- 05 Dec, 2023 2 commits
-
-
Marijn Suijten authored
This pointer callback is never used and should be removed. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [DB: dropped the helpers completely, which are unused now] Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
-
Dmitry Baryshkov authored
The function _dpu_hw_sspp_setup_scaler3() passes and dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way the scaler (QSEED3) block should be programmed. However up to now we were not setting this field. Set it now, splitting the vig_sblk data which has different version fields. Reported-by:
-
- 04 Dec, 2023 1 commit
-
-
Harshit Mogalapalli authored
When pm_runtime_resume_and_get() fails, unlock before returning. Fixes: 5814b8bf ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
- 03 Dec, 2023 31 commits
-
-
Konrad Dybcio authored
Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Konrad Dybcio authored
This helper has been introduced to avoid programmer errors (missing _put calls leading to dangling refcnt) when using pm_runtime_get, use it. While at it, start checking the return value. Signed-off-by:
-
Bjorn Andersson authored
Similar to SC8280XP, the misconfigured SAFE logic causes rather significant delays in __arm_smmu_tlb_sync(), resulting in poor performance for things such as USB. Introduce appropriate SAFE values for SC8180X to correct this. Fixes: f3af2d6e ("drm/msm/dpu: Add SC8180x to hw catalog") Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Reported-by:
Anton Bambura <jenneron@postmarketos.org> Reviewed-by:
-
Paloma Arellano authored
Trigger a devcoredump to dump dpu registers and capture the drm atomic state when the frame_done_timer timeouts. v2: Optimize the format in which frame_done_timeout_cnt is incremented v3: Describe parameter frame_done_timeout_cnt in dpu_encoder_virt Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312010225.2OJWLKmA-lkp@intel.com/Reviewed-by:
Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by:
-
Rob Clark authored
The UBWC settings need to match between the display and GPU. When we updated the GPU settings, we forgot to make the corresponding update on the display side. Reported-by:
Steev Klimaszewski <steev@kali.org> Fixes: 07e6de73 ("drm/msm/a690: Fix reg values for a690") Signed-off-by:
Rob Clark <robdclark@chromium.org> Tested-by:
-
Kuogee Hsieh authored
Currently eDP population is done at msm_dp_modeset_init() which happen at binding time. Move eDP population to be done at display probe time so that probe deferral cases can be handled effectively. wait_for_hpd_asserted callback is added during drm_dp_aux_init() to ensure eDP's HPD is up before proceeding eDP population. Changes in v5: -- inline dp_display_auxbus_population() and delete it Changes in v4: -- delete duplicate initialize code to dp_aux before drm_dp_aux_register() -- delete of_get_child_by_name(dev->of_node, "aux-bus") and inline the function -- not initialize rc = 0 Changes in v3: -- add done_probing callback into devm_of_dp_aux_populate_bus() Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Kuogee Hsieh authored
EV_HPD_INIT_SETUP flag is used to trigger the initialization of external DP host controller. Since external DP host controller initialization had been incorporated into pm_runtime_resume(), this flag became obsolete. msm_dp_irq_postinstall() which triggers EV_HPD_INIT_SETUP event is obsoleted accordingly. Changes in v4: -- reworded commit text -- drop EV_HPD_INIT_SETUP -- drop msm_dp_irq_postinstall() Changes in v3: -- drop EV_HPD_INIT_SETUP and msm_dp_irq_postinstall() Signed-off-by:
-
Kuogee Hsieh authored
Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v9: -- silent compiler warning message at dp_power_init() and dp_power_deinit() with W1 flag Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by:
-
Kuogee Hsieh authored
Original both parser->parse() and dp_power_client_init() are done at dp_display_bind() since eDP population is done at binding time. In the preparation of having eDP population done at probe() time, move both function from dp_display_bind() to dp_display_probe(). Changes in v6: -- move dp_power_client_deinit() to remove() Changes in v5: -- explain why parser->parse() and dp_power_client_init() are moved to probe time -- tear down sub modules if failed Changes in v4: -- split this patch out of "incorporate pm_runtime framework into DP driver" patch Signed-off-by:
-
Kuogee Hsieh authored
Currently DP driver use drm_helper_hpd_irq_event(), bypassing drm bridge framework, to report HPD status changes to user space frame work. Replace it with drm_bridge_hpd_notify() since DP driver is part of drm bridge. Signed-off-by:
-
Kuogee Hsieh authored
The is_connected flag is set to true after DP mainlink successfully finishes link training to enter into ST_MAINLINK_READY state rather than being set after the DP dongle is connected. Rename the is_connected flag with link_ready flag to match the state of DP driver's state machine. Changes in v5: -- reworded commit text according to review comments from change #4 Changes in v4: -- reworded commit text Signed-off-by:
-
Kuogee Hsieh authored
Currently the dp_display_request_irq() is executed at msm_dp_modeset_init() which ties irq registering to the DPU device's life cycle, while depending on resources that are released as the DP device is torn down. Move register DP driver irq handler to dp_display_probe() to have dp_display_irq_handler() IRQ tied with DP device. In addition, use platform_get_irq() to retrieve irq number from platform device directly. Changes in v5: -- reworded commit text as review comments at change #4 -- tear down component if failed at dp_display_request_irq() Changes in v4: -- delete dp->irq check at dp_display_request_irq() Changes in v3: -- move calling dp_display_irq_handler() to probe Signed-off-by:
-
Konrad Dybcio authored
Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are other connection paths: - a path that connects rotator block to the DDR. - a path that needs to be handled to ensure MDSS register access functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG interconnect. Describe these paths to allow using them in device trees and in the driver. [Konrad: rework for one vs two MDP paths, update examples] Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
The "qcom,dsi-ctrl-6g-qcm2290" has been deprecated in commit 0c0f65c6 ("dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC"), but the example hasn't been updated to reflect that. Fix that. Fixes: 0c0f65c6 ("dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC") Reviewed-by:
-
Dmitry Baryshkov authored
Flush queued events when disabling the crtc. This avoids timeouts when we come back and wait for dependencies (like the previous frame's flip_done). Fixes: c8afe684 ("drm/msm: basic KMS driver for snapdragon") Signed-off-by:
-
Krzysztof Kozlowski authored
Qualcomm SM8150 MDSS comes with a bit different 7nm DSI PHY with its own compatible. DTS already use it: sa8155p-adp.dtb: display-subsystem@ae00000: phy@ae94400:compatible:0: 'qcom,dsi-phy-7nm' was expected Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Patchwork: https://patchwork.freedesktop.org/patch/567178/ Link: https://lore.kernel.org/r/20231111142017.51922-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Document the DisplayPort controller node in MDSS binding, already used in DTS: sm8250-xiaomi-elish-boe.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('displayport-controller@ae90000' was unexpected) Signed-off-by: -
Dmitry Baryshkov authored
Change struct mdp4_lcdc_encoder allocation to use drmm_encoder_alloc(). This removes the need to perform any actions on this encoder destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Change struct mdp4_dtv_encoder allocation to use drmm_encoder_alloc(). This removes the need to perform any actions on this encoder destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Change struct mdp4_dsi_encoder allocation to use drmm_encoder_alloc(). This removes the need to perform any actions on this encoder destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Change struct mdp4_crtc allocation to use drmm_crtc_alloc(). This removes the need to perform any actions on CRTC destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Switch mdp4_lcdc_encoder to using regulator_bulk_* API instead of enumerating regulators by hand. Signed-off-by:
-
Dmitry Baryshkov authored
Change struct mdp5_encoder allocation to use drmm_encoder_alloc(). This removes the need to perform any actions on encoder destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Change struct mdp5_crtc allocation to use drmm_crtc_alloc(). This removes the need to perform any actions on CRTC destruction. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create INTF data structure. This allows us to remove corresponding kfree() call. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create SMP data structure. This allows us to remove corresponding kfree and drop mdp5_smp_destroy() function. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create pipe data structure. This allows us to remove corresponding kfree and drop mdp5_pipe_destroy() function. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create mixer data structure. This allows us to remove corresponding kfree and drop mdp5_mixer_destroy() function. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create CTL manager data structure. This allows us to remove corresponding kfree and drop mdp5_ctlm_destroy() function. Signed-off-by:
-
Dmitry Baryshkov authored
Use devm_kzalloc to create configuration data structure. This allows us to remove corresponding kfree and drop mdp5_cfg_destroy() function. Signed-off-by:
-
Dmitry Baryshkov authored
Currently there are two subdirs for DP debugfs files, e.g. DP-1, created by the drm core for the connector, and the msm_dp-DP-1, created by the DP driver itself. Merge those two, so that there are no extraneous connector-related subdirs. Reviewed-by:
-
- 01 Dec, 2023 4 commits
-
-
Arnd Bergmann authored
When QMP is in a loadable module, the A6xx GPU driver fails to link as built-in: x86_64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gmu.o: in function `a6xx_gmu_resume': a6xx_gmu.c:(.text+0xd62): undefined reference to `qmp_send' Add the usual dependency that still allows compiling without QMP but otherwise avoids the broken combination of options. Fixes: 88a0997f ("drm/msm/a6xx: Send ACD state to QMP at GMU resume") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Abhinav Kumar authored
To support high resolutions on sm8350, enable smartdma in its catalog. Signed-off-by:
-
Dmitry Baryshkov authored
Enable the SmartDMA / multirect support on the SM8450 platform to support higher resoltion modes. Reviewed-by:
-
Abhinav Kumar authored
It's certainly possible that for large resolutions a single DPU SSPP cannot process the image without exceeding the MDP clock limits but it can still process it in multirect mode because the source rectangles will get divided and can fall within the MDP clock limits. If the SSPP cannot process the image even in multirect mode, then it will be rejected in dpu_plane_atomic_check_pipe(). Hence try using multirect for resolutions which cannot be processed by a single SSPP without exceeding the MDP clock limits. changes in v2: - use crtc_state's adjusted_mode instead of mode - fix the UBWC condition to check maxlinewidth Signed-off-by:
-
- 25 Nov, 2023 2 commits
-
-
Danylo Piliaiev authored
KGSL doesn't support a690 so all reg values were the same as on a660. Now we know the values and they are different from the windows driver. This fixes hangs on D3D12 games and some CTS tests. Signed-off-by:
Danylo Piliaiev <dpiliaiev@igalia.com> Signed-off-by:
-
Danylo Piliaiev authored
Downstream always set BIT(7) Signed-off-by:
-
