- 02 May, 2020 31 commits
-
-
Lars-Peter Clausen authored
commit f954b098 upstream. When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt the EOS interrupt should be cleared from the status register. Otherwise it is possible that it was still set from a previous capture. If that is the case the interrupt would fire immediately even though no conversion has been done yet and stale data is being read from the device. The old code only clears the interrupt if the interrupt was previously unmasked. Which does not make much sense since the interrupt is always masked at this point and in addition masking the interrupt does not clear the interrupt from the status register. So the clearing needs to be done unconditionally. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
commit e44ec779 upstream. The check for shutting down the second ADC is inverted. This causes it to be powered down when it should be enabled. As a result channels that are supposed to be handled by the second ADC return invalid conversion results. Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit a8cf44f0 ] The commit 3c6fd1f0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. This patch reverts the corresponding entry as a temporary solution. Although Zenith II and co will see get the empty HD-audio bus again, it'd be merely resource wastes and won't affect the functionality, so it's no end of the world. We'll need to address this later, e.g. by either switching to DMI string matching or using PCI ID & SSID pairs. Fixes: 3c6fd1f0 ("ALSA: hda: Add driver blacklist") Reported-by:
Johnathan Smithinovic <johnathan.smithinovic@gmx.at> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Ahern authored
[ Upstream commit 0c922a48 ] IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by xfrm code to tell other skb handlers that the packet has been passed through the xfrm output functions. Simplify the code and just always set them rather than conditionally based on netfilter enabled thus making the flag available for other users. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c2e77a18 ] The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 1c30fbc7 ] When team mode is changed or set, the team_mode_get() is called to check whether the mode module is inserted or not. If the mode module is not inserted, it calls the request_module(). In the request_module(), it creates a child process, which is the "modprobe" process and waits for the done of the child process. At this point, the following locks were used. down_read(&cb_lock()); by genl_rcv() genl_lock(); by genl_rcv_msc() rtnl_lock(); by team_nl_cmd_options_set() mutex_lock(&team->lock); by team_nl_team_get() Concurrently, the team module could be removed by rmmod or "modprobe -r" The __exit function of team module is team_module_exit(), which calls team_nl_fini() and it tries to acquire following locks. down_write(&cb_lock); genl_lock(); Because of the genl_lock() and cb_lock, this process can't be finished earlier than request_module() routine. The problem secenario. CPU0 CPU1 team_mode_get request_module() modprobe -r team_mode_roundrobin team <--(B) modprobe team <--(A) team_mode_roundrobin By request_module(), the "modprobe team_mode_roundrobin" command will be executed. At this point, the modprobe process will decide that the team module should be inserted before team_mode_roundrobin. Because the team module is being removed. By the module infrastructure, the same module insert/remove operations can't be executed concurrently. So, (A) waits for (B) but (B) also waits for (A) because of locks. So that the hang occurs at this point. Test commands: while : do teamd -d & killall teamd & modprobe -rv team_mode_roundrobin & done The approach of this patch is to hold the reference count of the team module if the team module is compiled as a module. If the reference count of the team module is not zero while request_module() is being called, the team module will not be removed at that moment. So that the above scenario could not occur. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9bacd256 ] TCP stack is dumb in how it cooks its output packets. Depending on MAX_HEADER value, we might chose a bad ending point for the headers. If we align the end of TCP headers to cache line boundary, we make sure to always use the smallest number of cache lines, which always help. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Xiyu Yang authored
[ Upstream commit f35d1297 ] x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a reference of the specified x25_neigh object to "nb" with increased refcnt. When x25_lapb_receive_frame() returns, local variable "nb" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of x25_lapb_receive_frame(). When pskb_may_pull() returns false, the function forgets to decrease the refcnt increased by x25_get_neigh(), causing a refcnt leak. Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns false. Fixes: cb101ed2 ("x25: Handle undersized/fragmented skbs") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Xiyu Yang authored
[ Upstream commit d03f2284 ] nr_add_node() invokes nr_neigh_get_dev(), which returns a local reference of the nr_neigh object to "nr_neigh" with increased refcnt. When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one normal path of nr_add_node(), which forgets to decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt leak. It should decrease the refcnt before the function returns like other normal paths do. Fix this issue by calling nr_neigh_put() before the nr_add_node() returns. Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 4dee15b4 ] In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur. bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1 The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL. Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ] Fixes: e289fd28 ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 7f327080 ] When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
-
John Haxby authored
[ Upstream commit 82c9ae44 ] Commit b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a problem found by syzbot an unfortunate logic error meant that it also broke IPV6_ADDRFORM. Rearrange the checks so that the earlier test is just one of the series of checks made before moving the socket from IPv6 to IPv4. Fixes: b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation") Signed-off-by:
John Haxby <john.haxby@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 35efea32 ] Previously Clock PM could not be re-enabled after being disabled by pci_disable_link_state() because clkpm_capable was reset. Change this by adding a clkpm_disable field similar to aspm_disable. Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.comSigned-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 2c25b07e ] The newer 2711 and 7211 chips have two PWM controllers and failure to dynamically allocate the PWM base would prevent the second PWM controller instance being probed for succeeding with an -EEXIST error from alloc_pwms(). Fixes: e5a06dc5 ("pwm: Add BCM2835 PWM driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit d5a3c7a4 ] Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should always be disabled after the removal of the PWM chip, even if the latter failed. Fixes: 99b82abb ("pwm: Add Renesas TPU PWM driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Cornelia Huck authored
[ Upstream commit 05ce3e53 ] The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The io_subchannel driver will do so when the associated ccw_device has been registered -- but unconditionally, so more ADD uevents will be generated if a subchannel has been unbound from the io_subchannel driver and later rebound. To fix this, only generate the ADD event if uevents were still suppressed for the device. Fixes: fa1a8c23 ("s390: cio: Delay uevents for subchannels") Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by:
Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 89163f93 ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Waiman Long <longman@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit f4d74ef6 ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 81630dc0 ] sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held. So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path. Fixes: 24c8d141 ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Wu Bo authored
[ Upstream commit 13e60d3b ] If the daemon is restarted or crashes while logging out of a session, the unbind session event sent by the kernel is not processed and is lost. When the daemon starts again, the session can't be unbound because the daemon is waiting for the event message. However, the kernel has already logged out and the event will not be resent. When iscsid restart is complete, logout session reports error: Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260] iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260]. iscsiadm: initiator reported error (9 - internal error) iscsiadm: Could not logout of all requested sessions Make sure the unbind event is emitted. [mkp: commit desc and applied by hand since patch was mangled] Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 1451a3ee ] Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should be disabled after the removal of the PWM chip. Fixes: ed6c1476 ("pwm: Add support for R-Car PWM Timer") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Yan, Zheng authored
[ Upstream commit 0aa971b6 ] 1. try_get_cap_refs() fails to get caps and finds that mds_wanted does not include what it wants. It returns -ESTALE. 2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds that inode has cap, so it calls ceph_check_caps(). 3. ceph_check_caps() finds that issued caps (without checking if it's stale) already includes caps wanted by open file, so it skips updating wanted caps. Above events can cause an infinite loop inside ceph_get_caps(). Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Qiujun Huang authored
[ Upstream commit c6d50296 ] Return the error returned by ceph_mdsc_do_request(). Otherwise, r_target_inode ends up being NULL this ends up returning ENOENT regardless of the error. Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Reviewed-by:
-
James Smart authored
[ Upstream commit 38503943 ] The following kasan bug was called out: BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc] Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676 ... Call Trace: dump_stack+0x96/0xe0 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] print_address_description.constprop.6+0x1b/0x220 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] ? lpfc_unreg_login+0x7c/0xc0 [lpfc] __kasan_report.cold.9+0x37/0x7c ? lpfc_unreg_login+0x7c/0xc0 [lpfc] kasan_report+0xe/0x20 lpfc_unreg_login+0x7c/0xc0 [lpfc] lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc] ... When processing the completion of a "Reg Rpi" login mailbox command in lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is extracted from the completing mailbox context and passed as an input for the next. However, the vpi stored in the mailbox command context is an absolute vpi, which for SLI4 represents both base + offset. When used with a non-zero base component, (function id > 0) this results in an out-of-range access beyond the allocated phba->vpi_ids array. Fix by subtracting the function's base value to get an accurate vpi number. Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.comSigned-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Tero Kristo authored
[ Upstream commit 982bb705 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Jeremy Sowden authored
commit 01ce31c5 upstream. Removed info log-message if ipip tunnel registration fails during module-initialization: it adds nothing to the error message that is written on all failures. Fixes: dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Wei Yongjun authored
commit ce4e4584 upstream. Fixes the following sparse warnings: drivers/crypto/mxs-dcp.c:39:15: warning: symbol 'sha1_null_hash' was not declared. Should it be static? drivers/crypto/mxs-dcp.c:43:15: warning: symbol 'sha256_null_hash' was not declared. Should it be static? Fixes: c709eeba ("crypto: mxs-dcp - Fix SHA null hashes and output length") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Rob Clark authored
commit 9f614197 upstream. Looks like the dma_sync calls don't do what we want on armv7 either. Fixes: Unable to handle kernel paging request at virtual address 50001000 pgd = (ptrval) [50001000] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc6-00271-g9f159ae0 #4 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at v7_dma_clean_range+0x20/0x38 LR is at __dma_page_cpu_to_dev+0x28/0x90 pc : [<c011c76c>] lr : [<c01181c4>] psr: 20000013 sp : d80b5a88 ip : de96c000 fp : d840ce6c r10: 00000000 r9 : 00000001 r8 : d843e010 r7 : 00000000 r6 : 00008000 r5 : ddb6c000 r4 : 00000000 r3 : 0000003f r2 : 00000040 r1 : 50008000 r0 : 50001000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 70004019 DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) Signed-off-by:
Rob Clark <robdclark@chromium.org> Fixes: 3de433c5 ("drm/msm: Use the correct dma_sync calls in msm_gem") Tested-by:
Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Arnd Bergmann authored
commit 773daa3c upstream. The newly introudced ip_min_valid_pmtu variable is only used when CONFIG_SYSCTL is set: net/ipv4/route.c:135:12: error: 'ip_min_valid_pmtu' defined but not used [-Werror=unused-variable] This moves it to the other variables like it, to avoid the harmless warning. Fixes: c7272c2f ("net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Nicolai Stange authored
commit 20b50d79 upstream. Commit 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") fixed the issue of possibly inconsistent ->hdrincl handling due to concurrent updates by reading this bit-field member into a local variable and using the thus stabilized value in subsequent tests. However, aforementioned commit also adds the (correct) comment that /* hdrincl should be READ_ONCE(inet->hdrincl) * but READ_ONCE() doesn't work with bit fields */ because as it stands, the compiler is free to shortcut or even eliminate the local variable at its will. Note that I have not seen anything like this happening in reality and thus, the concern is a theoretical one. However, in order to be on the safe side, emulate a READ_ONCE() on the bit-field by doing it on the local 'hdrincl' variable itself: int hdrincl = inet->hdrincl; hdrincl = READ_ONCE(hdrincl); This breaks the chain in the sense that the compiler is not allowed to replace subsequent reads from hdrincl with reloads from inet->hdrincl. Fixes: 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") Signed-off-by:
Nicolai Stange <nstange@suse.de> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Dmitry Monakhov authored
commit 4068664e upstream. Extents are cached in read_extent_tree_block(); as a result, extents are not cached for inodes with depth == 0 when we try to find the extent using ext4_find_extent(). The result of the lookup is cached in ext4_map_blocks() but is only a subset of the extent on disk. As a result, the contents of extents status cache can get very badly fragmented for certain workloads, such as a random 4k read workload. File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 8191: 40960.. 49151: 8192: last,eof $ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test $ perf script | grep ext4_es_insert_extent | head -n 10 fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W Fix this by caching the extents for inodes with depth == 0 in ext4_find_extent(). [ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this newly added function is not in extents_cache.c, and to avoid potential visual confusion with ext4_es_cache_extent(). -TYT ] Signed-off-by:
Dmitry Monakhov <dmonakhov@gmail.com> Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 24 Apr, 2020 9 commits
-
-
Greg Kroah-Hartman authored
-
Samuel Neves authored
commit e78e5a91 upstream. In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540 ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by:
Samuel Neves <sneves@dei.uc.pt> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.ptSigned-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Evalds Iodzevics authored
On Intel it is required to do CPUID(1) before reading the microcode revision MSR. Current code in 4.4 an 4.9 relies on sync_core() to call CPUID, unfortunately on 32 bit machines code inside sync_core() always jumps past CPUID instruction as it depends on data structure boot_cpu_data witch are not populated correctly so early in boot sequence. It depends on: commit 5dedade6 ("x86/CPU: Add native CPUID variants returning a single datum") This patch is for 4.4 but also should apply to 4.9 Signed-off-by:
Evalds Iodzevics <evalds.iodzevics@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Borislav Petkov authored
commit 5dedade6 upstream. ... similarly to the cpuid_<reg>() variants. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170109114147.5082-2-bp@alien8.deSigned-off-by:
-
Wen Yang authored
commit 49c64df8 upstream. The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58 ("mtd: fix memory leaks in phram_setup") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.comSigned-off-by:
-
Dan Carpenter authored
commit 4da0ea71 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc00439 ("[MTD] LPDDR qinfo probing.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Paul E. McKenney authored
commit 80c503e0 upstream. The __torture_print_stats() function in locktorture.c carefully initializes local variable "min" to statp[0].n_lock_acquired, but then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail field should normally be zero, and given the initialization, it seems reasonable to display the maximum and minimum number acquisitions instead of miscomputing the maximum and minimum number of failures. This commit therefore switches from failures to acquisitions. And this turns out to be not only a day-zero bug, but entirely my own fault. I hate it when that happens! Fixes: 0af3fe1e ("locktorture: Add a lock-torture kernel module") Reported-by:
Will Deacon <will@kernel.org> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Acked-by:
-
Stephen Rothwell authored
commit 3670664b upstream. ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaf ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> [mpe: Trim warnings from change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.auSigned-off-by:
-
Dan Carpenter authored
commit d3d19d6f upstream. The "fix" struct has a 2 byte hole after ->ywrapstep and the "fix = info->fix;" assignment doesn't necessarily clear it. It depends on the compiler. The solution is just to replace the assignment with an memcpy(). Fixes: 1f5e31d7 ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountainSigned-off-by:
-
