on x86 to
     provide watchdog-supervised boot up.

   - Consolidate the native and compat 32bit signal handling code and
     split the 64bit version out into a separate source file

   - Switch the ESPFIX random usage to get_random_long()"

* tag 'x86-misc-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/espfix: Use get_random_long() rather than archrandom
  x86/signal/64: Move 64-bit signal code to its own file
  x86/signal/32: Merge native and compat 32-bit signal code
  x86/signal: Add ABI prefixes to frame setup functions
  x86/signal: Merge get_sigframe()
  x86: Remove __USER32_DS
  signal/compat: Remove compat_sigset_t override
  x86/signal: Remove sigset_t parameter from frame setup functions
  x86/signal: Remove sig parameter from frame setup functions
  Documentation/x86/boot: Reserve type_of_loader=13 for barebox

Pull timer updates from Thomas Gleixner:
 "Updates for timers, timekeeping and drivers:

  Core:

   - The timer_shutdown[_sync]() infrastructure:

     Tearing down timers can be tedious when there are circular
     dependencies to other things which need to be torn down. A prime
     example is timer and workqueue where the timer schedules work and
     the work arms the timer.

     What needs to prevented is that pending work which is drained via
     destroy_workqueue() does not rearm the previously shutdown timer.
     Nothing in that shutdown sequence relies on the timer being
     functional.

     The conclusion was that the semantics of timer_shutdown_sync()
     should be:
	- timer is not enqueued
    	- timer callback is not running
    	- timer cannot be rearmed

     Preventing the rearming of shutdown timers is done by discarding
     rearm attempts silently.

     A warning for the case that a rearm attempt of a shutdown timer is
     detected would not be really helpful because it's entirely unclear
     how it should be acted upon. The only way to address such a case is
     to add 'if (in_shutdown)' conditionals all over the place. This is
     error prone and in most cases of teardown not required all.

   - The real fix for the bluetooth HCI teardown based on
     timer_shutdown_sync().

     A larger scale conversion to timer_shutdown_sync() is work in
     progress.

   - Consolidation of VDSO time namespace helper functions

   - Small fixes for timer and timerqueue

  Drivers:

   - Prevent integer overflow on the XGene-1 TVAL register which causes
     an never ending interrupt storm.

   - The usual set of new device tree bindings

   - Small fixes and improvements all over the place"

* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
  dt-bindings: timer: renesas,tmu: Add r8a779g0 support
  clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
  clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
  clocksource/drivers/timer-ti-dm: Clear settings on probe and free
  clocksource/drivers/timer-ti-dm: Make timer_get_irq static
  clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
  clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
  clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
  dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
  clockevents: Repair kernel-doc for clockevent_delta2ns()
  clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
  clocksource/drivers/sh_cmt: Access registers according to spec
  vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
  Bluetooth: hci_qca: Fix the teardown problem for real
  timers: Update the documentation to reflect on the new timer_shutdown() API
  timers: Provide timer_shutdown[_sync]()
  timers: Add shutdown mechanism to the internal functions
  timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
  ...

Pull x86 cleanups from Thomas Gleixner:
 "A set of x86 cleanups:

   - Rework the handling of x86_regset for 32 and 64 bit.

     The original implementation tried to minimize the allocation size
     with quite some hard to understand and fragile tricks. Make it
     robust and straight forward by separating the register enumerations
     for 32 and 64 bit completely.

   - Add a few missing static annotations

   - Remove the stale unused setup_once() assembly function

   - Address a few minor static analysis and kernel-doc warnings"

* tag 'x86-cleanups-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm/32: Remove setup_once()
  x86/kaslr: Fix process_mem_region()'s return value
  x86: Fix misc small issues
  x86/boot: Repair kernel-doc for boot_kstrtoul()
  x86: Improve formatting of user_regset arrays
  x86: Separate out x86_regset for 32 and 64 bit
  x86/i8259: Make default_legacy_pic static
  x86/tsc: Make art_related_clocksource static

Pull x86 apic update from Thomas Gleixner:
 "A set of changes for the x86 APIC code:

   - Handle the case where x2APIC is enabled and locked by the BIOS on a
     kernel with CONFIG_X86_X2APIC=n gracefully.

     Instead of a panic which does not make it to the graphical console
     during very early boot, simply disable the local APIC completely
     and boot with the PIC and very limited functionality, which allows
     to diagnose the issue

   - Convert x86 APIC device tree bindings to YAML

   - Extend x86 APIC device tree bindings to configure interrupt
     delivery mode and handle this in during init. This allows to boot
     with device tree on platforms which lack a legacy PIC"

* tag 'x86-apic-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/of: Add support for boot time interrupt delivery mode configuration
  x86/of: Replace printk(KERN_LVL) with pr_lvl()
  dt-bindings: x86: apic: Introduce new optional bool property for lapic
  dt-bindings: x86: apic: Convert Intel's APIC bindings to YAML schema
  x86/of: Remove unused early_init_dt_add_memory_arch()
  x86/apic: Handle no CONFIG_X86_X2APIC on systems with x2APIC enabled by BIOS

Pull CPU hotplug updates from Thomas Gleixner:
 "A small set of updates for CPU hotplug:

   - Prevent stale CPU hotplug state in the cpu_down() path which was
     detected by stress testing the sysfs interface

   - Ensure that the target CPU hotplug state for the boot CPU is
     CPUHP_ONLINE instead of the compile time init value CPUHP_OFFLINE.

   - Switch back to the original behaviour of warning when a CPU hotplug
     callback in the DYING/STARTING section returns an error code.

     Otherwise a buggy callback can leave the CPUs in an non recoverable
     state"

* tag 'smp-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Do not bail-out in DYING/STARTING sections
  cpu/hotplug: Set cpuhp target for boot cpu
  cpu/hotplug: Make target_store() a nop when target == state

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt core and driver subsystem:

  The bulk is the rework of the MSI subsystem to support per device MSI
  interrupt domains. This solves conceptual problems of the current
  PCI/MSI design which are in the way of providing support for
  PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.

  IMS (Interrupt Message Store] is a new specification which allows
  device manufactures to provide implementation defined storage for MSI
  messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
  message store which is uniform accross all devices). The PCI/MSI[-X]
  uniformity allowed us to get away with "global" PCI/MSI domains.

  IMS not only allows to overcome the size limitations of the MSI-X
  table, but also gives the device manufacturer the freedom to store the
  message in arbitrary places, even in host memory which is shared with
  the device.

  There have been several attempts to glue this into the current MSI
  code, but after lengthy discussions it turned out that there is a
  fundamental design problem in the current PCI/MSI-X implementation.
  This needs some historical background.

  When PCI/MSI[-X] support was added around 2003, interrupt management
  was completely different from what we have today in the actively
  developed architectures. Interrupt management was completely
  architecture specific and while there were attempts to create common
  infrastructure the commonalities were rudimentary and just providing
  shared data structures and interfaces so that drivers could be written
  in an architecture agnostic way.

  The initial PCI/MSI[-X] support obviously plugged into this model
  which resulted in some basic shared infrastructure in the PCI core
  code for setting up MSI descriptors, which are a pure software
  construct for holding data relevant for a particular MSI interrupt,
  but the actual association to Linux interrupts was completely
  architecture specific. This model is still supported today to keep
  museum architectures and notorious stragglers alive.

  In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
  kernel, which was creating yet another architecture specific mechanism
  and resulted in an unholy mess on top of the existing horrors of x86
  interrupt handling. The x86 interrupt management code was already an
  incomprehensible maze of indirections between the CPU vector
  management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
  implementation.

  At roughly the same time ARM struggled with the ever growing SoC
  specific extensions which were glued on top of the architected GIC
  interrupt controller.

  This resulted in a fundamental redesign of interrupt management and
  provided the today prevailing concept of hierarchical interrupt
  domains. This allowed to disentangle the interactions between x86
  vector domain and interrupt remapping and also allowed ARM to handle
  the zoo of SoC specific interrupt components in a sane way.

  The concept of hierarchical interrupt domains aims to encapsulate the
  functionality of particular IP blocks which are involved in interrupt
  delivery so that they become extensible and pluggable. The X86
  encapsulation looks like this:

                                            |--- device 1
     [Vector]---[Remapping]---[PCI/MSI]--|...
                                            |--- device N

  where the remapping domain is an optional component and in case that
  it is not available the PCI/MSI[-X] domains have the vector domain as
  their parent. This reduced the required interaction between the
  domains pretty much to the initialization phase where it is obviously
  required to establish the proper parent relation ship in the
  components of the hierarchy.

  While in most cases the model is strictly representing the chain of IP
  blocks and abstracting them so they can be plugged together to form a
  hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
  hardware it's clear that the actual PCI/MSI[-X] interrupt controller
  is not a global entity, but strict a per PCI device entity.

  Here we took a short cut on the hierarchical model and went for the
  easy solution of providing "global" PCI/MSI domains which was possible
  because the PCI/MSI[-X] handling is uniform across the devices. This
  also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
  unchanged which in turn made it simple to keep the existing
  architecture specific management alive.

  A similar problem was created in the ARM world with support for IP
  block specific message storage. Instead of going all the way to stack
  a IP block specific domain on top of the generic MSI domain this ended
  in a construct which provides a "global" platform MSI domain which
  allows overriding the irq_write_msi_msg() callback per allocation.

  In course of the lengthy discussions we identified other abuse of the
  MSI infrastructure in wireless drivers, NTB etc. where support for
  implementation specific message storage was just mindlessly glued into
  the existing infrastructure. Some of this just works by chance on
  particular platforms but will fail in hard to diagnose ways when the
  driver is used on platforms where the underlying MSI interrupt
  management code does not expect the creative abuse.

  Another shortcoming of today's PCI/MSI-X support is the inability to
  allocate or free individual vectors after the initial enablement of
  MSI-X. This results in an works by chance implementation of VFIO (PCI
  pass-through) where interrupts on the host side are not set up upfront
  to avoid resource exhaustion. They are expanded at run-time when the
  guest actually tries to use them. The way how this is implemented is
  that the host disables MSI-X and then re-enables it with a larger
  number of vectors again. That works by chance because most device
  drivers set up all interrupts before the device actually will utilize
  them. But that's not universally true because some drivers allocate a
  large enough number of vectors but do not utilize them until it's
  actually required, e.g. for acceleration support. But at that point
  other interrupts of the device might be in active use and the MSI-X
  disable/enable dance can just result in losing interrupts and
  therefore hard to diagnose subtle problems.

  Last but not least the "global" PCI/MSI-X domain approach prevents to
  utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
  that IMS is not longer providing a uniform storage and configuration
  model.

  The solution to this is to implement the missing step and switch from
  global PCI/MSI domains to per device PCI/MSI domains. The resulting
  hierarchy then looks like this:

                              |--- [PCI/MSI] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N

  which in turn allows to provide support for multiple domains per
  device:

                              |--- [PCI/MSI] device 1
                              |--- [PCI/IMS] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N
                              |--- [PCI/IMS] device N

  This work converts the MSI and PCI/MSI core and the x86 interrupt
  domains to the new model, provides new interfaces for post-enable
  allocation/free of MSI-X interrupts and the base framework for
  PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
  driver.

  There is work in progress to convert ARM over which will replace the
  platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
  "solutions" are in the works as well.

  Drivers:

   - Updates for the LoongArch interrupt chip drivers

   - Support for MTK CIRQv2

   - The usual small fixes and updates all over the place"

* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
  irqchip/ti-sci-inta: Fix kernel doc
  irqchip/gic-v2m: Mark a few functions __init
  irqchip/gic-v2m: Include arm-gic-common.h
  irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
  iommu/amd: Enable PCI/IMS
  iommu/vt-d: Enable PCI/IMS
  x86/apic/msi: Enable PCI/IMS
  PCI/MSI: Provide pci_ims_alloc/free_irq()
  PCI/MSI: Provide IMS (Interrupt Message Store) support
  genirq/msi: Provide constants for PCI/IMS support
  x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
  PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
  PCI/MSI: Provide prepare_desc() MSI domain op
  PCI/MSI: Split MSI-X descriptor setup
  genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
  genirq/msi: Provide msi_domain_alloc_irq_at()
  genirq/msi: Provide msi_domain_ops:: Prepare_desc()
  genirq/msi: Provide msi_desc:: Msi_data
  genirq/msi: Provide struct msi_map
  x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
  ...

Pull debugobjects update from Thomas Gleixner:
 "A single update for debugobjects:

  Add the object pointer to the debug output for better correlation with
  other debug facilities"

* tag 'core-debugobjects-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Print object pointer in debug_print_object()

Pull x86 fixes from Thomas Gleixner:
 "Three small x86 fixes which did not make it into 6.1:

   - Remove a superfluous noinline which prevents GCC-7.3 to optimize a
     stub function away

   - Allow uprobes on REP NOP and do not treat them like word-sized
     branch instructions

   - Make the VDSO symbol export of __vdso_sgx_enter_enclave() depend on
     CONFIG_X86_SGX to prevent build failures with newer LLVM versions
     which rightfully detect that there is no function behind the
     symbol"

* tag 'x86-urgent-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Conditionally export __vdso_sgx_enter_enclave()
  uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
  x86/alternative: Remove noinline from __ibt_endbr_seal[_end]() stubs

Pull s390 updates from Alexander Gordeev:

 - Factor out handle_write() function and simplify 3215 console write
   operation

 - When 3170 terminal emulator is connected to the 3215 console driver
   the boot time could be very long due to limited buffer space or
   missing operator input. Add con3215_drop command line parameter and
   con3215_drop sysfs attribute file to instruct the kernel drop console
   data when such conditions are met

 - Fix white space errors in 3215 console driver

 - Move enum paiext_mode definition to a header file and rename it to
   paievt_mode to indicate this is now used for several events. Rename
   PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with
   PAI_MODE_SAMPLING

 - Simplify the logic of PMU pai_crypto mapped buffer reference counter
   and make it consistent with PMU pai_ext

 - Rename PMU pai_crypto mapped buffer structure member users to
   active_events to make it consistent with PMU pai_ext

 - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This
   results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per
   2G hugetlb page (~1.6%)

 - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and
   scrap s390-specific versions

 - The generic percpu setup code does not expect the s390-like
   implementation and emits a warning. To get rid of that warning and
   provide sane CPU-to-node and CPU-to-CPU distance mappings implementat
   a minimal version of setup_per_cpu_areas()

 - Use kstrtobool() instead of strtobool() for re-IPL sysfs device
   attributes

 - Avoid unnecessary lookup of a pointer to MSI descriptor when setting
   IRQ affinity for a PCI device

 - Get rid of "an incompatible function type cast" warning by changing
   debug_sprintf_format_fn() function prototype so it matches the
   debug_format_proc_t function type

 - Remove unused info_blk_hdr__pcpus() and get_page_state() functions

 - Get rid of clang "unused unused insn cache ops function" warning by
   moving s390_insn definition to a private header

 - Get rid of clang "unused function" warning by making function
   raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is
   enabled

 - Use kstrobool() to parse sclp_con_drop parameter to make it identical
   to the con3215_drop parameter and allow passing values like "yes" and
   "true"

 - Use sysfs_emit() for all SCLP sysfs show functions, which is the
   current standard way to generate output strings

 - Make SCLP con_drop sysfs attribute also writable and allow to change
   its value during runtime. This makes SCLP console drop handling
   consistent with the 3215 device driver

 - Virtual and physical addresses are indentical on s390. However, there
   is still a confusion when pointers are directly casted to physical
   addresses or vice versa. Use correct address converters
   virt_to_phys() and phys_to_virt() for s390 channel IO drivers

 - Support for power managemant has been removed from s390 since quite
   some time. Remove unused power managemant code from the appldata
   device driver

 - Allow memory tools like KASAN see memory accesses from the checksum
   code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does

 - Add support of ECKD DASDs disks so it could be used as boot and dump
   devices

 - Follow checkpatch recommendations and use octal values instead of
   S_IRUGO and S_IWUSR for dump device attributes in sysfs

 - Changes to vx-insn.h do not cause a recompile of C files that use
   asm(".include \"asm/vx-insn.h\"\n") magic to access vector
   instruction macros from inline assemblies. Add wrapper include header
   file to avoid this problem

 - Use vector instruction macros instead of byte patterns to increase
   register validation routine readability

 - The current machine check register validation handling does not take
   into account various scenarios and might lead to killing a wrong user
   process or potentially ignore corrupted FPU registers. Simplify logic
   of the machine check handler and stop the whole machine if the
   previous context was kerenel mode. If the previous context was user
   mode, kill the current task

 - Introduce sclp_emergency_printk() function which can be used to emit
   a message in emergency cases. It is supposed to be used in cases
   where regular console device drivers may not work anymore, e.g.
   unrecoverable machine checks

   Keep the early Service-Call Control Block so it can also be used
   after initdata has been freed to allow sclp_emergency_printk()
   implementation

 - In case a system will be stopped because of an unrecoverable machine
   check error print the machine check interruption code to give a hint
   of what went wrong

 - Move storage error checking from the assembly entry code to C in
   order to simplify machine check handling. Enter the handler with DAT
   turned on, which simplifies the entry code even more

 - The machine check extended save areas are allocated using a private
   "nmi_save_areas" slab cache which guarantees a required power-of-two
   alignment. Get rid of that cache in favour of kmalloc()

* tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits)
  s390/nmi: get rid of private slab cache
  s390/nmi: move storage error checking back to C, enter with DAT on
  s390/nmi: print machine check interruption code before stopping system
  s390/sclp: introduce sclp_emergency_printk()
  s390/sclp: keep sclp_early_sccb
  s390/nmi: rework register validation handling
  s390/nmi: use vector instruction macros instead of byte patterns
  s390/vx: add vx-insn.h wrapper include file
  s390/ipl: use octal values instead of S_* macros
  s390/ipl: add eckd dump support
  s390/ipl: add eckd support
  vfio/ccw: identify CCW data addresses as physical
  vfio/ccw: sort out physical vs virtual pointers usage
  s390/checksum: support GENERIC_CSUM, enable it for KASAN
  s390/appldata: remove power management callbacks
  s390/cio: sort out physical vs virtual pointers usage
  s390/sclp: allow to change sclp_console_drop during runtime
  s390/sclp: convert to use sysfs_emit()
  s390/sclp: use kstrobool() to parse sclp_con_drop parameter
  s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE
  ...

Pull m68k updates from Geert Uytterhoeven:

 - remove an unused function involving a non-explictly signed char type

 - reword a (correct) comment to stop the inflood of (incorrect) patches
   trying to fix it

 - defconfig updates

* tag 'm68k-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.1-rc1
  m68k: mac: Reword comment using double "in"
  m68k: mac: Remove unused rbv_set_video_bpp()

Pull MIPS updates from Thomas Bogendoerfer:

 - DT cleanups

 - fix for early use of kzalloc on mt7621 platform

 - cleanups and fixes

* tag 'mips_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (21 commits)
  MIPS: OCTEON: warn only once if deprecated link status is being used
  MIPS: BCM63xx: Add check for NULL for clk in clk_enable
  platform/mips: Adjust Kconfig to keep consistency
  MIPS: OCTEON: cvmx-bootmem: use strscpy() to instead of strncpy()
  MIPS: mscc: jaguar2: Fix pca9545 i2c-mux node names
  mips/pci: use devm_platform_ioremap_resource()
  mips: ralink: mt7621: do not use kzalloc too early
  mips: ralink: mt7621: soc queries and tests as functions
  mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
  MIPS: Restore symbol versions for copy_page_cpu and clear_page_cpu
  mips: dts: remove label = "cpu" from DSA dt-binding
  mips: ralink: mt7621: change DSA port labels to generic naming
  mips: ralink: mt7621: fix phy-mode of external phy on GB-PC2
  MIPS: vpe-cmp: fix possible memory leak while module exiting
  MIPS: vpe-mt: fix possible memory leak while module exiting
  dt-bindings: mips: brcm: add Broadcom SoCs bindings
  dt-bindings: mips: add CPU bindings for MIPS architecture
  mips: dts: brcm: bcm7435: add "interrupt-names" for NAND controller
  mips: dts: bcm63268: add TWD block timer
  MIPS: Use "grep -E" instead of "egrep"
  ...

Pull xen updates from Juergen Gross:

 - fix memory leaks in error paths

 - add support for virtio PCI-devices in Xen guests on ARM

 - two minor fixes

* tag 'for-linus-6.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
  x86/xen: Fix memory leak in xen_init_lock_cpu()
  x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
  xen: fix xen.h build for CONFIG_XEN_PVH=y
  xen/virtio: Handle PCI devices which Host controller is described in DT
  xen/virtio: Optimize the setup of "xen-grant-dma" devices

Merge tag 'tag-chrome-platform-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "New drivers
   - Driver for ChromeOS human presence sensor

  Cleanups:
   - Add missing property in dt-binding example.
   - Update the availability of properties in dt-binding.
   - Separate dt-binding for ChromeOS fingerprint sensor.

  Improvements:
   - Set PROBE_PREFER_ASYNCHRONOUS for some drivers for shortening boot time.

  Fixes:
   - Fix an use-after-free in cros_ec_typec.

  And minor fixes and cleanups"

* tag 'tag-chrome-platform-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_typec: zero out stale pointers
  platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
  platform/chrome: cros_ec: Convert to i2c's .probe_new()
  platform/chrome: cros_ec_lpc: Force synchronous probe
  platform/chrome: cros_ec_spi: Set PROBE_PREFER_ASYNCHRONOUS
  platform/chrome: cros_ec_lightbar: Set PROBE_PREFER_ASYNCHRONOUS
  platform/chrome: cros_ec_debugfs: Set PROBE_PREFER_ASYNCHRONOUS
  platform/chrome: cros_ec_lpc: Mark PROBE_PREFER_ASYNCHRONOUS
  platform/chrome: cros_ec_lpc: Move mec_init to device probe
  platform/chrome: Use kstrtobool() instead of strtobool()
  platform/chrome: cros_ec_lpc_mec: remove cros_ec_lpc_mec_destroy()
  dt-bindings: cros-ec: Add ChromeOS fingerprint binding
  dt-bindings: cros-ec: Reorganize and enforce property availability
  platform/chrome: cros_hps_i2c: make remove callback return void
  platform/chrome: add a driver for HPS

Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - Intel:
      - PMC: Add support for Meteor Lake
      - Intel On Demand: various updates

 - Ideapad-laptop:
      - Add support for various Fn keys on new models
      - Fix touchpad on/off handling in a generic way to avoid having to
        add more and more quirks

 - Android x86 tablets:
      - Add support for two more X86 Android tablet models

 - New Dell WMI DDV driver

 - Miscellaneous cleanups and small bugfixes

* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
  platform/mellanox: mlxbf-pmc: Fix event typo
  platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
  platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
  platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
  platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
  platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
  platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
  platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
  platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
  platform/x86: wireless-hotkey: use ACPI HID as phys
  platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
  platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
  platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
  platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
  platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
  platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
  platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
  tools/arch/x86: intel_sdsi: Add support for reading meter certificates
  tools/arch/x86: intel_sdsi: Add support for new GUID
  tools/arch/x86: intel_sdsi: Read more On Demand registers
  ...

Pull ARM SoC DT updates from Arnd Bergmann:
 "The devicetree changes contain exactly 1000 non-merge changesets,
  including a number of new arm64 SoC variants from Qualcomm and Apple,
  as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
  variants.

  While we have occasionally merged support for non-arm SoCs in the
  past, this is now the normal path for riscv devicetree files.

  The most notable changes, by SoC platform, are:

   - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
     now have initial support. This is particularly nice as I am typing
     this on a T6002 Mac Studio with only a small number of driver
     patches.

   - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
     SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
     (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
     650) are all mobile phone chips that are closely related to others
     we already support.

     Adding those helps support more phones and we add several models
     from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
     3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
     Google (Pixel 3a).

     There are also new variants of the Herobrine and Trogdor chromebook
     motherboards. SA8540P is an automotive SoC used in the Qdrive-3
     development platform

   - Rockchips gains no new SoC variants, but a lot of new boards: three
     mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
     more Anbernic gaming systems based on RK3566 and a number of other
     RK356x based single-board computers.

   - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
     the newly added RZ/Five is based on the same design, this now gets
     reorganized in order to share most of the dts description between
     the two and add the RZ/Five SMARC EVK board support.

  Aside from that, there are the usual changes all over the tree:

   - New boards on other platforms contain two ASpeed BMC users, two
     Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
     Kobo Aura2 ebook reader, two i.MX8 based development boards, two
     Uniphier Pro5 development boards, the STM32MP1 testbench board from
     DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
     Helio X10 based Sony Xperia M5 phone.

   - The Starfive JH7100 source gets reorganized in order to support the
     VisionFive V1 board.

   - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
     ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
     Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
     spear, ... The treewide cleanups now have a lot of fixes for cache
     nodes and other binding violoations.

   - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
     Renesas platforms, adding a lot more on-chip device support

   - A rework of the way that DTB overlays are built"

* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
  arm64: dts: apple: t6002: Fix GPU power domains
  arm64: dts: apple: t600x-pmgr: Fix search & replace typo
  arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
  arm64: dts: apple: Rename dart-sio* to sio-dart*
  arch: arm64: apple: t600x: Use standard "iommu" node name
  arch: arm64: apple: t8103: Use standard "iommu" node name
  ARM: dts: socfpga: Fix pca9548 i2c-mux node name
  dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
  dt-bindings: iio: adc: qcom,spmi-vadc: extend example
  arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
  arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
  arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
  arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
  arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
  arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
  arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
  arm64: dts: qcom: sm8450: align MMC node names with dtschema
  arm64: dts: qcom: sc7180-trogdor: use generic node names
  arm64: dts: qcom: sm8450-hdk: add sound support
  arm64: dts: qcom: sm8450: add Soundwire and LPASS
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are few major updates in the SoC specific drivers, mainly the
  usual reworks and support for variants of the existing SoC. While this
  remains Arm centric for the most part, the branch now also contains
  updates to risc-v and loongarch specific code in drivers/soc/.

  Notable changes include:

   - Support for the newly added Qualcomm Snapdragon variants (MSM8956,
     MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
     rpmh, rpm, spm and powerdomain drivers.

   - Documentation for the somewhat controversial qcom,board-id
     properties that are required for booting a number of machines

   - A new SoC identification driver for the loongson-2 (loongarch)
     platform

   - memory controller updates for stm32, tegra, and renesas.

   - a new DT binding to better describe LPDDR2/3/4/5 chips in the
     memory controller subsystem

   - Updates for Tegra specific drivers across multiple subsystems,
     improving support for newer SoCs and better identification

   - Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
     Mediatek and Marvell SoC drivers"

* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
  soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
  soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
  dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
  soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
  soc: qcom: Select REMAP_MMIO for LLCC driver
  soc: qcom: rpmpd: Add SM4250 support
  dt-bindings: power: rpmpd: Add SM4250 support
  dt-bindings: soc: qcom: aoss: Add compatible for SM8550
  soc: qcom: llcc: Add configuration data for SM8550
  dt-bindings: arm: msm: Add LLCC compatible for SM8550
  soc: qcom: llcc: Add v4.1 HW version support
  soc: qcom: socinfo: Add SM8550 ID
  soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
  soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
  soc: qcom: rpmhpd: Add SM8550 power domains
  dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
  soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
  ...

Pull ARM SoC code updates from Arnd Bergmann:
 "This time there are only fairly minor cleanups across the i.MX,
  ixp4xx, ux500 and renesas platforms.

  The only notable update is a change to the keystone2 platform to
  switch switch it over to standard PSCI SMP bringup, which apparently
  was present in the shipped firmware almost from the start"

* tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: ixp4xx: Remove unused debug iomap
  MAINTAINERS: Add DHCOR to the DH electronic i.MX6 board support
  ARM: ixp4xx: Remove unused static map
  MAINTAINERS: adjust ARM/INTEL IXP4XX ARM ARCHITECTURE to ixp4xx clean-up
  ARM: imx3: Remove unneeded #include <linux/pinctrl/machine.h>
  ARM: mxs: Remove unneeded #include <linux/pinctrl/consumer.h>
  riscv: Kconfig.socs: Add ARCH_RENESAS kconfig option
  ARM: ux500: Drop unused register file
  ARM: ux500: do not directly dereference __iomem
  arm/mach-ux500: fix repeated words in comments
  arm64: renesas: Drop selecting GPIOLIB and PINCTRL
  ARM: shmobile: Drop selecting GPIOLIB and PINCTRL
  ARM: keystone: Replace platform SMP with PSCI
  soc: renesas: Kconfig: Explicitly select GPIOLIB and PINCTRL config under SOC_RENESAS

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "This contains the ususal arm and arm64 updates to defconfig files,
  enabling newly added drivers and adapting the files to Kconfig
  changes, in particular for qualcomm, microchip, and nxp SoC platforms"

* tag 'soc-defconfig-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  arm64: defconfig: Enable Qualcomm SM6115 / SM4250 GCC and Pinctrl
  arm64: defconfig: Enable Qualcomm SM6115 / SM4250 GCC and Pinctrl
  ARM: configs: multi_v7: switch to new MICROCHIP_ISC driver
  ARM: configs: sama5/7: switch to new MICROCHIP_ISC driver
  ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
  arm64: defconfig: Enable Renesas R-Car S4-8 Spider Ethernet devices
  arm: configs: spear6xx: Enable PL110 display controller
  arm: configs: spear6xx: Refresh defconfig
  arm64: defconfig: Enable HTE config
  arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper
  arm64: defconfig: Add Renesas 9-series PCIe clock generator
  riscv: configs: defconfig: Enable Renesas RZ/Five SoC
  ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
  arm64: defconfig: Enable Tegra186 timer support
  arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
  arm64: defconfig: Enable Qualcomm QCE crypto
  arm64: defconfig: Enable TI_TFP410 DVI bridge
  ARM: configs: at91: sama7: add config for thermal management
  ARM: configs: at91: sama7: add config for microchip otpc
  ARM: configs: at91: sama7: use make savedefconfig
  ...

Pull arm64 updates from Will Deacon:
 "The highlights this time are support for dynamically enabling and
  disabling Clang's Shadow Call Stack at boot and a long-awaited
  optimisation to the way in which we handle the SVE register state on
  system call entry to avoid taking unnecessary traps from userspace.

  Summary:

  ACPI:
   - Enable FPDT support for boot-time profiling
   - Fix CPU PMU probing to work better with PREEMPT_RT
   - Update SMMUv3 MSI DeviceID parsing to latest IORT spec
   - APMT support for probing Arm CoreSight PMU devices

  CPU features:
   - Advertise new SVE instructions (v2.1)
   - Advertise range prefetch instruction
   - Advertise CSSC ("Common Short Sequence Compression") scalar
     instructions, adding things like min, max, abs, popcount
   - Enable DIT (Data Independent Timing) when running in the kernel
   - More conversion of system register fields over to the generated
     header

  CPU misfeatures:
   - Workaround for Cortex-A715 erratum #2645198

  Dynamic SCS:
   - Support for dynamic shadow call stacks to allow switching at
     runtime between Clang's SCS implementation and the CPU's pointer
     authentication feature when it is supported (complete with scary
     DWARF parser!)

  Tracing and debug:
   - Remove static ftrace in favour of, err, dynamic ftrace!
   - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
     and existing arch code
   - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
     old FTRACE_WITH_REGS
   - Extend 'crashkernel=' parameter with default value and fallback to
     placement above 4G physical if initial (low) allocation fails

  SVE:
   - Optimisation to avoid disabling SVE unconditionally on syscall
     entry and just zeroing the non-shared state on return instead

  Exceptions:
   - Rework of undefined instruction handling to avoid serialisation on
     global lock (this includes emulation of user accesses to the ID
     registers)

  Perf and PMU:
   - Support for TLP filters in Hisilicon's PCIe PMU device
   - Support for the DDR PMU present in Amlogic Meson G12 SoCs
   - Support for the terribly-named "CoreSight PMU" architecture from
     Arm (and Nvidia's implementation of said architecture)

  Misc:
   - Tighten up our boot protocol for systems with memory above 52 bits
     physical
   - Const-ify static keys to satisty jump label asm constraints
   - Trivial FFA driver cleanups in preparation for v1.1 support
   - Export the kernel_neon_* APIs as GPL symbols
   - Harden our instruction generation routines against instrumentation
   - A bunch of robustness improvements to our arch-specific selftests
   - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
  arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
  arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
  arm64: Prohibit instrumentation on arch_stack_walk()
  arm64:uprobe fix the uprobe SWBP_INSN in big-endian
  arm64: alternatives: add __init/__initconst to some functions/variables
  arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
  kselftest/arm64: Allow epoll_wait() to return more than one result
  kselftest/arm64: Don't drain output while spawning children
  kselftest/arm64: Hold fp-stress children until they're all spawned
  arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
  arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
  arm64/sysreg: Convert MVFR2_EL1 to automatic generation
  arm64/sysreg: Convert MVFR1_EL1 to automatic generation
  arm64/sysreg: Convert MVFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
  ...

Pull microblaze updates from Michal Simek:
 "Clean up PCI support which was pretty much copied and pasted from
  PowerPC long time ago for one custom platform which is not available
  for years.

  Also, the Xilinx/AMD PCIe team tested Microblaze with IP cores also
  used on ARM SOCs and clean up Microblaze code"

* tag 'microblaze-v6.2' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Moving PCI iounmap and dependent code
  microblaze/PCI: Remove support for Xilinx PCI host bridge
  microblaze/PCI: Remove unused pci_iobar_pfn() and et al declarations
  microblaze/PCI: Remove unused sys_pciconfig_iobase() and et al declaration
  microblaze/PCI: Remove unused pci_address_to_pio() conversion of CPU address to I/O port
  microblaze/PCI: Remove unused PCI Indirect ops
  microblaze/PCI: Remove unused PCI BIOS resource allocation
  microblaze/PCI: Remove unused allocation & free of PCI host bridge structure
  microblaze/PCI: Remove unused device tree parsing for a host bridge resources
  microblaze/PCI: Remove unused PCI legacy IO's access on a bus
  microblaze/PCI: Remove unused PCI bus scan if configured as a host
  microblaze/PCI: Remove Null PCI config access unused functions
  microblaze/PCI: Remove unused early_read_config_byte() et al declarations

Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
   Kohli)

 - Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)

 - Allow IRQ remapping to work without x2apic (Nuno Das Neves)

 - Fix comments (Olaf Hering)

 - Expand hv_vp_assist_page definition (Saurabh Sengar)

 - Improvement to page reporting (Shradha Gupta)

 - Make sure TSC clocksource works when Linux runs as the root partition
   (Stanislav Kinsburskiy)

* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
  iommu/hyper-v: Allow hyperv irq remapping without x2apic
  clocksource: hyper-v: Add TSC page support for root partition
  clocksource: hyper-v: Use TSC PFN getter to map vvar page
  clocksource: hyper-v: Introduce TSC PFN getter
  clocksource: hyper-v: Introduce a pointer to TSC page
  x86/hyperv: Expand definition of struct hv_vp_assist_page
  PCI: hv: update comment in x86 specific hv_arch_irq_unmask
  hv: fix comment typo in vmbus_channel/low_latency
  drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  video: hyperv_fb: Avoid taking busy spinlock on panic path
  hv_balloon: Add support for configurable order free page reporting
  mm/page_reporting: Add checks for page_reporting_order param

Pull tpm updates from Jarkko Sakkinen:
 "A random collection of TPM fixes and one bug fix for trusted keys"

* tag 'tpmdd-next-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: st33zp24: remove pointless checks on probe
  tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
  tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
  tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
  tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
  tpm: acpi: Call acpi_put_table() to fix memory leak
  tpm: Add flag to use default cancellation policy
  tpm: tis_i2c: Fix sanity check interrupt enable mask
  KEYS: trusted: tee: Make registered shm dependency explicit
  tpm: Avoid function type cast of put_device()
  tpm: st33zp24: switch to using gpiod API
  tpm: st33zp24: drop support for platform data

Pull slab updates from Vlastimil Babka:

 - SLOB deprecation and SLUB_TINY

   The SLOB allocator adds maintenance burden and stands in the way of
   API improvements [1]. Deprecate it by renaming the config option (to
   make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
   SLUB should be used instead as SLAB will be the next on the removal
   list.

   Based on reports from a riscv k210 board with 8MB RAM, add a
   CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
   expense of scalability. This has resolved the k210 regression [2] so
   in case there are no others (that wouldn't be resolvable by further
   tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.

   Existing defconfigs with CONFIG_SLOB are converted to
   CONFIG_SLUB_TINY.

 - kmalloc() slub_debug redzone improvements

   A series from Feng Tang that builds on the tracking or requested size
   for kmalloc() allocations (for caches with debugging enabled) added
   in 6.1, to make redzone checks consider the requested size and not
   the rounded up one, in order to catch more subtle buffer overruns.
   Includes new slub_kunit test.

 - struct slab fields reordering to accomodate larger rcu_head

   RCU folks would like to grow rcu_head with debugging options, which
   breaks current struct slab layout's assumptions, so reorganize it to
   make this possible.

 - Miscellaneous improvements/fixes:
     - __alloc_size checking compiler workaround (Kees Cook)
     - Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
     - Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
     - Correct SLUB's percpu allocation estimates (Baoquan He)
     - Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
     - Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
     - Dead code removal in SLUB (Hyeonggon Yoo)

* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
  mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
  mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
  mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
  mm, slub: split out allocations from pre/post hooks
  mm/slub, kunit: Add a test case for kmalloc redzone check
  mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
  mm, slub: refactor free debug processing
  mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
  mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
  mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
  mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
  mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
  mm, slub: add CONFIG_SLUB_TINY
  mm, slab: ignore hardened usercopy parameters when disabled
  slab: Remove special-casing of const 0 size allocations
  slab: Clean up SLOB vs kmalloc() definition
  mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
  mm/migrate: make isolate_movable_page() skip slab pages
  mm/slab: move and adjust kernel-doc for kmem_cache_alloc
  mm/slub, percpu: correct the calculation of early percpu allocation size
  ...

Pull printk updates from Petr Mladek:

 - Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
   this_cpu_inc() on strong load-store architectures.

 - Introduce new console_list_lock to synchronize a manipulation of the
   list of registered consoles and their flags.

   This is a first step in removing the big-kernel-lock-like behavior of
   console_lock(). This semaphore still serializes console->write()
   calbacks against:

      - each other. It primary prevents potential races between early
        and proper console drivers using the same device.

      - suspend()/resume() callbacks and init() operations in some
        drivers.

      - various other operations in the tty/vt and framebufer
        susbsystems. It is likely that console_lock() serializes even
        operations that are not directly conflicting with the
        console->write() callbacks here. This is the most complicated
        big-kernel-lock aspect of the console_lock() that will be hard
        to untangle.

 - Introduce new console_srcu lock that is used to safely iterate and
   access the registered console drivers under SRCU read lock.

   This is a prerequisite for introducing atomic console drivers and
   console kthreads. It will reduce the complexity of serialization
   against normal consoles and console_lock(). Also it should remove the
   risk of deadlock during critical situations, like Oops or panic, when
   only atomic consoles are registered.

 - Check whether the console is registered instead of enabled on many
   locations. It was a historical leftover.

 - Cleanly force a preferred console in xenfb code instead of a dirty
   hack.

 - A lot of code and comment clean ups and improvements.

* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
  printk: htmldocs: add missing description
  tty: serial: sh-sci: use setup() callback for early console
  printk: relieve console_lock of list synchronization duties
  tty: serial: kgdboc: use console_list_lock to trap exit
  tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
  tty: serial: kgdboc: use console_list_lock for list traversal
  tty: serial: kgdboc: use srcu console list iterator
  proc: consoles: use console_list_lock for list iteration
  tty: tty_io: use console_list_lock for list synchronization
  printk, xen: fbfront: create/use safe function for forcing preferred
  netconsole: avoid CON_ENABLED misuse to track registration
  usb: early: xhci-dbc: use console_is_registered()
  tty: serial: xilinx_uartps: use console_is_registered()
  tty: serial: samsung_tty: use console_is_registered()
  tty: serial: pic32_uart: use console_is_registered()
  tty: serial: earlycon: use console_is_registered()
  tty: hvc: use console_is_registered()
  efi: earlycon: use console_is_registered()
  tty: nfcon: use console_is_registered()
  serial_core: replace uart_console_enabled() with uart_console_registered()
  ...

Pull file locking updates from Jeff Layton:
 "The main change here is to add the new locks_inode_context helper, and
  convert all of the places that dereference inode->i_flctx directly to
  use that instead.

  There is a new helper to indicate whether any locks are held on an
  inode. This is mostly for Ceph but may be usable elsewhere too.

  Andi Kleen requested that we print the PID when the LOCK_MAND warning
  fires, to help track down applications trying to use it.

  Finally, we added some new warnings to some of the file locking
  functions that fire when the ->fl_file and filp arguments differ. This
  helped us find some long-standing bugs in lockd. Patches for those are
  in Chuck Lever's tree and should be in his v6.2 PR. After that patch,
  people using NFSv2/v3 locking may see some warnings fire until those
  go in.

  Happy Holidays!"

* tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  Add process name and pid to locks warning
  nfsd: use locks_inode_context helper
  nfs: use locks_inode_context helper
  lockd: use locks_inode_context helper
  ksmbd: use locks_inode_context helper
  cifs: use locks_inode_context helper
  ceph: use locks_inode_context helper
  filelock: add a new locks_inode_context accessor function
  filelock: new helper: vfs_inode_has_locks
  filelock: WARN_ON_ONCE when ->fl_file and filp don't match

Pull execve updates from Kees Cook:
 "Most are small refactorings and bug fixes, but three things stand out:
  switching timens (which got reverted before) looks solid now,
  FOLL_FORCE has been removed (no failures seen yet across several weeks
  in -next), and some whitespace cleanups (which are long overdue).

   - Add timens support (when switching mm). This version has survived
     in -next for the entire cycle (Andrei Vagin)

   - Various small bug fixes, refactoring, and readability improvements
     (Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)

   - Remove FOLL_FORCE for stack setup (Kees Cook)

   - Whitespace cleanups (Rolf Eike Beer, Kees Cook)"

* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  binfmt_misc: fix shift-out-of-bounds in check_special_flags
  binfmt: Fix error return code in load_elf_fdpic_binary()
  exec: Remove FOLL_FORCE for stack setup
  binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
  binfmt_elf: simplify error handling in load_elf_phdrs()
  binfmt_elf: fix documented return value for load_elf_phdrs()
  exec: simplify initial stack size expansion
  binfmt: Fix whitespace issues
  exec: Add comments on check_unsafe_exec() fs counting
  ELF uapi: add spaces before '{'
  selftests/timens: add a test for vfork+exit
  fs/exec: switch timens when a task gets a new mm

Pull seccomp updates from Kees Cook:

 - Add missing kerndoc parameter (Randy Dunlap)

 - Improve seccomp selftest to check CAP_SYS_ADMIN (Gautam Menghani)

 - Fix allocation leak when cloned thread immediately dies (Kuniyuki
   Iwashima)

* tag 'seccomp-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: document the "filter_count" field
  seccomp: Move copy_seccomp() to no failure path.
  selftests/seccomp: Check CAP_SYS_ADMIN capability in the test mode_filter_without_nnp

Pull pstore updates from Kees Cook:
 "A small collection of bug fixes, refactorings, and general
  improvements:

   - Reporting improvements and return path fixes (Guilherme G. Piccoli,
     Wang Yufen, Kees Cook)

   - Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli)

   - Add Guilherme to pstore MAINTAINERS entry

   - Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd)"

* tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
  pstore/ram: Fix error return code in ramoops_probe()
  pstore: Alert on backend write error
  MAINTAINERS: Update pstore maintainers
  pstore/ram: Set freed addresses to NULL
  pstore/ram: Move internal definitions out of kernel-wide include
  pstore/ram: Move pmsg init earlier
  pstore/ram: Consolidate kfree() paths
  efi: pstore: Follow convention for the efi-pstore backend name
  pstore: Inform unregistered backend names as well
  pstore: Expose kmsg_bytes as a module parameter
  pstore: Improve error reporting in case of backend overlap
  pstore/zone: Use GFP_ATOMIC to allocate zone buffer

Merge tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux

Pull unsigned-char conversion from Jason Donenfeld:
 "Enable -funsigned-char and fix code affected by that flag.

  During the 6.1 cycle, several patches already made it into the tree,
  which were for code that was already broken on at least one
  architecture, where the naked char had a different sign than the code
  author anticipated, or were part of some bug fix for an existing bug
  that this initiative unearthed.

  These 6.1-era fixes are:

    64806090 ("MIPS: pic32: treat port as signed integer")
    5c26159c ("ipvs: use explicitly signed chars")
    e6cb8769 ("wifi: airo: do not assign -1 to unsigned char")
    937ec9f7 ("staging: rtl8192e: remove bogus ssid character sign test")
    67704738 ("misc: sgi-gru: use explicitly signed char")
    50895a55 ("ALSA: rme9652: use explicitly signed char")
    ee03c0f2 ("ALSA: au88x0: use explicitly signed char")
    835bed1b ("fbdev: sisfb: use explicitly signed char")
    50f19697 ("parisc: Use signed char for hardware path in pdc.h")
    66063033 ("wifi: rt2x00: use explicitly signed or unsigned types")

  Regarding patches in this pull:

   - There is one patch in this pull that should have made it to you
     during 6.1 ("media: stv0288: use explicitly signed char"), but the
     maintainer was MIA during the cycle, so it's in here instead.

   - Two patches fix single architecture code affected by unsigned char
     ("perf/x86: Make struct p4_event_bind::cntr signed array" and
     "sparc: sbus: treat CPU index as integer"), while one patch fixes
     an unused typedef, in case it's ever used in the future ("media:
     atomisp: make hive_int8 explictly signed").

   - Finally, there's the change to actually enable -funsigned-char
     ("kbuild: treat char as always unsigned") and then the removal of
     some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib:
     assume char is unsigned").

  The various fixes were found with a combination of diffing objdump
  output, a large variety of Coccinelle scripts, and plain old grep. In
  the end, things didn't seem as bad as I feared they would. But of
  course, it's also possible I missed things.

  However, this has been in linux-next for basically an entire cycle
  now, so I'm not overly worried. I've also been daily driving this on
  my laptop for all of 6.1. Still, this series, and the ones sent for
  6.1 don't total in quantity to what I thought it'd be, so I will be on
  the lookout for breakage.

  We could receive a few reports that are quickly fixable. Hopefully we
  won't receive a barrage of reports that would result in a revert. And
  just maybe we won't receive any reports at all and nobody will even
  notice. Knock on wood"

* tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux:
  lib: assume char is unsigned
  kbuild: treat char as always unsigned
  media: atomisp: make hive_int8 explictly signed
  media: stv0288: use explicitly signed char
  sparc: sbus: treat CPU index as integer
  perf/x86: Make struct p4_event_bind::cntr signed array

Pull nolibc updates from Paul McKenney:

 - Further improvements to nolibc testing

* tag 'nolibc.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  selftests/nolibc: Always rebuild the sysroot when running a test
  selftests/nolibc: Add 7 tests for memcmp()

Pull KCSAN updates from Paul McKenney:

 - Add instrumentation for memcpy(), memset(), and memmove() for Clang
   v16+'s new function names that are used when the -fsanitize=thread
   argument is given

 - Fix objtool warnings from KCSAN's volatile instrumentation, and typos
   in a pair of Kconfig options' help clauses

* tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Fix trivial typo in Kconfig help comments
  objtool, kcsan: Add volatile read/write instrumentation to whitelist
  kcsan: Instrument memcpy/memset/memmove with newer Clang

Pull kernel memory model documentation updates from Paul McKenney:

 - Update the LKMM documentation, both in English and in Korean

* tag 'lkmm.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  docs/memory-barriers.txt/kokr: Fix confusing name of 'data dependency barrier'
  docs/memory-barriers.txt/kokr: Add memory barrier dma_mb()
  docs/memory-barriers.txt/kokr: introduce io_stop_wc() and add implementation for ARM64
  docs/memory-barriers.txt: Add a missed closing parenthesis
  tools/memory-model: Weaken ctrl dependency definition in explanation.txt

Pull RCU updates from Paul McKenney:

 - Documentation updates. This is the second in a series from an ongoing
   review of the RCU documentation.

 - Miscellaneous fixes.

 - Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
   that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
   CPU lists, causes call_rcu() to introduce delays.

   These delays result in significant power savings on nearly idle
   Android and ChromeOS systems. These savings range from a few percent
   to more than ten percent.

   This series also includes several commits that change call_rcu() to a
   new call_rcu_hurry() function that avoids these delays in a few
   cases, for example, where timely wakeups are required. Several of
   these are outside of RCU and thus have acks and reviews from the
   relevant maintainers.

 - Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
   for architectures that support NMIs, but which do not provide
   NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
   by the upcoming lockless printk() work by John Ogness et al.

 - Changes providing minor but important increases in torture test
   coverage for the new RCU polled-grace-period APIs.

 - Changes to torturescript that avoid redundant kernel builds, thus
   providing about a 30% speedup for the torture.sh acceptance test.

* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
  net: devinet: Reduce refcount before grace period
  net: Use call_rcu_hurry() for dst_release()
  workqueue: Make queue_rcu_work() use call_rcu_hurry()
  percpu-refcount: Use call_rcu_hurry() for atomic switch
  scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
  rcu/rcutorture: Use call_rcu_hurry() where needed
  rcu/rcuscale: Use call_rcu_hurry() for async reader test
  rcu/sync: Use call_rcu_hurry() instead of call_rcu
  rcuscale: Add laziness and kfree tests
  rcu: Shrinker for lazy rcu
  rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
  rcu: Make call_rcu() lazy to save power
  rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
  srcu: Debug NMI safety even on archs that don't require it
  srcu: Explain the reason behind the read side critical section on GP start
  srcu: Warn when NMI-unsafe API is used in NMI
  arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
  arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
  rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
  rcu-tasks: Make grace-period-age message human-readable
  ...

Merge devfreq updates and cpupower utility updates for 6.2-rc1:

 - Add a private governor_data for devfreq governors (Kant Fan).

 - Reorganize devfreq code to use device_match_of_node() and
   devm_platform_get_and_ioremap_resource() instead of open coding
   them (ye xingchen, Minghao Chi).

 - Make cpupower choose base_cpu to display default cpupower details
   instead of picking CPU 0 (Saket Kumar Bhaskar).

 - Add Georgian translation to cpupower documentation (Zurab
   Kargareteli).

 - Introduce powercap intel-rapl library, powercap-info command, and
   RAPL monitor into cpupower (Thomas Renninger).

* pm-devfreq:
  PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
  PM / devfreq: event: Use device_match_of_node()
  PM / devfreq: Use device_match_of_node()
  PM/devfreq: governor: Add a private governor_data for governor

* pm-tools:
  cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
  cpupower: Introduce powercap intel-rapl library and powercap-info command
  cpupower: Add Georgian translation
  tools/cpupower: Choose base_cpu to display default cpupower details

Merge power capping code updates, x86-specific power management pdate,
operating performance points library updates and miscellaneous power
management updates for 6.2-rc1:

 - Fix compiler warnings with make W=1 in the idle_inject power capping
   driver (Srinivas Pandruvada).

 - Use kstrtobool() instead of strtobool() in the power capping sysfs
   interface (Christophe JAILLET).

 - Add SCMI Powercap based power capping driver (Cristian Marussi).

 - Add Emerald Rapids support to the intel-uncore-freq driver (Artem
   Bityutskiy).

 - Repair slips in kernel-doc comments in the generic notifier code
   (Lukas Bulwahn).

 - Fix several DT issues in the OPP library reorganize code around
   opp-microvolt-<named> DT property (Viresh Kumar).

 - Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
   to be present without the others present (James Calligeros).

 - Fix clock-latency-ns property in DT example (Serge Semin).

* powercap:
  powercap: idle_inject: Fix warnings with make W=1
  powercap: Use kstrtobool() instead of strtobool()
  powercap: arm_scmi: Add SCMI Powercap based driver

* pm-x86:
  platform/x86: intel-uncore-freq: add Emerald Rapids support

* pm-opp:
  dt-bindings: opp-v2: Fix clock-latency-ns prop in example
  OPP: decouple dt properties in opp_parse_supplies()
  OPP: Simplify opp_parse_supplies() by restructuring it
  OPP: Parse named opp-microwatt property too
  dt-bindings: opp: Fix named microwatt property
  dt-bindings: opp: Fix usage of current in microwatt property

* pm-misc:
  notifier: repair slips in kernel-doc comments

Merge cpuidle changes, updates related to system sleep amd generic power
domains code fixes for 6.2-rc1:

 - Improve kernel messages printed by the cpuidle PCI driver (Ulf
   Hansson).

 - Make the DT cpuidle driver return the correct number of parsed idle
   states, clean it up and clarify a comment in it (Ulf Hansson).

 - Modify the tasks freezing code to avoid using pr_cont() and refine an
   error message printed by it (Rafael Wysocki).

 - Make the hibernation core code complain about memory map mismatches
   during resume to help diagnostics (Xueqin Luo).

 - Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).

 - Reverse the order of performance and enabling operations in the
   generic power domains code (Abel Vesa).

 - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
   generic power domains code (Abel Vesa).

 - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
   Guo).

 - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).

 - Drop generic power domain status manipulation during hibernate
   restore (Shawn Guo).

* pm-cpuidle:
  cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver()
  cpuidle: dt: Return the correct numbers of parsed idle states
  cpuidle: psci: Extend information in log about OSI/PC mode

* pm-sleep:
  PM: sleep: Refine error message in try_to_freeze_tasks()
  PM: sleep: Avoid using pr_cont() in the tasks freezing code
  PM: hibernate: Complain about memory map mismatches during resume
  PM: hibernate: Fix mistake in kerneldoc comment

* pm-domains:
  PM: domains: Reverse the order of performance and enabling ops
  PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
  PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq()
  PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend()
  PM: domains: Drop genpd status manipulation for hibernate restore

Merge cpufreq changes for 6.2-rc1:

 - Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
   Martin).

 - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).

 - Update Qualcomm cpufreq driver, including:
   * CPU clock provider support,
   * Generic cleanups or reorganization.
   * Potential memleak fix.
   * Fix of the return value of cpufreq_driver->get().
   (Manivannan Sadhasivam, Chen Hui).

 - Update Qualcomm cpufreq driver's DT bindings, including:
   * Support for CPU clock provider.
   * Missing cache-related properties fixes.
   * Support for QDU1000/QRU1000.
   (Manivannan Sadhasivam, Rob Herring, Melody Olvera).

 - Add support for ti,am625 SoC and enable build of ti-cpufreq for
   ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).

 - Use flexible array to simplify memory allocation in the tegra186
   cpufreq driver (Christophe JAILLET).

 - Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).

 - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
   Gherdovich).

 - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
   (Xiongfeng Wang).

 - Initialize the kobj_unregister completion before calling
   kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).

 - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
   Nathan Chancellor).

 - Make intel_pstate accept initial EPP value of 0x80 (Srinivas
   Pandruvada).

 - Make read-only array sys_clk_src in the SPEAr cpufreq driver static
   (Colin Ian King).

 - Make array speeds in the longhaul cpufreq driver static (Colin Ian
   King).

 - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
   Shevchenko).

 - Drop a reference to CVS from cpufreq documentation (Conghui Wang).

* pm-cpufreq: (30 commits)
  cpufreq: Remove CVS version control contents from documentation
  cpufreq: stats: Convert to use sysfs_emit_at() API
  cpufreq: ACPI: Only set boost MSRs on supported CPUs
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
  cpufreq: tegra186: Use flexible array to simplify memory allocation
  cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
  cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
  cpufreq: Init completion before kobject_init_and_add()
  cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
  cpufreq: qcom-hw: Add CPU clock provider support
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
  cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
  cpufreq: ACPI: Remove unused variables 'acpi_cpufreq_online' and 'ret'
  cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
  arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
  cpufreq: ti: Enable ti-cpufreq for ARCH_K3
  arm64: dts: ti: k3-am625: Introduce operating-points table
  cpufreq: dt-platdev: Blacklist ti,am625 SoC
  cpufreq: ti-cpufreq: Add support for AM625
  dt-bindings: cpufreq: qcom: Add missing cache related properties
  ...

Had a duplicate event typo, so just fixed the 1 character typo.

Fixes: 1a218d31 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: James Hurley <jahurley@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/aadacdbbd3186c55e74ea9456fe011b77938eb6c.1670535330.git.jahurley@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>