- 18 May, 2021 3 commits
-
-
Xie Yongji authored
We should call virtio_gpu_deinit() to free virtqueues when drm_dev_register() failed. Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-3-xieyongji@bytedance.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Xie Yongji authored
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure. But such failure will be caught by virtio_gpu_probe() and then virtio_gpu_release() will be called to do some cleanup which will free vgdev and vgdev->vbufs again. So let's set dev->dev_private to NULL to avoid double free. Signed-off-by:
-
Xie Yongji authored
The dev->dev_private might not be allocated if virtio_gpu_pci_quirk() or virtio_gpu_init() failed. In this case, we should avoid the cleanup in virtio_gpu_release(). Signed-off-by:
-
- 17 May, 2021 8 commits
-
-
Thomas Zimmermann authored
The functionality is only implemented for legacy drivers. Mark the ioctl as legacy and move the code behind CONFIG_DRM_LEGACY. If legacy drivers are disabled, the ioctl call now returns -EINVAL instead of -EOPNOTSUPP. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210516195135.3755-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
The legacy PCI init code sets the drvdata for drivers with MODESET flag, but none of the old UMS drivers sets the flag. Remove the branch. Signed-off-by:
-
Thomas Zimmermann authored
DRM leases do not use DRM legacy code. Remove the rsp include statement. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Nouveau does not use DRM legacy code. Remove the rsp. include statement. Signed-off-by:
-
Thomas Zimmermann authored
i915 does not use DRM legacy code. Remove the rsp include statements. Signed-off-by:
-
Paul Cercueil authored
When using a 24-bit panel on a 8-bit serial bus, the pixel clock requested by the panel has to be multiplied by 3, since the subpixels are shifted sequentially. The code (in ingenic_drm_encoder_atomic_check) already computed crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate() used crtc_state->adjusted_mode->clock instead. Fixes: 28ab7d35 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel") Cc: stable@vger.kernel.org # v5.10 Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780 (HDMI) and Alpha400/jz4730 (LCD) Acked-by:
-
Lukas Bulwahn authored
Commit 11e8f5fd ("drm: Add simpledrm driver") adds the file ./drivers/gpu/drm/tiny/simpledrm.c, but refers to the file ./drivers/gpu/drm/tiny/simplekms.c with the new MAINTAINERS section DRM DRIVER FOR SIMPLE FRAMEBUFFERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/gpu/drm/tiny/simplekms.c Repair the file entry by referring to the right location. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Zou Wei authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 16 May, 2021 1 commit
-
-
Yang Yingliang authored
Fix the following make W=1 kernel build warning: drivers/gpu/drm/drm_context.c:136: warning: expecting prototype for drm_ctxbitmap_flush(). Prototype was for drm_legacy_ctxbitmap_flush() instead Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
- 15 May, 2021 1 commit
-
-
Dan Carpenter authored
The drm_format_info() function returns NULL if the format is unsupported, but the simplefb_get_validated_format() is expected to return error pointers. If we propagate the NULL return then it will lead to a NULL dereference in the callers. Swap the NULL and trade it in for an ERR_PTR(-EINVAL). Fixes: 11e8f5fd ("drm: Add simpledrm driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 14 May, 2021 6 commits
-
-
Qiheng Lin authored
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. After that, the error code -ENOMEM should be returned. Reported-by:
Qiheng Lin <linqiheng@huawei.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514082812.1697-1-linqiheng@huawei.com
-
Colin Ian King authored
The allocation of fifo is lacking an allocation failure check, so fix this by adding one. In the case where fifo->static_buffer fails to be allocated the error return path neglects to kfree the fifo object. Fix this by adding in the missing kfree. Kudos to Dan Carpenter for spotting the missing kzalloc failure check. Addresses-Coverity: ("Resource leak") Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nicolas Boichat authored
Add support for MT8183's G72 Bifrost. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Nicolas Boichat authored
GPUs with more than a single regulator (e.g. G72 on MT8183) will require platform-specific handling for devfreq, for 2 reasons: 1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator) does not support multiple regulators, so we'll need custom handlers. 2. Generally, platforms with 2 regulators have platform-specific constraints on how the voltages should be set (e.g. minimum/maximum voltage difference between them), so we should not just create generic handlers that simply change the voltages without taking care of those constraints. Disable devfreq for now on those GPUs. Signed-off-by: -
Nicolas Boichat authored
Define a compatible string for the Mali Bifrost GPU found in Mediatek's MT8183 SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 13 May, 2021 7 commits
-
-
David M Nieto authored
The proper metric for fence utilization over several contexts is an harmonic mean, but such calculation is prohibitive in kernel space, so the code approximates it. Because the approximation diverges when one context has a very small ratio compared with the other context, this change filter out ratios smaller that 0.01% v2: make the fence calculation static and initialize variables within that function v3: Fix warnings (Alex) Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
David M Nieto <david.nieto@amd.com> Signed-off-by:
-
David M Nieto authored
Free the resources if the fence needs to be ignored during the ratio calculation Reviewed-by:
-
Colin Ian King authored
There are two occurrances where objects are being free'd via a put call and yet they are being referenced after this. Fix these by adding in the missing continue statement so that the put on the end of the loop is skipped over. Signed-off-by:
-
Zou Wei authored
Add the missing unlock before return from function devm_aperture_acquire() in the error handling case. Signed-off-by:
-
Randy Dunlap authored
struct resource start and end fields are not always long long, so using %llx to print them can cause build warnings (below). Fix these by using the special "%pr" for printing struct resource info. ../drivers/gpu/drm/tiny/simpledrm.c: In function ‘simpledrm_device_init_mm’: ../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=] ../drivers/gpu/drm/tiny/simpledrm.c:533:54: note: format string is defined here drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n", ~~~^ %x ../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=] ../drivers/gpu/drm/tiny/simpledrm.c:533:61: note: format string is defined here drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n", ~~~^ %x Fixes: 4aae79f7 ("drm/simpledrm: Acquire memory aperture for framebuffer") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Thomas Zimmermann authored
The pdev field got removed from struct drm_device recently. Replace the invalid reference with an upcast from the struct's dev field. Signed-off-by:
Dave Airlie <airlied@redhat.com> Reported-by:
-
Paul Cercueil authored
It should have been an OVERLAY from the beginning. The documentation stipulates that there should be an unique PRIMARY plane per CRTC. Fixes: fc1acf31 ("drm/ingenic: Add support for the IPU") Cc: <stable@vger.kernel.org> # 5.8+ Signed-off-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20210329175046.214629-2-paul@crapouillou.net
-
- 12 May, 2021 6 commits
-
-
Zhen Lei authored
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by:
Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
-
Christian König authored
Since Chunming Zhou left AMD last year we are down to only two maintainers once more. So add Xinhu Pan as another contact as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Xinhui Pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210505110146.11689-1-christian.koenig@amd.com
-
Gerd Hoffmann authored
The shadow bo is created in pinned state, so we have to unpin it when dropping the reference. Otherwise ttm is unhappy and throws a WARN() on release. Signed-off-by:
-
Gerd Hoffmann authored
Not needed, qxl_io_destroy_primary() does that for us. Signed-off-by:
-
Daniel Vetter authored
It's very confusing for userspace to have to deal with inconsistencies here, and some drivers screwed this up a bit. Most just ommitted the format list when they meant to say that only linear modifier is allowed, but some also meant that only implied modifiers are acceptable (because actually none of the planes registered supported modifiers). Now that this is all done consistently across all drivers, document the rules and enforce it in the drm core. v2: - Make the capability a link (Simon) - Note that all is lost before 5.1. v3: - Use drm_WARN_ON (Lyude) Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Cc: Simon Ser <contact@emersion.fr> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210506132343.2873699-1-daniel.vetter@ffwll.ch
-
kernel test robot authored
drivers/gpu/drm/kmb/kmb_dsi.c:284:3-4: Unneeded semicolon drivers/gpu/drm/kmb/kmb_dsi.c:304:3-4: Unneeded semicolon drivers/gpu/drm/kmb/kmb_dsi.c:321:3-4: Unneeded semicolon drivers/gpu/drm/kmb/kmb_dsi.c:340:3-4: Unneeded semicolon drivers/gpu/drm/kmb/kmb_dsi.c:364:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: ade89646 ("drm: DRM_KMB_DISPLAY should depend on ARCH_KEEMBAY") CC: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 11 May, 2021 8 commits
-
-
Zack Rusin authored
This change fixes all of the arm64 issues we've had in the driver. ARM support is provided in svga version 3, for which support we've added in previous changes. svga version 3 currently lacks many of the advanced features (in particular 3D support is lacking) but that will change in time. Signed-off-by:
Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-7-zackr@vmware.com
-
Zack Rusin authored
SVGA3 is the next version of our PCI device. Some of the changes include using MMIO for register accesses instead of ioports, deprecating the FIFO MMIO and removing a lot of the old and legacy functionality. SVGA3 doesn't support guest backed objects right now so everything except 3D is working. v2: Fixes all the static analyzer warnings Signed-off-by:
-
Zack Rusin authored
Now since Christian reworked TTM to always keep objects on the LRU list unless they are pinned we shouldn't need the reservation semaphore. It makes the driver code a lot cleaner, especially because it was a little hard to reason when and where the reservation semaphore needed to be held. Signed-off-by:
-
Thomas Hellstrom authored
In cases where the dirty linear memory range spans multiple sample sheets in a surface, the dirty surface region is incorrectly computed. To do this correctly and in an optimized fashion we would have to compute the dirty region of each sample sheet and compute the union of those regions. But assuming that cpu writing to a multisample surface is rather a corner case than a common case, just set the dirty region to the full surface. This fixes OpenGL piglit errors with SVGA_FORCE_COHERENT=1 and the piglit test: fbo-depthstencil blit default_fb -samples=2 -auto Fixes: 9ca7d19f ("drm/vmwgfx: Add surface dirty-tracking callbacks") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Charmaine Lee <charmainel@vmware.com> Reviewed-by:
-
Thomas Hellstrom authored
The SVGA3dCmdDXGenMips command uses a shader-resource view to access the underlying surface. Normally accesses using that view-type are not dirtying the underlying surface, but that particular command is an exception. Mark the surface gpu-dirty after a SVGA3dCmdDXGenMips command has been submitted. This fixes the piglit getteximage-formats test run with SVGA_FORCE_COHERENT=1 Fixes: a9f58c45 ("drm/vmwgfx: Be more restrictive when dirtying resources") Signed-off-by:
-
Zack Rusin authored
SVGA_REG_ENABLE is a register name, and SVGA_REG_ENABLE_(ENABLE| DISABLE|HIDE) are its valid values. We were incorrectly setting the register value to itself. This happened to work because the SVGA_REG_ENABLE is happens to to be the same value as SVGA_REG_ENABLE_ENABLE, but is still semantically incorrect. Lets use the correct enum when setting SVGA_REG_ENABLE. Signed-off-by:
-
Zhen Lei authored
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by:
-
Thomas Zimmermann authored
Backmerging to get v5.12 fixes. Requested for vmwgfx. Signed-off-by:
-
