- 27 Oct, 2017 40 commits
-
-
Vivien Didelot authored
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by:
-
Vivien Didelot authored
Most of the DSA code still check ds->enabled_port_mask directly to inspect a given port type instead of using the provided dsa_is_user_port helper. Change this. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vivien Didelot authored
This patch renames dsa_is_normal_port to dsa_is_user_port because "user" is the correct term in the DSA terminology, not "normal". Signed-off-by:
-
Vivien Didelot authored
In order to know if a port is of type user, dsa_is_normal_port checks that the given port is not of type DSA nor CPU. This is not enough because a port can be unused. Without the previous fix, this caused the unused mv88e6xxx ports to be configured in normal mode. The ds->enabled_port_mask reports the user ports, so check this instead. Signed-off-by:
-
Vivien Didelot authored
The unused ports are currently configured in normal mode. This does not prevent the switch from being functional, but it is unnecessary. Skip unused ports. Signed-off-by:
-
Vivien Didelot authored
As the comment above the chunk states, the b53 driver attempts to disable the unused ports. But using ds->enabled_port_mask is misleading, because this mask reports in fact the user ports. To avoid confusion and fix this, this patch introduces an explicit dsa_is_unused_port helper which ensures the corresponding bit is not masked in any of the switch port masks. Signed-off-by:
-
Gustavo A. R. Silva authored
Notice that in this particular case unlikely() is already being called inside BUG_ON macro. This issue was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Use BUG_ON instead of if condition followed by BUG. Something to notice in this particular case is that unlikely() is already being called inside BUG_ON macro. This issue was detected with the help of Coccinelle. Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: collect more hardware dumps via ethtool This series of patches collect more firmware and hardware dumps via ethool --get-dump facility. Patch 1 collects hardware logic analyzer dumps. Patch 2 collects CIM queue configuration dump. Patch 3 collects RSS dumps. Patch 4 collects TID info dump. Patch 5 collects MPS-TCAM dump. Patch 6 collects PBT tables dump. Patch 7 collects hardware scheduler and pace table dumps. Patch 8 collects miscellaneous hardware information, including path mtu, PM stats, TP clock info, congestion control, and VPD data dumps. ==================== Signed-off-by: -
Rahul Lakkireddy authored
Collect path mtu, PM stats, TP clock info, congestion control, and VPD data dumps. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Collect hardware TX traffic scheduler and pace tables. Signed-off-by:
-
Rahul Lakkireddy authored
Signed-off-by:
-
Rahul Lakkireddy authored
Signed-off-by:
-
Rahul Lakkireddy authored
Signed-off-by:
-
Rahul Lakkireddy authored
Collect RSS table and RSS VF configuration dumps. Signed-off-by:
-
Rahul Lakkireddy authored
Signed-off-by:
-
Rahul Lakkireddy authored
Collect CIM, CIM_MA, ULP_RX, TP, CIM_PIF, and ULP_TX logic analyzer dumps. Signed-off-by:
-
David S. Miller authored
Egil Hjelmeland says: ==================== net: dsa: lan9303: Learn addresses on CPU port when bridged When CPU transmit directly to port using tag, the LAN9303 does not learn MAC addresses received on the CPU port into the ALR table. ALR learning is performed only when transmitting using ALR lookup. Solution: If the two external ports are bridged and the packet is not STP BPDU, then use ALR lookup to allow ALR learning on CPU port. Otherwise transmit directly to port with STP state override. The first patch moves struct lan9303 to include/linux/dsa/lan9303.h in order to prepare for the second patch. Changes v1 -> v2: - new file: include/linux/dsa/lan9303.h instead of include/linux/lan9303.h - include linux/if_ether.h in include/linux/dsa/lan9303.h - renamed lan9303_tx_use_arl to lan9303_xmit_use_arl for consistency. - removed inline keyword to lan9303_xmit_use_arl ==================== Signed-off-by: -
Egil Hjelmeland authored
When CPU transmit directly to port using tag, the LAN9303 does not learn MAC addresses received on the CPU port into the ALR. ALR learning is performed only when transmitting using ALR lookup. Solution: If the two external ports are bridged and the packet is not STP BPDU, then use ALR lookup to allow ALR learning on CPU port. Otherwise transmit directly to port with STP state override. Signed-off-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Egil Hjelmeland authored
The next patch require net/dsa/tag_lan9303.c to access struct lan9303. Therefore move struct lan9303 definitions from drivers/net/dsa/lan9303.h to new file include/linux/dsa/lan9303.h. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: small cleanup Couple of small cleanup patches from Nogah. ==================== Signed-off-by: -
Nogah Frankel authored
Replace recurring magic number in PPCNT register with a define. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Nogah Frankel authored
Change the HW stats cache to be local. Rename it for better clarity. It holds the results of the last result of HW stats that are being read periodically, in order to have answer for stats request immediately. Signed-off-by:
-
Gianluca Borello authored
commit afdb09c7 ("security: bpf: Add LSM hooks for bpf object related syscall") included linux/bpf.h in linux/security.h. As a result, bpf programs including bpf_helpers.h and some other header that ends up pulling in also security.h, such as several examples under samples/bpf, fail to compile because bpf_tail_call and bpf_get_stackid are now "redefined as different kind of symbol". >From bpf.h: u64 bpf_tail_call(u64 ctx, u64 r2, u64 index, u64 r4, u64 r5); u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); Whereas in bpf_helpers.h they are: static void (*bpf_tail_call)(void *ctx, void *map, int index); static int (*bpf_get_stackid)(void *ctx, void *map, int flags); Fix this by removing the unused declaration of bpf_tail_call and moving the declaration of bpf_get_stackid in bpf_trace.c, which is the only place where it's needed. Signed-off-by:
Gianluca Borello <g.borello@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Felix Manlunas authored
Deprecate the 1-bit flag (bit 2 in the SLI_SCRATCH_1 Octeon register) that indicates that the liquidio watchdog kernel thread is running for this NIC. Reason is: it is incompatible with the firmware's use for SLI_SCRATCH_1. In lieu of checking that now-deprecated flag, check the value of oct_dev->adapter_refcount to determine whether or not to create the watchdog kernel thread. Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
-
Florian Fainelli authored
Check that the master network device that is signaled through the DSA notifier is actually going to be ourself, otherwise, we could just be de-referencing garbage from other drivers. Fixes: 84ff33eeb23d ("net: systemport: Establish DSA network device queue mapping") Signed-off-by: -
Florian Fainelli authored
Remove the code that tried to identify if a PHY designated by Device Tree required diversion through the DSA-created MDIO bus. This was created mainly for the bcm_sf2.c driver back when it did not have its own MDIO bus driver, which it now has since 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus"). Signed-off-by:
Martin Hundebøll <mnhu@prevas.dk> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: move 14 sysctls to namespaces Ideally all TCP sysctls should be per netns. This patch series takes care of 14 of sysctls. More to come later. ==================== Signed-off-by: -
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
This extern is no longer used. Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
