- 23 Sep, 2019 5 commits
-
-
Adam Ford authored
The TFP410 driver was removed but the replacement driver was never enabled. This patch enableds the DRM_TI_TFP410 Fixes: be3143d8 ("drm/omap: Remove TFP410 and DVI connector drivers") Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
-
H. Nikolaus Schaller authored
commit 6953c57a "gpio: of: Handle SPI chipselect legacy bindings" did introduce logic to centrally handle the legacy spi-cs-high property in combination with cs-gpios. This assumes that the polarity of the CS has to be inverted if spi-cs-high is missing, even and especially if non-legacy GPIO_ACTIVE_HIGH is specified. The DTS for the GTA04 was orginally introduced under the assumption that there is no need for spi-cs-high if the gpio is defined with proper polarity GPIO_ACTIVE_HIGH. This was not a problem until gpiolib changed the interpretation of GPIO_ACTIVE_HIGH and missing spi-cs-high. The effect is that the missing spi-cs-high is now interpreted as CS being low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the panel is to be programmed by the panel driver. Therefore, we have to add the redundant and legacy spi-cs-high property to properly activate CS. Cc: stable@vger.kernel.org Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7. This causes the following warning on beagle-x15: ti-sysc 48468000.target-module: could not add child clock ahclkr: -19 Also the mcasp clkctrl clock bits are wrong: For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0: bit 28 is ahclkr bit 24 is ahclkx bit 22 is auxclk bit 0 is fck For mcasp3 to 8 we have three clocks at bits 24, 22 and 0. bit 24 is ahclkx bit 22 is auxclk bit 0 is fck We do not have currently mapped auxclk at bit 22 for the drivers, that can be added if needed. Fixes: 5241ccbf ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports") Cc: Suman Anna <s-anna@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong way around. Fixes: dffa9051 ("clk: ti: dra7: add new clkctrl data") Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Suman Anna <s-anna@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- 15 Sep, 2019 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit b03755ad. This is sad, and done for all the wrong reasons. Because that commit is good, and does exactly what it says: avoids a lot of small disk requests for the inode table read-ahead. However, it turns out that it causes an entirely unrelated problem: the getrandom() system call was introduced back in 2014 by commit c6e9d6f3 ("random: introduce getrandom(2) system call"), and people use it as a convenient source of good random numbers. But part of the current semantics for getrandom() is that it waits for the entropy pool to fill at least partially (unlike /dev/urandom). And at least ArchLinux apparently has a systemd that uses getrandom() at boot time, and the improvements in IO patterns means that existing installations suddenly start hanging, waiting for entropy that will never happen. It seems to be an unlucky combination of not _quite_ enough entropy, together with a particular systemd version and configuration. Lennart says that the systemd-random-seed process (which is what does this early access) is supposed to not block any other boot activity, but sadly that doesn't actually seem to be the case (possibly due bogus dependencies on cryptsetup for encrypted swapspace). The correct fix is to fix getrandom() to not block when it's not appropriate, but that fix is going to take a lot more discussion. Do we just make it act like /dev/urandom by default, and add a new flag for "wait for entropy"? Do we add a boot-time option? Or do we just limit the amount of time it will wait for entropy? So in the meantime, we do the revert to give us time to discuss the eventual fix for the fundamental problem, at which point we can re-apply the ext4 inode table access optimization. Reported-by:
Ahmed S. Darwish <darwish.07@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Sep, 2019 12 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "The main change here is a revert of reverts. We recently simplified some code that was thought unnecessary; however, since then KVM has grown quite a few cond_resched()s and for that reason the simplified code is prone to livelocks---one CPUs tries to empty a list of guest page tables while the others keep adding to them. This adds back the generation-based zapping of guest page tables, which was not unnecessary after all. On top of this, there is a fix for a kernel memory leak and a couple of s390 fixlets as well" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot KVM: x86: work around leak of uninitialized stack contents KVM: nVMX: handle page fault in vmread KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "A last minute revert The 32-bit build got broken by the latest defence in depth patch. Revert and we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: Revert "vhost: block speculation of translated descriptors"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Paul Walmsley: "Last week, Palmer and I learned that there was an error in the RISC-V kernel image header format that could make it less compatible with the ARM64 kernel image header format. I had missed this error during my original reviews of the patch. The kernel image header format is an interface that impacts bootloaders, QEMU, and other user tools. Those packages must be updated to align with whatever is merged in the kernel. We would like to avoid proliferating these image formats by keeping the RISC-V header as close as possible to the existing ARM64 header. Since the arch/riscv patch that adds support for the image header was merged with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add an Image header that boot loader can parse."), we think it wise to try to fix this error before v5.3 is released. The fix itself should be backwards-compatible with any project that has already merged support for premature versions of this interface. It primarily involves ensuring that the RISC-V image header has something useful in the same field as the ARM64 image header" * tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: modify the Image header to improve compatibility with the ARM64 header
-
Michael S. Tsirkin authored
This reverts commit a89db445. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - tmio: Fixup runtime PM management during probe and remove - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC - bcm2835: Prevent lockups when terminating work * tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fixup runtime PM management during remove mmc: tmio: Fixup runtime PM management during probe Revert "mmc: tmio: move runtime PM enablement to the driver implementations" Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" Revert "mmc: bcm2835: Terminate timeout work synchronously"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "From the maintainer summit, just some last minute fixes for final: lima: - fix gem_wait ioctl core: - constify modes list i915: - DP MST high color depth regression - GPU hangs on vulkan compute workloads" * tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm: drm/lima: fix lima_gem_wait() return value drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+ drm/i915: Limit MST to <= 8bpc once again drm/modes: Make the whitelist more const
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fixes for 5.3 - prevent a user triggerable oops in the migration code - do not leak kernel stack content
-
Sean Christopherson authored
James Harvey reported a livelock that was introduced by commit d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06a) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aac ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by:
James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Fuqian Huang authored
Emulation of VMPTRST can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Cc: stable@vger.kernel.org [add comment] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The implementation of vmread to memory is still incomplete, as it lacks the ability to do vmread to I/O memory just like vmptrst. Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paul Walmsley authored
Part of the intention during the definition of the RISC-V kernel image header was to lay the groundwork for a future merge with the ARM64 image header. One error during my original review was not noticing that the RISC-V header's "magic" field was at a different size and position than the ARM64's "magic" field. If the existing ARM64 Image header parsing code were to attempt to parse an existing RISC-V kernel image header format, it would see a magic number 0. This is undesirable, since it's our intention to align as closely as possible with the ARM64 header format. Another problem was that the original "res3" field was not being initialized correctly to zero. Address these issues by creating a 32-bit "magic2" field in the RISC-V header which matches the ARM64 "magic" field. RISC-V binaries will store "RSC\x05" in this field. The intention is that the use of the existing 64-bit "magic" field in the RISC-V header will be deprecated over time. Increment the minor version number of the file format to indicate this change, and update the documentation accordingly. Fix the assembler directives in head.S to ensure that reserved fields are properly zero-initialized. Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Reported-by:
Palmer Dabbelt <palmer@sifive.com> Reviewed-by:
Palmer Dabbelt <palmer@sifive.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Karsten Merker <merker@debian.org> Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
-
- 13 Sep, 2019 11 commits
-
-
Bjørn Mork authored
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mao Wenan says: ==================== fix memory leak for sctp_do_bind First two patches are to do cleanup, remove redundant assignment, and change return type of sctp_get_port_local. Third patch is to fix memory leak for sctp_do_bind if failed to bind address. v2: add one patch to change return type of sctp_get_port_local. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
There is one memory leak bug report: BUG: memory leak unreferenced object 0xffff8881dc4c5ec0 (size 40): comm "syz-executor.0", pid 5673, jiffies 4298198457 (age 27.578s) hex dump (first 32 bytes): 02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00 ................ f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00 .c=............. backtrace: [<0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp] [<00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp] [<000000005be274a2>] sctp_bind+0x5a/0x80 [sctp] [<00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6] [<00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647 [<000000004513635b>] __do_sys_bind net/socket.c:1658 [inline] [<000000004513635b>] __se_sys_bind net/socket.c:1656 [inline] [<000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656 [<0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 [<0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe This is because in sctp_do_bind, if sctp_get_port_local is to create hash bucket successfully, and sctp_add_bind_addr failed to bind address, e.g return -ENOMEM, so memory leak found, it needs to destroy allocated bucket. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
There are more parentheses in if clause when call sctp_get_port_local in sctp_do_bind, and redundant assignment to 'ret'. This patch is to do cleanup. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
Currently sctp_get_port_local() returns a long which is either 0,1 or a pointer casted to long. It's neither of the callers use the return value since commit 62208f12 ("net: sctp: simplify sctp_get_port"). Now two callers are sctp_get_port and sctp_do_bind, they actually assumend a casted to an int was the same as a pointer casted to a long, and they don't save the return value just check whether it is zero or non-zero, so it would better change return type from long to int for sctp_get_port_local. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeff Kirsher authored
Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson <snelson@pensando.io> Fixes: 7f68d430 ("ixgbevf: enable VF IPsec offload operations") Reported-by:
Jonathan Tooker <jonathan@reliablehosting.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ulf Hansson authored
Accessing the device when it may be runtime suspended is a bug, which is the case in tmio_mmc_host_remove(). Let's fix the behaviour. Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
Ulf Hansson authored
The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
Ulf Hansson authored
This reverts commit 7ff21319. It turns out that the above commit introduces other problems. For example, calling pm_runtime_set_active() must not be done prior calling pm_runtime_enable() as that makes it fail. This leads to additional problems, such as clock enables being wrongly balanced. Rather than fixing the problem on top, let's start over by doing a revert. Fixes: 7ff21319 ("mmc: tmio: move runtime PM enablement to the driver implementations") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "Roman found and fixed a bug in the cgroup2 freezer which allows new child cgroup to escape frozen state" * 'for-5.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: freezer: fix frozen state inheritance kselftests: cgroup: add freezer mkdir test
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Here are two fixes, one of them urgent fixing a bug introduced in 5.2 and reported by many users. It took time to identify the root cause, catching the 5.3 release is higly desired also to push the fix to 5.2 stable tree. The bug is a mess up of return values after adding proper error handling and honestly the kind of bug that can cause sleeping disorders until it's caught. My appologies to everybody who was affected. Summary of what could happen: 1) either a hang when committing a transaction, if this happens there's no risk of corruption, still the hang is very inconvenient and can't be resolved without a reboot 2) writeback for some btree nodes may never be started and we end up committing a transaction without noticing that, this is really serious and that will lead to the "parent transid verify failed" messages" * tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix unwritten extent buffers and hangs on future writeback attempts Btrfs: fix assertion failure during fsync and use of stale transaction
-
- 12 Sep, 2019 10 commits
-
-
Roman Gushchin authored
If a new child cgroup is created in the frozen cgroup hierarchy (one or more of ancestor cgroups is frozen), the CGRP_FREEZE cgroup flag should be set. Otherwise if a process will be attached to the child cgroup, it won't become frozen. The problem can be reproduced with the test_cgfreezer_mkdir test. This is the output before this patch: ~/test_freezer ok 1 test_cgfreezer_simple ok 2 test_cgfreezer_tree ok 3 test_cgfreezer_forkbomb Cgroup /sys/fs/cgroup/cg_test_mkdir_A/cg_test_mkdir_B isn't frozen not ok 4 test_cgfreezer_mkdir ok 5 test_cgfreezer_rmdir ok 6 test_cgfreezer_migrate ok 7 test_cgfreezer_ptrace ok 8 test_cgfreezer_stopped ok 9 test_cgfreezer_ptraced ok 10 test_cgfreezer_vfork And with this patch: ~/test_freezer ok 1 test_cgfreezer_simple ok 2 test_cgfreezer_tree ok 3 test_cgfreezer_forkbomb ok 4 test_cgfreezer_mkdir ok 5 test_cgfreezer_rmdir ok 6 test_cgfreezer_migrate ok 7 test_cgfreezer_ptrace ok 8 test_cgfreezer_stopped ok 9 test_cgfreezer_ptraced ok 10 test_cgfreezer_vfork Reported-by:
Mark Crossen <mcrossen@fb.com> Signed-off-by:
Roman Gushchin <guro@fb.com> Fixes: 76f969e8 ("cgroup: cgroup v2 freezer") Cc: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Roman Gushchin authored
Add a new cgroup freezer selftest, which checks that if a cgroup is frozen, their new child cgroups will properly inherit the frozen state. It creates a parent cgroup, freezes it, creates a child cgroup and populates it with a dummy process. Then it checks that both parent and child cgroup are frozen. Signed-off-by:
Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Chris Wilson authored
The userptr put_pages can be called from inside try_to_unmap, and so enters with the page lock held on one of the object's backing pages. We cannot take the page lock ourselves for fear of recursion. Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reported-by:
Martin Wilck <Martin.Wilck@suse.com> Reported-by:
Leo Kraav <leho@kraav.com> Fixes: aa56a292 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: https://bugzilla.kernel.org/show_bug.cgi?id=203317Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Pull clone3 fix from Christian Brauner: "This is a last-minute bugfix for clone3() that should go in before we release 5.3 with clone3(). clone3() did not verify that the exit_signal argument was set to a valid signal. This can be used to cause a crash by specifying a signal greater than NSIG. e.g. -1. The commit from Eugene adds a check to copy_clone_args_from_user() to verify that the exit signal is limited by CSIGNAL as with legacy clone() and that the signal is valid. With this we don't get the legacy clone behavior were an invalid signal could be handed down and would only be detected and then ignored in do_notify_parent(). Users of clone3() will now get a proper error right when they pass an invalid exit signal. Note, that this is not a change in user-visible behavior since no kernel with clone3() has been released yet" * tag 'for-linus-20190912' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: fork: block invalid exit signals with clone3()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A KVM guest fix, and a kdump kernel relocation errors fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timer: Force PIT initialization when !X86_FEATURE_ARAT x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes for v5.3 final: - Constify modes whitelist harder. - Fix lima driver gem_wait ioctl. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/99e52e7a-d4ce-6a2c-0501-bc559a710955@linux.intel.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-09-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Final drm/i915 fixes for v5.3: - Fox DP MST high color depth regression - Fix GPU hangs on Vulkan compute workloads Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877e6e27qm.fsf@intel.com
-
Eugene Syromiatnikov authored
Previously, higher 32 bits of exit_signal fields were lost when copied to the kernel args structure (that uses int as a type for the respective field). Moreover, as Oleg has noted, exit_signal is used unchecked, so it has to be checked for sanity before use; for the legacy syscalls, applying CSIGNAL mask guarantees that it is at least non-negative; however, there's no such thing is done in clone3() code path, and that can break at least thread_group_leader. This commit adds a check to copy_clone_args_from_user() to verify that the exit signal is limited by CSIGNAL as with legacy clone() and that the signal is valid. With this we don't get the legacy clone behavior were an invalid signal could be handed down and would only be detected and ignored in do_notify_parent(). Users of clone3() will now get a proper error when they pass an invalid exit signal. Note, that this is not user-visible behavior since no kernel with clone3() has been released yet. The following program will cause a splat on a non-fixed clone3() version and will fail correctly on a fixed version: #define _GNU_SOURCE #include <linux/sched.h> #include <linux/types.h> #include <sched.h> #include <stdio.h> #include <stdlib.h> #include <sys/syscall.h> #include <sys/wait.h> #include <unistd.h> int main(int argc, char *argv[]) { pid_t pid = -1; struct clone_args args = {0}; args.exit_signal = -1; pid = syscall(__NR_clone3, &args, sizeof(struct clone_args)); if (pid < 0) exit(EXIT_FAILURE); if (pid == 0) exit(EXIT_SUCCESS); wait(NULL); exit(EXIT_SUCCESS); } Fixes: 7f192e3c ("fork: add clone3") Reported-by:
Oleg Nesterov <oleg@redhat.com> Suggested-by:
Oleg Nesterov <oleg@redhat.com> Suggested-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Link: https://lore.kernel.org/r/4b38fa4ce420b119a4c6345f42fe3cec2de9b0b5.1568223594.git.esyr@redhat.com [christian.brauner@ubuntu.com: simplify check and rework commit message] Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com>
-
Thomas Huth authored
When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject an interrupt, we convert them from the legacy struct kvm_s390_interrupt to the new struct kvm_s390_irq via the s390int_to_s390irq() function. However, this function does not take care of all types of interrupts that we can inject into the guest later (see do_inject_vcpu()). Since we do not clear out the s390irq values before calling s390int_to_s390irq(), there is a chance that we copy random data from the kernel stack which could be leaked to the userspace later. Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT interrupt: s390int_to_s390irq() does not handle it, and the function __inject_pfault_init() later copies irq->u.ext which contains the random kernel stack data. This data can then be leaked either to the guest memory in __deliver_pfault_init(), or the userspace might retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl. Fix it by handling that interrupt type in s390int_to_s390irq(), too, and by making sure that the s390irq struct is properly pre-initialized. And while we're at it, make sure that s390int_to_s390irq() now directly returns -EINVAL for unknown interrupt types, so that we immediately get a proper error code in case we add more interrupt types to do_inject_vcpu() without updating s390int_to_s390irq() sometime in the future. Cc: stable@vger.kernel.org Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.comSigned-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Christophe JAILLET authored
The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: 8e2d61e0 ("sctp: fix race on protocol/netns initialization") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-